| IPMI device |
| |
| Required properties: |
| - compatible: should be one of ipmi-kcs, ipmi-smic, or ipmi-bt |
| - device_type: should be ipmi |
| - reg: Address and length of the register set for the device |
| |
| Optional properties: |
| - interrupts: The interrupt for the device. Without this the interface |
| is polled. |
| - reg-size - The size of the register. Defaults to 1 |
| - reg-spacing - The number of bytes between register starts. Defaults to 1 |
| - reg-shift - The amount to shift the registers to the right to get the data |
| into bit zero. |
| |
| Example: |
| |
| smic@fff3a000 { |
| compatible = "ipmi-smic"; |
| device_type = "ipmi"; |
| reg = <0xfff3a000 0x1000>; |
| interrupts = <0 24 4>; |
| reg-size = <4>; |
| reg-spacing = <4>; |
| }; |
