| /* |
| * Device Tree Include file for Marvell Armada XP family SoC |
| * |
| * Copyright (C) 2012 Marvell |
| * |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| * |
| * Contains definitions specific to the Armada XP MV78260 SoC that are not |
| * common to all Armada XP SoCs. |
| */ |
| |
| #include "armada-xp.dtsi" |
| |
| / { |
| model = "Marvell Armada XP MV78260 SoC"; |
| compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; |
| |
| aliases { |
| gpio0 = &gpio0; |
| gpio1 = &gpio1; |
| gpio2 = &gpio2; |
| eth3 = ð3; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "marvell,sheeva-v7"; |
| reg = <0>; |
| clocks = <&cpuclk 0>; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "marvell,sheeva-v7"; |
| reg = <1>; |
| clocks = <&cpuclk 1>; |
| }; |
| }; |
| |
| soc { |
| /* |
| * MV78260 has 3 PCIe units Gen2.0: Two units can be |
| * configured as x4 or quad x1 lanes. One unit is |
| * x4 only. |
| */ |
| pcie-controller { |
| compatible = "marvell,armada-xp-pcie"; |
| status = "disabled"; |
| device_type = "pci"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| msi-parent = <&mpic>; |
| bus-range = <0x00 0xff>; |
| |
| ranges = |
| <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ |
| 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ |
| 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ |
| 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ |
| 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ |
| 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ |
| 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ |
| 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ |
| 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ |
| 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ |
| 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ |
| 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ |
| 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ |
| 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ |
| 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ |
| 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ |
| 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ |
| |
| 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ |
| 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ |
| 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ |
| 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ |
| 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ |
| 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ |
| 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ |
| 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ |
| |
| 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ |
| 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; |
| |
| pcie@1,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; |
| reg = <0x0800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 |
| 0x81000000 0 0 0x81000000 0x1 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 58>; |
| marvell,pcie-port = <0>; |
| marvell,pcie-lane = <0>; |
| clocks = <&gateclk 5>; |
| status = "disabled"; |
| }; |
| |
| pcie@2,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; |
| reg = <0x1000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 |
| 0x81000000 0 0 0x81000000 0x2 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 59>; |
| marvell,pcie-port = <0>; |
| marvell,pcie-lane = <1>; |
| clocks = <&gateclk 6>; |
| status = "disabled"; |
| }; |
| |
| pcie@3,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; |
| reg = <0x1800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 |
| 0x81000000 0 0 0x81000000 0x3 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 60>; |
| marvell,pcie-port = <0>; |
| marvell,pcie-lane = <2>; |
| clocks = <&gateclk 7>; |
| status = "disabled"; |
| }; |
| |
| pcie@4,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; |
| reg = <0x2000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 |
| 0x81000000 0 0 0x81000000 0x4 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 61>; |
| marvell,pcie-port = <0>; |
| marvell,pcie-lane = <3>; |
| clocks = <&gateclk 8>; |
| status = "disabled"; |
| }; |
| |
| pcie@5,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; |
| reg = <0x2800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 |
| 0x81000000 0 0 0x81000000 0x5 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 62>; |
| marvell,pcie-port = <1>; |
| marvell,pcie-lane = <0>; |
| clocks = <&gateclk 9>; |
| status = "disabled"; |
| }; |
| |
| pcie@6,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; |
| reg = <0x3000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 |
| 0x81000000 0 0 0x81000000 0x6 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 63>; |
| marvell,pcie-port = <1>; |
| marvell,pcie-lane = <1>; |
| clocks = <&gateclk 10>; |
| status = "disabled"; |
| }; |
| |
| pcie@7,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; |
| reg = <0x3800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 |
| 0x81000000 0 0 0x81000000 0x7 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 64>; |
| marvell,pcie-port = <1>; |
| marvell,pcie-lane = <2>; |
| clocks = <&gateclk 11>; |
| status = "disabled"; |
| }; |
| |
| pcie@8,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; |
| reg = <0x4000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 |
| 0x81000000 0 0 0x81000000 0x8 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 65>; |
| marvell,pcie-port = <1>; |
| marvell,pcie-lane = <3>; |
| clocks = <&gateclk 12>; |
| status = "disabled"; |
| }; |
| |
| pcie@9,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; |
| reg = <0x4800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 |
| 0x81000000 0 0 0x81000000 0x9 0 1 0>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &mpic 99>; |
| marvell,pcie-port = <2>; |
| marvell,pcie-lane = <0>; |
| clocks = <&gateclk 26>; |
| status = "disabled"; |
| }; |
| }; |
| |
| internal-regs { |
| pinctrl { |
| compatible = "marvell,mv78260-pinctrl"; |
| reg = <0x18000 0x38>; |
| |
| sdio_pins: sdio-pins { |
| marvell,pins = "mpp30", "mpp31", "mpp32", |
| "mpp33", "mpp34", "mpp35"; |
| marvell,function = "sd0"; |
| }; |
| }; |
| |
| gpio0: gpio@18100 { |
| compatible = "marvell,orion-gpio"; |
| reg = <0x18100 0x40>; |
| ngpios = <32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <82>, <83>, <84>, <85>; |
| }; |
| |
| gpio1: gpio@18140 { |
| compatible = "marvell,orion-gpio"; |
| reg = <0x18140 0x40>; |
| ngpios = <32>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <87>, <88>, <89>, <90>; |
| }; |
| |
| gpio2: gpio@18180 { |
| compatible = "marvell,orion-gpio"; |
| reg = <0x18180 0x40>; |
| ngpios = <3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <91>; |
| }; |
| |
| eth3: ethernet@34000 { |
| compatible = "marvell,armada-370-neta"; |
| reg = <0x34000 0x4000>; |
| interrupts = <14>; |
| clocks = <&gateclk 1>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| }; |
