blob: 9098d880c476cf842598d32805ed25ac37fc9ae1 [file] [log] [blame]
/*
* Xen PCI - handle PCI (INTx) and MSI infrastructure calls for PV, HVM and
* initial domain support. We also handle the DSDT _PRT callbacks for GSI's
* used in HVM and initial domain mode (PV does not parse ACPI, so it has no
* concept of GSIs). Under PV we hook under the pnbbios API for IRQs and
* 0xcf8 PCI configuration read/write.
*
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
* Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* Stefano Stabellini <stefano.stabellini@eu.citrix.com>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/io.h>
#include <asm/io_apic.h>
#include <asm/pci_x86.h>
#include <asm/xen/hypervisor.h>
#include <xen/features.h>
#include <xen/events.h>
#include <asm/xen/pci.h>
#include <asm/xen/cpuid.h>
#include <asm/apic.h>
#include <asm/i8259.h>
static int xen_pcifront_enable_irq(struct pci_dev *dev)
{
int rc;
int share = 1;
int pirq;
u8 gsi;
rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi);
if (rc < 0) {
dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n",
rc);
return rc;
}
/* In PV DomU the Xen PCI backend puts the PIRQ in the interrupt line.*/
pirq = gsi;
if (gsi < nr_legacy_irqs())
share = 0;
rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront");
if (rc < 0) {
dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n",
gsi, pirq, rc);
return rc;
}
dev->irq = rc;
dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq);
return 0;
}
#ifdef CONFIG_ACPI
static int xen_register_pirq(u32 gsi, int gsi_override, int triggering,
bool set_pirq)
{
int rc, pirq = -1, irq = -1;
struct physdev_map_pirq map_irq;
int shareable = 0;
char *name;
irq = xen_irq_from_gsi(gsi);
if (irq > 0)
return irq;
if (set_pirq)
pirq = gsi;
map_irq.domid = DOMID_SELF;
map_irq.type = MAP_PIRQ_TYPE_GSI;
map_irq.index = gsi;
map_irq.pirq = pirq;
rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
if (rc) {
printk(KERN_WARNING "xen map irq failed %d\n", rc);
return -1;
}
if (triggering == ACPI_EDGE_SENSITIVE) {
shareable = 0;
name = "ioapic-edge";
} else {
shareable = 1;
name = "ioapic-level";
}
if (gsi_override >= 0)
gsi = gsi_override;
irq = xen_bind_pirq_gsi_to_irq(gsi, map_irq.pirq, shareable, name);
if (irq < 0)
goto out;
printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi);
out:
return irq;
}
static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
int trigger, int polarity)
{
if (!xen_hvm_domain())
return -1;
return xen_register_pirq(gsi, -1 /* no GSI override */, trigger,
false /* no mapping of GSI to PIRQ */);
}
#ifdef CONFIG_XEN_DOM0
static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity)
{
int rc, irq;
struct physdev_setup_gsi setup_gsi;
if (!xen_pv_domain())
return -1;
printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
gsi, triggering, polarity);
irq = xen_register_pirq(gsi, gsi_override, triggering, true);
setup_gsi.gsi = gsi;
setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1);
setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
if (rc == -EEXIST)
printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
else if (rc) {
printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
gsi, rc);
}
return irq;
}
static int acpi_register_gsi_xen(struct device *dev, u32 gsi,
int trigger, int polarity)
{
return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity);
}
#endif
#endif
#if defined(CONFIG_PCI_MSI)
#include <linux/msi.h>
#include <asm/msidef.h>
struct xen_pci_frontend_ops *xen_pci_frontend;
EXPORT_SYMBOL_GPL(xen_pci_frontend);
static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int irq, ret, i;
struct msi_desc *msidesc;
int *v;
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL);
if (!v)
return -ENOMEM;
if (type == PCI_CAP_ID_MSIX)
ret = xen_pci_frontend_enable_msix(dev, v, nvec);
else
ret = xen_pci_frontend_enable_msi(dev, v);
if (ret)
goto error;
i = 0;
list_for_each_entry(msidesc, &dev->msi_list, list) {
irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i],
(type == PCI_CAP_ID_MSI) ? nvec : 1,
(type == PCI_CAP_ID_MSIX) ?
"pcifront-msi-x" :
"pcifront-msi",
DOMID_SELF);
if (irq < 0) {
ret = irq;
goto free;
}
i++;
}
kfree(v);
return 0;
error:
dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n");
free:
kfree(v);
return ret;
}
#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
struct msi_msg *msg)
{
/* We set vector == 0 to tell the hypervisor we don't care about it,
* but we want a pirq setup instead.
* We use the dest_id field to pass the pirq that we want. */
msg->address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(pirq);
msg->address_lo =
MSI_ADDR_BASE_LO |
MSI_ADDR_DEST_MODE_PHYSICAL |
MSI_ADDR_REDIRECTION_CPU |
MSI_ADDR_DEST_ID(pirq);
msg->data = XEN_PIRQ_MSI_DATA;
}
static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int irq, pirq;
struct msi_desc *msidesc;
struct msi_msg msg;
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
list_for_each_entry(msidesc, &dev->msi_list, list) {
__pci_read_msi_msg(msidesc, &msg);
pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
if (msg.data != XEN_PIRQ_MSI_DATA ||
xen_irq_from_pirq(pirq) < 0) {
pirq = xen_allocate_pirq_msi(dev, msidesc);
if (pirq < 0) {
irq = -ENODEV;
goto error;
}
xen_msi_compose_msg(dev, pirq, &msg);
__pci_write_msi_msg(msidesc, &msg);
dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq);
} else {
dev_dbg(&dev->dev,
"xen: msi already bound to pirq=%d\n", pirq);
}
irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq,
(type == PCI_CAP_ID_MSI) ? nvec : 1,
(type == PCI_CAP_ID_MSIX) ?
"msi-x" : "msi",
DOMID_SELF);
if (irq < 0)
goto error;
dev_dbg(&dev->dev,
"xen: msi --> pirq=%d --> irq=%d\n", pirq, irq);
}
return 0;
error:
dev_err(&dev->dev,
"Xen PCI frontend has not registered MSI/MSI-X support!\n");
return irq;
}
#ifdef CONFIG_XEN_DOM0
static bool __read_mostly pci_seg_supported = true;
static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
{
int ret = 0;
struct msi_desc *msidesc;
list_for_each_entry(msidesc, &dev->msi_list, list) {
struct physdev_map_pirq map_irq;
domid_t domid;
domid = ret = xen_find_device_domain_owner(dev);
/* N.B. Casting int's -ENODEV to uint16_t results in 0xFFED,
* hence check ret value for < 0. */
if (ret < 0)
domid = DOMID_SELF;
memset(&map_irq, 0, sizeof(map_irq));
map_irq.domid = domid;
map_irq.type = MAP_PIRQ_TYPE_MSI_SEG;
map_irq.index = -1;
map_irq.pirq = -1;
map_irq.bus = dev->bus->number |
(pci_domain_nr(dev->bus) << 16);
map_irq.devfn = dev->devfn;
if (type == PCI_CAP_ID_MSI && nvec > 1) {
map_irq.type = MAP_PIRQ_TYPE_MULTI_MSI;
map_irq.entry_nr = nvec;
} else if (type == PCI_CAP_ID_MSIX) {
int pos;
u32 table_offset, bir;
pos = dev->msix_cap;
pci_read_config_dword(dev, pos + PCI_MSIX_TABLE,
&table_offset);
bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR);
map_irq.table_base = pci_resource_start(dev, bir);
map_irq.entry_nr = msidesc->msi_attrib.entry_nr;
}
ret = -EINVAL;
if (pci_seg_supported)
ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
&map_irq);
if (type == PCI_CAP_ID_MSI && nvec > 1 && ret) {
/*
* If MAP_PIRQ_TYPE_MULTI_MSI is not available
* there's nothing else we can do in this case.
* Just set ret > 0 so driver can retry with
* single MSI.
*/
ret = 1;
goto out;
}
if (ret == -EINVAL && !pci_domain_nr(dev->bus)) {
map_irq.type = MAP_PIRQ_TYPE_MSI;
map_irq.index = -1;
map_irq.pirq = -1;
map_irq.bus = dev->bus->number;
ret = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq,
&map_irq);
if (ret != -EINVAL)
pci_seg_supported = false;
}
if (ret) {
dev_warn(&dev->dev, "xen map irq failed %d for %d domain\n",
ret, domid);
goto out;
}
ret = xen_bind_pirq_msi_to_irq(dev, msidesc, map_irq.pirq,
(type == PCI_CAP_ID_MSI) ? nvec : 1,
(type == PCI_CAP_ID_MSIX) ? "msi-x" : "msi",
domid);
if (ret < 0)
goto out;
}
ret = 0;
out:
return ret;
}
static void xen_initdom_restore_msi_irqs(struct pci_dev *dev)
{
int ret = 0;
if (pci_seg_supported) {
struct physdev_pci_device restore_ext;
restore_ext.seg = pci_domain_nr(dev->bus);
restore_ext.bus = dev->bus->number;
restore_ext.devfn = dev->devfn;
ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi_ext,
&restore_ext);
if (ret == -ENOSYS)
pci_seg_supported = false;
WARN(ret && ret != -ENOSYS, "restore_msi_ext -> %d\n", ret);
}
if (!pci_seg_supported) {
struct physdev_restore_msi restore;
restore.bus = dev->bus->number;
restore.devfn = dev->devfn;
ret = HYPERVISOR_physdev_op(PHYSDEVOP_restore_msi, &restore);
WARN(ret && ret != -ENOSYS, "restore_msi -> %d\n", ret);
}
}
#endif
static void xen_teardown_msi_irqs(struct pci_dev *dev)
{
struct msi_desc *msidesc;
msidesc = list_entry(dev->msi_list.next, struct msi_desc, list);
if (msidesc->msi_attrib.is_msix)
xen_pci_frontend_disable_msix(dev);
else
xen_pci_frontend_disable_msi(dev);
/* Free the IRQ's and the msidesc using the generic code. */
default_teardown_msi_irqs(dev);
}
static void xen_teardown_msi_irq(unsigned int irq)
{
xen_destroy_irq(irq);
}
#endif
int __init pci_xen_init(void)
{
if (!xen_pv_domain() || xen_initial_domain())
return -ENODEV;
printk(KERN_INFO "PCI: setting up Xen PCI frontend stub\n");
pcibios_set_cache_line_size();
pcibios_enable_irq = xen_pcifront_enable_irq;
pcibios_disable_irq = NULL;
#ifdef CONFIG_ACPI
/* Keep ACPI out of the picture */
acpi_noirq = 1;
#endif
#ifdef CONFIG_PCI_MSI
x86_msi.setup_msi_irqs = xen_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
x86_msi.teardown_msi_irqs = xen_teardown_msi_irqs;
pci_msi_ignore_mask = 1;
#endif
return 0;
}
#ifdef CONFIG_PCI_MSI
void __init xen_msi_init(void)
{
if (!disable_apic) {
/*
* If hardware supports (x2)APIC virtualization (as indicated
* by hypervisor's leaf 4) then we don't need to use pirqs/
* event channels for MSI handling and instead use regular
* APIC processing
*/
uint32_t eax = cpuid_eax(xen_cpuid_base() + 4);
if (((eax & XEN_HVM_CPUID_X2APIC_VIRT) && x2apic_mode) ||
((eax & XEN_HVM_CPUID_APIC_ACCESS_VIRT) && cpu_has_apic))
return;
}
x86_msi.setup_msi_irqs = xen_hvm_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
}
#endif
int __init pci_xen_hvm_init(void)
{
if (!xen_have_vector_callback || !xen_feature(XENFEAT_hvm_pirqs))
return 0;
#ifdef CONFIG_ACPI
/*
* We don't want to change the actual ACPI delivery model,
* just how GSIs get registered.
*/
__acpi_register_gsi = acpi_register_gsi_xen_hvm;
__acpi_unregister_gsi = NULL;
#endif
#ifdef CONFIG_PCI_MSI
/*
* We need to wait until after x2apic is initialized
* before we can set MSI IRQ ops.
*/
x86_platform.apic_post_init = xen_msi_init;
#endif
return 0;
}
#ifdef CONFIG_XEN_DOM0
int __init pci_xen_initial_domain(void)
{
int irq;
#ifdef CONFIG_PCI_MSI
x86_msi.setup_msi_irqs = xen_initdom_setup_msi_irqs;
x86_msi.teardown_msi_irq = xen_teardown_msi_irq;
x86_msi.restore_msi_irqs = xen_initdom_restore_msi_irqs;
pci_msi_ignore_mask = 1;
#endif
__acpi_register_gsi = acpi_register_gsi_xen;
__acpi_unregister_gsi = NULL;
/* Pre-allocate legacy irqs */
for (irq = 0; irq < nr_legacy_irqs(); irq++) {
int trigger, polarity;
if (acpi_get_override_irq(irq, &trigger, &polarity) == -1)
continue;
xen_register_pirq(irq, -1 /* no GSI override */,
trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE,
true /* Map GSI to PIRQ */);
}
if (0 == nr_ioapics) {
for (irq = 0; irq < nr_legacy_irqs(); irq++)
xen_bind_pirq_gsi_to_irq(irq, irq, 0, "xt-pic");
}
return 0;
}
struct xen_device_domain_owner {
domid_t domain;
struct pci_dev *dev;
struct list_head list;
};
static DEFINE_SPINLOCK(dev_domain_list_spinlock);
static struct list_head dev_domain_list = LIST_HEAD_INIT(dev_domain_list);
static struct xen_device_domain_owner *find_device(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
list_for_each_entry(owner, &dev_domain_list, list) {
if (owner->dev == dev)
return owner;
}
return NULL;
}
int xen_find_device_domain_owner(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
int domain = -ENODEV;
spin_lock(&dev_domain_list_spinlock);
owner = find_device(dev);
if (owner)
domain = owner->domain;
spin_unlock(&dev_domain_list_spinlock);
return domain;
}
EXPORT_SYMBOL_GPL(xen_find_device_domain_owner);
int xen_register_device_domain_owner(struct pci_dev *dev, uint16_t domain)
{
struct xen_device_domain_owner *owner;
owner = kzalloc(sizeof(struct xen_device_domain_owner), GFP_KERNEL);
if (!owner)
return -ENODEV;
spin_lock(&dev_domain_list_spinlock);
if (find_device(dev)) {
spin_unlock(&dev_domain_list_spinlock);
kfree(owner);
return -EEXIST;
}
owner->domain = domain;
owner->dev = dev;
list_add_tail(&owner->list, &dev_domain_list);
spin_unlock(&dev_domain_list_spinlock);
return 0;
}
EXPORT_SYMBOL_GPL(xen_register_device_domain_owner);
int xen_unregister_device_domain_owner(struct pci_dev *dev)
{
struct xen_device_domain_owner *owner;
spin_lock(&dev_domain_list_spinlock);
owner = find_device(dev);
if (!owner) {
spin_unlock(&dev_domain_list_spinlock);
return -ENODEV;
}
list_del(&owner->list);
spin_unlock(&dev_domain_list_spinlock);
kfree(owner);
return 0;
}
EXPORT_SYMBOL_GPL(xen_unregister_device_domain_owner);
#endif