| /* |
| * Copyright 2011 Tilera Corporation. All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation, version 2. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for |
| * more details. |
| */ |
| |
| /** |
| * Interface definitions for the mpipe driver. |
| */ |
| |
| #ifndef _SYS_HV_DRV_MPIPE_INTF_H |
| #define _SYS_HV_DRV_MPIPE_INTF_H |
| |
| #include <arch/mpipe.h> |
| #include <arch/mpipe_constants.h> |
| |
| |
| /** Number of mPIPE instances supported */ |
| #define HV_MPIPE_INSTANCE_MAX (2) |
| |
| /** Number of buffer stacks (32). */ |
| #define HV_MPIPE_NUM_BUFFER_STACKS \ |
| (MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH) |
| |
| /** Number of NotifRings (256). */ |
| #define HV_MPIPE_NUM_NOTIF_RINGS (MPIPE_NUM_NOTIF_RINGS) |
| |
| /** Number of NotifGroups (32). */ |
| #define HV_MPIPE_NUM_NOTIF_GROUPS (MPIPE_NUM_NOTIF_GROUPS) |
| |
| /** Number of buckets (4160). */ |
| #define HV_MPIPE_NUM_BUCKETS (MPIPE_NUM_BUCKETS) |
| |
| /** Number of "lo" buckets (4096). */ |
| #define HV_MPIPE_NUM_LO_BUCKETS 4096 |
| |
| /** Number of "hi" buckets (64). */ |
| #define HV_MPIPE_NUM_HI_BUCKETS \ |
| (HV_MPIPE_NUM_BUCKETS - HV_MPIPE_NUM_LO_BUCKETS) |
| |
| /** Number of edma rings (24). */ |
| #define HV_MPIPE_NUM_EDMA_RINGS \ |
| (MPIPE_MMIO_INIT_DAT_GX36_1__EDMA_POST_MASK_WIDTH) |
| |
| |
| |
| |
| /** A flag bit indicating a fixed resource allocation. */ |
| #define HV_MPIPE_ALLOC_FIXED 0x01 |
| |
| /** Offset for the config register MMIO region. */ |
| #define HV_MPIPE_CONFIG_MMIO_OFFSET \ |
| (MPIPE_MMIO_ADDR__REGION_VAL_CFG << MPIPE_MMIO_ADDR__REGION_SHIFT) |
| |
| /** Size of the config register MMIO region. */ |
| #define HV_MPIPE_CONFIG_MMIO_SIZE (64 * 1024) |
| |
| /** Offset for the config register MMIO region. */ |
| #define HV_MPIPE_FAST_MMIO_OFFSET \ |
| (MPIPE_MMIO_ADDR__REGION_VAL_IDMA << MPIPE_MMIO_ADDR__REGION_SHIFT) |
| |
| /** Size of the fast register MMIO region (IDMA, EDMA, buffer stack). */ |
| #define HV_MPIPE_FAST_MMIO_SIZE \ |
| ((MPIPE_MMIO_ADDR__REGION_VAL_BSM + 1 - MPIPE_MMIO_ADDR__REGION_VAL_IDMA) \ |
| << MPIPE_MMIO_ADDR__REGION_SHIFT) |
| |
| |
| /* |
| * Each type of resource allocation comes in quantized chunks, where |
| * XXX_BITS is the number of chunks, and XXX_RES_PER_BIT is the number |
| * of resources in each chunk. |
| */ |
| |
| /** Number of buffer stack chunks available (32). */ |
| #define HV_MPIPE_ALLOC_BUFFER_STACKS_BITS \ |
| MPIPE_MMIO_INIT_DAT_GX36_1__BUFFER_STACK_MASK_WIDTH |
| |
| /** Granularity of buffer stack allocation (1). */ |
| #define HV_MPIPE_ALLOC_BUFFER_STACKS_RES_PER_BIT \ |
| (HV_MPIPE_NUM_BUFFER_STACKS / HV_MPIPE_ALLOC_BUFFER_STACKS_BITS) |
| |
| /** Number of NotifRing chunks available (32). */ |
| #define HV_MPIPE_ALLOC_NOTIF_RINGS_BITS \ |
| MPIPE_MMIO_INIT_DAT_GX36_0__NOTIF_RING_MASK_WIDTH |
| |
| /** Granularity of NotifRing allocation (8). */ |
| #define HV_MPIPE_ALLOC_NOTIF_RINGS_RES_PER_BIT \ |
| (HV_MPIPE_NUM_NOTIF_RINGS / HV_MPIPE_ALLOC_NOTIF_RINGS_BITS) |
| |
| /** Number of NotifGroup chunks available (32). */ |
| #define HV_MPIPE_ALLOC_NOTIF_GROUPS_BITS \ |
| HV_MPIPE_NUM_NOTIF_GROUPS |
| |
| /** Granularity of NotifGroup allocation (1). */ |
| #define HV_MPIPE_ALLOC_NOTIF_GROUPS_RES_PER_BIT \ |
| (HV_MPIPE_NUM_NOTIF_GROUPS / HV_MPIPE_ALLOC_NOTIF_GROUPS_BITS) |
| |
| /** Number of lo bucket chunks available (16). */ |
| #define HV_MPIPE_ALLOC_LO_BUCKETS_BITS \ |
| MPIPE_MMIO_INIT_DAT_GX36_0__BUCKET_RELEASE_MASK_LO_WIDTH |
| |
| /** Granularity of lo bucket allocation (256). */ |
| #define HV_MPIPE_ALLOC_LO_BUCKETS_RES_PER_BIT \ |
| (HV_MPIPE_NUM_LO_BUCKETS / HV_MPIPE_ALLOC_LO_BUCKETS_BITS) |
| |
| /** Number of hi bucket chunks available (16). */ |
| #define HV_MPIPE_ALLOC_HI_BUCKETS_BITS \ |
| MPIPE_MMIO_INIT_DAT_GX36_0__BUCKET_RELEASE_MASK_HI_WIDTH |
| |
| /** Granularity of hi bucket allocation (4). */ |
| #define HV_MPIPE_ALLOC_HI_BUCKETS_RES_PER_BIT \ |
| (HV_MPIPE_NUM_HI_BUCKETS / HV_MPIPE_ALLOC_HI_BUCKETS_BITS) |
| |
| /** Number of eDMA ring chunks available (24). */ |
| #define HV_MPIPE_ALLOC_EDMA_RINGS_BITS \ |
| MPIPE_MMIO_INIT_DAT_GX36_1__EDMA_POST_MASK_WIDTH |
| |
| /** Granularity of eDMA ring allocation (1). */ |
| #define HV_MPIPE_ALLOC_EDMA_RINGS_RES_PER_BIT \ |
| (HV_MPIPE_NUM_EDMA_RINGS / HV_MPIPE_ALLOC_EDMA_RINGS_BITS) |
| |
| |
| |
| |
| /** Bit vector encoding which NotifRings are in a NotifGroup. */ |
| typedef struct |
| { |
| /** The actual bits. */ |
| uint64_t ring_mask[4]; |
| |
| } gxio_mpipe_notif_group_bits_t; |
| |
| |
| /** Another name for MPIPE_LBL_INIT_DAT_BSTS_TBL_t. */ |
| typedef MPIPE_LBL_INIT_DAT_BSTS_TBL_t gxio_mpipe_bucket_info_t; |
| |
| |
| |
| /** Eight buffer stack ids. */ |
| typedef struct |
| { |
| /** The stacks. */ |
| uint8_t stacks[8]; |
| |
| } gxio_mpipe_rules_stacks_t; |
| |
| |
| /** A destination mac address. */ |
| typedef struct |
| { |
| /** The octets. */ |
| uint8_t octets[6]; |
| |
| } gxio_mpipe_rules_dmac_t; |
| |
| |
| /** A vlan. */ |
| typedef uint16_t gxio_mpipe_rules_vlan_t; |
| |
| |
| |
| /** Maximum number of characters in a link name. */ |
| #define GXIO_MPIPE_LINK_NAME_LEN 32 |
| |
| |
| /** Structure holding a link name. Only needed, and only typedef'ed, |
| * because the IORPC stub generator only handles types which are single |
| * words coming before the parameter name. */ |
| typedef struct |
| { |
| /** The name itself. */ |
| char name[GXIO_MPIPE_LINK_NAME_LEN]; |
| } |
| _gxio_mpipe_link_name_t; |
| |
| /** Maximum number of characters in a symbol name. */ |
| #define GXIO_MPIPE_SYMBOL_NAME_LEN 128 |
| |
| |
| /** Structure holding a symbol name. Only needed, and only typedef'ed, |
| * because the IORPC stub generator only handles types which are single |
| * words coming before the parameter name. */ |
| typedef struct |
| { |
| /** The name itself. */ |
| char name[GXIO_MPIPE_SYMBOL_NAME_LEN]; |
| } |
| _gxio_mpipe_symbol_name_t; |
| |
| |
| /** Structure holding a MAC address. */ |
| typedef struct |
| { |
| /** The address. */ |
| uint8_t mac[6]; |
| } |
| _gxio_mpipe_link_mac_t; |
| |
| |
| |
| /** Request shared data permission -- that is, the ability to send and |
| * receive packets -- on the specified link. Other processes may also |
| * request shared data permission on the same link. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, |
| * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_DATA 0x00000001UL |
| |
| /** Do not request data permission on the specified link. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, |
| * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_NO_DATA 0x00000002UL |
| |
| /** Request exclusive data permission -- that is, the ability to send and |
| * receive packets -- on the specified link. No other processes may |
| * request data permission on this link, and if any process already has |
| * data permission on it, this open will fail. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_DATA, ::GXIO_MPIPE_LINK_NO_DATA, |
| * or ::GXIO_MPIPE_LINK_EXCL_DATA may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_DATA is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_EXCL_DATA 0x00000004UL |
| |
| /** Request shared stats permission -- that is, the ability to read and write |
| * registers which contain link statistics, and to get link attributes -- |
| * on the specified link. Other processes may also request shared stats |
| * permission on the same link. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, |
| * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_STATS 0x00000008UL |
| |
| /** Do not request stats permission on the specified link. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, |
| * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_NO_STATS 0x00000010UL |
| |
| /** Request exclusive stats permission -- that is, the ability to read and |
| * write registers which contain link statistics, and to get link |
| * attributes -- on the specified link. No other processes may request |
| * stats permission on this link, and if any process already |
| * has stats permission on it, this open will fail. |
| * |
| * Requesting exclusive stats permission is normally a very bad idea, since |
| * it prevents programs like mpipe-stat from providing information on this |
| * link. Applications should only do this if they use MAC statistics |
| * registers, and cannot tolerate any of the clear-on-read registers being |
| * reset by other statistics programs. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_STATS, ::GXIO_MPIPE_LINK_NO_STATS, |
| * or ::GXIO_MPIPE_LINK_EXCL_STATS may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_STATS is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_EXCL_STATS 0x00000020UL |
| |
| /** Request shared control permission -- that is, the ability to modify link |
| * attributes, and read and write MAC and MDIO registers -- on the |
| * specified link. Other processes may also request shared control |
| * permission on the same link. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, |
| * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_CTL 0x00000040UL |
| |
| /** Do not request control permission on the specified link. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, |
| * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_NO_CTL 0x00000080UL |
| |
| /** Request exclusive control permission -- that is, the ability to modify |
| * link attributes, and read and write MAC and MDIO registers -- on the |
| * specified link. No other processes may request control permission on |
| * this link, and if any process already has control permission on it, |
| * this open will fail. |
| * |
| * Requesting exclusive control permission is not always a good idea, since |
| * it prevents programs like mpipe-link from configuring the link. |
| * |
| * No more than one of ::GXIO_MPIPE_LINK_CTL, ::GXIO_MPIPE_LINK_NO_CTL, |
| * or ::GXIO_MPIPE_LINK_EXCL_CTL may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_CTL is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_EXCL_CTL 0x00000100UL |
| |
| /** Set the desired state of the link to up, allowing any speeds which are |
| * supported by the link hardware, as part of this open operation; do not |
| * change the desired state of the link when it is closed or the process |
| * exits. No more than one of ::GXIO_MPIPE_LINK_AUTO_UP, |
| * ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or |
| * ::GXIO_MPIPE_LINK_AUTO_NONE may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_AUTO_UP 0x00000200UL |
| |
| /** Set the desired state of the link to up, allowing any speeds which are |
| * supported by the link hardware, as part of this open operation; when the |
| * link is closed or this process exits, if no other process has the link |
| * open, set the desired state of the link to down. No more than one of |
| * ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN, |
| * ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be |
| * specifed in a gxio_mpipe_link_open() call. If none are specified, |
| * ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_AUTO_UPDOWN 0x00000400UL |
| |
| /** Do not change the desired state of the link as part of the open |
| * operation; when the link is closed or this process exits, if no other |
| * process has the link open, set the desired state of the link to down. |
| * No more than one of ::GXIO_MPIPE_LINK_AUTO_UP, |
| * ::GXIO_MPIPE_LINK_AUTO_UPDOWN, ::GXIO_MPIPE_LINK_AUTO_DOWN, or |
| * ::GXIO_MPIPE_LINK_AUTO_NONE may be specifed in a gxio_mpipe_link_open() |
| * call. If none are specified, ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_AUTO_DOWN 0x00000800UL |
| |
| /** Do not change the desired state of the link as part of the open |
| * operation; do not change the desired state of the link when it is |
| * closed or the process exits. No more than one of |
| * ::GXIO_MPIPE_LINK_AUTO_UP, ::GXIO_MPIPE_LINK_AUTO_UPDOWN, |
| * ::GXIO_MPIPE_LINK_AUTO_DOWN, or ::GXIO_MPIPE_LINK_AUTO_NONE may be |
| * specifed in a gxio_mpipe_link_open() call. If none are specified, |
| * ::GXIO_MPIPE_LINK_AUTO_UPDOWN is assumed. |
| */ |
| #define GXIO_MPIPE_LINK_AUTO_NONE 0x00001000UL |
| |
| /** Request that this open call not complete until the network link is up. |
| * The process will wait as long as necessary for this to happen; |
| * applications which wish to abandon waiting for the link after a |
| * specific time period should not specify this flag when opening a link, |
| * but should instead call gxio_mpipe_link_wait() afterward. The link |
| * must be opened with stats permission. Note that this flag by itself |
| * does not change the desired link state; if other open flags or previous |
| * link state changes have not requested a desired state of up, the open |
| * call will never complete. This flag is not available to kernel |
| * clients. |
| */ |
| #define GXIO_MPIPE_LINK_WAIT 0x00002000UL |
| |
| |
| /* |
| * Note: link attributes must fit in 24 bits, since we use the top 8 bits |
| * of the IORPC offset word for the channel number. |
| */ |
| |
| /** Determine whether jumbo frames may be received. If this attribute's |
| * value value is nonzero, the MAC will accept frames of up to 10240 bytes. |
| * If the value is zero, the MAC will only accept frames of up to 1544 |
| * bytes. The default value is zero. */ |
| #define GXIO_MPIPE_LINK_RECEIVE_JUMBO 0x010000 |
| |
| /** Determine whether to send pause frames on this link if the mPIPE packet |
| * FIFO is nearly full. If the value is zero, pause frames are not sent. |
| * If the value is nonzero, it is the delay value which will be sent in any |
| * pause frames which are output, in units of 512 bit times. |
| * |
| * Bear in mind that in almost all circumstances, the mPIPE packet FIFO |
| * will never fill up, since mPIPE will empty it as fast as or faster than |
| * the incoming data rate, by either delivering or dropping packets. The |
| * only situation in which this is not true is if the memory and cache |
| * subsystem is extremely heavily loaded, and mPIPE cannot perform DMA of |
| * packet data to memory in a timely fashion. In particular, pause frames |
| * will <em>not</em> be sent if packets cannot be delivered because |
| * NotifRings are full, buckets are full, or buffers are not available in |
| * a buffer stack. */ |
| #define GXIO_MPIPE_LINK_SEND_PAUSE 0x020000 |
| |
| /** Determine whether to suspend output on the receipt of pause frames. |
| * If the value is nonzero, mPIPE shim will suspend output on the link's |
| * channel when a pause frame is received. If the value is zero, pause |
| * frames will be ignored. The default value is zero. */ |
| #define GXIO_MPIPE_LINK_RECEIVE_PAUSE 0x030000 |
| |
| /** Interface MAC address. The value is a 6-byte MAC address, in the least |
| * significant 48 bits of the value; in other words, an address which would |
| * be printed as '12:34:56:78:90:AB' in IEEE 802 canonical format would |
| * be returned as 0x12345678ab. |
| * |
| * Depending upon the overall system design, a MAC address may or may not |
| * be available for each interface. Note that the interface's MAC address |
| * does not limit the packets received on its channel, although the |
| * classifier's rules could be configured to do that. Similarly, the MAC |
| * address is not used when transmitting packets, although applications |
| * could certainly decide to use the assigned address as a source MAC |
| * address when doing so. This attribute may only be retrieved with |
| * gxio_mpipe_link_get_attr(); it may not be modified. |
| */ |
| #define GXIO_MPIPE_LINK_MAC 0x040000 |
| |
| /** Determine whether to discard egress packets on link down. If this value |
| * is nonzero, packets sent on this link while the link is down will be |
| * discarded. If this value is zero, no packets will be sent on this link |
| * while it is down. The default value is one. */ |
| #define GXIO_MPIPE_LINK_DISCARD_IF_DOWN 0x050000 |
| |
| /** Possible link state. The value is a combination of link state flags, |
| * ORed together, that indicate link modes which are actually supported by |
| * the hardware. This attribute may only be retrieved with |
| * gxio_mpipe_link_get_attr(); it may not be modified. */ |
| #define GXIO_MPIPE_LINK_POSSIBLE_STATE 0x060000 |
| |
| /** Current link state. The value is a combination of link state flags, |
| * ORed together, that indicate the current state of the hardware. If the |
| * link is down, the value ANDed with ::GXIO_MPIPE_LINK_SPEED will be zero; |
| * if the link is up, the value ANDed with ::GXIO_MPIPE_LINK_SPEED will |
| * result in exactly one of the speed values, indicating the current speed. |
| * This attribute may only be retrieved with gxio_mpipe_link_get_attr(); it |
| * may not be modified. */ |
| #define GXIO_MPIPE_LINK_CURRENT_STATE 0x070000 |
| |
| /** Desired link state. The value is a conbination of flags, which specify |
| * the desired state for the link. With gxio_mpipe_link_set_attr(), this |
| * will, in the background, attempt to bring up the link using whichever of |
| * the requested flags are reasonable, or take down the link if the flags |
| * are zero. The actual link up or down operation may happen after this |
| * call completes. If the link state changes in the future, the system |
| * will continue to try to get back to the desired link state; for |
| * instance, if the link is brought up successfully, and then the network |
| * cable is disconnected, the link will go down. However, the desired |
| * state of the link is still up, so if the cable is reconnected, the link |
| * will be brought up again. |
| * |
| * With gxio_mpipe_link_set_attr(), this will indicate the desired state |
| * for the link, as set with a previous gxio_mpipe_link_set_attr() call, |
| * or implicitly by a gxio_mpipe_link_open() or link close operation. |
| * This may not reflect the current state of the link; to get that, use |
| * ::GXIO_MPIPE_LINK_CURRENT_STATE. |
| */ |
| #define GXIO_MPIPE_LINK_DESIRED_STATE 0x080000 |
| |
| |
| |
| /** Link can run, should run, or is running at 10 Mbps. */ |
| #define GXIO_MPIPE_LINK_10M 0x0000000000000001UL |
| |
| /** Link can run, should run, or is running at 100 Mbps. */ |
| #define GXIO_MPIPE_LINK_100M 0x0000000000000002UL |
| |
| /** Link can run, should run, or is running at 1 Gbps. */ |
| #define GXIO_MPIPE_LINK_1G 0x0000000000000004UL |
| |
| /** Link can run, should run, or is running at 10 Gbps. */ |
| #define GXIO_MPIPE_LINK_10G 0x0000000000000008UL |
| |
| /** Link can run, should run, or is running at 20 Gbps. */ |
| #define GXIO_MPIPE_LINK_20G 0x0000000000000010UL |
| |
| /** Link can run, should run, or is running at 25 Gbps. */ |
| #define GXIO_MPIPE_LINK_25G 0x0000000000000020UL |
| |
| /** Link can run, should run, or is running at 50 Gbps. */ |
| #define GXIO_MPIPE_LINK_50G 0x0000000000000040UL |
| |
| /** Link should run at the highest speed supported by the link and by |
| * the device connected to the link. Only usable as a value for |
| * the link's desired state; never returned as a value for the current |
| * or possible states. */ |
| #define GXIO_MPIPE_LINK_ANYSPEED 0x0000000000000800UL |
| |
| /** All legal link speeds. This value is provided for use in extracting |
| * the speed-related subset of the link state flags; it is not intended |
| * to be set directly as a value for one of the GXIO_MPIPE_LINK_xxx_STATE |
| * attributes. A link is up or is requested to be up if its current or |
| * desired state, respectively, ANDED with this value, is nonzero. */ |
| #define GXIO_MPIPE_LINK_SPEED_MASK 0x0000000000000FFFUL |
| |
| /** Link can run, should run, or is running in MAC loopback mode. This |
| * loops transmitted packets back to the receiver, inside the Tile |
| * Processor. */ |
| #define GXIO_MPIPE_LINK_LOOP_MAC 0x0000000000001000UL |
| |
| /** Link can run, should run, or is running in PHY loopback mode. This |
| * loops transmitted packets back to the receiver, inside the external |
| * PHY chip. */ |
| #define GXIO_MPIPE_LINK_LOOP_PHY 0x0000000000002000UL |
| |
| /** Link can run, should run, or is running in external loopback mode. |
| * This requires that an external loopback plug be installed on the |
| * Ethernet port. Note that only some links require that this be |
| * configured via the gxio_mpipe_link routines; other links can do |
| * external loopack with the plug and no special configuration. */ |
| #define GXIO_MPIPE_LINK_LOOP_EXT 0x0000000000004000UL |
| |
| /** All legal loopback types. */ |
| #define GXIO_MPIPE_LINK_LOOP_MASK 0x000000000000F000UL |
| |
| /** Link can run, should run, or is running in full-duplex mode. |
| * If neither ::GXIO_MPIPE_LINK_FDX nor ::GXIO_MPIPE_LINK_HDX are |
| * specified in a set of desired state flags, both are assumed. */ |
| #define GXIO_MPIPE_LINK_FDX 0x0000000000010000UL |
| |
| /** Link can run, should run, or is running in half-duplex mode. |
| * If neither ::GXIO_MPIPE_LINK_FDX nor ::GXIO_MPIPE_LINK_HDX are |
| * specified in a set of desired state flags, both are assumed. */ |
| #define GXIO_MPIPE_LINK_HDX 0x0000000000020000UL |
| |
| |
| /** An individual rule. */ |
| typedef struct |
| { |
| /** The total size. */ |
| uint16_t size; |
| |
| /** The priority. */ |
| int16_t priority; |
| |
| /** The "headroom" in each buffer. */ |
| uint8_t headroom; |
| |
| /** The "tailroom" in each buffer. */ |
| uint8_t tailroom; |
| |
| /** The "capacity" of the largest buffer. */ |
| uint16_t capacity; |
| |
| /** The mask for converting a flow hash into a bucket. */ |
| uint16_t bucket_mask; |
| |
| /** The offset for converting a flow hash into a bucket. */ |
| uint16_t bucket_first; |
| |
| /** The buffer stack ids. */ |
| gxio_mpipe_rules_stacks_t stacks; |
| |
| /** The actual channels. */ |
| uint32_t channel_bits; |
| |
| /** The number of dmacs. */ |
| uint16_t num_dmacs; |
| |
| /** The number of vlans. */ |
| uint16_t num_vlans; |
| |
| /** The actual dmacs and vlans. */ |
| uint8_t dmacs_and_vlans[]; |
| |
| } gxio_mpipe_rules_rule_t; |
| |
| |
| /** A list of classifier rules. */ |
| typedef struct |
| { |
| /** The offset to the end of the current rule. */ |
| uint16_t tail; |
| |
| /** The offset to the start of the current rule. */ |
| uint16_t head; |
| |
| /** The actual rules. */ |
| uint8_t rules[4096 - 4]; |
| |
| } gxio_mpipe_rules_list_t; |
| |
| |
| |
| |
| /** mPIPE statistics structure. These counters include all relevant |
| * events occurring on all links within the mPIPE shim. */ |
| typedef struct |
| { |
| /** Number of ingress packets dropped for any reason. */ |
| uint64_t ingress_drops; |
| /** Number of ingress packets dropped because a buffer stack was empty. */ |
| uint64_t ingress_drops_no_buf; |
| /** Number of ingress packets dropped or truncated due to lack of space in |
| * the iPkt buffer. */ |
| uint64_t ingress_drops_ipkt; |
| /** Number of ingress packets dropped by the classifier or load balancer */ |
| uint64_t ingress_drops_cls_lb; |
| /** Total number of ingress packets. */ |
| uint64_t ingress_packets; |
| /** Total number of egress packets. */ |
| uint64_t egress_packets; |
| /** Total number of ingress bytes. */ |
| uint64_t ingress_bytes; |
| /** Total number of egress bytes. */ |
| uint64_t egress_bytes; |
| } |
| gxio_mpipe_stats_t; |
| |
| |
| #endif /* _SYS_HV_DRV_MPIPE_INTF_H */ |
