| #ifndef __ASM_ALTERNATIVE_H |
| #define __ASM_ALTERNATIVE_H |
| |
| #ifndef __ASSEMBLY__ |
| |
| #include <linux/init.h> |
| #include <linux/kconfig.h> |
| #include <linux/types.h> |
| #include <linux/stddef.h> |
| #include <linux/stringify.h> |
| |
| struct alt_instr { |
| s32 orig_offset; /* offset to original instruction */ |
| s32 alt_offset; /* offset to replacement instruction */ |
| u16 cpufeature; /* cpufeature bit set for replacement */ |
| u8 orig_len; /* size of original instruction(s) */ |
| u8 alt_len; /* size of new instruction(s), <= orig_len */ |
| }; |
| |
| void __init apply_alternatives_all(void); |
| void apply_alternatives(void *start, size_t length); |
| void free_alternatives_memory(void); |
| |
| #define ALTINSTR_ENTRY(feature) \ |
| " .word 661b - .\n" /* label */ \ |
| " .word 663f - .\n" /* new instruction */ \ |
| " .hword " __stringify(feature) "\n" /* feature bit */ \ |
| " .byte 662b-661b\n" /* source len */ \ |
| " .byte 664f-663f\n" /* replacement len */ |
| |
| /* |
| * alternative assembly primitive: |
| * |
| * If any of these .org directive fail, it means that insn1 and insn2 |
| * don't have the same length. This used to be written as |
| * |
| * .if ((664b-663b) != (662b-661b)) |
| * .error "Alternatives instruction length mismatch" |
| * .endif |
| * |
| * but most assemblers die if insn1 or insn2 have a .inst. This should |
| * be fixed in a binutils release posterior to 2.25.51.0.2 (anything |
| * containing commit 4e4d08cf7399b606 or c1baaddf8861). |
| */ |
| #define __ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg_enabled) \ |
| ".if "__stringify(cfg_enabled)" == 1\n" \ |
| "661:\n\t" \ |
| oldinstr "\n" \ |
| "662:\n" \ |
| ".pushsection .altinstructions,\"a\"\n" \ |
| ALTINSTR_ENTRY(feature) \ |
| ".popsection\n" \ |
| ".pushsection .altinstr_replacement, \"a\"\n" \ |
| "663:\n\t" \ |
| newinstr "\n" \ |
| "664:\n\t" \ |
| ".popsection\n\t" \ |
| ".org . - (664b-663b) + (662b-661b)\n\t" \ |
| ".org . - (662b-661b) + (664b-663b)\n" \ |
| ".endif\n" |
| |
| #define _ALTERNATIVE_CFG(oldinstr, newinstr, feature, cfg, ...) \ |
| __ALTERNATIVE_CFG(oldinstr, newinstr, feature, IS_ENABLED(cfg)) |
| |
| #else |
| |
| .macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len |
| .word \orig_offset - . |
| .word \alt_offset - . |
| .hword \feature |
| .byte \orig_len |
| .byte \alt_len |
| .endm |
| |
| .macro alternative_insn insn1, insn2, cap, enable = 1 |
| .if \enable |
| 661: \insn1 |
| 662: .pushsection .altinstructions, "a" |
| altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f |
| .popsection |
| .pushsection .altinstr_replacement, "ax" |
| 663: \insn2 |
| 664: .popsection |
| .org . - (664b-663b) + (662b-661b) |
| .org . - (662b-661b) + (664b-663b) |
| .endif |
| .endm |
| |
| /* |
| * Begin an alternative code sequence. |
| * |
| * The code that follows this macro will be assembled and linked as |
| * normal. There are no restrictions on this code. |
| */ |
| .macro alternative_if_not cap, enable = 1 |
| .if \enable |
| .pushsection .altinstructions, "a" |
| altinstruction_entry 661f, 663f, \cap, 662f-661f, 664f-663f |
| .popsection |
| 661: |
| .endif |
| .endm |
| |
| /* |
| * Provide the alternative code sequence. |
| * |
| * The code that follows this macro is assembled into a special |
| * section to be used for dynamic patching. Code that follows this |
| * macro must: |
| * |
| * 1. Be exactly the same length (in bytes) as the default code |
| * sequence. |
| * |
| * 2. Not contain a branch target that is used outside of the |
| * alternative sequence it is defined in (branches into an |
| * alternative sequence are not fixed up). |
| */ |
| .macro alternative_else, enable = 1 |
| .if \enable |
| 662: .pushsection .altinstr_replacement, "ax" |
| 663: |
| .endif |
| .endm |
| |
| /* |
| * Complete an alternative code sequence. |
| */ |
| .macro alternative_endif, enable = 1 |
| .if \enable |
| 664: .popsection |
| .org . - (664b-663b) + (662b-661b) |
| .org . - (662b-661b) + (664b-663b) |
| .endif |
| .endm |
| |
| #define _ALTERNATIVE_CFG(insn1, insn2, cap, cfg, ...) \ |
| alternative_insn insn1, insn2, cap, IS_ENABLED(cfg) |
| |
| |
| #endif /* __ASSEMBLY__ */ |
| |
| /* |
| * Usage: asm(ALTERNATIVE(oldinstr, newinstr, feature)); |
| * |
| * Usage: asm(ALTERNATIVE(oldinstr, newinstr, feature, CONFIG_FOO)); |
| * N.B. If CONFIG_FOO is specified, but not selected, the whole block |
| * will be omitted, including oldinstr. |
| */ |
| #define ALTERNATIVE(oldinstr, newinstr, ...) \ |
| _ALTERNATIVE_CFG(oldinstr, newinstr, __VA_ARGS__, 1) |
| |
| #endif /* __ASM_ALTERNATIVE_H */ |