blob: a5441d5482a63a0a9203f3333b96c87ec1912b11 [file] [log] [blame]
/include/ "skeleton.dtsi"
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
compatible = "marvell,dove";
model = "Marvell Armada 88AP510 SoC";
interrupt-parent = <&intc>;
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "marvell,pj4a", "marvell,sheeva-v7";
device_type = "cpu";
next-level-cache = <&l2>;
reg = <0>;
};
};
l2: l2-cache {
compatible = "marvell,tauros2-cache";
marvell,tauros2-cache-features = <0>;
};
mbus {
compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
pcie-io-aperture = <0xf2000000 0x00200000>; /* 2M I/O space */
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000 /* MBUS regs 1M */
MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000 /* AXI regs 16M */
MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000 /* BootROM 128M */
MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000 /* CESA SRAM 1M */
MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU SRAM 1M */
pcie: pcie-controller {
compatible = "marvell,dove-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
msi-parent = <&intc>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 Mem */
0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 I/O */
0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 Mem */
0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
pcie-port@0 {
device_type = "pci";
status = "disabled";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
clocks = <&gate_clk 4>;
marvell,pcie-port = <0>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 16>;
};
pcie-port@1 {
device_type = "pci";
status = "disabled";
assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
clocks = <&gate_clk 5>;
marvell,pcie-port = <1>;
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 18>;
};
};
internal-regs {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000 /* MBUS regs 1M */
0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000 /* AXI regs 16M */
0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
spi0: spi-ctrl@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
interrupts = <6>;
reg = <0x10600 0x28>;
clocks = <&core_clk 0>;
pinctrl-0 = <&pmx_spi0>;
pinctrl-names = "default";
status = "disabled";
};
i2c0: i2c-ctrl@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <11>;
clock-frequency = <400000>;
timeout-ms = <1000>;
clocks = <&core_clk 0>;
status = "disabled";
};
uart0: serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <7>;
clocks = <&core_clk 0>;
status = "disabled";
};
uart1: serial@12100 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <8>;
clocks = <&core_clk 0>;
pinctrl-0 = <&pmx_uart1>;
pinctrl-names = "default";
status = "disabled";
};
uart2: serial@12200 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <9>;
clocks = <&core_clk 0>;
status = "disabled";
};
uart3: serial@12300 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <10>;
clocks = <&core_clk 0>;
status = "disabled";
};
spi1: spi-ctrl@14600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
interrupts = <5>;
reg = <0x14600 0x28>;
clocks = <&core_clk 0>;
status = "disabled";
};
mbusc: mbus-ctrl@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x80>, <0x800100 0x8>;
};
sysc: system-ctrl@20000 {
compatible = "marvell,orion-system-controller";
reg = <0x20000 0x110>;
};
bridge_intc: bridge-interrupt-ctrl@20110 {
compatible = "marvell,orion-bridge-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20110 0x8>;
interrupts = <0>;
marvell,#interrupts = <5>;
};
intc: main-interrupt-ctrl@20200 {
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20200 0x10>, <0x20210 0x10>;
};
timer: timer@20300 {
compatible = "marvell,orion-timer";
reg = <0x20300 0x20>;
interrupt-parent = <&bridge_intc>;
interrupts = <1>, <2>;
clocks = <&core_clk 0>;
};
watchdog@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>, <0x20108 0x4>;
interrupt-parent = <&bridge_intc>;
interrupts = <3>;
clocks = <&core_clk 0>;
};
crypto: crypto-engine@30000 {
compatible = "marvell,orion-crypto";
reg = <0x30000 0x10000>,
<0xffffe000 0x800>;
reg-names = "regs", "sram";
interrupts = <31>;
clocks = <&gate_clk 15>;
status = "okay";
};
ehci0: usb-host@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <24>;
clocks = <&gate_clk 0>;
status = "okay";
};
ehci1: usb-host@51000 {
compatible = "marvell,orion-ehci";
reg = <0x51000 0x1000>;
interrupts = <25>;
clocks = <&gate_clk 1>;
status = "okay";
};
xor0: dma-engine@60800 {
compatible = "marvell,orion-xor";
reg = <0x60800 0x100
0x60a00 0x100>;
clocks = <&gate_clk 23>;
status = "okay";
channel0 {
interrupts = <39>;
dmacap,memcpy;
dmacap,xor;
};
channel1 {
interrupts = <40>;
dmacap,memcpy;
dmacap,xor;
};
};
xor1: dma-engine@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
clocks = <&gate_clk 24>;
status = "okay";
channel0 {
interrupts = <42>;
dmacap,memcpy;
dmacap,xor;
};
channel1 {
interrupts = <43>;
dmacap,memcpy;
dmacap,xor;
};
};
sdio1: sdio-host@90000 {
compatible = "marvell,dove-sdhci";
reg = <0x90000 0x100>;
interrupts = <36>, <38>;
clocks = <&gate_clk 9>;
pinctrl-0 = <&pmx_sdio1>;
pinctrl-names = "default";
status = "disabled";
};
eth: ethernet-ctrl@72000 {
compatible = "marvell,orion-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72000 0x4000>;
clocks = <&gate_clk 2>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethernet-port@0 {
compatible = "marvell,orion-eth-port";
reg = <0>;
interrupts = <29>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
phy-handle = <&ethphy>;
};
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72004 0x84>;
interrupts = <30>;
clocks = <&gate_clk 2>;
status = "disabled";
ethphy: ethernet-phy {
/* set phy address in board file */
};
};
sdio0: sdio-host@92000 {
compatible = "marvell,dove-sdhci";
reg = <0x92000 0x100>;
interrupts = <35>, <37>;
clocks = <&gate_clk 8>;
pinctrl-0 = <&pmx_sdio0>;
pinctrl-names = "default";
status = "disabled";
};
sata0: sata-host@a0000 {
compatible = "marvell,orion-sata";
reg = <0xa0000 0x2400>;
interrupts = <62>;
clocks = <&gate_clk 3>;
phys = <&sata_phy0>;
phy-names = "port0";
nr-ports = <1>;
status = "disabled";
};
sata_phy0: sata-phy@a2000 {
compatible = "marvell,mvebu-sata-phy";
reg = <0xa2000 0x0334>;
clocks = <&gate_clk 3>;
clock-names = "sata";
#phy-cells = <0>;
status = "ok";
};
audio0: audio-controller@b0000 {
compatible = "marvell,dove-audio";
reg = <0xb0000 0x2210>;
interrupts = <19>, <20>;
clocks = <&gate_clk 12>;
clock-names = "internal";
status = "disabled";
};
audio1: audio-controller@b4000 {
compatible = "marvell,dove-audio";
reg = <0xb4000 0x2210>;
interrupts = <21>, <22>;
clocks = <&gate_clk 13>;
clock-names = "internal";
status = "disabled";
};
thermal: thermal-diode@d001c {
compatible = "marvell,dove-thermal";
reg = <0xd001c 0x0c>, <0xd005c 0x08>;
};
gate_clk: clock-gating-ctrl@d0038 {
compatible = "marvell,dove-gating-clock";
reg = <0xd0038 0x4>;
clocks = <&core_clk 0>;
#clock-cells = <1>;
};
pinctrl: pin-ctrl@d0200 {
compatible = "marvell,dove-pinctrl";
reg = <0xd0200 0x14>,
<0xd0440 0x04>;
clocks = <&gate_clk 22>;
pmx_gpio_0: pmx-gpio-0 {
marvell,pins = "mpp0";
marvell,function = "gpio";
};
pmx_gpio_1: pmx-gpio-1 {
marvell,pins = "mpp1";
marvell,function = "gpio";
};
pmx_gpio_2: pmx-gpio-2 {
marvell,pins = "mpp2";
marvell,function = "gpio";
};
pmx_gpio_3: pmx-gpio-3 {
marvell,pins = "mpp3";
marvell,function = "gpio";
};
pmx_gpio_4: pmx-gpio-4 {
marvell,pins = "mpp4";
marvell,function = "gpio";
};
pmx_gpio_5: pmx-gpio-5 {
marvell,pins = "mpp5";
marvell,function = "gpio";
};
pmx_gpio_6: pmx-gpio-6 {
marvell,pins = "mpp6";
marvell,function = "gpio";
};
pmx_gpio_7: pmx-gpio-7 {
marvell,pins = "mpp7";
marvell,function = "gpio";
};
pmx_gpio_8: pmx-gpio-8 {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
pmx_gpio_9: pmx-gpio-9 {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
pmx_gpio_10: pmx-gpio-10 {
marvell,pins = "mpp10";
marvell,function = "gpio";
};
pmx_gpio_11: pmx-gpio-11 {
marvell,pins = "mpp11";
marvell,function = "gpio";
};
pmx_gpio_12: pmx-gpio-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_gpio_13: pmx-gpio-13 {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_audio1_extclk: pmx-audio1-extclk {
marvell,pins = "mpp13";
marvell,function = "audio1";
};
pmx_gpio_14: pmx-gpio-14 {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
pmx_gpio_15: pmx-gpio-15 {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_gpio_16: pmx-gpio-16 {
marvell,pins = "mpp16";
marvell,function = "gpio";
};
pmx_gpio_17: pmx-gpio-17 {
marvell,pins = "mpp17";
marvell,function = "gpio";
};
pmx_gpio_18: pmx-gpio-18 {
marvell,pins = "mpp18";
marvell,function = "gpio";
};
pmx_gpio_19: pmx-gpio-19 {
marvell,pins = "mpp19";
marvell,function = "gpio";
};
pmx_gpio_20: pmx-gpio-20 {
marvell,pins = "mpp20";
marvell,function = "gpio";
};
pmx_gpio_21: pmx-gpio-21 {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_camera: pmx-camera {
marvell,pins = "mpp_camera";
marvell,function = "camera";
};
pmx_camera_gpio: pmx-camera-gpio {
marvell,pins = "mpp_camera";
marvell,function = "gpio";
};
pmx_sdio0: pmx-sdio0 {
marvell,pins = "mpp_sdio0";
marvell,function = "sdio0";
};
pmx_sdio0_gpio: pmx-sdio0-gpio {
marvell,pins = "mpp_sdio0";
marvell,function = "gpio";
};
pmx_sdio1: pmx-sdio1 {
marvell,pins = "mpp_sdio1";
marvell,function = "sdio1";
};
pmx_sdio1_gpio: pmx-sdio1-gpio {
marvell,pins = "mpp_sdio1";
marvell,function = "gpio";
};
pmx_audio1_gpio: pmx-audio1-gpio {
marvell,pins = "mpp_audio1";
marvell,function = "gpio";
};
pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
marvell,pins = "mpp_audio1";
marvell,function = "i2s1/spdifo";
};
pmx_spi0: pmx-spi0 {
marvell,pins = "mpp_spi0";
marvell,function = "spi0";
};
pmx_spi0_gpio: pmx-spi0-gpio {
marvell,pins = "mpp_spi0";
marvell,function = "gpio";
};
pmx_uart1: pmx-uart1 {
marvell,pins = "mpp_uart1";
marvell,function = "uart1";
};
pmx_uart1_gpio: pmx-uart1-gpio {
marvell,pins = "mpp_uart1";
marvell,function = "gpio";
};
pmx_nand: pmx-nand {
marvell,pins = "mpp_nand";
marvell,function = "nand";
};
pmx_nand_gpo: pmx-nand-gpo {
marvell,pins = "mpp_nand";
marvell,function = "gpo";
};
};
core_clk: core-clocks@d0214 {
compatible = "marvell,dove-core-clock";
reg = <0xd0214 0x4>;
#clock-cells = <1>;
};
gpio0: gpio-ctrl@d0400 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0xd0400 0x20>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <12>, <13>, <14>, <60>;
};
gpio1: gpio-ctrl@d0420 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0xd0420 0x20>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <61>;
};
rtc: real-time-clock@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
};
gconf: global-config@e802c {
compatible = "marvell,dove-global-config",
"syscon";
reg = <0xe802c 0x14>;
};
gpio2: gpio-ctrl@e8400 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0xe8400 0x0c>;
ngpios = <8>;
};
lcd1: lcd-controller@810000 {
compatible = "marvell,dove-lcd";
reg = <0x810000 0x1000>;
interrupts = <46>;
status = "disabled";
};
lcd0: lcd-controller@820000 {
compatible = "marvell,dove-lcd";
reg = <0x820000 0x1000>;
interrupts = <47>;
status = "disabled";
};
};
};
};