blob: 7d9c340f7693a8ff950541213e7a0d4e8f61aa06 [file] [log] [blame]
/*
* Copyright © 2011 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* Authors:
* Jesse Barnes <jbarnes@virtuousgeek.org>
*
* New plane/sprite handling.
*
* The older chips had a separate interface for programming plane related
* registers; newer ones are much simpler and we can use the new DRM plane
* support.
*/
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_rect.h>
#include "intel_drv.h"
#include <drm/i915_drm.h>
#include "i915_drv.h"
static bool
format_is_yuv(uint32_t format)
{
switch (format) {
case DRM_FORMAT_YUYV:
case DRM_FORMAT_UYVY:
case DRM_FORMAT_VYUY:
case DRM_FORMAT_YVYU:
return true;
default:
return false;
}
}
static int usecs_to_scanlines(const struct drm_display_mode *mode, int usecs)
{
/* paranoia */
if (!mode->crtc_htotal)
return 1;
return DIV_ROUND_UP(usecs * mode->crtc_clock, 1000 * mode->crtc_htotal);
}
/**
* intel_pipe_update_start() - start update of a set of display registers
* @crtc: the crtc of which the registers are going to be updated
* @start_vbl_count: vblank counter return pointer used for error checking
*
* Mark the start of an update to pipe registers that should be updated
* atomically regarding vblank. If the next vblank will happens within
* the next 100 us, this function waits until the vblank passes.
*
* After a successful call to this function, interrupts will be disabled
* until a subsequent call to intel_pipe_update_end(). That is done to
* avoid random delays. The value written to @start_vbl_count should be
* supplied to intel_pipe_update_end() for error checking.
*
* Return: true if the call was successful
*/
bool intel_pipe_update_start(struct intel_crtc *crtc, uint32_t *start_vbl_count)
{
struct drm_device *dev = crtc->base.dev;
const struct drm_display_mode *mode = &crtc->config.adjusted_mode;
enum pipe pipe = crtc->pipe;
long timeout = msecs_to_jiffies_timeout(1);
int scanline, min, max, vblank_start;
wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
DEFINE_WAIT(wait);
vblank_start = mode->crtc_vblank_start;
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
vblank_start = DIV_ROUND_UP(vblank_start, 2);
/* FIXME needs to be calibrated sensibly */
min = vblank_start - usecs_to_scanlines(mode, 100);
max = vblank_start - 1;
if (min <= 0 || max <= 0)
return false;
if (WARN_ON(drm_vblank_get(dev, pipe)))
return false;
local_irq_disable();
trace_i915_pipe_update_start(crtc, min, max);
for (;;) {
/*
* prepare_to_wait() has a memory barrier, which guarantees
* other CPUs can see the task state update by the time we
* read the scanline.
*/
prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
scanline = intel_get_crtc_scanline(crtc);
if (scanline < min || scanline > max)
break;
if (timeout <= 0) {
DRM_ERROR("Potential atomic update failure on pipe %c\n",
pipe_name(crtc->pipe));
break;
}
local_irq_enable();
timeout = schedule_timeout(timeout);
local_irq_disable();
}
finish_wait(wq, &wait);
drm_vblank_put(dev, pipe);
*start_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
trace_i915_pipe_update_vblank_evaded(crtc, min, max, *start_vbl_count);
return true;
}
/**
* intel_pipe_update_end() - end update of a set of display registers
* @crtc: the crtc of which the registers were updated
* @start_vbl_count: start vblank counter (used for error checking)
*
* Mark the end of an update started with intel_pipe_update_start(). This
* re-enables interrupts and verifies the update was actually completed
* before a vblank using the value of @start_vbl_count.
*/
void intel_pipe_update_end(struct intel_crtc *crtc, u32 start_vbl_count)
{
struct drm_device *dev = crtc->base.dev;
enum pipe pipe = crtc->pipe;
u32 end_vbl_count = dev->driver->get_vblank_counter(dev, pipe);
trace_i915_pipe_update_end(crtc, end_vbl_count);
local_irq_enable();
if (start_vbl_count != end_vbl_count)
DRM_ERROR("Atomic update failure on pipe %c (start=%u end=%u)\n",
pipe_name(pipe), start_vbl_count, end_vbl_count);
}
static void intel_update_primary_plane(struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->base.dev->dev_private;
int reg = DSPCNTR(crtc->plane);
if (crtc->primary_enabled)
I915_WRITE(reg, I915_READ(reg) | DISPLAY_PLANE_ENABLE);
else
I915_WRITE(reg, I915_READ(reg) & ~DISPLAY_PLANE_ENABLE);
}
static void
skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = drm_plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane + 1;
u32 plane_ctl, stride;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
/* Mask out pixel format bits in case we change it */
plane_ctl &= ~PLANE_CTL_FORMAT_MASK;
plane_ctl &= ~PLANE_CTL_ORDER_RGBX;
plane_ctl &= ~PLANE_CTL_YUV422_ORDER_MASK;
plane_ctl &= ~PLANE_CTL_TILED_MASK;
plane_ctl &= ~PLANE_CTL_ALPHA_MASK;
plane_ctl &= ~PLANE_CTL_ROTATE_MASK;
/* Trickle feed has to be enabled */
plane_ctl &= ~PLANE_CTL_TRICKLE_FEED_DISABLE;
switch (fb->pixel_format) {
case DRM_FORMAT_RGB565:
plane_ctl |= PLANE_CTL_FORMAT_RGB_565;
break;
case DRM_FORMAT_XBGR8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
break;
case DRM_FORMAT_XRGB8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888;
break;
/*
* XXX: For ARBG/ABGR formats we default to expecting scanout buffers
* to be already pre-multiplied. We need to add a knob (or a different
* DRM_FORMAT) for user-space to configure that.
*/
case DRM_FORMAT_ABGR8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 |
PLANE_CTL_ORDER_RGBX |
PLANE_CTL_ALPHA_SW_PREMULTIPLY;
break;
case DRM_FORMAT_ARGB8888:
plane_ctl |= PLANE_CTL_FORMAT_XRGB_8888 |
PLANE_CTL_ALPHA_SW_PREMULTIPLY;
break;
case DRM_FORMAT_YUYV:
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
break;
case DRM_FORMAT_YVYU:
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
break;
case DRM_FORMAT_UYVY:
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
break;
case DRM_FORMAT_VYUY:
plane_ctl |= PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
break;
default:
BUG();
}
switch (obj->tiling_mode) {
case I915_TILING_NONE:
stride = fb->pitches[0] >> 6;
break;
case I915_TILING_X:
plane_ctl |= PLANE_CTL_TILED_X;
stride = fb->pitches[0] >> 9;
break;
default:
BUG();
}
if (intel_plane->rotation == BIT(DRM_ROTATE_180))
plane_ctl |= PLANE_CTL_ROTATE_180;
plane_ctl |= PLANE_CTL_ENABLE;
plane_ctl |= PLANE_CTL_PIPE_CSC_ENABLE;
intel_update_sprite_watermarks(drm_plane, crtc, src_w, src_h,
pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
I915_WRITE(PLANE_OFFSET(pipe, plane), (y << 16) | x);
I915_WRITE(PLANE_STRIDE(pipe, plane), stride);
I915_WRITE(PLANE_POS(pipe, plane), (crtc_y << 16) | crtc_x);
I915_WRITE(PLANE_SIZE(pipe, plane), (crtc_h << 16) | crtc_w);
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
I915_WRITE(PLANE_SURF(pipe, plane), i915_gem_obj_ggtt_offset(obj));
POSTING_READ(PLANE_SURF(pipe, plane));
}
static void
skl_disable_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc)
{
struct drm_device *dev = drm_plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane + 1;
I915_WRITE(PLANE_CTL(pipe, plane),
I915_READ(PLANE_CTL(pipe, plane)) & ~PLANE_CTL_ENABLE);
/* Activate double buffered register update */
I915_WRITE(PLANE_CTL(pipe, plane), 0);
POSTING_READ(PLANE_CTL(pipe, plane));
intel_update_sprite_watermarks(drm_plane, crtc, 0, 0, 0, false, false);
}
static int
skl_update_colorkey(struct drm_plane *drm_plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = drm_plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane;
u32 plane_ctl;
I915_WRITE(PLANE_KEYVAL(pipe, plane), key->min_value);
I915_WRITE(PLANE_KEYMAX(pipe, plane), key->max_value);
I915_WRITE(PLANE_KEYMSK(pipe, plane), key->channel_mask);
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
plane_ctl &= ~PLANE_CTL_KEY_ENABLE_MASK;
if (key->flags & I915_SET_COLORKEY_DESTINATION)
plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION;
else if (key->flags & I915_SET_COLORKEY_SOURCE)
plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
I915_WRITE(PLANE_CTL(pipe, plane), plane_ctl);
POSTING_READ(PLANE_CTL(pipe, plane));
return 0;
}
static void
skl_get_colorkey(struct drm_plane *drm_plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = drm_plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(drm_plane);
const int pipe = intel_plane->pipe;
const int plane = intel_plane->plane;
u32 plane_ctl;
key->min_value = I915_READ(PLANE_KEYVAL(pipe, plane));
key->max_value = I915_READ(PLANE_KEYMAX(pipe, plane));
key->channel_mask = I915_READ(PLANE_KEYMSK(pipe, plane));
plane_ctl = I915_READ(PLANE_CTL(pipe, plane));
switch (plane_ctl & PLANE_CTL_KEY_ENABLE_MASK) {
case PLANE_CTL_KEY_ENABLE_DESTINATION:
key->flags = I915_SET_COLORKEY_DESTINATION;
break;
case PLANE_CTL_KEY_ENABLE_SOURCE:
key->flags = I915_SET_COLORKEY_SOURCE;
break;
default:
key->flags = I915_SET_COLORKEY_NONE;
}
}
static void
chv_update_csc(struct intel_plane *intel_plane, uint32_t format)
{
struct drm_i915_private *dev_priv = intel_plane->base.dev->dev_private;
int plane = intel_plane->plane;
/* Seems RGB data bypasses the CSC always */
if (!format_is_yuv(format))
return;
/*
* BT.601 limited range YCbCr -> full range RGB
*
* |r| | 6537 4769 0| |cr |
* |g| = |-3330 4769 -1605| x |y-64|
* |b| | 0 4769 8263| |cb |
*
* Cb and Cr apparently come in as signed already, so no
* need for any offset. For Y we need to remove the offset.
*/
I915_WRITE(SPCSCYGOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(-64));
I915_WRITE(SPCSCCBOFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0));
I915_WRITE(SPCSCCROFF(plane), SPCSC_OOFF(0) | SPCSC_IOFF(0));
I915_WRITE(SPCSCC01(plane), SPCSC_C1(4769) | SPCSC_C0(6537));
I915_WRITE(SPCSCC23(plane), SPCSC_C1(-3330) | SPCSC_C0(0));
I915_WRITE(SPCSCC45(plane), SPCSC_C1(-1605) | SPCSC_C0(4769));
I915_WRITE(SPCSCC67(plane), SPCSC_C1(4769) | SPCSC_C0(0));
I915_WRITE(SPCSCC8(plane), SPCSC_C0(8263));
I915_WRITE(SPCSCYGICLAMP(plane), SPCSC_IMAX(940) | SPCSC_IMIN(64));
I915_WRITE(SPCSCCBICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
I915_WRITE(SPCSCCRICLAMP(plane), SPCSC_IMAX(448) | SPCSC_IMIN(-448));
I915_WRITE(SPCSCYGOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
I915_WRITE(SPCSCCBOCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
I915_WRITE(SPCSCCROCLAMP(plane), SPCSC_OMAX(1023) | SPCSC_OMIN(0));
}
static void
vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
unsigned long sprsurf_offset, linear_offset;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
u32 start_vbl_count;
bool atomic_update;
sprctl = I915_READ(SPCNTR(pipe, plane));
/* Mask out pixel format bits in case we change it */
sprctl &= ~SP_PIXFORMAT_MASK;
sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
sprctl &= ~SP_TILED;
sprctl &= ~SP_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_YUYV:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
sprctl |= SP_FORMAT_YUV422 | SP_YUV_ORDER_VYUY;
break;
case DRM_FORMAT_RGB565:
sprctl |= SP_FORMAT_BGR565;
break;
case DRM_FORMAT_XRGB8888:
sprctl |= SP_FORMAT_BGRX8888;
break;
case DRM_FORMAT_ARGB8888:
sprctl |= SP_FORMAT_BGRA8888;
break;
case DRM_FORMAT_XBGR2101010:
sprctl |= SP_FORMAT_RGBX1010102;
break;
case DRM_FORMAT_ABGR2101010:
sprctl |= SP_FORMAT_RGBA1010102;
break;
case DRM_FORMAT_XBGR8888:
sprctl |= SP_FORMAT_RGBX8888;
break;
case DRM_FORMAT_ABGR8888:
sprctl |= SP_FORMAT_RGBA8888;
break;
default:
/*
* If we get here one of the upper layers failed to filter
* out the unsupported plane formats
*/
BUG();
break;
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
sprctl |= SP_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
sprctl |= SP_TILED;
sprctl |= SP_ENABLE;
intel_update_sprite_watermarks(dplane, crtc, src_w, src_h,
pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
linear_offset = y * fb->pitches[0] + x * pixel_size;
sprsurf_offset = intel_gen4_compute_page_offset(&x, &y,
obj->tiling_mode,
pixel_size,
fb->pitches[0]);
linear_offset -= sprsurf_offset;
if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
sprctl |= SP_ROTATE_180;
x += src_w;
y += src_h;
linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
}
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
if (IS_CHERRYVIEW(dev) && pipe == PIPE_B)
chv_update_csc(intel_plane, fb->pixel_format);
I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]);
I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x);
if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(SPTILEOFF(pipe, plane), (y << 16) | x);
else
I915_WRITE(SPLINOFF(pipe, plane), linear_offset);
I915_WRITE(SPCONSTALPHA(pipe, plane), 0);
I915_WRITE(SPSIZE(pipe, plane), (crtc_h << 16) | crtc_w);
I915_WRITE(SPCNTR(pipe, plane), sprctl);
I915_WRITE(SPSURF(pipe, plane), i915_gem_obj_ggtt_offset(obj) +
sprsurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
vlv_disable_plane(struct drm_plane *dplane, struct drm_crtc *crtc)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 start_vbl_count;
bool atomic_update;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPCNTR(pipe, plane), I915_READ(SPCNTR(pipe, plane)) &
~SP_ENABLE);
/* Activate double buffered register update */
I915_WRITE(SPSURF(pipe, plane), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
intel_update_sprite_watermarks(dplane, crtc, 0, 0, 0, false, false);
}
static int
vlv_update_colorkey(struct drm_plane *dplane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
if (key->flags & I915_SET_COLORKEY_DESTINATION)
return -EINVAL;
I915_WRITE(SPKEYMINVAL(pipe, plane), key->min_value);
I915_WRITE(SPKEYMAXVAL(pipe, plane), key->max_value);
I915_WRITE(SPKEYMSK(pipe, plane), key->channel_mask);
sprctl = I915_READ(SPCNTR(pipe, plane));
sprctl &= ~SP_SOURCE_KEY;
if (key->flags & I915_SET_COLORKEY_SOURCE)
sprctl |= SP_SOURCE_KEY;
I915_WRITE(SPCNTR(pipe, plane), sprctl);
POSTING_READ(SPKEYMSK(pipe, plane));
return 0;
}
static void
vlv_get_colorkey(struct drm_plane *dplane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = dplane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(dplane);
int pipe = intel_plane->pipe;
int plane = intel_plane->plane;
u32 sprctl;
key->min_value = I915_READ(SPKEYMINVAL(pipe, plane));
key->max_value = I915_READ(SPKEYMAXVAL(pipe, plane));
key->channel_mask = I915_READ(SPKEYMSK(pipe, plane));
sprctl = I915_READ(SPCNTR(pipe, plane));
if (sprctl & SP_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static void
ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
u32 sprctl, sprscale = 0;
unsigned long sprsurf_offset, linear_offset;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
u32 start_vbl_count;
bool atomic_update;
sprctl = I915_READ(SPRCTL(pipe));
/* Mask out pixel format bits in case we change it */
sprctl &= ~SPRITE_PIXFORMAT_MASK;
sprctl &= ~SPRITE_RGB_ORDER_RGBX;
sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
sprctl &= ~SPRITE_TILED;
sprctl &= ~SPRITE_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_XBGR8888:
sprctl |= SPRITE_FORMAT_RGBX888 | SPRITE_RGB_ORDER_RGBX;
break;
case DRM_FORMAT_XRGB8888:
sprctl |= SPRITE_FORMAT_RGBX888;
break;
case DRM_FORMAT_YUYV:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
sprctl |= SPRITE_FORMAT_YUV422 | SPRITE_YUV_ORDER_VYUY;
break;
default:
BUG();
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
sprctl |= SPRITE_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
sprctl |= SPRITE_TILED;
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
sprctl &= ~SPRITE_TRICKLE_FEED_DISABLE;
else
sprctl |= SPRITE_TRICKLE_FEED_DISABLE;
sprctl |= SPRITE_ENABLE;
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
sprctl |= SPRITE_PIPE_CSC_ENABLE;
intel_update_sprite_watermarks(plane, crtc, src_w, src_h, pixel_size,
true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
if (crtc_w != src_w || crtc_h != src_h)
sprscale = SPRITE_SCALE_ENABLE | (src_w << 16) | src_h;
linear_offset = y * fb->pitches[0] + x * pixel_size;
sprsurf_offset =
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
pixel_size, fb->pitches[0]);
linear_offset -= sprsurf_offset;
if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
sprctl |= SPRITE_ROTATE_180;
/* HSW and BDW does this automagically in hardware */
if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
x += src_w;
y += src_h;
linear_offset += src_h * fb->pitches[0] +
src_w * pixel_size;
}
}
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
/* HSW consolidates SPRTILEOFF and SPRLINOFF into a single SPROFFSET
* register */
if (IS_HASWELL(dev) || IS_BROADWELL(dev))
I915_WRITE(SPROFFSET(pipe), (y << 16) | x);
else if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
else
I915_WRITE(SPRLINOFF(pipe), linear_offset);
I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
if (intel_plane->can_scale)
I915_WRITE(SPRSCALE(pipe), sprscale);
I915_WRITE(SPRCTL(pipe), sprctl);
I915_WRITE(SPRSURF(pipe),
i915_gem_obj_ggtt_offset(obj) + sprsurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
ivb_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
u32 start_vbl_count;
bool atomic_update;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(SPRCTL(pipe), I915_READ(SPRCTL(pipe)) & ~SPRITE_ENABLE);
/* Can't leave the scaler enabled... */
if (intel_plane->can_scale)
I915_WRITE(SPRSCALE(pipe), 0);
/* Activate double buffered register update */
I915_WRITE(SPRSURF(pipe), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
/*
* Avoid underruns when disabling the sprite.
* FIXME remove once watermark updates are done properly.
*/
intel_wait_for_vblank(dev, pipe);
intel_update_sprite_watermarks(plane, crtc, 0, 0, 0, false, false);
}
static int
ivb_update_colorkey(struct drm_plane *plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 sprctl;
int ret = 0;
intel_plane = to_intel_plane(plane);
I915_WRITE(SPRKEYVAL(intel_plane->pipe), key->min_value);
I915_WRITE(SPRKEYMAX(intel_plane->pipe), key->max_value);
I915_WRITE(SPRKEYMSK(intel_plane->pipe), key->channel_mask);
sprctl = I915_READ(SPRCTL(intel_plane->pipe));
sprctl &= ~(SPRITE_SOURCE_KEY | SPRITE_DEST_KEY);
if (key->flags & I915_SET_COLORKEY_DESTINATION)
sprctl |= SPRITE_DEST_KEY;
else if (key->flags & I915_SET_COLORKEY_SOURCE)
sprctl |= SPRITE_SOURCE_KEY;
I915_WRITE(SPRCTL(intel_plane->pipe), sprctl);
POSTING_READ(SPRKEYMSK(intel_plane->pipe));
return ret;
}
static void
ivb_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 sprctl;
intel_plane = to_intel_plane(plane);
key->min_value = I915_READ(SPRKEYVAL(intel_plane->pipe));
key->max_value = I915_READ(SPRKEYMAX(intel_plane->pipe));
key->channel_mask = I915_READ(SPRKEYMSK(intel_plane->pipe));
key->flags = 0;
sprctl = I915_READ(SPRCTL(intel_plane->pipe));
if (sprctl & SPRITE_DEST_KEY)
key->flags = I915_SET_COLORKEY_DESTINATION;
else if (sprctl & SPRITE_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static void
ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_i915_gem_object *obj, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t x, uint32_t y,
uint32_t src_w, uint32_t src_h)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
unsigned long dvssurf_offset, linear_offset;
u32 dvscntr, dvsscale;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
u32 start_vbl_count;
bool atomic_update;
dvscntr = I915_READ(DVSCNTR(pipe));
/* Mask out pixel format bits in case we change it */
dvscntr &= ~DVS_PIXFORMAT_MASK;
dvscntr &= ~DVS_RGB_ORDER_XBGR;
dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
dvscntr &= ~DVS_TILED;
dvscntr &= ~DVS_ROTATE_180;
switch (fb->pixel_format) {
case DRM_FORMAT_XBGR8888:
dvscntr |= DVS_FORMAT_RGBX888 | DVS_RGB_ORDER_XBGR;
break;
case DRM_FORMAT_XRGB8888:
dvscntr |= DVS_FORMAT_RGBX888;
break;
case DRM_FORMAT_YUYV:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YUYV;
break;
case DRM_FORMAT_YVYU:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_YVYU;
break;
case DRM_FORMAT_UYVY:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_UYVY;
break;
case DRM_FORMAT_VYUY:
dvscntr |= DVS_FORMAT_YUV422 | DVS_YUV_ORDER_VYUY;
break;
default:
BUG();
}
/*
* Enable gamma to match primary/cursor plane behaviour.
* FIXME should be user controllable via propertiesa.
*/
dvscntr |= DVS_GAMMA_ENABLE;
if (obj->tiling_mode != I915_TILING_NONE)
dvscntr |= DVS_TILED;
if (IS_GEN6(dev))
dvscntr |= DVS_TRICKLE_FEED_DISABLE; /* must disable */
dvscntr |= DVS_ENABLE;
intel_update_sprite_watermarks(plane, crtc, src_w, src_h,
pixel_size, true,
src_w != crtc_w || src_h != crtc_h);
/* Sizes are 0 based */
src_w--;
src_h--;
crtc_w--;
crtc_h--;
dvsscale = 0;
if (crtc_w != src_w || crtc_h != src_h)
dvsscale = DVS_SCALE_ENABLE | (src_w << 16) | src_h;
linear_offset = y * fb->pitches[0] + x * pixel_size;
dvssurf_offset =
intel_gen4_compute_page_offset(&x, &y, obj->tiling_mode,
pixel_size, fb->pitches[0]);
linear_offset -= dvssurf_offset;
if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
dvscntr |= DVS_ROTATE_180;
x += src_w;
y += src_h;
linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
}
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
if (obj->tiling_mode != I915_TILING_NONE)
I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x);
else
I915_WRITE(DVSLINOFF(pipe), linear_offset);
I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
I915_WRITE(DVSSCALE(pipe), dvsscale);
I915_WRITE(DVSCNTR(pipe), dvscntr);
I915_WRITE(DVSSURF(pipe),
i915_gem_obj_ggtt_offset(obj) + dvssurf_offset);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
}
static void
ilk_disable_plane(struct drm_plane *plane, struct drm_crtc *crtc)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_plane->pipe;
u32 start_vbl_count;
bool atomic_update;
atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
intel_update_primary_plane(intel_crtc);
I915_WRITE(DVSCNTR(pipe), I915_READ(DVSCNTR(pipe)) & ~DVS_ENABLE);
/* Disable the scaler */
I915_WRITE(DVSSCALE(pipe), 0);
/* Flush double buffered register updates */
I915_WRITE(DVSSURF(pipe), 0);
intel_flush_primary_plane(dev_priv, intel_crtc->plane);
if (atomic_update)
intel_pipe_update_end(intel_crtc, start_vbl_count);
/*
* Avoid underruns when disabling the sprite.
* FIXME remove once watermark updates are done properly.
*/
intel_wait_for_vblank(dev, pipe);
intel_update_sprite_watermarks(plane, crtc, 0, 0, 0, false, false);
}
static void
intel_post_enable_primary(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
/*
* BDW signals flip done immediately if the plane
* is disabled, even if the plane enable is already
* armed to occur at the next vblank :(
*/
if (IS_BROADWELL(dev))
intel_wait_for_vblank(dev, intel_crtc->pipe);
/*
* FIXME IPS should be fine as long as one plane is
* enabled, but in practice it seems to have problems
* when going from primary only to sprite only and vice
* versa.
*/
hsw_enable_ips(intel_crtc);
mutex_lock(&dev->struct_mutex);
intel_update_fbc(dev);
mutex_unlock(&dev->struct_mutex);
}
static void
intel_pre_disable_primary(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
mutex_lock(&dev->struct_mutex);
if (dev_priv->fbc.plane == intel_crtc->plane)
intel_disable_fbc(dev);
mutex_unlock(&dev->struct_mutex);
/*
* FIXME IPS should be fine as long as one plane is
* enabled, but in practice it seems to have problems
* when going from primary only to sprite only and vice
* versa.
*/
hsw_disable_ips(intel_crtc);
}
static int
ilk_update_colorkey(struct drm_plane *plane,
struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 dvscntr;
int ret = 0;
intel_plane = to_intel_plane(plane);
I915_WRITE(DVSKEYVAL(intel_plane->pipe), key->min_value);
I915_WRITE(DVSKEYMAX(intel_plane->pipe), key->max_value);
I915_WRITE(DVSKEYMSK(intel_plane->pipe), key->channel_mask);
dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
dvscntr &= ~(DVS_SOURCE_KEY | DVS_DEST_KEY);
if (key->flags & I915_SET_COLORKEY_DESTINATION)
dvscntr |= DVS_DEST_KEY;
else if (key->flags & I915_SET_COLORKEY_SOURCE)
dvscntr |= DVS_SOURCE_KEY;
I915_WRITE(DVSCNTR(intel_plane->pipe), dvscntr);
POSTING_READ(DVSKEYMSK(intel_plane->pipe));
return ret;
}
static void
ilk_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
{
struct drm_device *dev = plane->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_plane *intel_plane;
u32 dvscntr;
intel_plane = to_intel_plane(plane);
key->min_value = I915_READ(DVSKEYVAL(intel_plane->pipe));
key->max_value = I915_READ(DVSKEYMAX(intel_plane->pipe));
key->channel_mask = I915_READ(DVSKEYMSK(intel_plane->pipe));
key->flags = 0;
dvscntr = I915_READ(DVSCNTR(intel_plane->pipe));
if (dvscntr & DVS_DEST_KEY)
key->flags = I915_SET_COLORKEY_DESTINATION;
else if (dvscntr & DVS_SOURCE_KEY)
key->flags = I915_SET_COLORKEY_SOURCE;
else
key->flags = I915_SET_COLORKEY_NONE;
}
static bool colorkey_enabled(struct intel_plane *intel_plane)
{
struct drm_intel_sprite_colorkey key;
intel_plane->get_colorkey(&intel_plane->base, &key);
return key.flags != I915_SET_COLORKEY_NONE;
}
static int
intel_check_sprite_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
struct intel_crtc *intel_crtc = to_intel_crtc(state->crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
struct drm_framebuffer *fb = state->fb;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
int crtc_x, crtc_y;
unsigned int crtc_w, crtc_h;
uint32_t src_x, src_y, src_w, src_h;
struct drm_rect *src = &state->src;
struct drm_rect *dst = &state->dst;
struct drm_rect *orig_src = &state->orig_src;
const struct drm_rect *clip = &state->clip;
int hscale, vscale;
int max_scale, min_scale;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
/* Don't modify another pipe's plane */
if (intel_plane->pipe != intel_crtc->pipe) {
DRM_DEBUG_KMS("Wrong plane <-> crtc mapping\n");
return -EINVAL;
}
/* FIXME check all gen limits */
if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) {
DRM_DEBUG_KMS("Unsuitable framebuffer for plane\n");
return -EINVAL;
}
/* Sprite planes can be linear or x-tiled surfaces */
switch (obj->tiling_mode) {
case I915_TILING_NONE:
case I915_TILING_X:
break;
default:
DRM_DEBUG_KMS("Unsupported tiling mode\n");
return -EINVAL;
}
/*
* FIXME the following code does a bunch of fuzzy adjustments to the
* coordinates and sizes. We probably need some way to decide whether
* more strict checking should be done instead.
*/
max_scale = intel_plane->max_downscale << 16;
min_scale = intel_plane->can_scale ? 1 : (1 << 16);
drm_rect_rotate(src, fb->width << 16, fb->height << 16,
intel_plane->rotation);
hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
BUG_ON(hscale < 0);
vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
BUG_ON(vscale < 0);
state->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
crtc_x = dst->x1;
crtc_y = dst->y1;
crtc_w = drm_rect_width(dst);
crtc_h = drm_rect_height(dst);
if (state->visible) {
/* check again in case clipping clamped the results */
hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
if (hscale < 0) {
DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
drm_rect_debug_print(src, true);
drm_rect_debug_print(dst, false);
return hscale;
}
vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
if (vscale < 0) {
DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
drm_rect_debug_print(src, true);
drm_rect_debug_print(dst, false);
return vscale;
}
/* Make the source viewport size an exact multiple of the scaling factors. */
drm_rect_adjust_size(src,
drm_rect_width(dst) * hscale - drm_rect_width(src),
drm_rect_height(dst) * vscale - drm_rect_height(src));
drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
intel_plane->rotation);
/* sanity check to make sure the src viewport wasn't enlarged */
WARN_ON(src->x1 < (int) orig_src->x1 ||
src->y1 < (int) orig_src->y1 ||
src->x2 > (int) orig_src->x2 ||
src->y2 > (int) orig_src->y2);
/*
* Hardware doesn't handle subpixel coordinates.
* Adjust to (macro)pixel boundary, but be careful not to
* increase the source viewport size, because that could
* push the downscaling factor out of bounds.
*/
src_x = src->x1 >> 16;
src_w = drm_rect_width(src) >> 16;
src_y = src->y1 >> 16;
src_h = drm_rect_height(src) >> 16;
if (format_is_yuv(fb->pixel_format)) {
src_x &= ~1;
src_w &= ~1;
/*
* Must keep src and dst the
* same if we can't scale.
*/
if (!intel_plane->can_scale)
crtc_w &= ~1;
if (crtc_w == 0)
state->visible = false;
}
}
/* Check size restrictions when scaling */
if (state->visible && (src_w != crtc_w || src_h != crtc_h)) {
unsigned int width_bytes;
WARN_ON(!intel_plane->can_scale);
/* FIXME interlacing min height is 6 */
if (crtc_w < 3 || crtc_h < 3)
state->visible = false;
if (src_w < 3 || src_h < 3)
state->visible = false;
width_bytes = ((src_x * pixel_size) & 63) +
src_w * pixel_size;
if (src_w > 2048 || src_h > 2048 ||
width_bytes > 4096 || fb->pitches[0] > 4096) {
DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
return -EINVAL;
}
}
if (state->visible) {
src->x1 = src_x;
src->x2 = src_x + src_w;
src->y1 = src_y;
src->y2 = src_y + src_h;
}
dst->x1 = crtc_x;
dst->x2 = crtc_x + crtc_w;
dst->y1 = crtc_y;
dst->y2 = crtc_y + crtc_h;
return 0;
}
static int
intel_prepare_sprite_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
struct drm_device *dev = plane->dev;
struct drm_crtc *crtc = state->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
enum pipe pipe = intel_crtc->pipe;
struct drm_framebuffer *fb = state->fb;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
struct drm_i915_gem_object *old_obj = intel_plane->obj;
int ret;
if (old_obj != obj) {
mutex_lock(&dev->struct_mutex);
/* Note that this will apply the VT-d workaround for scanouts,
* which is more restrictive than required for sprites. (The
* primary plane requires 256KiB alignment with 64 PTE padding,
* the sprite planes only require 128KiB alignment and 32 PTE
* padding.
*/
ret = intel_pin_and_fence_fb_obj(plane, fb, NULL);
if (ret == 0)
i915_gem_track_fb(old_obj, obj,
INTEL_FRONTBUFFER_SPRITE(pipe));
mutex_unlock(&dev->struct_mutex);
if (ret)
return ret;
}
return 0;
}
static void
intel_commit_sprite_plane(struct drm_plane *plane,
struct intel_plane_state *state)
{
struct drm_device *dev = plane->dev;
struct drm_crtc *crtc = state->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
enum pipe pipe = intel_crtc->pipe;
struct drm_framebuffer *fb = state->fb;
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
struct drm_i915_gem_object *old_obj = intel_plane->obj;
int crtc_x, crtc_y;
unsigned int crtc_w, crtc_h;
uint32_t src_x, src_y, src_w, src_h;
struct drm_rect *dst = &state->dst;
const struct drm_rect *clip = &state->clip;
bool primary_enabled;
/*
* If the sprite is completely covering the primary plane,
* we can disable the primary and save power.
*/
primary_enabled = !drm_rect_equals(dst, clip) || colorkey_enabled(intel_plane);
WARN_ON(!primary_enabled && !state->visible && intel_crtc->active);
intel_plane->crtc_x = state->orig_dst.x1;
intel_plane->crtc_y = state->orig_dst.y1;
intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
intel_plane->src_x = state->orig_src.x1;
intel_plane->src_y = state->orig_src.y1;
intel_plane->src_w = drm_rect_width(&state->orig_src);
intel_plane->src_h = drm_rect_height(&state->orig_src);
intel_plane->obj = obj;
if (intel_crtc->active) {
bool primary_was_enabled = intel_crtc->primary_enabled;
intel_crtc->primary_enabled = primary_enabled;
if (primary_was_enabled != primary_enabled)
intel_crtc_wait_for_pending_flips(crtc);
if (primary_was_enabled && !primary_enabled)
intel_pre_disable_primary(crtc);
if (state->visible) {
crtc_x = state->dst.x1;
crtc_y = state->dst.y1;
crtc_w = drm_rect_width(&state->dst);
crtc_h = drm_rect_height(&state->dst);
src_x = state->src.x1;
src_y = state->src.y1;
src_w = drm_rect_width(&state->src);
src_h = drm_rect_height(&state->src);
intel_plane->update_plane(plane, crtc, fb, obj,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
} else {
intel_plane->disable_plane(plane, crtc);
}
intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_SPRITE(pipe));
if (!primary_was_enabled && primary_enabled)
intel_post_enable_primary(crtc);
}
/* Unpin old obj after new one is active to avoid ugliness */
if (old_obj && old_obj != obj) {
/*
* It's fairly common to simply update the position of
* an existing object. In that case, we don't need to
* wait for vblank to avoid ugliness, we only need to
* do the pin & ref bookkeeping.
*/
if (intel_crtc->active)
intel_wait_for_vblank(dev, intel_crtc->pipe);
mutex_lock(&dev->struct_mutex);
intel_unpin_fb_obj(old_obj);
mutex_unlock(&dev->struct_mutex);
}
}
static int
intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
struct drm_framebuffer *fb, int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h)
{
struct intel_plane_state state;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int ret;
state.crtc = crtc;
state.fb = fb;
/* sample coordinates in 16.16 fixed point */
state.src.x1 = src_x;
state.src.x2 = src_x + src_w;
state.src.y1 = src_y;
state.src.y2 = src_y + src_h;
/* integer pixels */
state.dst.x1 = crtc_x;
state.dst.x2 = crtc_x + crtc_w;
state.dst.y1 = crtc_y;
state.dst.y2 = crtc_y + crtc_h;
state.clip.x1 = 0;
state.clip.y1 = 0;
state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
state.orig_src = state.src;
state.orig_dst = state.dst;
ret = intel_check_sprite_plane(plane, &state);
if (ret)
return ret;
ret = intel_prepare_sprite_plane(plane, &state);
if (ret)
return ret;
intel_commit_sprite_plane(plane, &state);
return 0;
}
static int
intel_disable_plane(struct drm_plane *plane)
{
struct drm_device *dev = plane->dev;
struct intel_plane *intel_plane = to_intel_plane(plane);
struct intel_crtc *intel_crtc;
enum pipe pipe;
if (!plane->fb)
return 0;
if (WARN_ON(!plane->crtc))
return -EINVAL;
intel_crtc = to_intel_crtc(plane->crtc);
pipe = intel_crtc->pipe;
if (intel_crtc->active) {
bool primary_was_enabled = intel_crtc->primary_enabled;
intel_crtc->primary_enabled = true;
intel_plane->disable_plane(plane, plane->crtc);
if (!primary_was_enabled && intel_crtc->primary_enabled)
intel_post_enable_primary(plane->crtc);
}
if (intel_plane->obj) {
if (intel_crtc->active)
intel_wait_for_vblank(dev, intel_plane->pipe);
mutex_lock(&dev->struct_mutex);
intel_unpin_fb_obj(intel_plane->obj);
i915_gem_track_fb(intel_plane->obj, NULL,
INTEL_FRONTBUFFER_SPRITE(pipe));
mutex_unlock(&dev->struct_mutex);
intel_plane->obj = NULL;
}
return 0;
}
static void intel_destroy_plane(struct drm_plane *plane)
{
struct intel_plane *intel_plane = to_intel_plane(plane);
intel_disable_plane(plane);
drm_plane_cleanup(plane);
kfree(intel_plane);
}
int intel_sprite_set_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_intel_sprite_colorkey *set = data;
struct drm_plane *plane;
struct intel_plane *intel_plane;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
/* Make sure we don't try to enable both src & dest simultaneously */
if ((set->flags & (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE)) == (I915_SET_COLORKEY_DESTINATION | I915_SET_COLORKEY_SOURCE))
return -EINVAL;
drm_modeset_lock_all(dev);
plane = drm_plane_find(dev, set->plane_id);
if (!plane) {
ret = -ENOENT;
goto out_unlock;
}
intel_plane = to_intel_plane(plane);
ret = intel_plane->update_colorkey(plane, set);
out_unlock:
drm_modeset_unlock_all(dev);
return ret;
}
int intel_sprite_get_colorkey(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_intel_sprite_colorkey *get = data;
struct drm_plane *plane;
struct intel_plane *intel_plane;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -ENODEV;
drm_modeset_lock_all(dev);
plane = drm_plane_find(dev, get->plane_id);
if (!plane) {
ret = -ENOENT;
goto out_unlock;
}
intel_plane = to_intel_plane(plane);
intel_plane->get_colorkey(plane, get);
out_unlock:
drm_modeset_unlock_all(dev);
return ret;
}
int intel_plane_set_property(struct drm_plane *plane,
struct drm_property *prop,
uint64_t val)
{
struct drm_device *dev = plane->dev;
struct intel_plane *intel_plane = to_intel_plane(plane);
uint64_t old_val;
int ret = -ENOENT;
if (prop == dev->mode_config.rotation_property) {
/* exactly one rotation angle please */
if (hweight32(val & 0xf) != 1)
return -EINVAL;
if (intel_plane->rotation == val)
return 0;
old_val = intel_plane->rotation;
intel_plane->rotation = val;
ret = intel_plane_restore(plane);
if (ret)
intel_plane->rotation = old_val;
}
return ret;
}
int intel_plane_restore(struct drm_plane *plane)
{
struct intel_plane *intel_plane = to_intel_plane(plane);
if (!plane->crtc || !plane->fb)
return 0;
return plane->funcs->update_plane(plane, plane->crtc, plane->fb,
intel_plane->crtc_x, intel_plane->crtc_y,
intel_plane->crtc_w, intel_plane->crtc_h,
intel_plane->src_x, intel_plane->src_y,
intel_plane->src_w, intel_plane->src_h);
}
void intel_plane_disable(struct drm_plane *plane)
{
if (!plane->crtc || !plane->fb)
return;
intel_disable_plane(plane);
}
static const struct drm_plane_funcs intel_plane_funcs = {
.update_plane = intel_update_plane,
.disable_plane = intel_disable_plane,
.destroy = intel_destroy_plane,
.set_property = intel_plane_set_property,
};
static uint32_t ilk_plane_formats[] = {
DRM_FORMAT_XRGB8888,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
static uint32_t snb_plane_formats[] = {
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
static uint32_t vlv_plane_formats[] = {
DRM_FORMAT_RGB565,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_XBGR2101010,
DRM_FORMAT_ABGR2101010,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
static uint32_t skl_plane_formats[] = {
DRM_FORMAT_RGB565,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_UYVY,
DRM_FORMAT_VYUY,
};
int
intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
{
struct intel_plane *intel_plane;
unsigned long possible_crtcs;
const uint32_t *plane_formats;
int num_plane_formats;
int ret;
if (INTEL_INFO(dev)->gen < 5)
return -ENODEV;
intel_plane = kzalloc(sizeof(*intel_plane), GFP_KERNEL);
if (!intel_plane)
return -ENOMEM;
switch (INTEL_INFO(dev)->gen) {
case 5:
case 6:
intel_plane->can_scale = true;
intel_plane->max_downscale = 16;
intel_plane->update_plane = ilk_update_plane;
intel_plane->disable_plane = ilk_disable_plane;
intel_plane->update_colorkey = ilk_update_colorkey;
intel_plane->get_colorkey = ilk_get_colorkey;
if (IS_GEN6(dev)) {
plane_formats = snb_plane_formats;
num_plane_formats = ARRAY_SIZE(snb_plane_formats);
} else {
plane_formats = ilk_plane_formats;
num_plane_formats = ARRAY_SIZE(ilk_plane_formats);
}
break;
case 7:
case 8:
if (IS_IVYBRIDGE(dev)) {
intel_plane->can_scale = true;
intel_plane->max_downscale = 2;
} else {
intel_plane->can_scale = false;
intel_plane->max_downscale = 1;
}
if (IS_VALLEYVIEW(dev)) {
intel_plane->update_plane = vlv_update_plane;
intel_plane->disable_plane = vlv_disable_plane;
intel_plane->update_colorkey = vlv_update_colorkey;
intel_plane->get_colorkey = vlv_get_colorkey;
plane_formats = vlv_plane_formats;
num_plane_formats = ARRAY_SIZE(vlv_plane_formats);
} else {
intel_plane->update_plane = ivb_update_plane;
intel_plane->disable_plane = ivb_disable_plane;
intel_plane->update_colorkey = ivb_update_colorkey;
intel_plane->get_colorkey = ivb_get_colorkey;
plane_formats = snb_plane_formats;
num_plane_formats = ARRAY_SIZE(snb_plane_formats);
}
break;
case 9:
/*
* FIXME: Skylake planes can be scaled (with some restrictions),
* but this is for another time.
*/
intel_plane->can_scale = false;
intel_plane->max_downscale = 1;
intel_plane->update_plane = skl_update_plane;
intel_plane->disable_plane = skl_disable_plane;
intel_plane->update_colorkey = skl_update_colorkey;
intel_plane->get_colorkey = skl_get_colorkey;
plane_formats = skl_plane_formats;
num_plane_formats = ARRAY_SIZE(skl_plane_formats);
break;
default:
kfree(intel_plane);
return -ENODEV;
}
intel_plane->pipe = pipe;
intel_plane->plane = plane;
intel_plane->rotation = BIT(DRM_ROTATE_0);
possible_crtcs = (1 << pipe);
ret = drm_universal_plane_init(dev, &intel_plane->base, possible_crtcs,
&intel_plane_funcs,
plane_formats, num_plane_formats,
DRM_PLANE_TYPE_OVERLAY);
if (ret) {
kfree(intel_plane);
goto out;
}
if (!dev->mode_config.rotation_property)
dev->mode_config.rotation_property =
drm_mode_create_rotation_property(dev,
BIT(DRM_ROTATE_0) |
BIT(DRM_ROTATE_180));
if (dev->mode_config.rotation_property)
drm_object_attach_property(&intel_plane->base.base,
dev->mode_config.rotation_property,
intel_plane->rotation);
out:
return ret;
}