blob: a22d30a4def1e0406512608d22aec7eaefd67561 [file] [log] [blame]
/*
* printer.c -- Printer gadget driver
*
* Copyright (C) 2003-2005 David Brownell
* Copyright (C) 2006 Craig W. Nadler
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <asm/byteorder.h>
#include <linux/usb/ch9.h>
#include <linux/usb/composite.h>
#include <linux/usb/gadget.h>
#include <linux/usb/g_printer.h>
USB_GADGET_COMPOSITE_OPTIONS();
#define DRIVER_DESC "Printer Gadget"
#define DRIVER_VERSION "2015 FEB 17"
static const char shortname [] = "printer";
static const char driver_desc [] = DRIVER_DESC;
#include "u_printer.h"
/*-------------------------------------------------------------------------*/
/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
* Instead: allocate your own, using normal USB-IF procedures.
*/
/* Thanks to NetChip Technologies for donating this product ID.
*/
#define PRINTER_VENDOR_NUM 0x0525 /* NetChip */
#define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */
/* Some systems will want different product identifiers published in the
* device descriptor, either numbers or strings or both. These string
* parameters are in UTF-8 (superset of ASCII's 7 bit characters).
*/
module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO);
MODULE_PARM_DESC(iSerialNum, "1");
static char *iPNPstring;
module_param(iPNPstring, charp, S_IRUGO);
MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
/* Number of requests to allocate per endpoint, not used for ep0. */
static unsigned qlen = 10;
module_param(qlen, uint, S_IRUGO|S_IWUSR);
#define QLEN qlen
static struct usb_function_instance *fi_printer;
static struct usb_function *f_printer;
/*-------------------------------------------------------------------------*/
/*
* DESCRIPTORS ... most are static, but strings and (full) configuration
* descriptors are built on demand.
*/
static struct usb_device_descriptor device_desc = {
.bLength = sizeof device_desc,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = cpu_to_le16(0x0200),
.bDeviceClass = USB_CLASS_PER_INTERFACE,
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.idVendor = cpu_to_le16(PRINTER_VENDOR_NUM),
.idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM),
.bNumConfigurations = 1
};
static const struct usb_descriptor_header *otg_desc[2];
/*-------------------------------------------------------------------------*/
/* descriptors that are built on-demand */
static char product_desc [40] = DRIVER_DESC;
static char serial_num [40] = "1";
static char pnp_string[PNP_STRING_LEN] =
"XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
/* static strings, in UTF-8 */
static struct usb_string strings [] = {
[USB_GADGET_MANUFACTURER_IDX].s = "",
[USB_GADGET_PRODUCT_IDX].s = product_desc,
[USB_GADGET_SERIAL_IDX].s = serial_num,
{ } /* end of list */
};
static struct usb_gadget_strings stringtab_dev = {
.language = 0x0409, /* en-us */
.strings = strings,
};
static struct usb_gadget_strings *dev_strings[] = {
&stringtab_dev,
NULL,
};
static struct usb_configuration printer_cfg_driver = {
.label = "printer",
.bConfigurationValue = 1,
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
};
static int printer_do_config(struct usb_configuration *c)
{
struct usb_gadget *gadget = c->cdev->gadget;
int status = 0;
usb_ep_autoconfig_reset(gadget);
usb_gadget_set_selfpowered(gadget);
if (gadget_is_otg(gadget)) {
printer_cfg_driver.descriptors = otg_desc;
printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
f_printer = usb_get_function(fi_printer);
if (IS_ERR(f_printer))
return PTR_ERR(f_printer);
status = usb_add_function(c, f_printer);
if (status < 0)
usb_put_function(f_printer);
return status;
}
static int printer_bind(struct usb_composite_dev *cdev)
{
struct f_printer_opts *opts;
int ret, len;
fi_printer = usb_get_function_instance("printer");
if (IS_ERR(fi_printer))
return PTR_ERR(fi_printer);
if (iPNPstring)
strlcpy(&pnp_string[2], iPNPstring, PNP_STRING_LEN - 2);
len = strlen(pnp_string);
pnp_string[0] = (len >> 8) & 0xFF;
pnp_string[1] = len & 0xFF;
opts = container_of(fi_printer, struct f_printer_opts, func_inst);
opts->minor = 0;
memcpy(opts->pnp_string, pnp_string, PNP_STRING_LEN);
opts->q_len = QLEN;
ret = usb_string_ids_tab(cdev, strings);
if (ret < 0)
goto fail_put_func_inst;
device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
if (gadget_is_otg(cdev->gadget) && !otg_desc[0]) {
struct usb_descriptor_header *usb_desc;
usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
if (!usb_desc) {
ret = -ENOMEM;
goto fail_put_func_inst;
}
usb_otg_descriptor_init(cdev->gadget, usb_desc);
otg_desc[0] = usb_desc;
otg_desc[1] = NULL;
}
ret = usb_add_config(cdev, &printer_cfg_driver, printer_do_config);
if (ret)
goto fail_free_otg_desc;
usb_composite_overwrite_options(cdev, &coverwrite);
return ret;
fail_free_otg_desc:
kfree(otg_desc[0]);
otg_desc[0] = NULL;
fail_put_func_inst:
usb_put_function_instance(fi_printer);
return ret;
}
static int printer_unbind(struct usb_composite_dev *cdev)
{
usb_put_function(f_printer);
usb_put_function_instance(fi_printer);
kfree(otg_desc[0]);
otg_desc[0] = NULL;
return 0;
}
static struct usb_composite_driver printer_driver = {
.name = shortname,
.dev = &device_desc,
.strings = dev_strings,
.max_speed = USB_SPEED_SUPER,
.bind = printer_bind,
.unbind = printer_unbind,
};
module_usb_composite_driver(printer_driver);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Craig Nadler");
MODULE_LICENSE("GPL");