| # |
| # Makefile for USB Host Controller Drivers |
| # |
| |
| # tell define_trace.h where to find the xhci trace header |
| CFLAGS_xhci-trace.o := -I$(src) |
| |
| isp1760-y := isp1760-hcd.o isp1760-if.o |
| |
| fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o |
| fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o |
| |
| fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o |
| |
| xhci-hcd-y := xhci.o xhci-mem.o |
| xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o |
| xhci-hcd-y += xhci-trace.o |
| |
| xhci-plat-hcd-y := xhci-plat.o |
| ifneq ($(CONFIG_USB_XHCI_MVEBU), ) |
| xhci-plat-hcd-y += xhci-mvebu.o |
| endif |
| ifneq ($(CONFIG_USB_XHCI_RCAR), ) |
| xhci-plat-hcd-y += xhci-rcar.o |
| endif |
| |
| obj-$(CONFIG_USB_WHCI_HCD) += whci/ |
| |
| obj-$(CONFIG_PCI) += pci-quirks.o |
| obj-$(CONFIG_BRCM_USB) += usb-brcm.o ehci-brcm.o ohci-brcm.o |
| |
| obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o |
| obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o |
| |
| obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o |
| obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o |
| obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o |
| obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o |
| obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o |
| obj-$(CONFIG_USB_EHCI_HCD_ORION) += ehci-orion.o |
| obj-$(CONFIG_USB_EHCI_HCD_SPEAR) += ehci-spear.o |
| obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o |
| obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o |
| obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o |
| obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o |
| obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o |
| obj-$(CONFIG_USB_W90X900_EHCI) += ehci-w90x900.o |
| |
| obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o |
| obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o |
| obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o |
| |
| obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o |
| obj-$(CONFIG_USB_OHCI_HCD_PCI) += ohci-pci.o |
| obj-$(CONFIG_USB_OHCI_HCD_PLATFORM) += ohci-platform.o |
| obj-$(CONFIG_USB_OHCI_EXYNOS) += ohci-exynos.o |
| obj-$(CONFIG_USB_OHCI_HCD_OMAP1) += ohci-omap.o |
| obj-$(CONFIG_USB_OHCI_HCD_OMAP3) += ohci-omap3.o |
| obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o |
| obj-$(CONFIG_USB_OHCI_HCD_STI) += ohci-st.o |
| obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o |
| obj-$(CONFIG_USB_OHCI_HCD_S3C2410) += ohci-s3c2410.o |
| obj-$(CONFIG_USB_OHCI_HCD_LPC32XX) += ohci-nxp.o |
| obj-$(CONFIG_USB_OHCI_HCD_PXA27X) += ohci-pxa27x.o |
| |
| obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o |
| obj-$(CONFIG_USB_FHCI_HCD) += fhci.o |
| obj-$(CONFIG_USB_XHCI_HCD) += xhci-hcd.o |
| obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o |
| obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o |
| obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o |
| obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o |
| obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o |
| obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o |
| obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o |
| obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o |
| obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o |
| obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o |
| obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o |
| obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o |
| obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o |
