| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "brcm,bcm7425"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mips-hpt-frequency = <163125000>; |
| |
| cpu@0 { |
| compatible = "brcm,bmips5000"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,bmips5000"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| }; |
| |
| aliases { |
| uart0 = &uart0; |
| }; |
| |
| cpu_intc: cpu_intc { |
| #address-cells = <0>; |
| compatible = "mti,cpu-interrupt-controller"; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| clocks { |
| uart_clk: uart_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <81000000>; |
| }; |
| }; |
| |
| rdb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| compatible = "simple-bus"; |
| ranges = <0 0x10000000 0x01000000>; |
| |
| periph_intc: periph_intc@41a400 { |
| compatible = "brcm,bcm7038-l1-intc"; |
| reg = <0x41a400 0x30>, <0x41a600 0x30>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpu_intc>; |
| interrupts = <2>, <3>; |
| }; |
| |
| sun_l2_intc: sun_l2_intc@403000 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x403000 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <47>; |
| }; |
| |
| gisb-arb@400000 { |
| compatible = "brcm,bcm7400-gisb-arb"; |
| reg = <0x400000 0xdc>; |
| native-endian; |
| interrupt-parent = <&sun_l2_intc>; |
| interrupts = <0>, <2>; |
| brcm,gisb-arb-master-mask = <0x177b>; |
| brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0", |
| "bsp_0", "rdc_0", |
| "raaga_0", "avd_1", |
| "jtag_0", "svd_0", |
| "vice_0"; |
| }; |
| |
| upg_irq0_intc: upg_irq0_intc@406780 { |
| compatible = "brcm,bcm7120-l2-intc"; |
| reg = <0x406780 0x8>; |
| |
| brcm,int-map-mask = <0x44>; |
| brcm,int-fwd-mask = <0x70000>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&periph_intc>; |
| interrupts = <55>; |
| }; |
| |
| sun_top_ctrl: syscon@404000 { |
| compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; |
| reg = <0x404000 0x51c>; |
| little-endian; |
| }; |
| |
| reboot { |
| compatible = "brcm,brcmstb-reboot"; |
| syscon = <&sun_top_ctrl 0x304 0x308>; |
| }; |
| |
| uart0: serial@406b00 { |
| compatible = "ns16550a"; |
| reg = <0x406b00 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <61>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| enet0: ethernet@b80000 { |
| phy-mode = "internal"; |
| phy-handle = <&phy1>; |
| mac-address = [ 00 10 18 36 23 1a ]; |
| compatible = "brcm,genet-v3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| reg = <0xb80000 0x11c88>; |
| interrupts = <17>, <18>; |
| interrupt-parent = <&periph_intc>; |
| status = "disabled"; |
| |
| mdio@e14 { |
| compatible = "brcm,genet-mdio-v3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| reg = <0xe14 0x8>; |
| |
| phy1: ethernet-phy@1 { |
| max-speed = <100>; |
| reg = <0x1>; |
| compatible = "brcm,40nm-ephy", |
| "ethernet-phy-ieee802.3-c22"; |
| }; |
| }; |
| }; |
| |
| ehci0: usb@480300 { |
| compatible = "brcm,bcm7425-ehci", "generic-ehci"; |
| reg = <0x480300 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <65>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@480400 { |
| compatible = "brcm,bcm7425-ohci", "generic-ohci"; |
| reg = <0x480400 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <67>; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@480500 { |
| compatible = "brcm,bcm7425-ehci", "generic-ehci"; |
| reg = <0x480500 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <66>; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@480600 { |
| compatible = "brcm,bcm7425-ohci", "generic-ohci"; |
| reg = <0x480600 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <68>; |
| status = "disabled"; |
| }; |
| |
| ehci2: usb@490300 { |
| compatible = "brcm,bcm7425-ehci", "generic-ehci"; |
| reg = <0x490300 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <70>; |
| status = "disabled"; |
| }; |
| |
| ohci2: usb@490400 { |
| compatible = "brcm,bcm7425-ohci", "generic-ohci"; |
| reg = <0x490400 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <72>; |
| status = "disabled"; |
| }; |
| |
| ehci3: usb@490500 { |
| compatible = "brcm,bcm7425-ehci", "generic-ehci"; |
| reg = <0x490500 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <71>; |
| status = "disabled"; |
| }; |
| |
| ohci3: usb@490600 { |
| compatible = "brcm,bcm7425-ohci", "generic-ohci"; |
| reg = <0x490600 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <73>; |
| status = "disabled"; |
| }; |
| |
| sata: sata@181000 { |
| compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; |
| reg-names = "ahci", "top-ctrl"; |
| reg = <0x181000 0xa9c>, <0x180020 0x1c>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <40>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| brcm,broken-ncq; |
| brcm,broken-phy; |
| status = "disabled"; |
| |
| sata0: sata-port@0 { |
| reg = <0>; |
| phys = <&sata_phy0>; |
| }; |
| |
| sata1: sata-port@1 { |
| reg = <1>; |
| phys = <&sata_phy1>; |
| }; |
| }; |
| |
| sata_phy: sata-phy@1800000 { |
| compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; |
| reg = <0x180100 0x0eff>; |
| reg-names = "phy"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata_phy0: sata-phy@0 { |
| reg = <0>; |
| #phy-cells = <0>; |
| }; |
| |
| sata_phy1: sata-phy@1 { |
| reg = <1>; |
| #phy-cells = <0>; |
| }; |
| }; |
| }; |
| }; |
