| /* |
| * rcar_du_kms.c -- R-Car Display Unit Mode Setting |
| * |
| * Copyright (C) 2013-2014 Renesas Electronics Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_crtc_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| #include <drm/drm_gem_cma_helper.h> |
| |
| #include <linux/of_graph.h> |
| #include <linux/wait.h> |
| |
| #include "rcar_du_crtc.h" |
| #include "rcar_du_drv.h" |
| #include "rcar_du_encoder.h" |
| #include "rcar_du_kms.h" |
| #include "rcar_du_lvdsenc.h" |
| #include "rcar_du_regs.h" |
| |
| /* ----------------------------------------------------------------------------- |
| * Format helpers |
| */ |
| |
| static const struct rcar_du_format_info rcar_du_format_infos[] = { |
| { |
| .fourcc = DRM_FORMAT_RGB565, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_TP | PnMR_DDDF_16BPP, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_ARGB1555, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_ALP | PnMR_DDDF_ARGB, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_XRGB1555, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_ALP | PnMR_DDDF_ARGB, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_XRGB8888, |
| .bpp = 32, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_TP | PnMR_DDDF_16BPP, |
| .edf = PnDDCR4_EDF_RGB888, |
| }, { |
| .fourcc = DRM_FORMAT_ARGB8888, |
| .bpp = 32, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_ALP | PnMR_DDDF_16BPP, |
| .edf = PnDDCR4_EDF_ARGB8888, |
| }, { |
| .fourcc = DRM_FORMAT_UYVY, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_YUYV, |
| .bpp = 16, |
| .planes = 1, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_NV12, |
| .bpp = 12, |
| .planes = 2, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| .fourcc = DRM_FORMAT_NV21, |
| .bpp = 12, |
| .planes = 2, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, { |
| /* In YUV 4:2:2, only NV16 is supported (NV61 isn't) */ |
| .fourcc = DRM_FORMAT_NV16, |
| .bpp = 16, |
| .planes = 2, |
| .pnmr = PnMR_SPIM_TP_OFF | PnMR_DDDF_YC, |
| .edf = PnDDCR4_EDF_NONE, |
| }, |
| }; |
| |
| const struct rcar_du_format_info *rcar_du_format_info(u32 fourcc) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(rcar_du_format_infos); ++i) { |
| if (rcar_du_format_infos[i].fourcc == fourcc) |
| return &rcar_du_format_infos[i]; |
| } |
| |
| return NULL; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Frame buffer |
| */ |
| |
| int rcar_du_dumb_create(struct drm_file *file, struct drm_device *dev, |
| struct drm_mode_create_dumb *args) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8); |
| unsigned int align; |
| |
| /* The R8A7779 DU requires a 16 pixels pitch alignment as documented, |
| * but the R8A7790 DU seems to require a 128 bytes pitch alignment. |
| */ |
| if (rcar_du_needs(rcdu, RCAR_DU_QUIRK_ALIGN_128B)) |
| align = 128; |
| else |
| align = 16 * args->bpp / 8; |
| |
| args->pitch = roundup(min_pitch, align); |
| |
| return drm_gem_cma_dumb_create_internal(file, dev, args); |
| } |
| |
| static struct drm_framebuffer * |
| rcar_du_fb_create(struct drm_device *dev, struct drm_file *file_priv, |
| struct drm_mode_fb_cmd2 *mode_cmd) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| const struct rcar_du_format_info *format; |
| unsigned int max_pitch; |
| unsigned int align; |
| unsigned int bpp; |
| |
| format = rcar_du_format_info(mode_cmd->pixel_format); |
| if (format == NULL) { |
| dev_dbg(dev->dev, "unsupported pixel format %08x\n", |
| mode_cmd->pixel_format); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| /* |
| * The pitch and alignment constraints are expressed in pixels on the |
| * hardware side and in bytes in the DRM API. |
| */ |
| bpp = format->planes == 2 ? 1 : format->bpp / 8; |
| max_pitch = 4096 * bpp; |
| |
| if (rcar_du_needs(rcdu, RCAR_DU_QUIRK_ALIGN_128B)) |
| align = 128; |
| else |
| align = 16 * bpp; |
| |
| if (mode_cmd->pitches[0] & (align - 1) || |
| mode_cmd->pitches[0] >= max_pitch) { |
| dev_dbg(dev->dev, "invalid pitch value %u\n", |
| mode_cmd->pitches[0]); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (format->planes == 2) { |
| if (mode_cmd->pitches[1] != mode_cmd->pitches[0]) { |
| dev_dbg(dev->dev, |
| "luma and chroma pitches do not match\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| } |
| |
| return drm_fb_cma_create(dev, file_priv, mode_cmd); |
| } |
| |
| static void rcar_du_output_poll_changed(struct drm_device *dev) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| |
| drm_fbdev_cma_hotplug_event(rcdu->fbdev); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Atomic Check and Update |
| */ |
| |
| /* |
| * Atomic hardware plane allocator |
| * |
| * The hardware plane allocator is solely based on the atomic plane states |
| * without keeping any external state to avoid races between .atomic_check() |
| * and .atomic_commit(). |
| * |
| * The core idea is to avoid using a free planes bitmask that would need to be |
| * shared between check and commit handlers with a collective knowledge based on |
| * the allocated hardware plane(s) for each KMS plane. The allocator then loops |
| * over all plane states to compute the free planes bitmask, allocates hardware |
| * planes based on that bitmask, and stores the result back in the plane states. |
| * |
| * For this to work we need to access the current state of planes not touched by |
| * the atomic update. To ensure that it won't be modified, we need to lock all |
| * planes using drm_atomic_get_plane_state(). This effectively serializes atomic |
| * updates from .atomic_check() up to completion (when swapping the states if |
| * the check step has succeeded) or rollback (when freeing the states if the |
| * check step has failed). |
| * |
| * Allocation is performed in the .atomic_check() handler and applied |
| * automatically when the core swaps the old and new states. |
| */ |
| |
| static bool rcar_du_plane_needs_realloc(struct rcar_du_plane *plane, |
| struct rcar_du_plane_state *state) |
| { |
| const struct rcar_du_format_info *cur_format; |
| |
| cur_format = to_rcar_plane_state(plane->plane.state)->format; |
| |
| /* Lowering the number of planes doesn't strictly require reallocation |
| * as the extra hardware plane will be freed when committing, but doing |
| * so could lead to more fragmentation. |
| */ |
| return !cur_format || cur_format->planes != state->format->planes; |
| } |
| |
| static unsigned int rcar_du_plane_hwmask(struct rcar_du_plane_state *state) |
| { |
| unsigned int mask; |
| |
| if (state->hwindex == -1) |
| return 0; |
| |
| mask = 1 << state->hwindex; |
| if (state->format->planes == 2) |
| mask |= 1 << ((state->hwindex + 1) % 8); |
| |
| return mask; |
| } |
| |
| static int rcar_du_plane_hwalloc(unsigned int num_planes, unsigned int free) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < RCAR_DU_NUM_HW_PLANES; ++i) { |
| if (!(free & (1 << i))) |
| continue; |
| |
| if (num_planes == 1 || free & (1 << ((i + 1) % 8))) |
| break; |
| } |
| |
| return i == RCAR_DU_NUM_HW_PLANES ? -EBUSY : i; |
| } |
| |
| static int rcar_du_atomic_check(struct drm_device *dev, |
| struct drm_atomic_state *state) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| unsigned int group_freed_planes[RCAR_DU_MAX_GROUPS] = { 0, }; |
| unsigned int group_free_planes[RCAR_DU_MAX_GROUPS] = { 0, }; |
| bool needs_realloc = false; |
| unsigned int groups = 0; |
| unsigned int i; |
| int ret; |
| |
| ret = drm_atomic_helper_check(dev, state); |
| if (ret < 0) |
| return ret; |
| |
| /* Check if hardware planes need to be reallocated. */ |
| for (i = 0; i < dev->mode_config.num_total_plane; ++i) { |
| struct rcar_du_plane_state *plane_state; |
| struct rcar_du_plane *plane; |
| unsigned int index; |
| |
| if (!state->planes[i]) |
| continue; |
| |
| plane = to_rcar_plane(state->planes[i]); |
| plane_state = to_rcar_plane_state(state->plane_states[i]); |
| |
| dev_dbg(rcdu->dev, "%s: checking plane (%u,%u)\n", __func__, |
| plane->group->index, plane - plane->group->planes); |
| |
| /* If the plane is being disabled we don't need to go through |
| * the full reallocation procedure. Just mark the hardware |
| * plane(s) as freed. |
| */ |
| if (!plane_state->format) { |
| dev_dbg(rcdu->dev, "%s: plane is being disabled\n", |
| __func__); |
| index = plane - plane->group->planes; |
| group_freed_planes[plane->group->index] |= 1 << index; |
| plane_state->hwindex = -1; |
| continue; |
| } |
| |
| /* If the plane needs to be reallocated mark it as such, and |
| * mark the hardware plane(s) as free. |
| */ |
| if (rcar_du_plane_needs_realloc(plane, plane_state)) { |
| dev_dbg(rcdu->dev, "%s: plane needs reallocation\n", |
| __func__); |
| groups |= 1 << plane->group->index; |
| needs_realloc = true; |
| |
| index = plane - plane->group->planes; |
| group_freed_planes[plane->group->index] |= 1 << index; |
| plane_state->hwindex = -1; |
| } |
| } |
| |
| if (!needs_realloc) |
| return 0; |
| |
| /* Grab all plane states for the groups that need reallocation to ensure |
| * locking and avoid racy updates. This serializes the update operation, |
| * but there's not much we can do about it as that's the hardware |
| * design. |
| * |
| * Compute the used planes mask for each group at the same time to avoid |
| * looping over the planes separately later. |
| */ |
| while (groups) { |
| unsigned int index = ffs(groups) - 1; |
| struct rcar_du_group *group = &rcdu->groups[index]; |
| unsigned int used_planes = 0; |
| |
| dev_dbg(rcdu->dev, "%s: finding free planes for group %u\n", |
| __func__, index); |
| |
| for (i = 0; i < group->num_planes; ++i) { |
| struct rcar_du_plane *plane = &group->planes[i]; |
| struct rcar_du_plane_state *plane_state; |
| struct drm_plane_state *s; |
| |
| s = drm_atomic_get_plane_state(state, &plane->plane); |
| if (IS_ERR(s)) |
| return PTR_ERR(s); |
| |
| /* If the plane has been freed in the above loop its |
| * hardware planes must not be added to the used planes |
| * bitmask. However, the current state doesn't reflect |
| * the free state yet, as we've modified the new state |
| * above. Use the local freed planes list to check for |
| * that condition instead. |
| */ |
| if (group_freed_planes[index] & (1 << i)) { |
| dev_dbg(rcdu->dev, |
| "%s: plane (%u,%u) has been freed, skipping\n", |
| __func__, plane->group->index, |
| plane - plane->group->planes); |
| continue; |
| } |
| |
| plane_state = to_rcar_plane_state(plane->plane.state); |
| used_planes |= rcar_du_plane_hwmask(plane_state); |
| |
| dev_dbg(rcdu->dev, |
| "%s: plane (%u,%u) uses %u hwplanes (index %d)\n", |
| __func__, plane->group->index, |
| plane - plane->group->planes, |
| plane_state->format ? |
| plane_state->format->planes : 0, |
| plane_state->hwindex); |
| } |
| |
| group_free_planes[index] = 0xff & ~used_planes; |
| groups &= ~(1 << index); |
| |
| dev_dbg(rcdu->dev, "%s: group %u free planes mask 0x%02x\n", |
| __func__, index, group_free_planes[index]); |
| } |
| |
| /* Reallocate hardware planes for each plane that needs it. */ |
| for (i = 0; i < dev->mode_config.num_total_plane; ++i) { |
| struct rcar_du_plane_state *plane_state; |
| struct rcar_du_plane *plane; |
| unsigned int crtc_planes; |
| unsigned int free; |
| int idx; |
| |
| if (!state->planes[i]) |
| continue; |
| |
| plane = to_rcar_plane(state->planes[i]); |
| plane_state = to_rcar_plane_state(state->plane_states[i]); |
| |
| dev_dbg(rcdu->dev, "%s: allocating plane (%u,%u)\n", __func__, |
| plane->group->index, plane - plane->group->planes); |
| |
| /* Skip planes that are being disabled or don't need to be |
| * reallocated. |
| */ |
| if (!plane_state->format || |
| !rcar_du_plane_needs_realloc(plane, plane_state)) |
| continue; |
| |
| /* Try to allocate the plane from the free planes currently |
| * associated with the target CRTC to avoid restarting the CRTC |
| * group and thus minimize flicker. If it fails fall back to |
| * allocating from all free planes. |
| */ |
| crtc_planes = to_rcar_crtc(plane_state->state.crtc)->index % 2 |
| ? plane->group->dptsr_planes |
| : ~plane->group->dptsr_planes; |
| free = group_free_planes[plane->group->index]; |
| |
| idx = rcar_du_plane_hwalloc(plane_state->format->planes, |
| free & crtc_planes); |
| if (idx < 0) |
| idx = rcar_du_plane_hwalloc(plane_state->format->planes, |
| free); |
| if (idx < 0) { |
| dev_dbg(rcdu->dev, "%s: no available hardware plane\n", |
| __func__); |
| return idx; |
| } |
| |
| dev_dbg(rcdu->dev, "%s: allocated %u hwplanes (index %u)\n", |
| __func__, plane_state->format->planes, idx); |
| |
| plane_state->hwindex = idx; |
| |
| group_free_planes[plane->group->index] &= |
| ~rcar_du_plane_hwmask(plane_state); |
| |
| dev_dbg(rcdu->dev, "%s: group %u free planes mask 0x%02x\n", |
| __func__, plane->group->index, |
| group_free_planes[plane->group->index]); |
| } |
| |
| return 0; |
| } |
| |
| struct rcar_du_commit { |
| struct work_struct work; |
| struct drm_device *dev; |
| struct drm_atomic_state *state; |
| u32 crtcs; |
| }; |
| |
| static void rcar_du_atomic_complete(struct rcar_du_commit *commit) |
| { |
| struct drm_device *dev = commit->dev; |
| struct rcar_du_device *rcdu = dev->dev_private; |
| struct drm_atomic_state *old_state = commit->state; |
| |
| /* Apply the atomic update. */ |
| drm_atomic_helper_commit_modeset_disables(dev, old_state); |
| drm_atomic_helper_commit_modeset_enables(dev, old_state); |
| drm_atomic_helper_commit_planes(dev, old_state, false); |
| |
| drm_atomic_helper_wait_for_vblanks(dev, old_state); |
| |
| drm_atomic_helper_cleanup_planes(dev, old_state); |
| |
| drm_atomic_state_free(old_state); |
| |
| /* Complete the commit, wake up any waiter. */ |
| spin_lock(&rcdu->commit.wait.lock); |
| rcdu->commit.pending &= ~commit->crtcs; |
| wake_up_all_locked(&rcdu->commit.wait); |
| spin_unlock(&rcdu->commit.wait.lock); |
| |
| kfree(commit); |
| } |
| |
| static void rcar_du_atomic_work(struct work_struct *work) |
| { |
| struct rcar_du_commit *commit = |
| container_of(work, struct rcar_du_commit, work); |
| |
| rcar_du_atomic_complete(commit); |
| } |
| |
| static int rcar_du_atomic_commit(struct drm_device *dev, |
| struct drm_atomic_state *state, bool async) |
| { |
| struct rcar_du_device *rcdu = dev->dev_private; |
| struct rcar_du_commit *commit; |
| unsigned int i; |
| int ret; |
| |
| ret = drm_atomic_helper_prepare_planes(dev, state); |
| if (ret) |
| return ret; |
| |
| /* Allocate the commit object. */ |
| commit = kzalloc(sizeof(*commit), GFP_KERNEL); |
| if (commit == NULL) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| INIT_WORK(&commit->work, rcar_du_atomic_work); |
| commit->dev = dev; |
| commit->state = state; |
| |
| /* Wait until all affected CRTCs have completed previous commits and |
| * mark them as pending. |
| */ |
| for (i = 0; i < dev->mode_config.num_crtc; ++i) { |
| if (state->crtcs[i]) |
| commit->crtcs |= 1 << drm_crtc_index(state->crtcs[i]); |
| } |
| |
| spin_lock(&rcdu->commit.wait.lock); |
| ret = wait_event_interruptible_locked(rcdu->commit.wait, |
| !(rcdu->commit.pending & commit->crtcs)); |
| if (ret == 0) |
| rcdu->commit.pending |= commit->crtcs; |
| spin_unlock(&rcdu->commit.wait.lock); |
| |
| if (ret) { |
| kfree(commit); |
| goto error; |
| } |
| |
| /* Swap the state, this is the point of no return. */ |
| drm_atomic_helper_swap_state(dev, state); |
| |
| if (async) |
| schedule_work(&commit->work); |
| else |
| rcar_du_atomic_complete(commit); |
| |
| return 0; |
| |
| error: |
| drm_atomic_helper_cleanup_planes(dev, state); |
| return ret; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Initialization |
| */ |
| |
| static const struct drm_mode_config_funcs rcar_du_mode_config_funcs = { |
| .fb_create = rcar_du_fb_create, |
| .output_poll_changed = rcar_du_output_poll_changed, |
| .atomic_check = rcar_du_atomic_check, |
| .atomic_commit = rcar_du_atomic_commit, |
| }; |
| |
| static int rcar_du_encoders_init_one(struct rcar_du_device *rcdu, |
| enum rcar_du_output output, |
| struct of_endpoint *ep) |
| { |
| static const struct { |
| const char *compatible; |
| enum rcar_du_encoder_type type; |
| } encoders[] = { |
| { "adi,adv7123", RCAR_DU_ENCODER_VGA }, |
| { "adi,adv7511w", RCAR_DU_ENCODER_HDMI }, |
| { "thine,thc63lvdm83d", RCAR_DU_ENCODER_LVDS }, |
| }; |
| |
| enum rcar_du_encoder_type enc_type = RCAR_DU_ENCODER_NONE; |
| struct device_node *connector = NULL; |
| struct device_node *encoder = NULL; |
| struct device_node *ep_node = NULL; |
| struct device_node *entity_ep_node; |
| struct device_node *entity; |
| int ret; |
| |
| /* |
| * Locate the connected entity and infer its type from the number of |
| * endpoints. |
| */ |
| entity = of_graph_get_remote_port_parent(ep->local_node); |
| if (!entity) { |
| dev_dbg(rcdu->dev, "unconnected endpoint %s, skipping\n", |
| ep->local_node->full_name); |
| return -ENODEV; |
| } |
| |
| entity_ep_node = of_parse_phandle(ep->local_node, "remote-endpoint", 0); |
| |
| for_each_endpoint_of_node(entity, ep_node) { |
| if (ep_node == entity_ep_node) |
| continue; |
| |
| /* |
| * We've found one endpoint other than the input, this must |
| * be an encoder. Locate the connector. |
| */ |
| encoder = entity; |
| connector = of_graph_get_remote_port_parent(ep_node); |
| of_node_put(ep_node); |
| |
| if (!connector) { |
| dev_warn(rcdu->dev, |
| "no connector for encoder %s, skipping\n", |
| encoder->full_name); |
| of_node_put(entity_ep_node); |
| of_node_put(encoder); |
| return -ENODEV; |
| } |
| |
| break; |
| } |
| |
| of_node_put(entity_ep_node); |
| |
| if (encoder) { |
| /* |
| * If an encoder has been found, get its type based on its |
| * compatible string. |
| */ |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(encoders); ++i) { |
| if (of_device_is_compatible(encoder, |
| encoders[i].compatible)) { |
| enc_type = encoders[i].type; |
| break; |
| } |
| } |
| |
| if (i == ARRAY_SIZE(encoders)) { |
| dev_warn(rcdu->dev, |
| "unknown encoder type for %s, skipping\n", |
| encoder->full_name); |
| of_node_put(encoder); |
| of_node_put(connector); |
| return -EINVAL; |
| } |
| } else { |
| /* |
| * If no encoder has been found the entity must be the |
| * connector. |
| */ |
| connector = entity; |
| } |
| |
| ret = rcar_du_encoder_init(rcdu, enc_type, output, encoder, connector); |
| of_node_put(encoder); |
| of_node_put(connector); |
| |
| if (ret && ret != -EPROBE_DEFER) |
| dev_warn(rcdu->dev, |
| "failed to initialize encoder %s (%d), skipping\n", |
| encoder->full_name, ret); |
| |
| return ret; |
| } |
| |
| static int rcar_du_encoders_init(struct rcar_du_device *rcdu) |
| { |
| struct device_node *np = rcdu->dev->of_node; |
| struct device_node *ep_node; |
| unsigned int num_encoders = 0; |
| |
| /* |
| * Iterate over the endpoints and create one encoder for each output |
| * pipeline. |
| */ |
| for_each_endpoint_of_node(np, ep_node) { |
| enum rcar_du_output output; |
| struct of_endpoint ep; |
| unsigned int i; |
| int ret; |
| |
| ret = of_graph_parse_endpoint(ep_node, &ep); |
| if (ret < 0) { |
| of_node_put(ep_node); |
| return ret; |
| } |
| |
| /* Find the output route corresponding to the port number. */ |
| for (i = 0; i < RCAR_DU_OUTPUT_MAX; ++i) { |
| if (rcdu->info->routes[i].possible_crtcs && |
| rcdu->info->routes[i].port == ep.port) { |
| output = i; |
| break; |
| } |
| } |
| |
| if (i == RCAR_DU_OUTPUT_MAX) { |
| dev_warn(rcdu->dev, |
| "port %u references unexisting output, skipping\n", |
| ep.port); |
| continue; |
| } |
| |
| /* Process the output pipeline. */ |
| ret = rcar_du_encoders_init_one(rcdu, output, &ep); |
| if (ret < 0) { |
| if (ret == -EPROBE_DEFER) { |
| of_node_put(ep_node); |
| return ret; |
| } |
| |
| continue; |
| } |
| |
| num_encoders++; |
| } |
| |
| return num_encoders; |
| } |
| |
| static int rcar_du_properties_init(struct rcar_du_device *rcdu) |
| { |
| rcdu->props.alpha = |
| drm_property_create_range(rcdu->ddev, 0, "alpha", 0, 255); |
| if (rcdu->props.alpha == NULL) |
| return -ENOMEM; |
| |
| /* The color key is expressed as an RGB888 triplet stored in a 32-bit |
| * integer in XRGB8888 format. Bit 24 is used as a flag to disable (0) |
| * or enable source color keying (1). |
| */ |
| rcdu->props.colorkey = |
| drm_property_create_range(rcdu->ddev, 0, "colorkey", |
| 0, 0x01ffffff); |
| if (rcdu->props.colorkey == NULL) |
| return -ENOMEM; |
| |
| rcdu->props.zpos = |
| drm_property_create_range(rcdu->ddev, 0, "zpos", 1, 7); |
| if (rcdu->props.zpos == NULL) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| int rcar_du_modeset_init(struct rcar_du_device *rcdu) |
| { |
| static const unsigned int mmio_offsets[] = { |
| DU0_REG_OFFSET, DU2_REG_OFFSET |
| }; |
| |
| struct drm_device *dev = rcdu->ddev; |
| struct drm_encoder *encoder; |
| struct drm_fbdev_cma *fbdev; |
| unsigned int num_encoders; |
| unsigned int num_groups; |
| unsigned int i; |
| int ret; |
| |
| drm_mode_config_init(dev); |
| |
| dev->mode_config.min_width = 0; |
| dev->mode_config.min_height = 0; |
| dev->mode_config.max_width = 4095; |
| dev->mode_config.max_height = 2047; |
| dev->mode_config.funcs = &rcar_du_mode_config_funcs; |
| |
| rcdu->num_crtcs = rcdu->info->num_crtcs; |
| |
| ret = rcar_du_properties_init(rcdu); |
| if (ret < 0) |
| return ret; |
| |
| /* Initialize the groups. */ |
| num_groups = DIV_ROUND_UP(rcdu->num_crtcs, 2); |
| |
| for (i = 0; i < num_groups; ++i) { |
| struct rcar_du_group *rgrp = &rcdu->groups[i]; |
| |
| mutex_init(&rgrp->lock); |
| |
| rgrp->dev = rcdu; |
| rgrp->mmio_offset = mmio_offsets[i]; |
| rgrp->index = i; |
| rgrp->num_crtcs = min(rcdu->num_crtcs - 2 * i, 2U); |
| |
| /* If we have more than one CRTCs in this group pre-associate |
| * planes 0-3 with CRTC 0 and planes 4-7 with CRTC 1 to minimize |
| * flicker occurring when the association is changed. |
| */ |
| rgrp->dptsr_planes = rgrp->num_crtcs > 1 ? 0xf0 : 0; |
| |
| ret = rcar_du_planes_init(rgrp); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Create the CRTCs. */ |
| for (i = 0; i < rcdu->num_crtcs; ++i) { |
| struct rcar_du_group *rgrp = &rcdu->groups[i / 2]; |
| |
| ret = rcar_du_crtc_create(rgrp, i); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Initialize the encoders. */ |
| ret = rcar_du_lvdsenc_init(rcdu); |
| if (ret < 0) |
| return ret; |
| |
| ret = rcar_du_encoders_init(rcdu); |
| if (ret < 0) |
| return ret; |
| |
| if (ret == 0) { |
| dev_err(rcdu->dev, "error: no encoder could be initialized\n"); |
| return -EINVAL; |
| } |
| |
| num_encoders = ret; |
| |
| /* Set the possible CRTCs and possible clones. There's always at least |
| * one way for all encoders to clone each other, set all bits in the |
| * possible clones field. |
| */ |
| list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { |
| struct rcar_du_encoder *renc = to_rcar_encoder(encoder); |
| const struct rcar_du_output_routing *route = |
| &rcdu->info->routes[renc->output]; |
| |
| encoder->possible_crtcs = route->possible_crtcs; |
| encoder->possible_clones = (1 << num_encoders) - 1; |
| } |
| |
| drm_mode_config_reset(dev); |
| |
| drm_kms_helper_poll_init(dev); |
| |
| if (dev->mode_config.num_connector) { |
| fbdev = drm_fbdev_cma_init(dev, 32, dev->mode_config.num_crtc, |
| dev->mode_config.num_connector); |
| if (IS_ERR(fbdev)) |
| return PTR_ERR(fbdev); |
| |
| rcdu->fbdev = fbdev; |
| } else { |
| dev_info(rcdu->dev, |
| "no connector found, disabling fbdev emulation\n"); |
| } |
| |
| return 0; |
| } |