include/linux/power/charger-manager.h - kernel/bruno - Git at Google

 /*
  * Copyright (C) 2011 Samsung Electronics Co., Ltd.
  * MyungJoo.Ham <myungjoo.ham@samsung.com>
  *
  * Charger Manager.
  * This framework enables to control and multiple chargers and to
  * monitor charging even in the context of suspend-to-RAM with
  * an interface combining the chargers.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 **/

 #ifndef _CHARGER_MANAGER_H
 #define _CHARGER_MANAGER_H

 #include <linux/power_supply.h>
 #include <linux/extcon.h>
 #include <linux/alarmtimer.h>

 enum data_source {
 	CM_BATTERY_PRESENT,
 	CM_NO_BATTERY,
 	CM_FUEL_GAUGE,
 	CM_CHARGER_STAT,
 };

 enum polling_modes {
 	CM_POLL_DISABLE = 0,
 	CM_POLL_ALWAYS,
 	CM_POLL_EXTERNAL_POWER_ONLY,
 	CM_POLL_CHARGING_ONLY,
 };

 enum cm_event_types {
 	CM_EVENT_UNKNOWN = 0,
 	CM_EVENT_BATT_FULL,
 	CM_EVENT_BATT_IN,
 	CM_EVENT_BATT_OUT,
 	CM_EVENT_BATT_OVERHEAT,
 	CM_EVENT_BATT_COLD,
 	CM_EVENT_EXT_PWR_IN_OUT,
 	CM_EVENT_CHG_START_STOP,
 	CM_EVENT_OTHERS,
 };

 /**
  * struct charger_cable
  * @extcon_name: the name of extcon device.
  * @name: the name of charger cable(external connector).
  * @extcon_dev: the extcon device.
  * @wq: the workqueue to control charger according to the state of
  *	charger cable. If charger cable is attached, enable charger.
  *	But if charger cable is detached, disable charger.
  * @nb: the notifier block to receive changed state from EXTCON
  *	(External Connector) when charger cable is attached/detached.
  * @attached: the state of charger cable.
  *	true: the charger cable is attached
  *	false: the charger cable is detached
  * @charger: the instance of struct charger_regulator.
  * @cm: the Charger Manager representing the battery.
  */
 struct charger_cable {
 	const char *extcon_name;
 	const char *name;

 	/* The charger-manager use Extcon framework */
 	struct extcon_specific_cable_nb extcon_dev;
 	struct work_struct wq;
 	struct notifier_block nb;

 	/* The state of charger cable */
 	bool attached;

 	struct charger_regulator *charger;

 	/*
 	 * Set min/max current of regulator to protect over-current issue
 	 * according to a kind of charger cable when cable is attached.
 	 */
 	int min_uA;
 	int max_uA;

 	struct charger_manager *cm;
 };

 /**
  * struct charger_regulator
  * @regulator_name: the name of regulator for using charger.
  * @consumer: the regulator consumer for the charger.
  * @externally_control:
  *	Set if the charger-manager cannot control charger,
  *	the charger will be maintained with disabled state.
  * @cables:
  *	the array of charger cables to enable/disable charger
  *	and set current limit according to constraint data of
  *	struct charger_cable if only charger cable included
  *	in the array of charger cables is attached/detached.
  * @num_cables: the number of charger cables.
  * @attr_g: Attribute group for the charger(regulator)
  * @attr_name: "name" sysfs entry
  * @attr_state: "state" sysfs entry
  * @attr_externally_control: "externally_control" sysfs entry
  * @attrs: Arrays pointing to attr_name/state/externally_control for attr_g
  */
 struct charger_regulator {
 	/* The name of regulator for charging */
 	const char *regulator_name;
 	struct regulator *consumer;

 	/* charger never on when system is on */
 	int externally_control;

 	/*
 	 * Store constraint information related to current limit,
 	 * each cable have different condition for charging.
 	 */
 	struct charger_cable *cables;
 	int num_cables;

 	struct attribute_group attr_g;
 	struct device_attribute attr_name;
 	struct device_attribute attr_state;
 	struct device_attribute attr_externally_control;
 	struct attribute *attrs[4];

 	struct charger_manager *cm;
 };

 /**
  * struct charger_desc
  * @psy_name: the name of power-supply-class for charger manager
  * @polling_mode:
  *	Determine which polling mode will be used
  * @fullbatt_vchkdrop_ms:
  * @fullbatt_vchkdrop_uV:
  *	Check voltage drop after the battery is fully charged.
  *	If it has dropped more than fullbatt_vchkdrop_uV after
  *	fullbatt_vchkdrop_ms, CM will restart charging.
  * @fullbatt_uV: voltage in microvolt
  *	If VBATT >= fullbatt_uV, it is assumed to be full.
  * @fullbatt_soc: state of Charge in %
  *	If state of Charge >= fullbatt_soc, it is assumed to be full.
  * @fullbatt_full_capacity: full capacity measure
  *	If full capacity of battery >= fullbatt_full_capacity,
  *	it is assumed to be full.
  * @polling_interval_ms: interval in millisecond at which
  *	charger manager will monitor battery health
  * @battery_present:
  *	Specify where information for existence of battery can be obtained
  * @psy_charger_stat: the names of power-supply for chargers
  * @num_charger_regulator: the number of entries in charger_regulators
  * @charger_regulators: array of charger regulators
  * @psy_fuel_gauge: the name of power-supply for fuel gauge
  * @thermal_zone : the name of thermal zone for battery
  * @temp_min : Minimum battery temperature for charging.
  * @temp_max : Maximum battery temperature for charging.
  * @temp_diff : Temperature difference to restart charging.
  * @measure_battery_temp:
  *	true: measure battery temperature
  *	false: measure ambient temperature
  * @charging_max_duration_ms: Maximum possible duration for charging
  *	If whole charging duration exceed 'charging_max_duration_ms',
  *	cm stop charging.
  * @discharging_max_duration_ms:
  *	Maximum possible duration for discharging with charger cable
  *	after full-batt. If discharging duration exceed 'discharging
  *	max_duration_ms', cm start charging.
  */
 struct charger_desc {
 	const char *psy_name;

 	enum polling_modes polling_mode;
 	unsigned int polling_interval_ms;

 	unsigned int fullbatt_vchkdrop_ms;
 	unsigned int fullbatt_vchkdrop_uV;
 	unsigned int fullbatt_uV;
 	unsigned int fullbatt_soc;
 	unsigned int fullbatt_full_capacity;

 	enum data_source battery_present;

 	const char **psy_charger_stat;

 	int num_charger_regulators;
 	struct charger_regulator *charger_regulators;

 	const char *psy_fuel_gauge;

 	const char *thermal_zone;

 	int temp_min;
 	int temp_max;
 	int temp_diff;

 	bool measure_battery_temp;

 	u32 charging_max_duration_ms;
 	u32 discharging_max_duration_ms;
 };

 #define PSY_NAME_MAX	30

 /**
  * struct charger_manager
  * @entry: entry for list
  * @dev: device pointer
  * @desc: instance of charger_desc
  * @fuel_gauge: power_supply for fuel gauge
  * @charger_stat: array of power_supply for chargers
  * @tzd_batt : thermal zone device for battery
  * @charger_enabled: the state of charger
  * @fullbatt_vchk_jiffies_at:
  *	jiffies at the time full battery check will occur.
  * @fullbatt_vchk_work: work queue for full battery check
  * @emergency_stop:
  *	When setting true, stop charging
  * @psy_name_buf: the name of power-supply-class for charger manager
  * @charger_psy: power_supply for charger manager
  * @status_save_ext_pwr_inserted:
  *	saved status of external power before entering suspend-to-RAM
  * @status_save_batt:
  *	saved status of battery before entering suspend-to-RAM
  * @charging_start_time: saved start time of enabling charging
  * @charging_end_time: saved end time of disabling charging
  */
 struct charger_manager {
 	struct list_head entry;
 	struct device *dev;
 	struct charger_desc *desc;

 #ifdef CONFIG_THERMAL
 	struct thermal_zone_device *tzd_batt;
 #endif
 	bool charger_enabled;

 	unsigned long fullbatt_vchk_jiffies_at;
 	struct delayed_work fullbatt_vchk_work;

 	int emergency_stop;

 	char psy_name_buf[PSY_NAME_MAX + 1];
 	struct power_supply_desc charger_psy_desc;
 	struct power_supply *charger_psy;

 	u64 charging_start_time;
 	u64 charging_end_time;
 };

 #ifdef CONFIG_CHARGER_MANAGER
 extern void cm_notify_event(struct power_supply *psy,
 				enum cm_event_types type, char *msg);
 #else
 static inline void cm_notify_event(struct power_supply *psy,
 				enum cm_event_types type, char *msg) { }
 #endif
 #endif /* _CHARGER_MANAGER_H */
	/*
	* Copyright (C) 2011 Samsung Electronics Co., Ltd.
	* MyungJoo.Ham <myungjoo.ham@samsung.com>
	*
	* Charger Manager.
	* This framework enables to control and multiple chargers and to
	* monitor charging even in the context of suspend-to-RAM with
	* an interface combining the chargers.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	**/

	#ifndef _CHARGER_MANAGER_H
	#define _CHARGER_MANAGER_H

	#include <linux/power_supply.h>
	#include <linux/extcon.h>
	#include <linux/alarmtimer.h>

	enum data_source {
	CM_BATTERY_PRESENT,
	CM_NO_BATTERY,
	CM_FUEL_GAUGE,
	CM_CHARGER_STAT,
	};

	enum polling_modes {
	CM_POLL_DISABLE = 0,
	CM_POLL_ALWAYS,
	CM_POLL_EXTERNAL_POWER_ONLY,
	CM_POLL_CHARGING_ONLY,
	};

	enum cm_event_types {
	CM_EVENT_UNKNOWN = 0,
	CM_EVENT_BATT_FULL,
	CM_EVENT_BATT_IN,
	CM_EVENT_BATT_OUT,
	CM_EVENT_BATT_OVERHEAT,
	CM_EVENT_BATT_COLD,
	CM_EVENT_EXT_PWR_IN_OUT,
	CM_EVENT_CHG_START_STOP,
	CM_EVENT_OTHERS,
	};

	/**
	* struct charger_cable
	* @extcon_name: the name of extcon device.
	* @name: the name of charger cable(external connector).
	* @extcon_dev: the extcon device.
	* @wq: the workqueue to control charger according to the state of
	* charger cable. If charger cable is attached, enable charger.
	* But if charger cable is detached, disable charger.
	* @nb: the notifier block to receive changed state from EXTCON
	* (External Connector) when charger cable is attached/detached.
	* @attached: the state of charger cable.
	* true: the charger cable is attached
	* false: the charger cable is detached
	* @charger: the instance of struct charger_regulator.
	* @cm: the Charger Manager representing the battery.
	*/
	struct charger_cable {
	const char *extcon_name;
	const char *name;

	/* The charger-manager use Extcon framework */
	struct extcon_specific_cable_nb extcon_dev;
	struct work_struct wq;
	struct notifier_block nb;

	/* The state of charger cable */
	bool attached;

	struct charger_regulator *charger;

	/*
	* Set min/max current of regulator to protect over-current issue
	* according to a kind of charger cable when cable is attached.
	*/
	int min_uA;
	int max_uA;

	struct charger_manager *cm;
	};

	/**
	* struct charger_regulator
	* @regulator_name: the name of regulator for using charger.
	* @consumer: the regulator consumer for the charger.
	* @externally_control:
	* Set if the charger-manager cannot control charger,
	* the charger will be maintained with disabled state.
	* @cables:
	* the array of charger cables to enable/disable charger
	* and set current limit according to constraint data of
	* struct charger_cable if only charger cable included
	* in the array of charger cables is attached/detached.
	* @num_cables: the number of charger cables.
	* @attr_g: Attribute group for the charger(regulator)
	* @attr_name: "name" sysfs entry
	* @attr_state: "state" sysfs entry
	* @attr_externally_control: "externally_control" sysfs entry
	* @attrs: Arrays pointing to attr_name/state/externally_control for attr_g
	*/
	struct charger_regulator {
	/* The name of regulator for charging */
	const char *regulator_name;
	struct regulator *consumer;

	/* charger never on when system is on */
	int externally_control;

	/*
	* Store constraint information related to current limit,
	* each cable have different condition for charging.
	*/
	struct charger_cable *cables;
	int num_cables;

	struct attribute_group attr_g;
	struct device_attribute attr_name;
	struct device_attribute attr_state;
	struct device_attribute attr_externally_control;
	struct attribute *attrs[4];

	struct charger_manager *cm;
	};

	/**
	* struct charger_desc
	* @psy_name: the name of power-supply-class for charger manager
	* @polling_mode:
	* Determine which polling mode will be used
	* @fullbatt_vchkdrop_ms:
	* @fullbatt_vchkdrop_uV:
	* Check voltage drop after the battery is fully charged.
	* If it has dropped more than fullbatt_vchkdrop_uV after
	* fullbatt_vchkdrop_ms, CM will restart charging.
	* @fullbatt_uV: voltage in microvolt
	* If VBATT >= fullbatt_uV, it is assumed to be full.
	* @fullbatt_soc: state of Charge in %
	* If state of Charge >= fullbatt_soc, it is assumed to be full.
	* @fullbatt_full_capacity: full capacity measure
	* If full capacity of battery >= fullbatt_full_capacity,
	* it is assumed to be full.
	* @polling_interval_ms: interval in millisecond at which
	* charger manager will monitor battery health
	* @battery_present:
	* Specify where information for existence of battery can be obtained
	* @psy_charger_stat: the names of power-supply for chargers
	* @num_charger_regulator: the number of entries in charger_regulators
	* @charger_regulators: array of charger regulators
	* @psy_fuel_gauge: the name of power-supply for fuel gauge
	* @thermal_zone : the name of thermal zone for battery
	* @temp_min : Minimum battery temperature for charging.
	* @temp_max : Maximum battery temperature for charging.
	* @temp_diff : Temperature difference to restart charging.
	* @measure_battery_temp:
	* true: measure battery temperature
	* false: measure ambient temperature
	* @charging_max_duration_ms: Maximum possible duration for charging
	* If whole charging duration exceed 'charging_max_duration_ms',
	* cm stop charging.
	* @discharging_max_duration_ms:
	* Maximum possible duration for discharging with charger cable
	* after full-batt. If discharging duration exceed 'discharging
	* max_duration_ms', cm start charging.
	*/
	struct charger_desc {
	const char *psy_name;

	enum polling_modes polling_mode;
	unsigned int polling_interval_ms;

	unsigned int fullbatt_vchkdrop_ms;
	unsigned int fullbatt_vchkdrop_uV;
	unsigned int fullbatt_uV;
	unsigned int fullbatt_soc;
	unsigned int fullbatt_full_capacity;

	enum data_source battery_present;

	const char **psy_charger_stat;

	int num_charger_regulators;
	struct charger_regulator *charger_regulators;

	const char *psy_fuel_gauge;

	const char *thermal_zone;

	int temp_min;
	int temp_max;
	int temp_diff;

	bool measure_battery_temp;

	u32 charging_max_duration_ms;
	u32 discharging_max_duration_ms;
	};

	#define PSY_NAME_MAX 30

	/**
	* struct charger_manager
	* @entry: entry for list
	* @dev: device pointer
	* @desc: instance of charger_desc
	* @fuel_gauge: power_supply for fuel gauge
	* @charger_stat: array of power_supply for chargers
	* @tzd_batt : thermal zone device for battery
	* @charger_enabled: the state of charger
	* @fullbatt_vchk_jiffies_at:
	* jiffies at the time full battery check will occur.
	* @fullbatt_vchk_work: work queue for full battery check
	* @emergency_stop:
	* When setting true, stop charging
	* @psy_name_buf: the name of power-supply-class for charger manager
	* @charger_psy: power_supply for charger manager
	* @status_save_ext_pwr_inserted:
	* saved status of external power before entering suspend-to-RAM
	* @status_save_batt:
	* saved status of battery before entering suspend-to-RAM
	* @charging_start_time: saved start time of enabling charging
	* @charging_end_time: saved end time of disabling charging
	*/
	struct charger_manager {
	struct list_head entry;
	struct device *dev;
	struct charger_desc *desc;

	#ifdef CONFIG_THERMAL
	struct thermal_zone_device *tzd_batt;
	#endif
	bool charger_enabled;

	unsigned long fullbatt_vchk_jiffies_at;
	struct delayed_work fullbatt_vchk_work;

	int emergency_stop;

	char psy_name_buf[PSY_NAME_MAX + 1];
	struct power_supply_desc charger_psy_desc;
	struct power_supply *charger_psy;

	u64 charging_start_time;
	u64 charging_end_time;
	};

	#ifdef CONFIG_CHARGER_MANAGER
	extern void cm_notify_event(struct power_supply *psy,
	enum cm_event_types type, char *msg);
	#else
	static inline void cm_notify_event(struct power_supply *psy,
	enum cm_event_types type, char *msg) { }
	#endif
	#endif /* _CHARGER_MANAGER_H */