drivers/soc/dove/pmu.c - kernel/bruno - Git at Google

 /*
  * Marvell Dove PMU support
  */
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
 #include <linux/reset.h>
 #include <linux/reset-controller.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/soc/dove/pmu.h>
 #include <linux/spinlock.h>

 #define NR_PMU_IRQS		7

 #define PMC_SW_RST		0x30
 #define PMC_IRQ_CAUSE		0x50
 #define PMC_IRQ_MASK		0x54

 #define PMU_PWR			0x10
 #define PMU_ISO			0x58

 struct pmu_data {
 	spinlock_t lock;
 	struct device_node *of_node;
 	void __iomem *pmc_base;
 	void __iomem *pmu_base;
 	struct irq_chip_generic *irq_gc;
 	struct irq_domain *irq_domain;
 #ifdef CONFIG_RESET_CONTROLLER
 	struct reset_controller_dev reset;
 #endif
 };

 /*
  * The PMU contains a register to reset various subsystems within the
  * SoC.  Export this as a reset controller.
  */
 #ifdef CONFIG_RESET_CONTROLLER
 #define rcdev_to_pmu(rcdev) container_of(rcdev, struct pmu_data, reset)

 static int pmu_reset_reset(struct reset_controller_dev *rc, unsigned long id)
 {
 	struct pmu_data *pmu = rcdev_to_pmu(rc);
 	unsigned long flags;
 	u32 val;

 	spin_lock_irqsave(&pmu->lock, flags);
 	val = readl_relaxed(pmu->pmc_base + PMC_SW_RST);
 	writel_relaxed(val & ~BIT(id), pmu->pmc_base + PMC_SW_RST);
 	writel_relaxed(val | BIT(id), pmu->pmc_base + PMC_SW_RST);
 	spin_unlock_irqrestore(&pmu->lock, flags);

 	return 0;
 }

 static int pmu_reset_assert(struct reset_controller_dev *rc, unsigned long id)
 {
 	struct pmu_data *pmu = rcdev_to_pmu(rc);
 	unsigned long flags;
 	u32 val = ~BIT(id);

 	spin_lock_irqsave(&pmu->lock, flags);
 	val &= readl_relaxed(pmu->pmc_base + PMC_SW_RST);
 	writel_relaxed(val, pmu->pmc_base + PMC_SW_RST);
 	spin_unlock_irqrestore(&pmu->lock, flags);

 	return 0;
 }

 static int pmu_reset_deassert(struct reset_controller_dev *rc, unsigned long id)
 {
 	struct pmu_data *pmu = rcdev_to_pmu(rc);
 	unsigned long flags;
 	u32 val = BIT(id);

 	spin_lock_irqsave(&pmu->lock, flags);
 	val |= readl_relaxed(pmu->pmc_base + PMC_SW_RST);
 	writel_relaxed(val, pmu->pmc_base + PMC_SW_RST);
 	spin_unlock_irqrestore(&pmu->lock, flags);

 	return 0;
 }

 static struct reset_control_ops pmu_reset_ops = {
 	.reset = pmu_reset_reset,
 	.assert = pmu_reset_assert,
 	.deassert = pmu_reset_deassert,
 };

 static struct reset_controller_dev pmu_reset __initdata = {
 	.ops = &pmu_reset_ops,
 	.owner = THIS_MODULE,
 	.nr_resets = 32,
 };

 static void __init pmu_reset_init(struct pmu_data *pmu)
 {
 	int ret;

 	pmu->reset = pmu_reset;
 	pmu->reset.of_node = pmu->of_node;

 	ret = reset_controller_register(&pmu->reset);
 	if (ret)
 		pr_err("pmu: %s failed: %d\n", "reset_controller_register", ret);
 }
 #else
 static void __init pmu_reset_init(struct pmu_data *pmu)
 {
 }
 #endif

 struct pmu_domain {
 	struct pmu_data *pmu;
 	u32 pwr_mask;
 	u32 rst_mask;
 	u32 iso_mask;
 	struct generic_pm_domain base;
 };

 #define to_pmu_domain(dom) container_of(dom, struct pmu_domain, base)

 /*
  * This deals with the "old" Marvell sequence of bringing a power domain
  * down/up, which is: apply power, release reset, disable isolators.
  *
  * Later devices apparantly use a different sequence: power up, disable
  * isolators, assert repair signal, enable SRMA clock, enable AXI clock,
  * enable module clock, deassert reset.
  *
  * Note: reading the assembly, it seems that the IO accessors have an
  * unfortunate side-effect - they cause memory already read into registers
  * for the if () to be re-read for the bit-set or bit-clear operation.
  * The code is written to avoid this.
  */
 static int pmu_domain_power_off(struct generic_pm_domain *domain)
 {
 	struct pmu_domain *pmu_dom = to_pmu_domain(domain);
 	struct pmu_data *pmu = pmu_dom->pmu;
 	unsigned long flags;
 	unsigned int val;
 	void __iomem *pmu_base = pmu->pmu_base;
 	void __iomem *pmc_base = pmu->pmc_base;

 	spin_lock_irqsave(&pmu->lock, flags);

 	/* Enable isolators */
 	if (pmu_dom->iso_mask) {
 		val = ~pmu_dom->iso_mask;
 		val &= readl_relaxed(pmu_base + PMU_ISO);
 		writel_relaxed(val, pmu_base + PMU_ISO);
 	}

 	/* Reset unit */
 	if (pmu_dom->rst_mask) {
 		val = ~pmu_dom->rst_mask;
 		val &= readl_relaxed(pmc_base + PMC_SW_RST);
 		writel_relaxed(val, pmc_base + PMC_SW_RST);
 	}

 	/* Power down */
 	val = readl_relaxed(pmu_base + PMU_PWR) | pmu_dom->pwr_mask;
 	writel_relaxed(val, pmu_base + PMU_PWR);

 	spin_unlock_irqrestore(&pmu->lock, flags);

 	return 0;
 }

 static int pmu_domain_power_on(struct generic_pm_domain *domain)
 {
 	struct pmu_domain *pmu_dom = to_pmu_domain(domain);
 	struct pmu_data *pmu = pmu_dom->pmu;
 	unsigned long flags;
 	unsigned int val;
 	void __iomem *pmu_base = pmu->pmu_base;
 	void __iomem *pmc_base = pmu->pmc_base;

 	spin_lock_irqsave(&pmu->lock, flags);

 	/* Power on */
 	val = ~pmu_dom->pwr_mask & readl_relaxed(pmu_base + PMU_PWR);
 	writel_relaxed(val, pmu_base + PMU_PWR);

 	/* Release reset */
 	if (pmu_dom->rst_mask) {
 		val = pmu_dom->rst_mask;
 		val |= readl_relaxed(pmc_base + PMC_SW_RST);
 		writel_relaxed(val, pmc_base + PMC_SW_RST);
 	}

 	/* Disable isolators */
 	if (pmu_dom->iso_mask) {
 		val = pmu_dom->iso_mask;
 		val |= readl_relaxed(pmu_base + PMU_ISO);
 		writel_relaxed(val, pmu_base + PMU_ISO);
 	}

 	spin_unlock_irqrestore(&pmu->lock, flags);

 	return 0;
 }

 static void __pmu_domain_register(struct pmu_domain *domain,
 	struct device_node *np)
 {
 	unsigned int val = readl_relaxed(domain->pmu->pmu_base + PMU_PWR);

 	domain->base.power_off = pmu_domain_power_off;
 	domain->base.power_on = pmu_domain_power_on;

 	pm_genpd_init(&domain->base, NULL, !(val & domain->pwr_mask));

 	if (np)
 		of_genpd_add_provider_simple(np, &domain->base);
 }

 /* PMU IRQ controller */
 static void pmu_irq_handler(struct irq_desc *desc)
 {
 	struct pmu_data *pmu = irq_desc_get_handler_data(desc);
 	struct irq_chip_generic *gc = pmu->irq_gc;
 	struct irq_domain *domain = pmu->irq_domain;
 	void __iomem *base = gc->reg_base;
 	u32 stat = readl_relaxed(base + PMC_IRQ_CAUSE) & gc->mask_cache;
 	u32 done = ~0;

 	if (stat == 0) {
 		handle_bad_irq(desc);
 		return;
 	}

 	while (stat) {
 		u32 hwirq = fls(stat) - 1;

 		stat &= ~(1 << hwirq);
 		done &= ~(1 << hwirq);

 		generic_handle_irq(irq_find_mapping(domain, hwirq));
 	}

 	/*
 	 * The PMU mask register is not RW0C: it is RW.  This means that
 	 * the bits take whatever value is written to them; if you write
 	 * a '1', you will set the interrupt.
 	 *
 	 * Unfortunately this means there is NO race free way to clear
 	 * these interrupts.
 	 *
 	 * So, let's structure the code so that the window is as small as
 	 * possible.
 	 */
 	irq_gc_lock(gc);
 	done &= readl_relaxed(base + PMC_IRQ_CAUSE);
 	writel_relaxed(done, base + PMC_IRQ_CAUSE);
 	irq_gc_unlock(gc);
 }

 static int __init dove_init_pmu_irq(struct pmu_data *pmu, int irq)
 {
 	const char *name = "pmu_irq";
 	struct irq_chip_generic *gc;
 	struct irq_domain *domain;
 	int ret;

 	/* mask and clear all interrupts */
 	writel(0, pmu->pmc_base + PMC_IRQ_MASK);
 	writel(0, pmu->pmc_base + PMC_IRQ_CAUSE);

 	domain = irq_domain_add_linear(pmu->of_node, NR_PMU_IRQS,
 				       &irq_generic_chip_ops, NULL);
 	if (!domain) {
 		pr_err("%s: unable to add irq domain\n", name);
 		return -ENOMEM;
 	}

 	ret = irq_alloc_domain_generic_chips(domain, NR_PMU_IRQS, 1, name,
 					     handle_level_irq,
 					     IRQ_NOREQUEST | IRQ_NOPROBE, 0,
 					     IRQ_GC_INIT_MASK_CACHE);
 	if (ret) {
 		pr_err("%s: unable to alloc irq domain gc: %d\n", name, ret);
 		irq_domain_remove(domain);
 		return ret;
 	}

 	gc = irq_get_domain_generic_chip(domain, 0);
 	gc->reg_base = pmu->pmc_base;
 	gc->chip_types[0].regs.mask = PMC_IRQ_MASK;
 	gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
 	gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;

 	pmu->irq_domain = domain;
 	pmu->irq_gc = gc;

 	irq_set_handler_data(irq, pmu);
 	irq_set_chained_handler(irq, pmu_irq_handler);

 	return 0;
 }

 /*
  * pmu: power-manager@d0000 {
  *	compatible = "marvell,dove-pmu";
  *	reg = <0xd0000 0x8000> <0xd8000 0x8000>;
  *	interrupts = <33>;
  *	interrupt-controller;
  *	#reset-cells = 1;
  *	vpu_domain: vpu-domain {
  *		#power-domain-cells = <0>;
  *		marvell,pmu_pwr_mask = <0x00000008>;
  *		marvell,pmu_iso_mask = <0x00000001>;
  *		resets = <&pmu 16>;
  *	};
  *	gpu_domain: gpu-domain {
  *		#power-domain-cells = <0>;
  *		marvell,pmu_pwr_mask = <0x00000004>;
  *		marvell,pmu_iso_mask = <0x00000002>;
  *		resets = <&pmu 18>;
  *	};
  * };
  */
 int __init dove_init_pmu(void)
 {
 	struct device_node *np_pmu, *domains_node, *np;
 	struct pmu_data *pmu;
 	int ret, parent_irq;

 	/* Lookup the PMU node */
 	np_pmu = of_find_compatible_node(NULL, NULL, "marvell,dove-pmu");
 	if (!np_pmu)
 		return 0;

 	domains_node = of_get_child_by_name(np_pmu, "domains");
 	if (!domains_node) {
 		pr_err("%s: failed to find domains sub-node\n", np_pmu->name);
 		return 0;
 	}

 	pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
 	if (!pmu)
 		return -ENOMEM;

 	spin_lock_init(&pmu->lock);
 	pmu->of_node = np_pmu;
 	pmu->pmc_base = of_iomap(pmu->of_node, 0);
 	pmu->pmu_base = of_iomap(pmu->of_node, 1);
 	if (!pmu->pmc_base || !pmu->pmu_base) {
 		pr_err("%s: failed to map PMU\n", np_pmu->name);
 		iounmap(pmu->pmu_base);
 		iounmap(pmu->pmc_base);
 		kfree(pmu);
 		return -ENOMEM;
 	}

 	pmu_reset_init(pmu);

 	for_each_available_child_of_node(domains_node, np) {
 		struct of_phandle_args args;
 		struct pmu_domain *domain;

 		domain = kzalloc(sizeof(*domain), GFP_KERNEL);
 		if (!domain)
 			break;

 		domain->pmu = pmu;
 		domain->base.name = kstrdup(np->name, GFP_KERNEL);
 		if (!domain->base.name) {
 			kfree(domain);
 			break;
 		}

 		of_property_read_u32(np, "marvell,pmu_pwr_mask",
 				     &domain->pwr_mask);
 		of_property_read_u32(np, "marvell,pmu_iso_mask",
 				     &domain->iso_mask);

 		/*
 		 * We parse the reset controller property directly here
 		 * to ensure that we can operate when the reset controller
 		 * support is not configured into the kernel.
 		 */
 		ret = of_parse_phandle_with_args(np, "resets", "#reset-cells",
 						 0, &args);
 		if (ret == 0) {
 			if (args.np == pmu->of_node)
 				domain->rst_mask = BIT(args.args[0]);
 			of_node_put(args.np);
 		}

 		__pmu_domain_register(domain, np);
 	}

 	/* Loss of the interrupt controller is not a fatal error. */
 	parent_irq = irq_of_parse_and_map(pmu->of_node, 0);
 	if (!parent_irq) {
 		pr_err("%s: no interrupt specified\n", np_pmu->name);
 	} else {
 		ret = dove_init_pmu_irq(pmu, parent_irq);
 		if (ret)
 			pr_err("dove_init_pmu_irq() failed: %d\n", ret);
 	}

 	return 0;
 }
	/*
	* Marvell Dove PMU support
	*/
	#include <linux/io.h>
	#include <linux/irq.h>
	#include <linux/irqdomain.h>
	#include <linux/of.h>
	#include <linux/of_irq.h>
	#include <linux/of_address.h>
	#include <linux/platform_device.h>
	#include <linux/pm_domain.h>
	#include <linux/reset.h>
	#include <linux/reset-controller.h>
	#include <linux/sched.h>
	#include <linux/slab.h>
	#include <linux/soc/dove/pmu.h>
	#include <linux/spinlock.h>

	#define NR_PMU_IRQS 7

	#define PMC_SW_RST 0x30
	#define PMC_IRQ_CAUSE 0x50
	#define PMC_IRQ_MASK 0x54

	#define PMU_PWR 0x10
	#define PMU_ISO 0x58

	struct pmu_data {
	spinlock_t lock;
	struct device_node *of_node;
	void __iomem *pmc_base;
	void __iomem *pmu_base;
	struct irq_chip_generic *irq_gc;
	struct irq_domain *irq_domain;
	#ifdef CONFIG_RESET_CONTROLLER
	struct reset_controller_dev reset;
	#endif
	};

	/*
	* The PMU contains a register to reset various subsystems within the
	* SoC. Export this as a reset controller.
	*/
	#ifdef CONFIG_RESET_CONTROLLER
	#define rcdev_to_pmu(rcdev) container_of(rcdev, struct pmu_data, reset)

	static int pmu_reset_reset(struct reset_controller_dev *rc, unsigned long id)
	{
	struct pmu_data *pmu = rcdev_to_pmu(rc);
	unsigned long flags;
	u32 val;

	spin_lock_irqsave(&pmu->lock, flags);
	val = readl_relaxed(pmu->pmc_base + PMC_SW_RST);
	writel_relaxed(val & ~BIT(id), pmu->pmc_base + PMC_SW_RST);
	writel_relaxed(val \| BIT(id), pmu->pmc_base + PMC_SW_RST);
	spin_unlock_irqrestore(&pmu->lock, flags);

	return 0;
	}

	static int pmu_reset_assert(struct reset_controller_dev *rc, unsigned long id)
	{
	struct pmu_data *pmu = rcdev_to_pmu(rc);
	unsigned long flags;
	u32 val = ~BIT(id);

	spin_lock_irqsave(&pmu->lock, flags);
	val &= readl_relaxed(pmu->pmc_base + PMC_SW_RST);
	writel_relaxed(val, pmu->pmc_base + PMC_SW_RST);
	spin_unlock_irqrestore(&pmu->lock, flags);

	return 0;
	}

	static int pmu_reset_deassert(struct reset_controller_dev *rc, unsigned long id)
	{
	struct pmu_data *pmu = rcdev_to_pmu(rc);
	unsigned long flags;
	u32 val = BIT(id);

	spin_lock_irqsave(&pmu->lock, flags);
	val \|= readl_relaxed(pmu->pmc_base + PMC_SW_RST);
	writel_relaxed(val, pmu->pmc_base + PMC_SW_RST);
	spin_unlock_irqrestore(&pmu->lock, flags);

	return 0;
	}

	static struct reset_control_ops pmu_reset_ops = {
	.reset = pmu_reset_reset,
	.assert = pmu_reset_assert,
	.deassert = pmu_reset_deassert,
	};

	static struct reset_controller_dev pmu_reset __initdata = {
	.ops = &pmu_reset_ops,
	.owner = THIS_MODULE,
	.nr_resets = 32,
	};

	static void __init pmu_reset_init(struct pmu_data *pmu)
	{
	int ret;

	pmu->reset = pmu_reset;
	pmu->reset.of_node = pmu->of_node;

	ret = reset_controller_register(&pmu->reset);
	if (ret)
	pr_err("pmu: %s failed: %d\n", "reset_controller_register", ret);
	}
	#else
	static void __init pmu_reset_init(struct pmu_data *pmu)
	{
	}
	#endif

	struct pmu_domain {
	struct pmu_data *pmu;
	u32 pwr_mask;
	u32 rst_mask;
	u32 iso_mask;
	struct generic_pm_domain base;
	};

	#define to_pmu_domain(dom) container_of(dom, struct pmu_domain, base)

	/*
	* This deals with the "old" Marvell sequence of bringing a power domain
	* down/up, which is: apply power, release reset, disable isolators.
	*
	* Later devices apparantly use a different sequence: power up, disable
	* isolators, assert repair signal, enable SRMA clock, enable AXI clock,
	* enable module clock, deassert reset.
	*
	* Note: reading the assembly, it seems that the IO accessors have an
	* unfortunate side-effect - they cause memory already read into registers
	* for the if () to be re-read for the bit-set or bit-clear operation.
	* The code is written to avoid this.
	*/
	static int pmu_domain_power_off(struct generic_pm_domain *domain)
	{
	struct pmu_domain *pmu_dom = to_pmu_domain(domain);
	struct pmu_data *pmu = pmu_dom->pmu;
	unsigned long flags;
	unsigned int val;
	void __iomem *pmu_base = pmu->pmu_base;
	void __iomem *pmc_base = pmu->pmc_base;

	spin_lock_irqsave(&pmu->lock, flags);

	/* Enable isolators */
	if (pmu_dom->iso_mask) {
	val = ~pmu_dom->iso_mask;
	val &= readl_relaxed(pmu_base + PMU_ISO);
	writel_relaxed(val, pmu_base + PMU_ISO);
	}

	/* Reset unit */
	if (pmu_dom->rst_mask) {
	val = ~pmu_dom->rst_mask;
	val &= readl_relaxed(pmc_base + PMC_SW_RST);
	writel_relaxed(val, pmc_base + PMC_SW_RST);
	}

	/* Power down */
	val = readl_relaxed(pmu_base + PMU_PWR) \| pmu_dom->pwr_mask;
	writel_relaxed(val, pmu_base + PMU_PWR);

	spin_unlock_irqrestore(&pmu->lock, flags);

	return 0;
	}

	static int pmu_domain_power_on(struct generic_pm_domain *domain)
	{
	struct pmu_domain *pmu_dom = to_pmu_domain(domain);
	struct pmu_data *pmu = pmu_dom->pmu;
	unsigned long flags;
	unsigned int val;
	void __iomem *pmu_base = pmu->pmu_base;
	void __iomem *pmc_base = pmu->pmc_base;

	spin_lock_irqsave(&pmu->lock, flags);

	/* Power on */
	val = ~pmu_dom->pwr_mask & readl_relaxed(pmu_base + PMU_PWR);
	writel_relaxed(val, pmu_base + PMU_PWR);

	/* Release reset */
	if (pmu_dom->rst_mask) {
	val = pmu_dom->rst_mask;
	val \|= readl_relaxed(pmc_base + PMC_SW_RST);
	writel_relaxed(val, pmc_base + PMC_SW_RST);
	}

	/* Disable isolators */
	if (pmu_dom->iso_mask) {
	val = pmu_dom->iso_mask;
	val \|= readl_relaxed(pmu_base + PMU_ISO);
	writel_relaxed(val, pmu_base + PMU_ISO);
	}

	spin_unlock_irqrestore(&pmu->lock, flags);

	return 0;
	}

	static void __pmu_domain_register(struct pmu_domain *domain,
	struct device_node *np)
	{
	unsigned int val = readl_relaxed(domain->pmu->pmu_base + PMU_PWR);

	domain->base.power_off = pmu_domain_power_off;
	domain->base.power_on = pmu_domain_power_on;

	pm_genpd_init(&domain->base, NULL, !(val & domain->pwr_mask));

	if (np)
	of_genpd_add_provider_simple(np, &domain->base);
	}

	/* PMU IRQ controller */
	static void pmu_irq_handler(struct irq_desc *desc)
	{
	struct pmu_data *pmu = irq_desc_get_handler_data(desc);
	struct irq_chip_generic *gc = pmu->irq_gc;
	struct irq_domain *domain = pmu->irq_domain;
	void __iomem *base = gc->reg_base;
	u32 stat = readl_relaxed(base + PMC_IRQ_CAUSE) & gc->mask_cache;
	u32 done = ~0;

	if (stat == 0) {
	handle_bad_irq(desc);
	return;
	}

	while (stat) {
	u32 hwirq = fls(stat) - 1;

	stat &= ~(1 << hwirq);
	done &= ~(1 << hwirq);

	generic_handle_irq(irq_find_mapping(domain, hwirq));
	}

	/*
	* The PMU mask register is not RW0C: it is RW. This means that
	* the bits take whatever value is written to them; if you write
	* a '1', you will set the interrupt.
	*
	* Unfortunately this means there is NO race free way to clear
	* these interrupts.
	*
	* So, let's structure the code so that the window is as small as
	* possible.
	*/
	irq_gc_lock(gc);
	done &= readl_relaxed(base + PMC_IRQ_CAUSE);
	writel_relaxed(done, base + PMC_IRQ_CAUSE);
	irq_gc_unlock(gc);
	}

	static int __init dove_init_pmu_irq(struct pmu_data *pmu, int irq)
	{
	const char *name = "pmu_irq";
	struct irq_chip_generic *gc;
	struct irq_domain *domain;
	int ret;

	/* mask and clear all interrupts */
	writel(0, pmu->pmc_base + PMC_IRQ_MASK);
	writel(0, pmu->pmc_base + PMC_IRQ_CAUSE);

	domain = irq_domain_add_linear(pmu->of_node, NR_PMU_IRQS,
	&irq_generic_chip_ops, NULL);
	if (!domain) {
	pr_err("%s: unable to add irq domain\n", name);
	return -ENOMEM;
	}

	ret = irq_alloc_domain_generic_chips(domain, NR_PMU_IRQS, 1, name,
	handle_level_irq,
	IRQ_NOREQUEST \| IRQ_NOPROBE, 0,
	IRQ_GC_INIT_MASK_CACHE);
	if (ret) {
	pr_err("%s: unable to alloc irq domain gc: %d\n", name, ret);
	irq_domain_remove(domain);
	return ret;
	}

	gc = irq_get_domain_generic_chip(domain, 0);
	gc->reg_base = pmu->pmc_base;
	gc->chip_types[0].regs.mask = PMC_IRQ_MASK;
	gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
	gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;

	pmu->irq_domain = domain;
	pmu->irq_gc = gc;

	irq_set_handler_data(irq, pmu);
	irq_set_chained_handler(irq, pmu_irq_handler);

	return 0;
	}

	/*
	* pmu: power-manager@d0000 {
	* compatible = "marvell,dove-pmu";
	* reg = <0xd0000 0x8000> <0xd8000 0x8000>;
	* interrupts = <33>;
	* interrupt-controller;
	* #reset-cells = 1;
	* vpu_domain: vpu-domain {
	* #power-domain-cells = <0>;
	* marvell,pmu_pwr_mask = <0x00000008>;
	* marvell,pmu_iso_mask = <0x00000001>;
	* resets = <&pmu 16>;
	* };
	* gpu_domain: gpu-domain {
	* #power-domain-cells = <0>;
	* marvell,pmu_pwr_mask = <0x00000004>;
	* marvell,pmu_iso_mask = <0x00000002>;
	* resets = <&pmu 18>;
	* };
	* };
	*/
	int __init dove_init_pmu(void)
	{
	struct device_node np_pmu, domains_node, *np;
	struct pmu_data *pmu;
	int ret, parent_irq;

	/* Lookup the PMU node */
	np_pmu = of_find_compatible_node(NULL, NULL, "marvell,dove-pmu");
	if (!np_pmu)
	return 0;

	domains_node = of_get_child_by_name(np_pmu, "domains");
	if (!domains_node) {
	pr_err("%s: failed to find domains sub-node\n", np_pmu->name);
	return 0;
	}

	pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
	if (!pmu)
	return -ENOMEM;

	spin_lock_init(&pmu->lock);
	pmu->of_node = np_pmu;
	pmu->pmc_base = of_iomap(pmu->of_node, 0);
	pmu->pmu_base = of_iomap(pmu->of_node, 1);
	if (!pmu->pmc_base \|\| !pmu->pmu_base) {
	pr_err("%s: failed to map PMU\n", np_pmu->name);
	iounmap(pmu->pmu_base);
	iounmap(pmu->pmc_base);
	kfree(pmu);
	return -ENOMEM;
	}

	pmu_reset_init(pmu);

	for_each_available_child_of_node(domains_node, np) {
	struct of_phandle_args args;
	struct pmu_domain *domain;

	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
	if (!domain)
	break;

	domain->pmu = pmu;
	domain->base.name = kstrdup(np->name, GFP_KERNEL);
	if (!domain->base.name) {
	kfree(domain);
	break;
	}

	of_property_read_u32(np, "marvell,pmu_pwr_mask",
	&domain->pwr_mask);
	of_property_read_u32(np, "marvell,pmu_iso_mask",
	&domain->iso_mask);

	/*
	* We parse the reset controller property directly here
	* to ensure that we can operate when the reset controller
	* support is not configured into the kernel.
	*/
	ret = of_parse_phandle_with_args(np, "resets", "#reset-cells",
	0, &args);
	if (ret == 0) {
	if (args.np == pmu->of_node)
	domain->rst_mask = BIT(args.args[0]);
	of_node_put(args.np);
	}

	__pmu_domain_register(domain, np);
	}

	/* Loss of the interrupt controller is not a fatal error. */
	parent_irq = irq_of_parse_and_map(pmu->of_node, 0);
	if (!parent_irq) {
	pr_err("%s: no interrupt specified\n", np_pmu->name);
	} else {
	ret = dove_init_pmu_irq(pmu, parent_irq);
	if (ret)
	pr_err("dove_init_pmu_irq() failed: %d\n", ret);
	}

	return 0;
	}