blob: 8d184ff196429f2d7300d4f03a4edde343235b5b [file] [log] [blame]
/*
* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
/ {
model = "Qualcomm Technologies, Inc. MSM8916";
compatible = "qcom,msm8916";
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
aliases {
sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
sdhc2 = &sdhc_2; /* SDC2 SD card slot */
};
chosen { };
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x0>;
};
CPU1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x1>;
};
CPU2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x2>;
};
CPU3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0x3>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
restart@4ab000 {
compatible = "qcom,pshold";
reg = <0x4ab000 0x4>;
};
msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gcc: qcom,gcc@1800000 {
compatible = "qcom,gcc-msm8916";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0x1800000 0x80000>;
};
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78af000 0x200>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart2: serial@78b0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x78b0000 0x200>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp_dma: dma@7884000 {
compatible = "qcom,bam-v1.7.0";
reg = <0x07884000 0x23000>;
interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
status = "disabled";
};
blsp_spi1: spi@78b5000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b5000 0x600>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 5>, <&blsp_dma 4>;
dma-names = "rx", "tx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi1_default>;
pinctrl-1 = <&spi1_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi2: spi@78b6000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b6000 0x600>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 7>, <&blsp_dma 6>;
dma-names = "rx", "tx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi2_default>;
pinctrl-1 = <&spi2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi3: spi@78b7000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b7000 0x600>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 9>, <&blsp_dma 8>;
dma-names = "rx", "tx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi3_default>;
pinctrl-1 = <&spi3_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi4: spi@78b8000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b8000 0x600>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 11>, <&blsp_dma 10>;
dma-names = "rx", "tx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi4_default>;
pinctrl-1 = <&spi4_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi5: spi@78b9000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078b9000 0x600>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 13>, <&blsp_dma 12>;
dma-names = "rx", "tx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi5_default>;
pinctrl-1 = <&spi5_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_spi6: spi@78ba000 {
compatible = "qcom,spi-qup-v2.2.1";
reg = <0x078ba000 0x600>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
dmas = <&blsp_dma 15>, <&blsp_dma 14>;
dma-names = "rx", "tx";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&spi6_default>;
pinctrl-1 = <&spi6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c2: i2c@78b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b6000 0x1000>;
interrupts = <GIC_SPI 96 0>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c2_default>;
pinctrl-1 = <&i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c4: i2c@78b8000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78b8000 0x1000>;
interrupts = <GIC_SPI 98 0>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c4_default>;
pinctrl-1 = <&i2c4_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
blsp_i2c6: i2c@78ba000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x78ba000 0x1000>;
interrupts = <GIC_SPI 100 0>;
clocks = <&gcc GCC_BLSP1_AHB_CLK>,
<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
clock-names = "iface", "core";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&i2c6_default>;
pinctrl-1 = <&i2c6_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
sdhc_1: sdhci@07824000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07824900 0x11c>, <0x07824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 123 0>, <0 138 0>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
bus-width = <8>;
non-removable;
status = "disabled";
};
sdhc_2: sdhci@07864000 {
compatible = "qcom,sdhci-msm-v4";
reg = <0x07864900 0x11c>, <0x07864000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 125 0>, <0 221 0>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>;
clock-names = "core", "iface";
bus-width = <4>;
status = "disabled";
};
usb_dev: usb@78d9000 {
compatible = "qcom,ci-hdrc";
reg = <0x78d9000 0x400>;
dr_mode = "peripheral";
interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
usb-phy = <&usb_otg>;
status = "disabled";
};
usb_host: ehci@78d9000 {
compatible = "qcom,ehci-host";
reg = <0x78d9000 0x400>;
interrupts = <GIC_SPI 134 IRQ_TYPE_NONE>;
usb-phy = <&usb_otg>;
status = "disabled";
};
usb_otg: phy@78d9000 {
compatible = "qcom,usb-otg-snps";
reg = <0x78d9000 0x400>;
interrupts = <GIC_SPI 134 IRQ_TYPE_EDGE_BOTH>,
<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
qcom,vdd-levels = <1 5 7>;
qcom,phy-init-sequence = <0x44 0x6B 0x24 0x13>;
dr_mode = "peripheral";
qcom,otg-control = <2>; // PMIC
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
<&gcc GCC_USB_HS_SYSTEM_CLK>,
<&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "iface", "core", "sleep";
resets = <&gcc GCC_USB2A_PHY_BCR>,
<&gcc GCC_USB_HS_BCR>;
reset-names = "phy", "link";
status = "disabled";
};
intc: interrupt-controller@b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
};
timer@b020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xb020000 0x1000>;
clock-frequency = <19200000>;
frame@b021000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb021000 0x1000>,
<0xb022000 0x1000>;
};
frame@b023000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb023000 0x1000>;
status = "disabled";
};
frame@b024000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb024000 0x1000>;
status = "disabled";
};
frame@b025000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb025000 0x1000>;
status = "disabled";
};
frame@b026000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb026000 0x1000>;
status = "disabled";
};
frame@b027000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb027000 0x1000>;
status = "disabled";
};
frame@b028000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xb028000 0x1000>;
status = "disabled";
};
};
spmi_bus: spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x200f000 0x001000>,
<0x2400000 0x400000>,
<0x2c00000 0x400000>,
<0x3800000 0x200000>,
<0x200a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
rng@22000 {
compatible = "qcom,prng";
reg = <0x00022000 0x200>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
};
};
#include "msm8916-pins.dtsi"