arch/powerpc/boot/dts/p1023rdb.dts - kernel/bruno - Git at Google

 /*
  * P1023 RDB Device Tree Source
  *
  *    Copyright 2013 Freescale Semiconductor Inc.
  *
  * Author: Chunhe Lan <Chunhe.Lan@freescale.com>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 /include/ "fsl/p1023si-pre.dtsi"

 / {
 	model = "fsl,P1023";
 	compatible = "fsl,P1023RDB";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;

 	memory {
 		device_type = "memory";
 	};

 	soc: soc@ff600000 {
 		ranges = <0x0 0x0 0xff600000 0x200000>;

 		i2c@3000 {
 			eeprom@53 {
 				compatible = "at24,24c04";
 				reg = <0x53>;
 			};

 			rtc@6f {
 				compatible = "microchip,mcp7941x";
 				reg = <0x6f>;
 			};
 		};

 		usb@22000 {
 			dr_mode = "host";
 			phy_type = "ulpi";
 		};
 	};

 	lbc: localbus@ff605000 {
 		reg = <0 0xff605000 0 0x1000>;

 		/* NOR, NAND Flashes */
 		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
 			  0x1 0x0 0x0 0xffa00000 0x08000000>;

 		nor@0,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "cfi-flash";
 			reg = <0x0 0x0 0x04000000>;
 			bank-width = <2>;
 			device-width = <1>;

 			partition@0 {
 				/* 48MB for Root File System */
 				reg = <0x00000000 0x03000000>;
 				label = "NOR Root File System";
 			};

 			partition@3000000 {
 				/* 1MB for DTB Image */
 				reg = <0x03000000 0x00100000>;
 				label = "NOR DTB Image";
 			};

 			partition@3100000 {
 				/* 14MB for Linux Kernel Image */
 				reg = <0x03100000 0x00e00000>;
 				label = "NOR Linux Kernel Image";
 			};

 			partition@3f00000 {
 				/* This location must not be altered  */
 				/* 512KB for u-boot Bootloader Image */
 				/* 512KB for u-boot Environment Variables */
 				reg = <0x03f00000 0x00100000>;
 				label = "NOR U-Boot Image";
 				read-only;
 			};
 		};

 		nand@1,0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,elbc-fcm-nand";
 			reg = <0x1 0x0 0x40000>;

 			partition@0 {
 				/* This location must not be altered  */
 				/* 1MB for u-boot Bootloader Image */
 				reg = <0x0 0x00100000>;
 				label = "NAND U-Boot Image";
 				read-only;
 			};

 			partition@100000 {
 				/* 1MB for DTB Image */
 				reg = <0x00100000 0x00100000>;
 				label = "NAND DTB Image";
 			};

 			partition@200000 {
 				/* 14MB for Linux Kernel Image */
 				reg = <0x00200000 0x00e00000>;
 				label = "NAND Linux Kernel Image";
 			};

 			partition@1000000 {
 				/* 96MB for Root File System Image */
 				reg = <0x01000000 0x06000000>;
 				label = "NAND Root File System";
 			};

 			partition@7000000 {
 				/* 16MB for User Writable Area */
 				reg = <0x07000000 0x01000000>;
 				label = "NAND Writable User area";
 			};
 		};
 	};

 	pci0: pcie@ff60a000 {
 		reg = <0 0xff60a000 0 0x1000>;
 		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
 		pcie@0 {
 			/* IRQ[0:3] are pulled up on board, set to active-low */
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 0 1 0 0
 				0000 0 0 2 &mpic 1 1 0 0
 				0000 0 0 3 &mpic 2 1 0 0
 				0000 0 0 4 &mpic 3 1 0 0
 				>;
 			ranges = <0x2000000 0x0 0xc0000000
 				  0x2000000 0x0 0xc0000000
 				  0x0 0x20000000

 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 		};
 	};

 	board_pci1: pci1: pcie@ff609000 {
 		reg = <0 0xff609000 0 0x1000>;
 		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
 		pcie@0 {
 			/*
 			 * IRQ[4:6] only for PCIe, set to active-high,
 			 * IRQ[7] is pulled up on board, set to active-low
 			 */
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 4 2 0 0
 				0000 0 0 2 &mpic 5 2 0 0
 				0000 0 0 3 &mpic 6 2 0 0
 				0000 0 0 4 &mpic 7 1 0 0
 				>;
 			ranges = <0x2000000 0x0 0xa0000000
 				  0x2000000 0x0 0xa0000000
 				  0x0 0x20000000

 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 		};
 	};

 	pci2: pcie@ff60b000 {
 		reg = <0 0xff60b000 0 0x1000>;
 		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
 			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
 		pcie@0 {
 			/*
 			 * IRQ[8:10] are pulled up on board, set to active-low
 			 * IRQ[11] only for PCIe, set to active-high,
 			 */
 			interrupt-map-mask = <0xf800 0 0 7>;
 			interrupt-map = <
 				/* IDSEL 0x0 */
 				0000 0 0 1 &mpic 8 1 0 0
 				0000 0 0 2 &mpic 9 1 0 0
 				0000 0 0 3 &mpic 10 1 0 0
 				0000 0 0 4 &mpic 11 2 0 0
 				>;
 			ranges = <0x2000000 0x0 0x80000000
 				  0x2000000 0x0 0x80000000
 				  0x0 0x20000000

 				  0x1000000 0x0 0x0
 				  0x1000000 0x0 0x0
 				  0x0 0x100000>;
 		};
 	};

 };

 /include/ "fsl/p1023si-post.dtsi"
	/*
	* P1023 RDB Device Tree Source
	*
	* Copyright 2013 Freescale Semiconductor Inc.
	*
	* Author: Chunhe Lan <Chunhe.Lan@freescale.com>
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	/include/ "fsl/p1023si-pre.dtsi"

	/ {
	model = "fsl,P1023";
	compatible = "fsl,P1023RDB";
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&mpic>;

	memory {
	device_type = "memory";
	};

	soc: soc@ff600000 {
	ranges = <0x0 0x0 0xff600000 0x200000>;

	i2c@3000 {
	eeprom@53 {
	compatible = "at24,24c04";
	reg = <0x53>;
	};

	rtc@6f {
	compatible = "microchip,mcp7941x";
	reg = <0x6f>;
	};
	};

	usb@22000 {
	dr_mode = "host";
	phy_type = "ulpi";
	};
	};

	lbc: localbus@ff605000 {
	reg = <0 0xff605000 0 0x1000>;

	/* NOR, NAND Flashes */
	ranges = <0x0 0x0 0x0 0xec000000 0x04000000
	0x1 0x0 0x0 0xffa00000 0x08000000>;

	nor@0,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "cfi-flash";
	reg = <0x0 0x0 0x04000000>;
	bank-width = <2>;
	device-width = <1>;

	partition@0 {
	/* 48MB for Root File System */
	reg = <0x00000000 0x03000000>;
	label = "NOR Root File System";
	};

	partition@3000000 {
	/* 1MB for DTB Image */
	reg = <0x03000000 0x00100000>;
	label = "NOR DTB Image";
	};

	partition@3100000 {
	/* 14MB for Linux Kernel Image */
	reg = <0x03100000 0x00e00000>;
	label = "NOR Linux Kernel Image";
	};

	partition@3f00000 {
	/* This location must not be altered */
	/* 512KB for u-boot Bootloader Image */
	/* 512KB for u-boot Environment Variables */
	reg = <0x03f00000 0x00100000>;
	label = "NOR U-Boot Image";
	read-only;
	};
	};

	nand@1,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,elbc-fcm-nand";
	reg = <0x1 0x0 0x40000>;

	partition@0 {
	/* This location must not be altered */
	/* 1MB for u-boot Bootloader Image */
	reg = <0x0 0x00100000>;
	label = "NAND U-Boot Image";
	read-only;
	};

	partition@100000 {
	/* 1MB for DTB Image */
	reg = <0x00100000 0x00100000>;
	label = "NAND DTB Image";
	};

	partition@200000 {
	/* 14MB for Linux Kernel Image */
	reg = <0x00200000 0x00e00000>;
	label = "NAND Linux Kernel Image";
	};

	partition@1000000 {
	/* 96MB for Root File System Image */
	reg = <0x01000000 0x06000000>;
	label = "NAND Root File System";
	};

	partition@7000000 {
	/* 16MB for User Writable Area */
	reg = <0x07000000 0x01000000>;
	label = "NAND Writable User area";
	};
	};
	};

	pci0: pcie@ff60a000 {
	reg = <0 0xff60a000 0 0x1000>;
	ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
	0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
	pcie@0 {
	/* IRQ[0:3] are pulled up on board, set to active-low */
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 0 1 0 0
	0000 0 0 2 &mpic 1 1 0 0
	0000 0 0 3 &mpic 2 1 0 0
	0000 0 0 4 &mpic 3 1 0 0
	>;
	ranges = <0x2000000 0x0 0xc0000000
	0x2000000 0x0 0xc0000000
	0x0 0x20000000

	0x1000000 0x0 0x0
	0x1000000 0x0 0x0
	0x0 0x100000>;
	};
	};

	board_pci1: pci1: pcie@ff609000 {
	reg = <0 0xff609000 0 0x1000>;
	ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
	0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
	pcie@0 {
	/*
	* IRQ[4:6] only for PCIe, set to active-high,
	* IRQ[7] is pulled up on board, set to active-low
	*/
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 4 2 0 0
	0000 0 0 2 &mpic 5 2 0 0
	0000 0 0 3 &mpic 6 2 0 0
	0000 0 0 4 &mpic 7 1 0 0
	>;
	ranges = <0x2000000 0x0 0xa0000000
	0x2000000 0x0 0xa0000000
	0x0 0x20000000

	0x1000000 0x0 0x0
	0x1000000 0x0 0x0
	0x0 0x100000>;
	};
	};

	pci2: pcie@ff60b000 {
	reg = <0 0xff60b000 0 0x1000>;
	ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
	0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
	pcie@0 {
	/*
	* IRQ[8:10] are pulled up on board, set to active-low
	* IRQ[11] only for PCIe, set to active-high,
	*/
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 8 1 0 0
	0000 0 0 2 &mpic 9 1 0 0
	0000 0 0 3 &mpic 10 1 0 0
	0000 0 0 4 &mpic 11 2 0 0
	>;
	ranges = <0x2000000 0x0 0x80000000
	0x2000000 0x0 0x80000000
	0x0 0x20000000

	0x1000000 0x0 0x0
	0x1000000 0x0 0x0
	0x0 0x100000>;
	};
	};

	};

	/include/ "fsl/p1023si-post.dtsi"