| /* |
| * Copyright (C) STMicroelectronics SA 2014 |
| * Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics. |
| * License terms: GNU General Public License (GPL), version 2 |
| */ |
| |
| #ifndef _STI_HDMI_H_ |
| #define _STI_HDMI_H_ |
| |
| #include <linux/platform_device.h> |
| |
| #include <drm/drmP.h> |
| |
| #define HDMI_STA 0x0010 |
| #define HDMI_STA_DLL_LCK BIT(5) |
| |
| #define HDMI_STA_HOT_PLUG_SHIFT 4 |
| #define HDMI_STA_HOT_PLUG (1 << HDMI_STA_HOT_PLUG_SHIFT) |
| |
| struct sti_hdmi; |
| |
| struct hdmi_phy_ops { |
| bool (*start)(struct sti_hdmi *hdmi); |
| void (*stop)(struct sti_hdmi *hdmi); |
| }; |
| |
| /** |
| * STI hdmi structure |
| * |
| * @dev: driver device |
| * @drm_dev: pointer to drm device |
| * @mode: current display mode selected |
| * @regs: hdmi register |
| * @syscfg: syscfg register for pll rejection configuration |
| * @clk_pix: hdmi pixel clock |
| * @clk_tmds: hdmi tmds clock |
| * @clk_phy: hdmi phy clock |
| * @clk_audio: hdmi audio clock |
| * @irq: hdmi interrupt number |
| * @irq_status: interrupt status register |
| * @phy_ops: phy start/stop operations |
| * @enabled: true if hdmi is enabled else false |
| * @hpd: hot plug detect status |
| * @wait_event: wait event |
| * @event_received: wait event status |
| * @reset: reset control of the hdmi phy |
| */ |
| struct sti_hdmi { |
| struct device dev; |
| struct drm_device *drm_dev; |
| struct drm_display_mode mode; |
| void __iomem *regs; |
| void __iomem *syscfg; |
| struct clk *clk_pix; |
| struct clk *clk_tmds; |
| struct clk *clk_phy; |
| struct clk *clk_audio; |
| int irq; |
| u32 irq_status; |
| struct hdmi_phy_ops *phy_ops; |
| bool enabled; |
| bool hpd; |
| wait_queue_head_t wait_event; |
| bool event_received; |
| struct reset_control *reset; |
| struct i2c_adapter *ddc_adapt; |
| }; |
| |
| u32 hdmi_read(struct sti_hdmi *hdmi, int offset); |
| void hdmi_write(struct sti_hdmi *hdmi, u32 val, int offset); |
| |
| /** |
| * hdmi phy config structure |
| * |
| * A pointer to an array of these structures is passed to a TMDS (HDMI) output |
| * via the control interface to provide board and SoC specific |
| * configurations of the HDMI PHY. Each entry in the array specifies a hardware |
| * specific configuration for a given TMDS clock frequency range. |
| * |
| * @min_tmds_freq: Lower bound of TMDS clock frequency this entry applies to |
| * @max_tmds_freq: Upper bound of TMDS clock frequency this entry applies to |
| * @config: SoC specific register configuration |
| */ |
| struct hdmi_phy_config { |
| u32 min_tmds_freq; |
| u32 max_tmds_freq; |
| u32 config[4]; |
| }; |
| |
| #endif |