| /* |
| * Marvell Wireless LAN device driver: debugfs |
| * |
| * Copyright (C) 2011-2014, Marvell International Ltd. |
| * |
| * This software file (the "File") is distributed by Marvell International |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 |
| * (the "License"). You may use, redistribute and/or modify this File in |
| * accordance with the terms and conditions of the License, a copy of which |
| * is available by writing to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. |
| * |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about |
| * this warranty disclaimer. |
| */ |
| |
| #include <linux/debugfs.h> |
| |
| #include "main.h" |
| #include "11n.h" |
| |
| |
| static struct dentry *mwifiex_dfs_dir; |
| |
| static char *bss_modes[] = { |
| "UNSPECIFIED", |
| "ADHOC", |
| "STATION", |
| "AP", |
| "AP_VLAN", |
| "WDS", |
| "MONITOR", |
| "MESH_POINT", |
| "P2P_CLIENT", |
| "P2P_GO", |
| "P2P_DEVICE", |
| }; |
| |
| /* |
| * Proc info file read handler. |
| * |
| * This function is called when the 'info' file is opened for reading. |
| * It prints the following driver related information - |
| * - Driver name |
| * - Driver version |
| * - Driver extended version |
| * - Interface name |
| * - BSS mode |
| * - Media state (connected or disconnected) |
| * - MAC address |
| * - Total number of Tx bytes |
| * - Total number of Rx bytes |
| * - Total number of Tx packets |
| * - Total number of Rx packets |
| * - Total number of dropped Tx packets |
| * - Total number of dropped Rx packets |
| * - Total number of corrupted Tx packets |
| * - Total number of corrupted Rx packets |
| * - Carrier status (on or off) |
| * - Tx queue status (started or stopped) |
| * |
| * For STA mode drivers, it also prints the following extra - |
| * - ESSID |
| * - BSSID |
| * - Channel |
| * - Region code |
| * - Multicast count |
| * - Multicast addresses |
| */ |
| static ssize_t |
| mwifiex_info_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = |
| (struct mwifiex_private *) file->private_data; |
| struct net_device *netdev = priv->netdev; |
| struct netdev_hw_addr *ha; |
| struct netdev_queue *txq; |
| unsigned long page = get_zeroed_page(GFP_KERNEL); |
| char *p = (char *) page, fmt[64]; |
| struct mwifiex_bss_info info; |
| ssize_t ret; |
| int i = 0; |
| |
| if (!p) |
| return -ENOMEM; |
| |
| memset(&info, 0, sizeof(info)); |
| ret = mwifiex_get_bss_info(priv, &info); |
| if (ret) |
| goto free_and_exit; |
| |
| mwifiex_drv_get_driver_version(priv->adapter, fmt, sizeof(fmt) - 1); |
| |
| if (!priv->version_str[0]) |
| mwifiex_get_ver_ext(priv); |
| |
| p += sprintf(p, "driver_name = " "\"mwifiex\"\n"); |
| p += sprintf(p, "driver_version = %s", fmt); |
| p += sprintf(p, "\nverext = %s", priv->version_str); |
| p += sprintf(p, "\ninterface_name=\"%s\"\n", netdev->name); |
| |
| if (info.bss_mode >= ARRAY_SIZE(bss_modes)) |
| p += sprintf(p, "bss_mode=\"%d\"\n", info.bss_mode); |
| else |
| p += sprintf(p, "bss_mode=\"%s\"\n", bss_modes[info.bss_mode]); |
| |
| p += sprintf(p, "media_state=\"%s\"\n", |
| (!priv->media_connected ? "Disconnected" : "Connected")); |
| p += sprintf(p, "mac_address=\"%pM\"\n", netdev->dev_addr); |
| |
| if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA) { |
| p += sprintf(p, "multicast_count=\"%d\"\n", |
| netdev_mc_count(netdev)); |
| p += sprintf(p, "essid=\"%s\"\n", info.ssid.ssid); |
| p += sprintf(p, "bssid=\"%pM\"\n", info.bssid); |
| p += sprintf(p, "channel=\"%d\"\n", (int) info.bss_chan); |
| p += sprintf(p, "country_code = \"%s\"\n", info.country_code); |
| |
| netdev_for_each_mc_addr(ha, netdev) |
| p += sprintf(p, "multicast_address[%d]=\"%pM\"\n", |
| i++, ha->addr); |
| } |
| |
| p += sprintf(p, "num_tx_bytes = %lu\n", priv->stats.tx_bytes); |
| p += sprintf(p, "num_rx_bytes = %lu\n", priv->stats.rx_bytes); |
| p += sprintf(p, "num_tx_pkts = %lu\n", priv->stats.tx_packets); |
| p += sprintf(p, "num_rx_pkts = %lu\n", priv->stats.rx_packets); |
| p += sprintf(p, "num_tx_pkts_dropped = %lu\n", priv->stats.tx_dropped); |
| p += sprintf(p, "num_rx_pkts_dropped = %lu\n", priv->stats.rx_dropped); |
| p += sprintf(p, "num_tx_pkts_err = %lu\n", priv->stats.tx_errors); |
| p += sprintf(p, "num_rx_pkts_err = %lu\n", priv->stats.rx_errors); |
| p += sprintf(p, "carrier %s\n", ((netif_carrier_ok(priv->netdev)) |
| ? "on" : "off")); |
| p += sprintf(p, "tx queue"); |
| for (i = 0; i < netdev->num_tx_queues; i++) { |
| txq = netdev_get_tx_queue(netdev, i); |
| p += sprintf(p, " %d:%s", i, netif_tx_queue_stopped(txq) ? |
| "stopped" : "started"); |
| } |
| p += sprintf(p, "\n"); |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, |
| (unsigned long) p - page); |
| |
| free_and_exit: |
| free_page(page); |
| return ret; |
| } |
| |
| /* |
| * Proc device dump read handler. |
| * |
| * This function is called when the 'device_dump' file is opened for |
| * reading. |
| * This function dumps driver information and firmware memory segments |
| * (ex. DTCM, ITCM, SQRAM etc.) for |
| * debugging. |
| */ |
| static ssize_t |
| mwifiex_device_dump_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = file->private_data; |
| |
| if (!priv->adapter->if_ops.device_dump) |
| return -EIO; |
| |
| priv->adapter->if_ops.device_dump(priv->adapter); |
| |
| return 0; |
| } |
| |
| /* |
| * Proc getlog file read handler. |
| * |
| * This function is called when the 'getlog' file is opened for reading |
| * It prints the following log information - |
| * - Number of multicast Tx frames |
| * - Number of failed packets |
| * - Number of Tx retries |
| * - Number of multicast Tx retries |
| * - Number of duplicate frames |
| * - Number of RTS successes |
| * - Number of RTS failures |
| * - Number of ACK failures |
| * - Number of fragmented Rx frames |
| * - Number of multicast Rx frames |
| * - Number of FCS errors |
| * - Number of Tx frames |
| * - WEP ICV error counts |
| * - Number of received beacons |
| * - Number of missed beacons |
| */ |
| static ssize_t |
| mwifiex_getlog_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = |
| (struct mwifiex_private *) file->private_data; |
| unsigned long page = get_zeroed_page(GFP_KERNEL); |
| char *p = (char *) page; |
| ssize_t ret; |
| struct mwifiex_ds_get_stats stats; |
| |
| if (!p) |
| return -ENOMEM; |
| |
| memset(&stats, 0, sizeof(stats)); |
| ret = mwifiex_get_stats_info(priv, &stats); |
| if (ret) |
| goto free_and_exit; |
| |
| p += sprintf(p, "\n" |
| "mcasttxframe %u\n" |
| "failed %u\n" |
| "retry %u\n" |
| "multiretry %u\n" |
| "framedup %u\n" |
| "rtssuccess %u\n" |
| "rtsfailure %u\n" |
| "ackfailure %u\n" |
| "rxfrag %u\n" |
| "mcastrxframe %u\n" |
| "fcserror %u\n" |
| "txframe %u\n" |
| "wepicverrcnt-1 %u\n" |
| "wepicverrcnt-2 %u\n" |
| "wepicverrcnt-3 %u\n" |
| "wepicverrcnt-4 %u\n" |
| "bcn_rcv_cnt %u\n" |
| "bcn_miss_cnt %u\n", |
| stats.mcast_tx_frame, |
| stats.failed, |
| stats.retry, |
| stats.multi_retry, |
| stats.frame_dup, |
| stats.rts_success, |
| stats.rts_failure, |
| stats.ack_failure, |
| stats.rx_frag, |
| stats.mcast_rx_frame, |
| stats.fcs_error, |
| stats.tx_frame, |
| stats.wep_icv_error[0], |
| stats.wep_icv_error[1], |
| stats.wep_icv_error[2], |
| stats.wep_icv_error[3], |
| stats.bcn_rcv_cnt, |
| stats.bcn_miss_cnt); |
| |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, |
| (unsigned long) p - page); |
| |
| free_and_exit: |
| free_page(page); |
| return ret; |
| } |
| |
| /* Sysfs histogram file read handler. |
| * |
| * This function is called when the 'histogram' file is opened for reading |
| * It prints the following histogram information - |
| * - Number of histogram samples |
| * - Receive packet number of each rx_rate |
| * - Receive packet number of each snr |
| * - Receive packet number of each nosie_flr |
| * - Receive packet number of each signal streath |
| */ |
| static ssize_t |
| mwifiex_histogram_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = |
| (struct mwifiex_private *)file->private_data; |
| ssize_t ret; |
| struct mwifiex_histogram_data *phist_data; |
| int i, value; |
| unsigned long page = get_zeroed_page(GFP_KERNEL); |
| char *p = (char *)page; |
| |
| if (!p) |
| return -ENOMEM; |
| |
| if (!priv || !priv->hist_data) |
| return -EFAULT; |
| phist_data = priv->hist_data; |
| |
| p += sprintf(p, "\n" |
| "total samples = %d\n", |
| atomic_read(&phist_data->num_samples)); |
| |
| p += sprintf(p, "rx rates (in Mbps): 0=1M 1=2M"); |
| p += sprintf(p, "2=5.5M 3=11M 4=6M 5=9M 6=12M\n"); |
| p += sprintf(p, "7=18M 8=24M 9=36M 10=48M 11=54M"); |
| p += sprintf(p, "12-27=MCS0-15(BW20) 28-43=MCS0-15(BW40)\n"); |
| |
| if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) { |
| p += sprintf(p, "44-53=MCS0-9(VHT:BW20)"); |
| p += sprintf(p, "54-63=MCS0-9(VHT:BW40)"); |
| p += sprintf(p, "64-73=MCS0-9(VHT:BW80)\n\n"); |
| } else { |
| p += sprintf(p, "\n"); |
| } |
| |
| for (i = 0; i < MWIFIEX_MAX_RX_RATES; i++) { |
| value = atomic_read(&phist_data->rx_rate[i]); |
| if (value) |
| p += sprintf(p, "rx_rate[%02d] = %d\n", i, value); |
| } |
| |
| if (ISSUPP_11ACENABLED(priv->adapter->fw_cap_info)) { |
| for (i = MWIFIEX_MAX_RX_RATES; i < MWIFIEX_MAX_AC_RX_RATES; |
| i++) { |
| value = atomic_read(&phist_data->rx_rate[i]); |
| if (value) |
| p += sprintf(p, "rx_rate[%02d] = %d\n", |
| i, value); |
| } |
| } |
| |
| for (i = 0; i < MWIFIEX_MAX_SNR; i++) { |
| value = atomic_read(&phist_data->snr[i]); |
| if (value) |
| p += sprintf(p, "snr[%02ddB] = %d\n", i, value); |
| } |
| for (i = 0; i < MWIFIEX_MAX_NOISE_FLR; i++) { |
| value = atomic_read(&phist_data->noise_flr[i]); |
| if (value) |
| p += sprintf(p, "noise_flr[-%02ddBm] = %d\n", |
| (int)(i-128), value); |
| } |
| for (i = 0; i < MWIFIEX_MAX_SIG_STRENGTH; i++) { |
| value = atomic_read(&phist_data->sig_str[i]); |
| if (value) |
| p += sprintf(p, "sig_strength[-%02ddBm] = %d\n", |
| i, value); |
| } |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, (char *)page, |
| (unsigned long)p - page); |
| |
| return ret; |
| } |
| |
| static ssize_t |
| mwifiex_histogram_write(struct file *file, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = (void *)file->private_data; |
| |
| if (priv && priv->hist_data) |
| mwifiex_hist_data_reset(priv); |
| return 0; |
| } |
| |
| static struct mwifiex_debug_info info; |
| |
| /* |
| * Proc debug file read handler. |
| * |
| * This function is called when the 'debug' file is opened for reading |
| * It prints the following log information - |
| * - Interrupt count |
| * - WMM AC VO packets count |
| * - WMM AC VI packets count |
| * - WMM AC BE packets count |
| * - WMM AC BK packets count |
| * - Maximum Tx buffer size |
| * - Tx buffer size |
| * - Current Tx buffer size |
| * - Power Save mode |
| * - Power Save state |
| * - Deep Sleep status |
| * - Device wakeup required status |
| * - Number of wakeup tries |
| * - Host Sleep configured status |
| * - Host Sleep activated status |
| * - Number of Tx timeouts |
| * - Number of command timeouts |
| * - Last timed out command ID |
| * - Last timed out command action |
| * - Last command ID |
| * - Last command action |
| * - Last command index |
| * - Last command response ID |
| * - Last command response index |
| * - Last event |
| * - Last event index |
| * - Number of host to card command failures |
| * - Number of sleep confirm command failures |
| * - Number of host to card data failure |
| * - Number of deauthentication events |
| * - Number of disassociation events |
| * - Number of link lost events |
| * - Number of deauthentication commands |
| * - Number of association success commands |
| * - Number of association failure commands |
| * - Number of commands sent |
| * - Number of data packets sent |
| * - Number of command responses received |
| * - Number of events received |
| * - Tx BA stream table (TID, RA) |
| * - Rx reorder table (TID, TA, Start window, Window size, Buffer) |
| */ |
| static ssize_t |
| mwifiex_debug_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = |
| (struct mwifiex_private *) file->private_data; |
| unsigned long page = get_zeroed_page(GFP_KERNEL); |
| char *p = (char *) page; |
| ssize_t ret; |
| |
| if (!p) |
| return -ENOMEM; |
| |
| ret = mwifiex_get_debug_info(priv, &info); |
| if (ret) |
| goto free_and_exit; |
| |
| p += mwifiex_debug_info_to_buffer(priv, p, &info); |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, (char *) page, |
| (unsigned long) p - page); |
| |
| free_and_exit: |
| free_page(page); |
| return ret; |
| } |
| |
| static u32 saved_reg_type, saved_reg_offset, saved_reg_value; |
| |
| /* |
| * Proc regrdwr file write handler. |
| * |
| * This function is called when the 'regrdwr' file is opened for writing |
| * |
| * This function can be used to write to a register. |
| */ |
| static ssize_t |
| mwifiex_regrdwr_write(struct file *file, |
| const char __user *ubuf, size_t count, loff_t *ppos) |
| { |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (char *) addr; |
| size_t buf_size = min_t(size_t, count, PAGE_SIZE - 1); |
| int ret; |
| u32 reg_type = 0, reg_offset = 0, reg_value = UINT_MAX; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| |
| if (copy_from_user(buf, ubuf, buf_size)) { |
| ret = -EFAULT; |
| goto done; |
| } |
| |
| sscanf(buf, "%u %x %x", ®_type, ®_offset, ®_value); |
| |
| if (reg_type == 0 || reg_offset == 0) { |
| ret = -EINVAL; |
| goto done; |
| } else { |
| saved_reg_type = reg_type; |
| saved_reg_offset = reg_offset; |
| saved_reg_value = reg_value; |
| ret = count; |
| } |
| done: |
| free_page(addr); |
| return ret; |
| } |
| |
| /* |
| * Proc regrdwr file read handler. |
| * |
| * This function is called when the 'regrdwr' file is opened for reading |
| * |
| * This function can be used to read from a register. |
| */ |
| static ssize_t |
| mwifiex_regrdwr_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = |
| (struct mwifiex_private *) file->private_data; |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (char *) addr; |
| int pos = 0, ret = 0; |
| u32 reg_value; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| if (!saved_reg_type) { |
| /* No command has been given */ |
| pos += snprintf(buf, PAGE_SIZE, "0"); |
| goto done; |
| } |
| /* Set command has been given */ |
| if (saved_reg_value != UINT_MAX) { |
| ret = mwifiex_reg_write(priv, saved_reg_type, saved_reg_offset, |
| saved_reg_value); |
| |
| pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", |
| saved_reg_type, saved_reg_offset, |
| saved_reg_value); |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| |
| goto done; |
| } |
| /* Get command has been given */ |
| ret = mwifiex_reg_read(priv, saved_reg_type, |
| saved_reg_offset, ®_value); |
| if (ret) { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| pos += snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", saved_reg_type, |
| saved_reg_offset, reg_value); |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| |
| done: |
| free_page(addr); |
| return ret; |
| } |
| |
| /* Proc debug_mask file read handler. |
| * This function is called when the 'debug_mask' file is opened for reading |
| * This function can be used read driver debugging mask value. |
| */ |
| static ssize_t |
| mwifiex_debug_mask_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = |
| (struct mwifiex_private *)file->private_data; |
| unsigned long page = get_zeroed_page(GFP_KERNEL); |
| char *buf = (char *)page; |
| size_t ret = 0; |
| int pos = 0; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| pos += snprintf(buf, PAGE_SIZE, "debug mask=0x%08x\n", |
| priv->adapter->debug_mask); |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| |
| free_page(page); |
| return ret; |
| } |
| |
| /* Proc debug_mask file read handler. |
| * This function is called when the 'debug_mask' file is opened for reading |
| * This function can be used read driver debugging mask value. |
| */ |
| static ssize_t |
| mwifiex_debug_mask_write(struct file *file, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| int ret; |
| unsigned long debug_mask; |
| struct mwifiex_private *priv = (void *)file->private_data; |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (void *)addr; |
| size_t buf_size = min(count, (size_t)(PAGE_SIZE - 1)); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| if (copy_from_user(buf, ubuf, buf_size)) { |
| ret = -EFAULT; |
| goto done; |
| } |
| |
| if (kstrtoul(buf, 0, &debug_mask)) { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| priv->adapter->debug_mask = debug_mask; |
| ret = count; |
| done: |
| free_page(addr); |
| return ret; |
| } |
| |
| /* Proc memrw file write handler. |
| * This function is called when the 'memrw' file is opened for writing |
| * This function can be used to write to a memory location. |
| */ |
| static ssize_t |
| mwifiex_memrw_write(struct file *file, const char __user *ubuf, size_t count, |
| loff_t *ppos) |
| { |
| int ret; |
| char cmd; |
| struct mwifiex_ds_mem_rw mem_rw; |
| u16 cmd_action; |
| struct mwifiex_private *priv = (void *)file->private_data; |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (void *)addr; |
| size_t buf_size = min(count, (size_t)(PAGE_SIZE - 1)); |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| if (copy_from_user(buf, ubuf, buf_size)) { |
| ret = -EFAULT; |
| goto done; |
| } |
| |
| ret = sscanf(buf, "%c %x %x", &cmd, &mem_rw.addr, &mem_rw.value); |
| if (ret != 3) { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if ((cmd == 'r') || (cmd == 'R')) { |
| cmd_action = HostCmd_ACT_GEN_GET; |
| mem_rw.value = 0; |
| } else if ((cmd == 'w') || (cmd == 'W')) { |
| cmd_action = HostCmd_ACT_GEN_SET; |
| } else { |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| memcpy(&priv->mem_rw, &mem_rw, sizeof(mem_rw)); |
| if (mwifiex_send_cmd(priv, HostCmd_CMD_MEM_ACCESS, cmd_action, 0, |
| &mem_rw, true)) |
| ret = -1; |
| else |
| ret = count; |
| |
| done: |
| free_page(addr); |
| return ret; |
| } |
| |
| /* Proc memrw file read handler. |
| * This function is called when the 'memrw' file is opened for reading |
| * This function can be used to read from a memory location. |
| */ |
| static ssize_t |
| mwifiex_memrw_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = (void *)file->private_data; |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (char *)addr; |
| int ret, pos = 0; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| pos += snprintf(buf, PAGE_SIZE, "0x%x 0x%x\n", priv->mem_rw.addr, |
| priv->mem_rw.value); |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| |
| free_page(addr); |
| return ret; |
| } |
| |
| static u32 saved_offset = -1, saved_bytes = -1; |
| |
| /* |
| * Proc rdeeprom file write handler. |
| * |
| * This function is called when the 'rdeeprom' file is opened for writing |
| * |
| * This function can be used to write to a RDEEPROM location. |
| */ |
| static ssize_t |
| mwifiex_rdeeprom_write(struct file *file, |
| const char __user *ubuf, size_t count, loff_t *ppos) |
| { |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (char *) addr; |
| size_t buf_size = min_t(size_t, count, PAGE_SIZE - 1); |
| int ret = 0; |
| int offset = -1, bytes = -1; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| |
| if (copy_from_user(buf, ubuf, buf_size)) { |
| ret = -EFAULT; |
| goto done; |
| } |
| |
| sscanf(buf, "%d %d", &offset, &bytes); |
| |
| if (offset == -1 || bytes == -1) { |
| ret = -EINVAL; |
| goto done; |
| } else { |
| saved_offset = offset; |
| saved_bytes = bytes; |
| ret = count; |
| } |
| done: |
| free_page(addr); |
| return ret; |
| } |
| |
| /* |
| * Proc rdeeprom read write handler. |
| * |
| * This function is called when the 'rdeeprom' file is opened for reading |
| * |
| * This function can be used to read from a RDEEPROM location. |
| */ |
| static ssize_t |
| mwifiex_rdeeprom_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = |
| (struct mwifiex_private *) file->private_data; |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (char *) addr; |
| int pos, ret, i; |
| u8 value[MAX_EEPROM_DATA]; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| if (saved_offset == -1) { |
| /* No command has been given */ |
| pos = snprintf(buf, PAGE_SIZE, "0"); |
| goto done; |
| } |
| |
| /* Get command has been given */ |
| ret = mwifiex_eeprom_read(priv, (u16) saved_offset, |
| (u16) saved_bytes, value); |
| if (ret) { |
| ret = -EINVAL; |
| goto out_free; |
| } |
| |
| pos = snprintf(buf, PAGE_SIZE, "%d %d ", saved_offset, saved_bytes); |
| |
| for (i = 0; i < saved_bytes; i++) |
| pos += scnprintf(buf + pos, PAGE_SIZE - pos, "%d ", value[i]); |
| |
| done: |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| out_free: |
| free_page(addr); |
| return ret; |
| } |
| |
| /* Proc hscfg file write handler |
| * This function can be used to configure the host sleep parameters. |
| */ |
| static ssize_t |
| mwifiex_hscfg_write(struct file *file, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = (void *)file->private_data; |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (char *)addr; |
| size_t buf_size = min_t(size_t, count, PAGE_SIZE - 1); |
| int ret, arg_num; |
| struct mwifiex_ds_hs_cfg hscfg; |
| int conditions = HS_CFG_COND_DEF; |
| u32 gpio = HS_CFG_GPIO_DEF, gap = HS_CFG_GAP_DEF; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| if (copy_from_user(buf, ubuf, buf_size)) { |
| ret = -EFAULT; |
| goto done; |
| } |
| |
| arg_num = sscanf(buf, "%d %x %x", &conditions, &gpio, &gap); |
| |
| memset(&hscfg, 0, sizeof(struct mwifiex_ds_hs_cfg)); |
| |
| if (arg_num > 3) { |
| mwifiex_dbg(priv->adapter, ERROR, |
| "Too many arguments\n"); |
| ret = -EINVAL; |
| goto done; |
| } |
| |
| if (arg_num >= 1 && arg_num < 3) |
| mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET, |
| MWIFIEX_SYNC_CMD, &hscfg); |
| |
| if (arg_num) { |
| if (conditions == HS_CFG_CANCEL) { |
| mwifiex_cancel_hs(priv, MWIFIEX_ASYNC_CMD); |
| ret = count; |
| goto done; |
| } |
| hscfg.conditions = conditions; |
| } |
| if (arg_num >= 2) |
| hscfg.gpio = gpio; |
| if (arg_num == 3) |
| hscfg.gap = gap; |
| |
| hscfg.is_invoke_hostcmd = false; |
| mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET, |
| MWIFIEX_SYNC_CMD, &hscfg); |
| |
| mwifiex_enable_hs(priv->adapter); |
| priv->adapter->hs_enabling = false; |
| ret = count; |
| done: |
| free_page(addr); |
| return ret; |
| } |
| |
| /* Proc hscfg file read handler |
| * This function can be used to read host sleep configuration |
| * parameters from driver. |
| */ |
| static ssize_t |
| mwifiex_hscfg_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = (void *)file->private_data; |
| unsigned long addr = get_zeroed_page(GFP_KERNEL); |
| char *buf = (char *)addr; |
| int pos, ret; |
| struct mwifiex_ds_hs_cfg hscfg; |
| |
| if (!buf) |
| return -ENOMEM; |
| |
| mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET, |
| MWIFIEX_SYNC_CMD, &hscfg); |
| |
| pos = snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", hscfg.conditions, |
| hscfg.gpio, hscfg.gap); |
| |
| ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos); |
| |
| free_page(addr); |
| return ret; |
| } |
| |
| static ssize_t |
| mwifiex_timeshare_coex_read(struct file *file, char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| struct mwifiex_private *priv = file->private_data; |
| char buf[3]; |
| bool timeshare_coex; |
| int ret; |
| unsigned int len; |
| |
| if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15) |
| return -EOPNOTSUPP; |
| |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX, |
| HostCmd_ACT_GEN_GET, 0, ×hare_coex, true); |
| if (ret) |
| return ret; |
| |
| len = sprintf(buf, "%d\n", timeshare_coex); |
| return simple_read_from_buffer(ubuf, count, ppos, buf, len); |
| } |
| |
| static ssize_t |
| mwifiex_timeshare_coex_write(struct file *file, const char __user *ubuf, |
| size_t count, loff_t *ppos) |
| { |
| bool timeshare_coex; |
| struct mwifiex_private *priv = file->private_data; |
| char kbuf[16]; |
| int ret; |
| |
| if (priv->adapter->fw_api_ver != MWIFIEX_FW_V15) |
| return -EOPNOTSUPP; |
| |
| memset(kbuf, 0, sizeof(kbuf)); |
| |
| if (copy_from_user(&kbuf, ubuf, min_t(size_t, sizeof(kbuf) - 1, count))) |
| return -EFAULT; |
| |
| if (strtobool(kbuf, ×hare_coex)) |
| return -EINVAL; |
| |
| ret = mwifiex_send_cmd(priv, HostCmd_CMD_ROBUST_COEX, |
| HostCmd_ACT_GEN_SET, 0, ×hare_coex, true); |
| if (ret) |
| return ret; |
| else |
| return count; |
| } |
| |
| #define MWIFIEX_DFS_ADD_FILE(name) do { \ |
| if (!debugfs_create_file(#name, 0644, priv->dfs_dev_dir, \ |
| priv, &mwifiex_dfs_##name##_fops)) \ |
| return; \ |
| } while (0); |
| |
| #define MWIFIEX_DFS_FILE_OPS(name) \ |
| static const struct file_operations mwifiex_dfs_##name##_fops = { \ |
| .read = mwifiex_##name##_read, \ |
| .write = mwifiex_##name##_write, \ |
| .open = simple_open, \ |
| }; |
| |
| #define MWIFIEX_DFS_FILE_READ_OPS(name) \ |
| static const struct file_operations mwifiex_dfs_##name##_fops = { \ |
| .read = mwifiex_##name##_read, \ |
| .open = simple_open, \ |
| }; |
| |
| #define MWIFIEX_DFS_FILE_WRITE_OPS(name) \ |
| static const struct file_operations mwifiex_dfs_##name##_fops = { \ |
| .write = mwifiex_##name##_write, \ |
| .open = simple_open, \ |
| }; |
| |
| |
| MWIFIEX_DFS_FILE_READ_OPS(info); |
| MWIFIEX_DFS_FILE_READ_OPS(debug); |
| MWIFIEX_DFS_FILE_READ_OPS(getlog); |
| MWIFIEX_DFS_FILE_READ_OPS(device_dump); |
| MWIFIEX_DFS_FILE_OPS(regrdwr); |
| MWIFIEX_DFS_FILE_OPS(rdeeprom); |
| MWIFIEX_DFS_FILE_OPS(memrw); |
| MWIFIEX_DFS_FILE_OPS(hscfg); |
| MWIFIEX_DFS_FILE_OPS(histogram); |
| MWIFIEX_DFS_FILE_OPS(debug_mask); |
| MWIFIEX_DFS_FILE_OPS(timeshare_coex); |
| |
| /* |
| * This function creates the debug FS directory structure and the files. |
| */ |
| void |
| mwifiex_dev_debugfs_init(struct mwifiex_private *priv) |
| { |
| if (!mwifiex_dfs_dir || !priv) |
| return; |
| |
| priv->dfs_dev_dir = debugfs_create_dir(priv->netdev->name, |
| mwifiex_dfs_dir); |
| |
| if (!priv->dfs_dev_dir) |
| return; |
| |
| MWIFIEX_DFS_ADD_FILE(info); |
| MWIFIEX_DFS_ADD_FILE(debug); |
| MWIFIEX_DFS_ADD_FILE(getlog); |
| MWIFIEX_DFS_ADD_FILE(regrdwr); |
| MWIFIEX_DFS_ADD_FILE(rdeeprom); |
| MWIFIEX_DFS_ADD_FILE(device_dump); |
| MWIFIEX_DFS_ADD_FILE(memrw); |
| MWIFIEX_DFS_ADD_FILE(hscfg); |
| MWIFIEX_DFS_ADD_FILE(histogram); |
| MWIFIEX_DFS_ADD_FILE(debug_mask); |
| MWIFIEX_DFS_ADD_FILE(timeshare_coex); |
| } |
| |
| /* |
| * This function removes the debug FS directory structure and the files. |
| */ |
| void |
| mwifiex_dev_debugfs_remove(struct mwifiex_private *priv) |
| { |
| if (!priv) |
| return; |
| |
| debugfs_remove_recursive(priv->dfs_dev_dir); |
| } |
| |
| /* |
| * This function creates the top level proc directory. |
| */ |
| void |
| mwifiex_debugfs_init(void) |
| { |
| if (!mwifiex_dfs_dir) |
| mwifiex_dfs_dir = debugfs_create_dir("mwifiex", NULL); |
| } |
| |
| /* |
| * This function removes the top level proc directory. |
| */ |
| void |
| mwifiex_debugfs_remove(void) |
| { |
| if (mwifiex_dfs_dir) |
| debugfs_remove(mwifiex_dfs_dir); |
| } |