| /* |
| * Alchemy Development Board example suspend userspace interface. |
| * |
| * (c) 2008 Manuel Lauss <mano@roarinelk.homelinux.net> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kobject.h> |
| #include <linux/suspend.h> |
| #include <linux/sysfs.h> |
| #include <asm/mach-au1x00/au1000.h> |
| #include <asm/mach-au1x00/gpio-au1000.h> |
| #include <asm/mach-db1x00/bcsr.h> |
| |
| /* |
| * Generic suspend userspace interface for Alchemy development boards. |
| * This code exports a few sysfs nodes under /sys/power/db1x/ which |
| * can be used by userspace to en/disable all au1x-provided wakeup |
| * sources and configure the timeout after which the the TOYMATCH2 irq |
| * is to trigger a wakeup. |
| */ |
| |
| |
| static unsigned long db1x_pm_sleep_secs; |
| static unsigned long db1x_pm_wakemsk; |
| static unsigned long db1x_pm_last_wakesrc; |
| |
| static int db1x_pm_enter(suspend_state_t state) |
| { |
| unsigned short bcsrs[16]; |
| int i, j, hasint; |
| |
| /* save CPLD regs */ |
| hasint = bcsr_read(BCSR_WHOAMI); |
| hasint = BCSR_WHOAMI_BOARD(hasint) >= BCSR_WHOAMI_DB1200; |
| j = (hasint) ? BCSR_MASKSET : BCSR_SYSTEM; |
| |
| for (i = BCSR_STATUS; i <= j; i++) |
| bcsrs[i] = bcsr_read(i); |
| |
| /* shut off hexleds */ |
| bcsr_write(BCSR_HEXCLEAR, 3); |
| |
| /* enable GPIO based wakeup */ |
| alchemy_gpio1_input_enable(); |
| |
| /* clear and setup wake cause and source */ |
| alchemy_wrsys(0, AU1000_SYS_WAKEMSK); |
| alchemy_wrsys(0, AU1000_SYS_WAKESRC); |
| |
| alchemy_wrsys(db1x_pm_wakemsk, AU1000_SYS_WAKEMSK); |
| |
| /* setup 1Hz-timer-based wakeup: wait for reg access */ |
| while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M20) |
| asm volatile ("nop"); |
| |
| alchemy_wrsys(alchemy_rdsys(AU1000_SYS_TOYREAD) + db1x_pm_sleep_secs, |
| AU1000_SYS_TOYMATCH2); |
| |
| /* wait for value to really hit the register */ |
| while (alchemy_rdsys(AU1000_SYS_CNTRCTRL) & SYS_CNTRL_M20) |
| asm volatile ("nop"); |
| |
| /* ...and now the sandman can come! */ |
| au_sleep(); |
| |
| |
| /* restore CPLD regs */ |
| for (i = BCSR_STATUS; i <= BCSR_SYSTEM; i++) |
| bcsr_write(i, bcsrs[i]); |
| |
| /* restore CPLD int registers */ |
| if (hasint) { |
| bcsr_write(BCSR_INTCLR, 0xffff); |
| bcsr_write(BCSR_MASKCLR, 0xffff); |
| bcsr_write(BCSR_INTSTAT, 0xffff); |
| bcsr_write(BCSR_INTSET, bcsrs[BCSR_INTSET]); |
| bcsr_write(BCSR_MASKSET, bcsrs[BCSR_MASKSET]); |
| } |
| |
| /* light up hexleds */ |
| bcsr_write(BCSR_HEXCLEAR, 0); |
| |
| return 0; |
| } |
| |
| static int db1x_pm_begin(suspend_state_t state) |
| { |
| if (!db1x_pm_wakemsk) { |
| printk(KERN_ERR "db1x: no wakeup source activated!\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void db1x_pm_end(void) |
| { |
| /* read and store wakeup source, the clear the register. To |
| * be able to clear it, WAKEMSK must be cleared first. |
| */ |
| db1x_pm_last_wakesrc = alchemy_rdsys(AU1000_SYS_WAKESRC); |
| |
| alchemy_wrsys(0, AU1000_SYS_WAKEMSK); |
| alchemy_wrsys(0, AU1000_SYS_WAKESRC); |
| } |
| |
| static const struct platform_suspend_ops db1x_pm_ops = { |
| .valid = suspend_valid_only_mem, |
| .begin = db1x_pm_begin, |
| .enter = db1x_pm_enter, |
| .end = db1x_pm_end, |
| }; |
| |
| #define ATTRCMP(x) (0 == strcmp(attr->attr.name, #x)) |
| |
| static ssize_t db1x_pmattr_show(struct kobject *kobj, |
| struct kobj_attribute *attr, |
| char *buf) |
| { |
| int idx; |
| |
| if (ATTRCMP(timer_timeout)) |
| return sprintf(buf, "%lu\n", db1x_pm_sleep_secs); |
| |
| else if (ATTRCMP(timer)) |
| return sprintf(buf, "%u\n", |
| !!(db1x_pm_wakemsk & SYS_WAKEMSK_M2)); |
| |
| else if (ATTRCMP(wakesrc)) |
| return sprintf(buf, "%lu\n", db1x_pm_last_wakesrc); |
| |
| else if (ATTRCMP(gpio0) || ATTRCMP(gpio1) || ATTRCMP(gpio2) || |
| ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) || |
| ATTRCMP(gpio6) || ATTRCMP(gpio7)) { |
| idx = (attr->attr.name)[4] - '0'; |
| return sprintf(buf, "%d\n", |
| !!(db1x_pm_wakemsk & SYS_WAKEMSK_GPIO(idx))); |
| |
| } else if (ATTRCMP(wakemsk)) { |
| return sprintf(buf, "%08lx\n", db1x_pm_wakemsk); |
| } |
| |
| return -ENOENT; |
| } |
| |
| static ssize_t db1x_pmattr_store(struct kobject *kobj, |
| struct kobj_attribute *attr, |
| const char *instr, |
| size_t bytes) |
| { |
| unsigned long l; |
| int tmp; |
| |
| if (ATTRCMP(timer_timeout)) { |
| tmp = kstrtoul(instr, 0, &l); |
| if (tmp) |
| return tmp; |
| |
| db1x_pm_sleep_secs = l; |
| |
| } else if (ATTRCMP(timer)) { |
| if (instr[0] != '0') |
| db1x_pm_wakemsk |= SYS_WAKEMSK_M2; |
| else |
| db1x_pm_wakemsk &= ~SYS_WAKEMSK_M2; |
| |
| } else if (ATTRCMP(gpio0) || ATTRCMP(gpio1) || ATTRCMP(gpio2) || |
| ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) || |
| ATTRCMP(gpio6) || ATTRCMP(gpio7)) { |
| tmp = (attr->attr.name)[4] - '0'; |
| if (instr[0] != '0') { |
| db1x_pm_wakemsk |= SYS_WAKEMSK_GPIO(tmp); |
| } else { |
| db1x_pm_wakemsk &= ~SYS_WAKEMSK_GPIO(tmp); |
| } |
| |
| } else if (ATTRCMP(wakemsk)) { |
| tmp = kstrtoul(instr, 0, &l); |
| if (tmp) |
| return tmp; |
| |
| db1x_pm_wakemsk = l & 0x0000003f; |
| |
| } else |
| bytes = -ENOENT; |
| |
| return bytes; |
| } |
| |
| #define ATTR(x) \ |
| static struct kobj_attribute x##_attribute = \ |
| __ATTR(x, 0664, db1x_pmattr_show, \ |
| db1x_pmattr_store); |
| |
| ATTR(gpio0) /* GPIO-based wakeup enable */ |
| ATTR(gpio1) |
| ATTR(gpio2) |
| ATTR(gpio3) |
| ATTR(gpio4) |
| ATTR(gpio5) |
| ATTR(gpio6) |
| ATTR(gpio7) |
| ATTR(timer) /* TOYMATCH2-based wakeup enable */ |
| ATTR(timer_timeout) /* timer-based wakeup timeout value, in seconds */ |
| ATTR(wakesrc) /* contents of SYS_WAKESRC after last wakeup */ |
| ATTR(wakemsk) /* direct access to SYS_WAKEMSK */ |
| |
| #define ATTR_LIST(x) & x ## _attribute.attr |
| static struct attribute *db1x_pmattrs[] = { |
| ATTR_LIST(gpio0), |
| ATTR_LIST(gpio1), |
| ATTR_LIST(gpio2), |
| ATTR_LIST(gpio3), |
| ATTR_LIST(gpio4), |
| ATTR_LIST(gpio5), |
| ATTR_LIST(gpio6), |
| ATTR_LIST(gpio7), |
| ATTR_LIST(timer), |
| ATTR_LIST(timer_timeout), |
| ATTR_LIST(wakesrc), |
| ATTR_LIST(wakemsk), |
| NULL, /* terminator */ |
| }; |
| |
| static struct attribute_group db1x_pmattr_group = { |
| .name = "db1x", |
| .attrs = db1x_pmattrs, |
| }; |
| |
| /* |
| * Initialize suspend interface |
| */ |
| static int __init pm_init(void) |
| { |
| /* init TOY to tick at 1Hz if not already done. No need to wait |
| * for confirmation since there's plenty of time from here to |
| * the next suspend cycle. |
| */ |
| if (alchemy_rdsys(AU1000_SYS_TOYTRIM) != 32767) |
| alchemy_wrsys(32767, AU1000_SYS_TOYTRIM); |
| |
| db1x_pm_last_wakesrc = alchemy_rdsys(AU1000_SYS_WAKESRC); |
| |
| alchemy_wrsys(0, AU1000_SYS_WAKESRC); |
| alchemy_wrsys(0, AU1000_SYS_WAKEMSK); |
| |
| suspend_set_ops(&db1x_pm_ops); |
| |
| return sysfs_create_group(power_kobj, &db1x_pmattr_group); |
| } |
| |
| late_initcall(pm_init); |