| /* |
| * linux/arch/m32r/platforms/oaks32r/setup.c |
| * |
| * Setup routines for OAKS32R Board |
| * |
| * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, |
| * Hitoshi Yamamoto, Mamoru Sakugawa |
| */ |
| |
| #include <linux/irq.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| |
| #include <asm/m32r.h> |
| #include <asm/io.h> |
| |
| #define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) |
| |
| icu_data_t icu_data[NR_IRQS]; |
| |
| static void disable_oaks32r_irq(unsigned int irq) |
| { |
| unsigned long port, data; |
| |
| port = irq2port(irq); |
| data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; |
| outl(data, port); |
| } |
| |
| static void enable_oaks32r_irq(unsigned int irq) |
| { |
| unsigned long port, data; |
| |
| port = irq2port(irq); |
| data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; |
| outl(data, port); |
| } |
| |
| static void mask_oaks32r(struct irq_data *data) |
| { |
| disable_oaks32r_irq(data->irq); |
| } |
| |
| static void unmask_oaks32r(struct irq_data *data) |
| { |
| enable_oaks32r_irq(data->irq); |
| } |
| |
| static void shutdown_oaks32r(struct irq_data *data) |
| { |
| unsigned long port; |
| |
| port = irq2port(data->irq); |
| outl(M32R_ICUCR_ILEVEL7, port); |
| } |
| |
| static struct irq_chip oaks32r_irq_type = |
| { |
| .name = "OAKS32R-IRQ", |
| .irq_shutdown = shutdown_oaks32r, |
| .irq_mask = mask_oaks32r, |
| .irq_unmask = unmask_oaks32r, |
| }; |
| |
| void __init init_IRQ(void) |
| { |
| static int once = 0; |
| |
| if (once) |
| return; |
| else |
| once++; |
| |
| #ifdef CONFIG_NE2000 |
| /* INT3 : LAN controller (RTL8019AS) */ |
| irq_set_chip_and_handler(M32R_IRQ_INT3, &oaks32r_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; |
| disable_oaks32r_irq(M32R_IRQ_INT3); |
| #endif /* CONFIG_M32R_NE2000 */ |
| |
| /* MFT2 : system timer */ |
| irq_set_chip_and_handler(M32R_IRQ_MFT2, &oaks32r_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; |
| disable_oaks32r_irq(M32R_IRQ_MFT2); |
| |
| #ifdef CONFIG_SERIAL_M32R_SIO |
| /* SIO0_R : uart receive data */ |
| irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &oaks32r_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_SIO0_R].icucr = 0; |
| disable_oaks32r_irq(M32R_IRQ_SIO0_R); |
| |
| /* SIO0_S : uart send data */ |
| irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &oaks32r_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_SIO0_S].icucr = 0; |
| disable_oaks32r_irq(M32R_IRQ_SIO0_S); |
| |
| /* SIO1_R : uart receive data */ |
| irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &oaks32r_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_SIO1_R].icucr = 0; |
| disable_oaks32r_irq(M32R_IRQ_SIO1_R); |
| |
| /* SIO1_S : uart send data */ |
| irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &oaks32r_irq_type, |
| handle_level_irq); |
| icu_data[M32R_IRQ_SIO1_S].icucr = 0; |
| disable_oaks32r_irq(M32R_IRQ_SIO1_S); |
| #endif /* CONFIG_SERIAL_M32R_SIO */ |
| } |