| # |
| # Input core configuration |
| # |
| menuconfig INPUT_KEYBOARD |
| bool "Keyboards" if EMBEDDED || !X86 |
| default y |
| help |
| Say Y here, and a list of supported keyboards will be displayed. |
| This option doesn't affect the kernel. |
| |
| If unsure, say Y. |
| |
| if INPUT_KEYBOARD |
| |
| config KEYBOARD_AAED2000 |
| tristate "AAED-2000 keyboard" |
| depends on MACH_AAED2000 |
| select INPUT_POLLDEV |
| default y |
| help |
| Say Y here to enable the keyboard on the Agilent AAED-2000 |
| development board. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called aaed2000_kbd. |
| |
| config KEYBOARD_ADP5520 |
| tristate "Keypad Support for ADP5520 PMIC" |
| depends on PMIC_ADP5520 |
| help |
| This option enables support for the keypad scan matrix |
| on Analog Devices ADP5520 PMICs. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called adp5520-keys. |
| |
| config KEYBOARD_ADP5588 |
| tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander" |
| depends on I2C |
| help |
| Say Y here if you want to use a ADP5588/87 attached to your |
| system I2C bus. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called adp5588-keys. |
| |
| config KEYBOARD_AMIGA |
| tristate "Amiga keyboard" |
| depends on AMIGA |
| help |
| Say Y here if you are running Linux on any AMIGA and have a keyboard |
| attached. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called amikbd. |
| |
| config ATARI_KBD_CORE |
| bool |
| |
| config KEYBOARD_ATARI |
| tristate "Atari keyboard" |
| depends on ATARI |
| select ATARI_KBD_CORE |
| help |
| Say Y here if you are running Linux on any Atari and have a keyboard |
| attached. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called atakbd. |
| |
| config KEYBOARD_ATKBD |
| tristate "AT keyboard" if EMBEDDED || !X86 |
| default y |
| select SERIO |
| select SERIO_LIBPS2 |
| select SERIO_I8042 if X86 |
| select SERIO_GSCPS2 if GSC |
| help |
| Say Y here if you want to use a standard AT or PS/2 keyboard. Usually |
| you'll need this, unless you have a different type keyboard (USB, ADB |
| or other). This also works for AT and PS/2 keyboards connected over a |
| PS/2 to serial converter. |
| |
| If unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called atkbd. |
| |
| config KEYBOARD_ATKBD_HP_KEYCODES |
| bool "Use HP keyboard scancodes" |
| depends on PARISC && KEYBOARD_ATKBD |
| default y |
| help |
| Say Y here if you have a PA-RISC machine and want to use an AT or |
| PS/2 keyboard, and your keyboard uses keycodes that are specific to |
| PA-RISC keyboards. |
| |
| Say N if you use a standard keyboard. |
| |
| config KEYBOARD_ATKBD_RDI_KEYCODES |
| bool "Use PrecisionBook keyboard scancodes" |
| depends on KEYBOARD_ATKBD_HP_KEYCODES |
| default n |
| help |
| If you have an RDI PrecisionBook, say Y here if you want to use its |
| built-in keyboard (as opposed to an external keyboard). |
| |
| The PrecisionBook has five keys that conflict with those used by most |
| AT and PS/2 keyboards. These are as follows: |
| |
| PrecisionBook Standard AT or PS/2 |
| |
| F1 F12 |
| Left Ctrl Left Alt |
| Caps Lock Left Ctrl |
| Right Ctrl Caps Lock |
| Left 102nd key (the key to the right of Left Shift) |
| |
| If you say N here, and use the PrecisionBook keyboard, then each key |
| in the left-hand column will be interpreted as the corresponding key |
| in the right-hand column. |
| |
| If you say Y here, and use an external keyboard, then each key in the |
| right-hand column will be interpreted as the key shown in the |
| left-hand column. |
| |
| config KEYBOARD_QT2160 |
| tristate "Atmel AT42QT2160 Touch Sensor Chip" |
| depends on I2C && EXPERIMENTAL |
| help |
| If you say yes here you get support for Atmel AT42QT2160 Touch |
| Sensor chip as a keyboard input. |
| |
| This driver can also be built as a module. If so, the module |
| will be called qt2160. |
| |
| config KEYBOARD_BFIN |
| tristate "Blackfin BF54x keypad support" |
| depends on (BF54x && !BF544) |
| help |
| Say Y here if you want to use the BF54x keypad. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called bf54x-keys. |
| |
| config KEYBOARD_LKKBD |
| tristate "DECstation/VAXstation LK201/LK401 keyboard" |
| select SERIO |
| help |
| Say Y here if you want to use a LK201 or LK401 style serial |
| keyboard. This keyboard is also useable on PCs if you attach |
| it with the inputattach program. The connector pinout is |
| described within lkkbd.c. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called lkkbd. |
| |
| config KEYBOARD_EP93XX |
| tristate "EP93xx Matrix Keypad support" |
| depends on ARCH_EP93XX |
| help |
| Say Y here to enable the matrix keypad on the Cirrus EP93XX. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ep93xx_keypad. |
| |
| config KEYBOARD_GPIO |
| tristate "GPIO Buttons" |
| depends on GENERIC_GPIO |
| help |
| This driver implements support for buttons connected |
| to GPIO pins of various CPUs (and some other chips). |
| |
| Say Y here if your device has buttons connected |
| directly to such GPIO pins. Your board-specific |
| setup logic must also provide a platform device, |
| with configuration data saying which GPIOs are used. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gpio_keys. |
| |
| config KEYBOARD_GPIO_POLLED |
| tristate "Polled GPIO buttons" |
| depends on GENERIC_GPIO |
| select INPUT_POLLDEV |
| help |
| This driver implements support for buttons connected |
| to GPIO pins that are not capable of generating interrupts. |
| |
| Say Y here if your device has buttons connected |
| directly to such GPIO pins. Your board-specific |
| setup logic must also provide a platform device, |
| with configuration data saying which GPIOs are used. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gpio_keys_polled. |
| |
| config KEYBOARD_TCA6416 |
| tristate "TCA6416 Keypad Support" |
| depends on I2C |
| help |
| This driver implements basic keypad functionality |
| for keys connected through TCA6416 IO expander |
| |
| Say Y here if your device has keys connected to |
| TCA6416 IO expander. Your board-specific setup logic |
| must also provide pin-mask details(of which TCA6416 pins |
| are used for keypad). |
| |
| If enabled the complete TCA6416 device will be managed through |
| this driver. |
| |
| |
| config KEYBOARD_MATRIX |
| tristate "GPIO driven matrix keypad support" |
| depends on GENERIC_GPIO |
| help |
| Enable support for GPIO driven matrix keypad. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called matrix_keypad. |
| |
| config KEYBOARD_HIL_OLD |
| tristate "HP HIL keyboard support (simple driver)" |
| depends on GSC || HP300 |
| default y |
| help |
| The "Human Interface Loop" is a older, 8-channel USB-like |
| controller used in several Hewlett Packard models. This driver |
| was adapted from the one written for m68k/hp300, and implements |
| support for a keyboard attached to the HIL port, but not for |
| any other types of HIL input devices like mice or tablets. |
| However, it has been thoroughly tested and is stable. |
| |
| If you want full HIL support including support for multiple |
| keyboards, mice, and tablets, you have to enable the |
| "HP System Device Controller i8042 Support" in the input/serio |
| submenu. |
| |
| config KEYBOARD_HIL |
| tristate "HP HIL keyboard/pointer support" |
| depends on GSC || HP300 |
| default y |
| select HP_SDC |
| select HIL_MLC |
| select SERIO |
| help |
| The "Human Interface Loop" is a older, 8-channel USB-like |
| controller used in several Hewlett Packard models. |
| This driver implements support for HIL-keyboards and pointing |
| devices (mice, tablets, touchscreens) attached |
| to your machine, so normally you should say Y here. |
| |
| config KEYBOARD_HP6XX |
| tristate "HP Jornada 6xx keyboard" |
| depends on SH_HP6XX |
| select INPUT_POLLDEV |
| help |
| Say Y here if you have a HP Jornada 620/660/680/690 and want to |
| support the built-in keyboard. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called jornada680_kbd. |
| |
| config KEYBOARD_HP7XX |
| tristate "HP Jornada 7xx keyboard" |
| depends on SA1100_JORNADA720_SSP && SA1100_SSP |
| help |
| Say Y here if you have a HP Jornada 710/720/728 and want to |
| support the built-in keyboard. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called jornada720_kbd. |
| |
| config KEYBOARD_LM8323 |
| tristate "LM8323 keypad chip" |
| depends on I2C |
| depends on LEDS_CLASS |
| help |
| If you say yes here you get support for the National Semiconductor |
| LM8323 keypad controller. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called lm8323. |
| |
| config KEYBOARD_LOCOMO |
| tristate "LoCoMo Keyboard Support" |
| depends on SHARP_LOCOMO |
| help |
| Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA |
| |
| To compile this driver as a module, choose M here: the |
| module will be called locomokbd. |
| |
| config KEYBOARD_MAPLE |
| tristate "Maple bus keyboard" |
| depends on SH_DREAMCAST && MAPLE |
| help |
| Say Y here if you have a Dreamcast console running Linux and have |
| a keyboard attached to its Maple bus. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called maple_keyb. |
| |
| config KEYBOARD_MAX7359 |
| tristate "Maxim MAX7359 Key Switch Controller" |
| depends on I2C |
| help |
| If you say yes here you get support for the Maxim MAX7359 Key |
| Switch Controller chip. This providers microprocessors with |
| management of up to 64 key switches |
| |
| To compile this driver as a module, choose M here: the |
| module will be called max7359_keypad. |
| |
| config KEYBOARD_MCS |
| tristate "MELFAS MCS Touchkey" |
| depends on I2C |
| help |
| Say Y here if you have the MELFAS MCS5000/5080 touchkey controller |
| chip in your system. |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called mcs_touchkey. |
| |
| config KEYBOARD_IMX |
| tristate "IMX keypad support" |
| depends on ARCH_MXC |
| help |
| Enable support for IMX keypad port. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called imx_keypad. |
| |
| config KEYBOARD_NEWTON |
| tristate "Newton keyboard" |
| select SERIO |
| help |
| Say Y here if you have a Newton keyboard on a serial port. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called newtonkbd. |
| |
| config KEYBOARD_NOMADIK |
| tristate "ST-Ericsson Nomadik SKE keyboard" |
| depends on PLAT_NOMADIK |
| help |
| Say Y here if you want to use a keypad provided on the SKE controller |
| used on the Ux500 and Nomadik platforms |
| |
| To compile this driver as a module, choose M here: the |
| module will be called nmk-ske-keypad. |
| |
| config KEYBOARD_OPENCORES |
| tristate "OpenCores Keyboard Controller" |
| help |
| Say Y here if you want to use the OpenCores Keyboard Controller |
| http://www.opencores.org/project,keyboardcontroller |
| |
| To compile this driver as a module, choose M here; the |
| module will be called opencores-kbd. |
| |
| config KEYBOARD_PXA27x |
| tristate "PXA27x/PXA3xx keypad support" |
| depends on PXA27x || PXA3xx || ARCH_MMP |
| help |
| Enable support for PXA27x/PXA3xx keypad controller. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pxa27x_keypad. |
| |
| config KEYBOARD_PXA930_ROTARY |
| tristate "PXA930/PXA935 Enhanced Rotary Controller Support" |
| depends on CPU_PXA930 || CPU_PXA935 |
| help |
| Enable support for PXA930/PXA935 Enhanced Rotary Controller. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pxa930_rotary. |
| |
| config KEYBOARD_SAMSUNG |
| tristate "Samsung keypad support" |
| depends on SAMSUNG_DEV_KEYPAD |
| help |
| Say Y here if you want to use the Samsung keypad. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called samsung-keypad. |
| |
| config KEYBOARD_STOWAWAY |
| tristate "Stowaway keyboard" |
| select SERIO |
| help |
| Say Y here if you have a Stowaway keyboard on a serial port. |
| Stowaway compatible keyboards like Dicota Input-PDA keyboard |
| are also supported by this driver. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called stowaway. |
| |
| config KEYBOARD_SUNKBD |
| tristate "Sun Type 4 and Type 5 keyboard" |
| select SERIO |
| help |
| Say Y here if you want to use a Sun Type 4 or Type 5 keyboard, |
| connected either to the Sun keyboard connector or to an serial |
| (RS-232) port via a simple adapter. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sunkbd. |
| |
| config KEYBOARD_SH_KEYSC |
| tristate "SuperH KEYSC keypad support" |
| depends on SUPERH || ARCH_SHMOBILE |
| help |
| Say Y here if you want to use a keypad attached to the KEYSC block |
| on SuperH processors such as sh7722 and sh7343. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called sh_keysc. |
| |
| config KEYBOARD_STMPE |
| tristate "STMPE keypad support" |
| depends on MFD_STMPE |
| help |
| Say Y here if you want to use the keypad controller on STMPE I/O |
| expanders. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called stmpe-keypad. |
| |
| config KEYBOARD_DAVINCI |
| tristate "TI DaVinci Key Scan" |
| depends on ARCH_DAVINCI_DM365 |
| help |
| Say Y to enable keypad module support for the TI DaVinci |
| platforms (DM365). |
| |
| To compile this driver as a module, choose M here: the |
| module will be called davinci_keyscan. |
| |
| config KEYBOARD_OMAP |
| tristate "TI OMAP keypad support" |
| depends on (ARCH_OMAP1 || ARCH_OMAP2) |
| help |
| Say Y here if you want to use the OMAP keypad. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called omap-keypad. |
| |
| config KEYBOARD_OMAP4 |
| tristate "TI OMAP4 keypad support" |
| depends on ARCH_OMAP4 |
| help |
| Say Y here if you want to use the OMAP4 keypad. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called omap4-keypad. |
| |
| config KEYBOARD_TNETV107X |
| tristate "TI TNETV107X keypad support" |
| depends on ARCH_DAVINCI_TNETV107X |
| help |
| Say Y here if you want to use the TNETV107X keypad. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called tnetv107x-keypad. |
| |
| config KEYBOARD_TWL4030 |
| tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" |
| depends on TWL4030_CORE |
| help |
| Say Y here if your board use the keypad controller on |
| TWL4030 family chips. It's safe to say enable this |
| even on boards that don't use the keypad controller. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called twl4030_keypad. |
| |
| config KEYBOARD_XTKBD |
| tristate "XT keyboard" |
| select SERIO |
| help |
| Say Y here if you want to use the old IBM PC/XT keyboard (or |
| compatible) on your system. This is only possible with a |
| parallel port keyboard adapter, you cannot connect it to the |
| keyboard port on a PC that runs Linux. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called xtkbd. |
| |
| config KEYBOARD_W90P910 |
| tristate "W90P910 Matrix Keypad support" |
| depends on ARCH_W90X900 |
| help |
| Say Y here to enable the matrix keypad on evaluation board |
| based on W90P910. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called w90p910_keypad. |
| |
| endif |