blob: 2d020a3ec0b5bb0c2ea13dc0f568f123d77af94a [file] [log] [blame]
/*
* drivers/net/phy/at803x.c
*
* Driver for Atheros 803x PHY
*
* Author: Matus Ujhelyi <ujhelyi.m@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/phy.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
#define AT803X_INTR_ENABLE 0x12
#define AT803X_INTR_STATUS 0x13
#define AT803X_SMART_SPEED 0x14
#define AT803X_LED_CONTROL 0x18
#define AT803X_WOL_ENABLE 0x01
#define AT803X_DEVICE_ADDR 0x03
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
#define AT803X_MMD_ACCESS_CONTROL 0x0D
#define AT803X_MMD_ACCESS_CONTROL_DATA 0x0E
#define AT803X_FUNC_DATA 0x4003
#define AT803X_INER 0x0012
#define AT803X_INER_INIT 0xec00
#define AT803X_INSR 0x0013
#define AT803X_DEBUG_ADDR 0x1D
#define AT803X_DEBUG_DATA 0x1E
#define AT803X_DEBUG_SYSTEM_MODE_CTRL 0x05
#define AT803X_DEBUG_RGMII_TX_CLK_DLY BIT(8)
#define ATH8030_PHY_ID 0x004dd076
#define ATH8031_PHY_ID 0x004dd074
#define ATH8035_PHY_ID 0x004dd072
MODULE_DESCRIPTION("Atheros 803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");
struct at803x_priv {
bool phy_reset:1;
struct gpio_desc *gpiod_reset;
};
struct at803x_context {
u16 bmcr;
u16 advertise;
u16 control1000;
u16 int_enable;
u16 smart_speed;
u16 led_control;
};
/* save relevant PHY registers to private copy */
static void at803x_context_save(struct phy_device *phydev,
struct at803x_context *context)
{
context->bmcr = phy_read(phydev, MII_BMCR);
context->advertise = phy_read(phydev, MII_ADVERTISE);
context->control1000 = phy_read(phydev, MII_CTRL1000);
context->int_enable = phy_read(phydev, AT803X_INTR_ENABLE);
context->smart_speed = phy_read(phydev, AT803X_SMART_SPEED);
context->led_control = phy_read(phydev, AT803X_LED_CONTROL);
}
/* restore relevant PHY registers from private copy */
static void at803x_context_restore(struct phy_device *phydev,
const struct at803x_context *context)
{
phy_write(phydev, MII_BMCR, context->bmcr);
phy_write(phydev, MII_ADVERTISE, context->advertise);
phy_write(phydev, MII_CTRL1000, context->control1000);
phy_write(phydev, AT803X_INTR_ENABLE, context->int_enable);
phy_write(phydev, AT803X_SMART_SPEED, context->smart_speed);
phy_write(phydev, AT803X_LED_CONTROL, context->led_control);
}
static int at803x_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
struct net_device *ndev = phydev->attached_dev;
const u8 *mac;
int ret;
u32 value;
unsigned int i, offsets[] = {
AT803X_LOC_MAC_ADDR_32_47_OFFSET,
AT803X_LOC_MAC_ADDR_16_31_OFFSET,
AT803X_LOC_MAC_ADDR_0_15_OFFSET,
};
if (!ndev)
return -ENODEV;
if (wol->wolopts & WAKE_MAGIC) {
mac = (const u8 *) ndev->dev_addr;
if (!is_valid_ether_addr(mac))
return -EFAULT;
for (i = 0; i < 3; i++) {
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
AT803X_DEVICE_ADDR);
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
offsets[i]);
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL,
AT803X_FUNC_DATA);
phy_write(phydev, AT803X_MMD_ACCESS_CONTROL_DATA,
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));
}
value = phy_read(phydev, AT803X_INTR_ENABLE);
value |= AT803X_WOL_ENABLE;
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
if (ret)
return ret;
value = phy_read(phydev, AT803X_INTR_STATUS);
} else {
value = phy_read(phydev, AT803X_INTR_ENABLE);
value &= (~AT803X_WOL_ENABLE);
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
if (ret)
return ret;
value = phy_read(phydev, AT803X_INTR_STATUS);
}
return ret;
}
static void at803x_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
u32 value;
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
value = phy_read(phydev, AT803X_INTR_ENABLE);
if (value & AT803X_WOL_ENABLE)
wol->wolopts |= WAKE_MAGIC;
}
static int at803x_suspend(struct phy_device *phydev)
{
int value;
int wol_enabled;
mutex_lock(&phydev->lock);
value = phy_read(phydev, AT803X_INTR_ENABLE);
wol_enabled = value & AT803X_WOL_ENABLE;
value = phy_read(phydev, MII_BMCR);
if (wol_enabled)
value |= BMCR_ISOLATE;
else
value |= BMCR_PDOWN;
phy_write(phydev, MII_BMCR, value);
mutex_unlock(&phydev->lock);
return 0;
}
static int at803x_resume(struct phy_device *phydev)
{
int value;
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
phy_write(phydev, MII_BMCR, value);
mutex_unlock(&phydev->lock);
return 0;
}
static int at803x_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->dev;
struct at803x_priv *priv;
struct gpio_desc *gpiod_reset;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gpiod_reset))
return PTR_ERR(gpiod_reset);
priv->gpiod_reset = gpiod_reset;
phydev->priv = priv;
return 0;
}
static int at803x_config_init(struct phy_device *phydev)
{
int ret;
ret = genphy_config_init(phydev);
if (ret < 0)
return ret;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
ret = phy_write(phydev, AT803X_DEBUG_ADDR,
AT803X_DEBUG_SYSTEM_MODE_CTRL);
if (ret)
return ret;
ret = phy_write(phydev, AT803X_DEBUG_DATA,
AT803X_DEBUG_RGMII_TX_CLK_DLY);
if (ret)
return ret;
}
return 0;
}
static int at803x_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, AT803X_INSR);
return (err < 0) ? err : 0;
}
static int at803x_config_intr(struct phy_device *phydev)
{
int err;
int value;
value = phy_read(phydev, AT803X_INER);
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, AT803X_INER,
value | AT803X_INER_INIT);
else
err = phy_write(phydev, AT803X_INER, 0);
return err;
}
static void at803x_link_change_notify(struct phy_device *phydev)
{
struct at803x_priv *priv = phydev->priv;
/*
* Conduct a hardware reset for AT8030 every time a link loss is
* signalled. This is necessary to circumvent a hardware bug that
* occurs when the cable is unplugged while TX packets are pending
* in the FIFO. In such cases, the FIFO enters an error mode it
* cannot recover from by software.
*/
if (phydev->drv->phy_id == ATH8030_PHY_ID) {
if (phydev->state == PHY_NOLINK) {
if (priv->gpiod_reset && !priv->phy_reset) {
struct at803x_context context;
at803x_context_save(phydev, &context);
gpiod_set_value(priv->gpiod_reset, 0);
msleep(1);
gpiod_set_value(priv->gpiod_reset, 1);
msleep(1);
at803x_context_restore(phydev, &context);
dev_dbg(&phydev->dev, "%s(): phy was reset\n",
__func__);
priv->phy_reset = true;
}
} else {
priv->phy_reset = false;
}
}
}
static struct phy_driver at803x_driver[] = {
{
/* ATHEROS 8035 */
.phy_id = ATH8035_PHY_ID,
.name = "Atheros 8035 ethernet",
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
.driver = {
.owner = THIS_MODULE,
},
}, {
/* ATHEROS 8030 */
.phy_id = ATH8030_PHY_ID,
.name = "Atheros 8030 ethernet",
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = at803x_ack_interrupt,
.config_intr = at803x_config_intr,
.driver = {
.owner = THIS_MODULE,
},
}, {
/* ATHEROS 8031 */
.phy_id = ATH8031_PHY_ID,
.name = "Atheros 8031 ethernet",
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
.link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = &at803x_ack_interrupt,
.config_intr = &at803x_config_intr,
.driver = {
.owner = THIS_MODULE,
},
} };
module_phy_driver(at803x_driver);
static struct mdio_device_id __maybe_unused atheros_tbl[] = {
{ ATH8030_PHY_ID, 0xffffffef },
{ ATH8031_PHY_ID, 0xffffffef },
{ ATH8035_PHY_ID, 0xffffffef },
{ }
};
MODULE_DEVICE_TABLE(mdio, atheros_tbl);