| /* |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * This file contains the implementation of the SCIC_SDS_REMOTE_NODE_TABLE |
| * public, protected, and private methods. |
| * |
| * |
| */ |
| #include "remote_node_table.h" |
| #include "remote_node_context.h" |
| |
| /** |
| * |
| * @remote_node_table: This is the remote node index table from which the |
| * selection will be made. |
| * @group_table_index: This is the index to the group table from which to |
| * search for an available selection. |
| * |
| * This routine will find the bit position in absolute bit terms of the next 32 |
| * + bit position. If there are available bits in the first u32 then it is |
| * just bit position. u32 This is the absolute bit position for an available |
| * group. |
| */ |
| static u32 sci_remote_node_table_get_group_index( |
| struct sci_remote_node_table *remote_node_table, |
| u32 group_table_index) |
| { |
| u32 dword_index; |
| u32 *group_table; |
| u32 bit_index; |
| |
| group_table = remote_node_table->remote_node_groups[group_table_index]; |
| |
| for (dword_index = 0; dword_index < remote_node_table->group_array_size; dword_index++) { |
| if (group_table[dword_index] != 0) { |
| for (bit_index = 0; bit_index < 32; bit_index++) { |
| if ((group_table[dword_index] & (1 << bit_index)) != 0) { |
| return (dword_index * 32) + bit_index; |
| } |
| } |
| } |
| } |
| |
| return SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX; |
| } |
| |
| /** |
| * |
| * @out]: remote_node_table This the remote node table in which to clear the |
| * selector. |
| * @set_index: This is the remote node selector in which the change will be |
| * made. |
| * @group_index: This is the bit index in the table to be modified. |
| * |
| * This method will clear the group index entry in the specified group index |
| * table. none |
| */ |
| static void sci_remote_node_table_clear_group_index( |
| struct sci_remote_node_table *remote_node_table, |
| u32 group_table_index, |
| u32 group_index) |
| { |
| u32 dword_index; |
| u32 bit_index; |
| u32 *group_table; |
| |
| BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); |
| BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); |
| |
| dword_index = group_index / 32; |
| bit_index = group_index % 32; |
| group_table = remote_node_table->remote_node_groups[group_table_index]; |
| |
| group_table[dword_index] = group_table[dword_index] & ~(1 << bit_index); |
| } |
| |
| /** |
| * |
| * @out]: remote_node_table This the remote node table in which to set the |
| * selector. |
| * @group_table_index: This is the remote node selector in which the change |
| * will be made. |
| * @group_index: This is the bit position in the table to be modified. |
| * |
| * This method will set the group index bit entry in the specified gropu index |
| * table. none |
| */ |
| static void sci_remote_node_table_set_group_index( |
| struct sci_remote_node_table *remote_node_table, |
| u32 group_table_index, |
| u32 group_index) |
| { |
| u32 dword_index; |
| u32 bit_index; |
| u32 *group_table; |
| |
| BUG_ON(group_table_index >= SCU_STP_REMOTE_NODE_COUNT); |
| BUG_ON(group_index >= (u32)(remote_node_table->group_array_size * 32)); |
| |
| dword_index = group_index / 32; |
| bit_index = group_index % 32; |
| group_table = remote_node_table->remote_node_groups[group_table_index]; |
| |
| group_table[dword_index] = group_table[dword_index] | (1 << bit_index); |
| } |
| |
| /** |
| * |
| * @out]: remote_node_table This is the remote node table in which to modify |
| * the remote node availability. |
| * @remote_node_index: This is the remote node index that is being returned to |
| * the table. |
| * |
| * This method will set the remote to available in the remote node allocation |
| * table. none |
| */ |
| static void sci_remote_node_table_set_node_index( |
| struct sci_remote_node_table *remote_node_table, |
| u32 remote_node_index) |
| { |
| u32 dword_location; |
| u32 dword_remainder; |
| u32 slot_normalized; |
| u32 slot_position; |
| |
| BUG_ON( |
| (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) |
| <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) |
| ); |
| |
| dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; |
| dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; |
| slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); |
| slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; |
| |
| remote_node_table->available_remote_nodes[dword_location] |= |
| 1 << (slot_normalized + slot_position); |
| } |
| |
| /** |
| * |
| * @out]: remote_node_table This is the remote node table from which to clear |
| * the available remote node bit. |
| * @remote_node_index: This is the remote node index which is to be cleared |
| * from the table. |
| * |
| * This method clears the remote node index from the table of available remote |
| * nodes. none |
| */ |
| static void sci_remote_node_table_clear_node_index( |
| struct sci_remote_node_table *remote_node_table, |
| u32 remote_node_index) |
| { |
| u32 dword_location; |
| u32 dword_remainder; |
| u32 slot_position; |
| u32 slot_normalized; |
| |
| BUG_ON( |
| (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) |
| <= (remote_node_index / SCU_STP_REMOTE_NODE_COUNT) |
| ); |
| |
| dword_location = remote_node_index / SCIC_SDS_REMOTE_NODES_PER_DWORD; |
| dword_remainder = remote_node_index % SCIC_SDS_REMOTE_NODES_PER_DWORD; |
| slot_normalized = (dword_remainder / SCU_STP_REMOTE_NODE_COUNT) * sizeof(u32); |
| slot_position = remote_node_index % SCU_STP_REMOTE_NODE_COUNT; |
| |
| remote_node_table->available_remote_nodes[dword_location] &= |
| ~(1 << (slot_normalized + slot_position)); |
| } |
| |
| /** |
| * |
| * @out]: remote_node_table The remote node table from which the slot will be |
| * cleared. |
| * @group_index: The index for the slot that is to be cleared. |
| * |
| * This method clears the entire table slot at the specified slot index. none |
| */ |
| static void sci_remote_node_table_clear_group( |
| struct sci_remote_node_table *remote_node_table, |
| u32 group_index) |
| { |
| u32 dword_location; |
| u32 dword_remainder; |
| u32 dword_value; |
| |
| BUG_ON( |
| (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) |
| <= (group_index / SCU_STP_REMOTE_NODE_COUNT) |
| ); |
| |
| dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; |
| dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; |
| |
| dword_value = remote_node_table->available_remote_nodes[dword_location]; |
| dword_value &= ~(SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); |
| remote_node_table->available_remote_nodes[dword_location] = dword_value; |
| } |
| |
| /** |
| * |
| * @remote_node_table: |
| * |
| * THis method sets an entire remote node group in the remote node table. |
| */ |
| static void sci_remote_node_table_set_group( |
| struct sci_remote_node_table *remote_node_table, |
| u32 group_index) |
| { |
| u32 dword_location; |
| u32 dword_remainder; |
| u32 dword_value; |
| |
| BUG_ON( |
| (remote_node_table->available_nodes_array_size * SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD) |
| <= (group_index / SCU_STP_REMOTE_NODE_COUNT) |
| ); |
| |
| dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; |
| dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; |
| |
| dword_value = remote_node_table->available_remote_nodes[dword_location]; |
| dword_value |= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); |
| remote_node_table->available_remote_nodes[dword_location] = dword_value; |
| } |
| |
| /** |
| * |
| * @remote_node_table: This is the remote node table that for which the group |
| * value is to be returned. |
| * @group_index: This is the group index to use to find the group value. |
| * |
| * This method will return the group value for the specified group index. The |
| * bit values at the specified remote node group index. |
| */ |
| static u8 sci_remote_node_table_get_group_value( |
| struct sci_remote_node_table *remote_node_table, |
| u32 group_index) |
| { |
| u32 dword_location; |
| u32 dword_remainder; |
| u32 dword_value; |
| |
| dword_location = group_index / SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; |
| dword_remainder = group_index % SCIC_SDS_REMOTE_NODE_SETS_PER_DWORD; |
| |
| dword_value = remote_node_table->available_remote_nodes[dword_location]; |
| dword_value &= (SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE << (dword_remainder * 4)); |
| dword_value = dword_value >> (dword_remainder * 4); |
| |
| return (u8)dword_value; |
| } |
| |
| /** |
| * |
| * @out]: remote_node_table The remote that which is to be initialized. |
| * @remote_node_entries: The number of entries to put in the table. |
| * |
| * This method will initialize the remote node table for use. none |
| */ |
| void sci_remote_node_table_initialize( |
| struct sci_remote_node_table *remote_node_table, |
| u32 remote_node_entries) |
| { |
| u32 index; |
| |
| /* |
| * Initialize the raw data we could improve the speed by only initializing |
| * those entries that we are actually going to be used */ |
| memset( |
| remote_node_table->available_remote_nodes, |
| 0x00, |
| sizeof(remote_node_table->available_remote_nodes) |
| ); |
| |
| memset( |
| remote_node_table->remote_node_groups, |
| 0x00, |
| sizeof(remote_node_table->remote_node_groups) |
| ); |
| |
| /* Initialize the available remote node sets */ |
| remote_node_table->available_nodes_array_size = (u16) |
| (remote_node_entries / SCIC_SDS_REMOTE_NODES_PER_DWORD) |
| + ((remote_node_entries % SCIC_SDS_REMOTE_NODES_PER_DWORD) != 0); |
| |
| |
| /* Initialize each full DWORD to a FULL SET of remote nodes */ |
| for (index = 0; index < remote_node_entries; index++) { |
| sci_remote_node_table_set_node_index(remote_node_table, index); |
| } |
| |
| remote_node_table->group_array_size = (u16) |
| (remote_node_entries / (SCU_STP_REMOTE_NODE_COUNT * 32)) |
| + ((remote_node_entries % (SCU_STP_REMOTE_NODE_COUNT * 32)) != 0); |
| |
| for (index = 0; index < (remote_node_entries / SCU_STP_REMOTE_NODE_COUNT); index++) { |
| /* |
| * These are all guaranteed to be full slot values so fill them in the |
| * available sets of 3 remote nodes */ |
| sci_remote_node_table_set_group_index(remote_node_table, 2, index); |
| } |
| |
| /* Now fill in any remainders that we may find */ |
| if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 2) { |
| sci_remote_node_table_set_group_index(remote_node_table, 1, index); |
| } else if ((remote_node_entries % SCU_STP_REMOTE_NODE_COUNT) == 1) { |
| sci_remote_node_table_set_group_index(remote_node_table, 0, index); |
| } |
| } |
| |
| /** |
| * |
| * @out]: remote_node_table The remote node table from which to allocate a |
| * remote node. |
| * @table_index: The group index that is to be used for the search. |
| * |
| * This method will allocate a single RNi from the remote node table. The |
| * table index will determine from which remote node group table to search. |
| * This search may fail and another group node table can be specified. The |
| * function is designed to allow a serach of the available single remote node |
| * group up to the triple remote node group. If an entry is found in the |
| * specified table the remote node is removed and the remote node groups are |
| * updated. The RNi value or an invalid remote node context if an RNi can not |
| * be found. |
| */ |
| static u16 sci_remote_node_table_allocate_single_remote_node( |
| struct sci_remote_node_table *remote_node_table, |
| u32 group_table_index) |
| { |
| u8 index; |
| u8 group_value; |
| u32 group_index; |
| u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; |
| |
| group_index = sci_remote_node_table_get_group_index( |
| remote_node_table, group_table_index); |
| |
| /* We could not find an available slot in the table selector 0 */ |
| if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { |
| group_value = sci_remote_node_table_get_group_value( |
| remote_node_table, group_index); |
| |
| for (index = 0; index < SCU_STP_REMOTE_NODE_COUNT; index++) { |
| if (((1 << index) & group_value) != 0) { |
| /* We have selected a bit now clear it */ |
| remote_node_index = (u16)(group_index * SCU_STP_REMOTE_NODE_COUNT |
| + index); |
| |
| sci_remote_node_table_clear_group_index( |
| remote_node_table, group_table_index, group_index |
| ); |
| |
| sci_remote_node_table_clear_node_index( |
| remote_node_table, remote_node_index |
| ); |
| |
| if (group_table_index > 0) { |
| sci_remote_node_table_set_group_index( |
| remote_node_table, group_table_index - 1, group_index |
| ); |
| } |
| |
| break; |
| } |
| } |
| } |
| |
| return remote_node_index; |
| } |
| |
| /** |
| * |
| * @remote_node_table: This is the remote node table from which to allocate the |
| * remote node entries. |
| * @group_table_index: THis is the group table index which must equal two (2) |
| * for this operation. |
| * |
| * This method will allocate three consecutive remote node context entries. If |
| * there are no remaining triple entries the function will return a failure. |
| * The remote node index that represents three consecutive remote node entries |
| * or an invalid remote node context if none can be found. |
| */ |
| static u16 sci_remote_node_table_allocate_triple_remote_node( |
| struct sci_remote_node_table *remote_node_table, |
| u32 group_table_index) |
| { |
| u32 group_index; |
| u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; |
| |
| group_index = sci_remote_node_table_get_group_index( |
| remote_node_table, group_table_index); |
| |
| if (group_index != SCIC_SDS_REMOTE_NODE_TABLE_INVALID_INDEX) { |
| remote_node_index = (u16)group_index * SCU_STP_REMOTE_NODE_COUNT; |
| |
| sci_remote_node_table_clear_group_index( |
| remote_node_table, group_table_index, group_index |
| ); |
| |
| sci_remote_node_table_clear_group( |
| remote_node_table, group_index |
| ); |
| } |
| |
| return remote_node_index; |
| } |
| |
| /** |
| * |
| * @remote_node_table: This is the remote node table from which the remote node |
| * allocation is to take place. |
| * @remote_node_count: This is ther remote node count which is one of |
| * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). |
| * |
| * This method will allocate a remote node that mataches the remote node count |
| * specified by the caller. Valid values for remote node count is |
| * SCU_SSP_REMOTE_NODE_COUNT(1) or SCU_STP_REMOTE_NODE_COUNT(3). u16 This is |
| * the remote node index that is returned or an invalid remote node context. |
| */ |
| u16 sci_remote_node_table_allocate_remote_node( |
| struct sci_remote_node_table *remote_node_table, |
| u32 remote_node_count) |
| { |
| u16 remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; |
| |
| if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { |
| remote_node_index = |
| sci_remote_node_table_allocate_single_remote_node( |
| remote_node_table, 0); |
| |
| if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { |
| remote_node_index = |
| sci_remote_node_table_allocate_single_remote_node( |
| remote_node_table, 1); |
| } |
| |
| if (remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX) { |
| remote_node_index = |
| sci_remote_node_table_allocate_single_remote_node( |
| remote_node_table, 2); |
| } |
| } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { |
| remote_node_index = |
| sci_remote_node_table_allocate_triple_remote_node( |
| remote_node_table, 2); |
| } |
| |
| return remote_node_index; |
| } |
| |
| /** |
| * |
| * @remote_node_table: |
| * |
| * This method will free a single remote node index back to the remote node |
| * table. This routine will update the remote node groups |
| */ |
| static void sci_remote_node_table_release_single_remote_node( |
| struct sci_remote_node_table *remote_node_table, |
| u16 remote_node_index) |
| { |
| u32 group_index; |
| u8 group_value; |
| |
| group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; |
| |
| group_value = sci_remote_node_table_get_group_value(remote_node_table, group_index); |
| |
| /* |
| * Assert that we are not trying to add an entry to a slot that is already |
| * full. */ |
| BUG_ON(group_value == SCIC_SDS_REMOTE_NODE_TABLE_FULL_SLOT_VALUE); |
| |
| if (group_value == 0x00) { |
| /* |
| * There are no entries in this slot so it must be added to the single |
| * slot table. */ |
| sci_remote_node_table_set_group_index(remote_node_table, 0, group_index); |
| } else if ((group_value & (group_value - 1)) == 0) { |
| /* |
| * There is only one entry in this slot so it must be moved from the |
| * single slot table to the dual slot table */ |
| sci_remote_node_table_clear_group_index(remote_node_table, 0, group_index); |
| sci_remote_node_table_set_group_index(remote_node_table, 1, group_index); |
| } else { |
| /* |
| * There are two entries in the slot so it must be moved from the dual |
| * slot table to the tripple slot table. */ |
| sci_remote_node_table_clear_group_index(remote_node_table, 1, group_index); |
| sci_remote_node_table_set_group_index(remote_node_table, 2, group_index); |
| } |
| |
| sci_remote_node_table_set_node_index(remote_node_table, remote_node_index); |
| } |
| |
| /** |
| * |
| * @remote_node_table: This is the remote node table to which the remote node |
| * index is to be freed. |
| * |
| * This method will release a group of three consecutive remote nodes back to |
| * the free remote nodes. |
| */ |
| static void sci_remote_node_table_release_triple_remote_node( |
| struct sci_remote_node_table *remote_node_table, |
| u16 remote_node_index) |
| { |
| u32 group_index; |
| |
| group_index = remote_node_index / SCU_STP_REMOTE_NODE_COUNT; |
| |
| sci_remote_node_table_set_group_index( |
| remote_node_table, 2, group_index |
| ); |
| |
| sci_remote_node_table_set_group(remote_node_table, group_index); |
| } |
| |
| /** |
| * |
| * @remote_node_table: The remote node table to which the remote node index is |
| * to be freed. |
| * @remote_node_count: This is the count of consecutive remote nodes that are |
| * to be freed. |
| * |
| * This method will release the remote node index back into the remote node |
| * table free pool. |
| */ |
| void sci_remote_node_table_release_remote_node_index( |
| struct sci_remote_node_table *remote_node_table, |
| u32 remote_node_count, |
| u16 remote_node_index) |
| { |
| if (remote_node_count == SCU_SSP_REMOTE_NODE_COUNT) { |
| sci_remote_node_table_release_single_remote_node( |
| remote_node_table, remote_node_index); |
| } else if (remote_node_count == SCU_STP_REMOTE_NODE_COUNT) { |
| sci_remote_node_table_release_triple_remote_node( |
| remote_node_table, remote_node_index); |
| } |
| } |
| |