| /* |
| * Xilinx Test Pattern Generator |
| * |
| * Copyright (C) 2013-2015 Ideas on Board |
| * Copyright (C) 2013-2015 Xilinx, Inc. |
| * |
| * Contacts: Hyun Kwon <hyun.kwon@xilinx.com> |
| * Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/xilinx-v4l2-controls.h> |
| |
| #include <media/v4l2-async.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-subdev.h> |
| |
| #include "xilinx-vip.h" |
| #include "xilinx-vtc.h" |
| |
| #define XTPG_CTRL_STATUS_SLAVE_ERROR (1 << 16) |
| #define XTPG_CTRL_IRQ_SLAVE_ERROR (1 << 16) |
| |
| #define XTPG_PATTERN_CONTROL 0x0100 |
| #define XTPG_PATTERN_MASK (0xf << 0) |
| #define XTPG_PATTERN_CONTROL_CROSS_HAIRS (1 << 4) |
| #define XTPG_PATTERN_CONTROL_MOVING_BOX (1 << 5) |
| #define XTPG_PATTERN_CONTROL_COLOR_MASK_SHIFT 6 |
| #define XTPG_PATTERN_CONTROL_COLOR_MASK_MASK (0xf << 6) |
| #define XTPG_PATTERN_CONTROL_STUCK_PIXEL (1 << 9) |
| #define XTPG_PATTERN_CONTROL_NOISE (1 << 10) |
| #define XTPG_PATTERN_CONTROL_MOTION (1 << 12) |
| #define XTPG_MOTION_SPEED 0x0104 |
| #define XTPG_CROSS_HAIRS 0x0108 |
| #define XTPG_CROSS_HAIRS_ROW_SHIFT 0 |
| #define XTPG_CROSS_HAIRS_ROW_MASK (0xfff << 0) |
| #define XTPG_CROSS_HAIRS_COLUMN_SHIFT 16 |
| #define XTPG_CROSS_HAIRS_COLUMN_MASK (0xfff << 16) |
| #define XTPG_ZPLATE_HOR_CONTROL 0x010c |
| #define XTPG_ZPLATE_VER_CONTROL 0x0110 |
| #define XTPG_ZPLATE_START_SHIFT 0 |
| #define XTPG_ZPLATE_START_MASK (0xffff << 0) |
| #define XTPG_ZPLATE_SPEED_SHIFT 16 |
| #define XTPG_ZPLATE_SPEED_MASK (0xffff << 16) |
| #define XTPG_BOX_SIZE 0x0114 |
| #define XTPG_BOX_COLOR 0x0118 |
| #define XTPG_STUCK_PIXEL_THRESH 0x011c |
| #define XTPG_NOISE_GAIN 0x0120 |
| #define XTPG_BAYER_PHASE 0x0124 |
| #define XTPG_BAYER_PHASE_RGGB 0 |
| #define XTPG_BAYER_PHASE_GRBG 1 |
| #define XTPG_BAYER_PHASE_GBRG 2 |
| #define XTPG_BAYER_PHASE_BGGR 3 |
| #define XTPG_BAYER_PHASE_OFF 4 |
| |
| /* |
| * The minimum blanking value is one clock cycle for the front porch, one clock |
| * cycle for the sync pulse and one clock cycle for the back porch. |
| */ |
| #define XTPG_MIN_HBLANK 3 |
| #define XTPG_MAX_HBLANK (XVTC_MAX_HSIZE - XVIP_MIN_WIDTH) |
| #define XTPG_MIN_VBLANK 3 |
| #define XTPG_MAX_VBLANK (XVTC_MAX_VSIZE - XVIP_MIN_HEIGHT) |
| |
| /** |
| * struct xtpg_device - Xilinx Test Pattern Generator device structure |
| * @xvip: Xilinx Video IP device |
| * @pads: media pads |
| * @npads: number of pads (1 or 2) |
| * @has_input: whether an input is connected to the sink pad |
| * @formats: active V4L2 media bus format for each pad |
| * @default_format: default V4L2 media bus format |
| * @vip_format: format information corresponding to the active format |
| * @bayer: boolean flag if TPG is set to any bayer format |
| * @ctrl_handler: control handler |
| * @hblank: horizontal blanking control |
| * @vblank: vertical blanking control |
| * @pattern: test pattern control |
| * @streaming: is the video stream active |
| * @vtc: video timing controller |
| * @vtmux_gpio: video timing mux GPIO |
| */ |
| struct xtpg_device { |
| struct xvip_device xvip; |
| |
| struct media_pad pads[2]; |
| unsigned int npads; |
| bool has_input; |
| |
| struct v4l2_mbus_framefmt formats[2]; |
| struct v4l2_mbus_framefmt default_format; |
| const struct xvip_video_format *vip_format; |
| bool bayer; |
| |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct v4l2_ctrl *hblank; |
| struct v4l2_ctrl *vblank; |
| struct v4l2_ctrl *pattern; |
| bool streaming; |
| |
| struct xvtc_device *vtc; |
| struct gpio_desc *vtmux_gpio; |
| }; |
| |
| static inline struct xtpg_device *to_tpg(struct v4l2_subdev *subdev) |
| { |
| return container_of(subdev, struct xtpg_device, xvip.subdev); |
| } |
| |
| static u32 xtpg_get_bayer_phase(unsigned int code) |
| { |
| switch (code) { |
| case MEDIA_BUS_FMT_SRGGB8_1X8: |
| return XTPG_BAYER_PHASE_RGGB; |
| case MEDIA_BUS_FMT_SGRBG8_1X8: |
| return XTPG_BAYER_PHASE_GRBG; |
| case MEDIA_BUS_FMT_SGBRG8_1X8: |
| return XTPG_BAYER_PHASE_GBRG; |
| case MEDIA_BUS_FMT_SBGGR8_1X8: |
| return XTPG_BAYER_PHASE_BGGR; |
| default: |
| return XTPG_BAYER_PHASE_OFF; |
| } |
| } |
| |
| static void __xtpg_update_pattern_control(struct xtpg_device *xtpg, |
| bool passthrough, bool pattern) |
| { |
| u32 pattern_mask = (1 << (xtpg->pattern->maximum + 1)) - 1; |
| |
| /* |
| * If the TPG has no sink pad or no input connected to its sink pad |
| * passthrough mode can't be enabled. |
| */ |
| if (xtpg->npads == 1 || !xtpg->has_input) |
| passthrough = false; |
| |
| /* If passthrough mode is allowed unmask bit 0. */ |
| if (passthrough) |
| pattern_mask &= ~1; |
| |
| /* If test pattern mode is allowed unmask all other bits. */ |
| if (pattern) |
| pattern_mask &= 1; |
| |
| __v4l2_ctrl_modify_range(xtpg->pattern, 0, xtpg->pattern->maximum, |
| pattern_mask, pattern ? 9 : 0); |
| } |
| |
| static void xtpg_update_pattern_control(struct xtpg_device *xtpg, |
| bool passthrough, bool pattern) |
| { |
| mutex_lock(xtpg->ctrl_handler.lock); |
| __xtpg_update_pattern_control(xtpg, passthrough, pattern); |
| mutex_unlock(xtpg->ctrl_handler.lock); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Video Operations |
| */ |
| |
| static int xtpg_s_stream(struct v4l2_subdev *subdev, int enable) |
| { |
| struct xtpg_device *xtpg = to_tpg(subdev); |
| unsigned int width = xtpg->formats[0].width; |
| unsigned int height = xtpg->formats[0].height; |
| bool passthrough; |
| u32 bayer_phase; |
| |
| if (!enable) { |
| xvip_stop(&xtpg->xvip); |
| if (xtpg->vtc) |
| xvtc_generator_stop(xtpg->vtc); |
| |
| xtpg_update_pattern_control(xtpg, true, true); |
| xtpg->streaming = false; |
| return 0; |
| } |
| |
| xvip_set_frame_size(&xtpg->xvip, &xtpg->formats[0]); |
| |
| if (xtpg->vtc) { |
| struct xvtc_config config = { |
| .hblank_start = width, |
| .hsync_start = width + 1, |
| .vblank_start = height, |
| .vsync_start = height + 1, |
| }; |
| unsigned int htotal; |
| unsigned int vtotal; |
| |
| htotal = min_t(unsigned int, XVTC_MAX_HSIZE, |
| v4l2_ctrl_g_ctrl(xtpg->hblank) + width); |
| vtotal = min_t(unsigned int, XVTC_MAX_VSIZE, |
| v4l2_ctrl_g_ctrl(xtpg->vblank) + height); |
| |
| config.hsync_end = htotal - 1; |
| config.hsize = htotal; |
| config.vsync_end = vtotal - 1; |
| config.vsize = vtotal; |
| |
| xvtc_generator_start(xtpg->vtc, &config); |
| } |
| |
| /* |
| * Configure the bayer phase and video timing mux based on the |
| * operation mode (passthrough or test pattern generation). The test |
| * pattern can be modified by the control set handler, we thus need to |
| * take the control lock here to avoid races. |
| */ |
| mutex_lock(xtpg->ctrl_handler.lock); |
| |
| xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, |
| XTPG_PATTERN_MASK, xtpg->pattern->cur.val); |
| |
| /* |
| * Switching between passthrough and test pattern generation modes isn't |
| * allowed during streaming, update the control range accordingly. |
| */ |
| passthrough = xtpg->pattern->cur.val == 0; |
| __xtpg_update_pattern_control(xtpg, passthrough, !passthrough); |
| |
| xtpg->streaming = true; |
| |
| mutex_unlock(xtpg->ctrl_handler.lock); |
| |
| /* |
| * For TPG v5.0, the bayer phase needs to be off for the pass through |
| * mode, otherwise the external input would be subsampled. |
| */ |
| bayer_phase = passthrough ? XTPG_BAYER_PHASE_OFF |
| : xtpg_get_bayer_phase(xtpg->formats[0].code); |
| xvip_write(&xtpg->xvip, XTPG_BAYER_PHASE, bayer_phase); |
| |
| if (xtpg->vtmux_gpio) |
| gpiod_set_value_cansleep(xtpg->vtmux_gpio, !passthrough); |
| |
| xvip_start(&xtpg->xvip); |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Pad Operations |
| */ |
| |
| static struct v4l2_mbus_framefmt * |
| __xtpg_get_pad_format(struct xtpg_device *xtpg, |
| struct v4l2_subdev_pad_config *cfg, |
| unsigned int pad, u32 which) |
| { |
| switch (which) { |
| case V4L2_SUBDEV_FORMAT_TRY: |
| return v4l2_subdev_get_try_format(&xtpg->xvip.subdev, cfg, pad); |
| case V4L2_SUBDEV_FORMAT_ACTIVE: |
| return &xtpg->formats[pad]; |
| default: |
| return NULL; |
| } |
| } |
| |
| static int xtpg_get_format(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct xtpg_device *xtpg = to_tpg(subdev); |
| |
| fmt->format = *__xtpg_get_pad_format(xtpg, cfg, fmt->pad, fmt->which); |
| |
| return 0; |
| } |
| |
| static int xtpg_set_format(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct xtpg_device *xtpg = to_tpg(subdev); |
| struct v4l2_mbus_framefmt *__format; |
| u32 bayer_phase; |
| |
| __format = __xtpg_get_pad_format(xtpg, cfg, fmt->pad, fmt->which); |
| |
| /* In two pads mode the source pad format is always identical to the |
| * sink pad format. |
| */ |
| if (xtpg->npads == 2 && fmt->pad == 1) { |
| fmt->format = *__format; |
| return 0; |
| } |
| |
| /* Bayer phase is configurable at runtime */ |
| if (xtpg->bayer) { |
| bayer_phase = xtpg_get_bayer_phase(fmt->format.code); |
| if (bayer_phase != XTPG_BAYER_PHASE_OFF) |
| __format->code = fmt->format.code; |
| } |
| |
| xvip_set_format_size(__format, fmt); |
| |
| fmt->format = *__format; |
| |
| /* Propagate the format to the source pad. */ |
| if (xtpg->npads == 2) { |
| __format = __xtpg_get_pad_format(xtpg, cfg, 1, fmt->which); |
| *__format = fmt->format; |
| } |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * V4L2 Subdevice Operations |
| */ |
| |
| static int xtpg_enum_frame_size(struct v4l2_subdev *subdev, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_frame_size_enum *fse) |
| { |
| struct v4l2_mbus_framefmt *format; |
| |
| format = v4l2_subdev_get_try_format(subdev, cfg, fse->pad); |
| |
| if (fse->index || fse->code != format->code) |
| return -EINVAL; |
| |
| /* Min / max values for pad 0 is always fixed in both one and two pads |
| * modes. In two pads mode, the source pad(= 1) size is identical to |
| * the sink pad size */ |
| if (fse->pad == 0) { |
| fse->min_width = XVIP_MIN_WIDTH; |
| fse->max_width = XVIP_MAX_WIDTH; |
| fse->min_height = XVIP_MIN_HEIGHT; |
| fse->max_height = XVIP_MAX_HEIGHT; |
| } else { |
| fse->min_width = format->width; |
| fse->max_width = format->width; |
| fse->min_height = format->height; |
| fse->max_height = format->height; |
| } |
| |
| return 0; |
| } |
| |
| static int xtpg_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) |
| { |
| struct xtpg_device *xtpg = to_tpg(subdev); |
| struct v4l2_mbus_framefmt *format; |
| |
| format = v4l2_subdev_get_try_format(subdev, fh->pad, 0); |
| *format = xtpg->default_format; |
| |
| if (xtpg->npads == 2) { |
| format = v4l2_subdev_get_try_format(subdev, fh->pad, 1); |
| *format = xtpg->default_format; |
| } |
| |
| return 0; |
| } |
| |
| static int xtpg_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) |
| { |
| return 0; |
| } |
| |
| static int xtpg_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct xtpg_device *xtpg = container_of(ctrl->handler, |
| struct xtpg_device, |
| ctrl_handler); |
| switch (ctrl->id) { |
| case V4L2_CID_TEST_PATTERN: |
| xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, |
| XTPG_PATTERN_MASK, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_CROSS_HAIRS: |
| xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, |
| XTPG_PATTERN_CONTROL_CROSS_HAIRS, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_MOVING_BOX: |
| xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, |
| XTPG_PATTERN_CONTROL_MOVING_BOX, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_COLOR_MASK: |
| xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, |
| XTPG_PATTERN_CONTROL_COLOR_MASK_MASK, |
| ctrl->val << |
| XTPG_PATTERN_CONTROL_COLOR_MASK_SHIFT); |
| return 0; |
| case V4L2_CID_XILINX_TPG_STUCK_PIXEL: |
| xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, |
| XTPG_PATTERN_CONTROL_STUCK_PIXEL, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_NOISE: |
| xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, |
| XTPG_PATTERN_CONTROL_NOISE, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_MOTION: |
| xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, |
| XTPG_PATTERN_CONTROL_MOTION, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_MOTION_SPEED: |
| xvip_write(&xtpg->xvip, XTPG_MOTION_SPEED, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW: |
| xvip_clr_and_set(&xtpg->xvip, XTPG_CROSS_HAIRS, |
| XTPG_CROSS_HAIRS_ROW_MASK, |
| ctrl->val << XTPG_CROSS_HAIRS_ROW_SHIFT); |
| return 0; |
| case V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN: |
| xvip_clr_and_set(&xtpg->xvip, XTPG_CROSS_HAIRS, |
| XTPG_CROSS_HAIRS_COLUMN_MASK, |
| ctrl->val << XTPG_CROSS_HAIRS_COLUMN_SHIFT); |
| return 0; |
| case V4L2_CID_XILINX_TPG_ZPLATE_HOR_START: |
| xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_HOR_CONTROL, |
| XTPG_ZPLATE_START_MASK, |
| ctrl->val << XTPG_ZPLATE_START_SHIFT); |
| return 0; |
| case V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED: |
| xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_HOR_CONTROL, |
| XTPG_ZPLATE_SPEED_MASK, |
| ctrl->val << XTPG_ZPLATE_SPEED_SHIFT); |
| return 0; |
| case V4L2_CID_XILINX_TPG_ZPLATE_VER_START: |
| xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_VER_CONTROL, |
| XTPG_ZPLATE_START_MASK, |
| ctrl->val << XTPG_ZPLATE_START_SHIFT); |
| return 0; |
| case V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED: |
| xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_VER_CONTROL, |
| XTPG_ZPLATE_SPEED_MASK, |
| ctrl->val << XTPG_ZPLATE_SPEED_SHIFT); |
| return 0; |
| case V4L2_CID_XILINX_TPG_BOX_SIZE: |
| xvip_write(&xtpg->xvip, XTPG_BOX_SIZE, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_BOX_COLOR: |
| xvip_write(&xtpg->xvip, XTPG_BOX_COLOR, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH: |
| xvip_write(&xtpg->xvip, XTPG_STUCK_PIXEL_THRESH, ctrl->val); |
| return 0; |
| case V4L2_CID_XILINX_TPG_NOISE_GAIN: |
| xvip_write(&xtpg->xvip, XTPG_NOISE_GAIN, ctrl->val); |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| static const struct v4l2_ctrl_ops xtpg_ctrl_ops = { |
| .s_ctrl = xtpg_s_ctrl, |
| }; |
| |
| static struct v4l2_subdev_core_ops xtpg_core_ops = { |
| }; |
| |
| static struct v4l2_subdev_video_ops xtpg_video_ops = { |
| .s_stream = xtpg_s_stream, |
| }; |
| |
| static struct v4l2_subdev_pad_ops xtpg_pad_ops = { |
| .enum_mbus_code = xvip_enum_mbus_code, |
| .enum_frame_size = xtpg_enum_frame_size, |
| .get_fmt = xtpg_get_format, |
| .set_fmt = xtpg_set_format, |
| }; |
| |
| static struct v4l2_subdev_ops xtpg_ops = { |
| .core = &xtpg_core_ops, |
| .video = &xtpg_video_ops, |
| .pad = &xtpg_pad_ops, |
| }; |
| |
| static const struct v4l2_subdev_internal_ops xtpg_internal_ops = { |
| .open = xtpg_open, |
| .close = xtpg_close, |
| }; |
| |
| /* |
| * Control Config |
| */ |
| |
| static const char *const xtpg_pattern_strings[] = { |
| "Passthrough", |
| "Horizontal Ramp", |
| "Vertical Ramp", |
| "Temporal Ramp", |
| "Solid Red", |
| "Solid Green", |
| "Solid Blue", |
| "Solid Black", |
| "Solid White", |
| "Color Bars", |
| "Zone Plate", |
| "Tartan Color Bars", |
| "Cross Hatch", |
| "None", |
| "Vertical/Horizontal Ramps", |
| "Black/White Checker Board", |
| }; |
| |
| static struct v4l2_ctrl_config xtpg_ctrls[] = { |
| { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_CROSS_HAIRS, |
| .name = "Test Pattern: Cross Hairs", |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .min = false, |
| .max = true, |
| .step = 1, |
| .def = 0, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_MOVING_BOX, |
| .name = "Test Pattern: Moving Box", |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .min = false, |
| .max = true, |
| .step = 1, |
| .def = 0, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_COLOR_MASK, |
| .name = "Test Pattern: Color Mask", |
| .type = V4L2_CTRL_TYPE_BITMASK, |
| .min = 0, |
| .max = 0xf, |
| .def = 0, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_STUCK_PIXEL, |
| .name = "Test Pattern: Stuck Pixel", |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .min = false, |
| .max = true, |
| .step = 1, |
| .def = 0, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_NOISE, |
| .name = "Test Pattern: Noise", |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .min = false, |
| .max = true, |
| .step = 1, |
| .def = 0, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_MOTION, |
| .name = "Test Pattern: Motion", |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .min = false, |
| .max = true, |
| .step = 1, |
| .def = 0, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_MOTION_SPEED, |
| .name = "Test Pattern: Motion Speed", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 8) - 1, |
| .step = 1, |
| .def = 4, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW, |
| .name = "Test Pattern: Cross Hairs Row", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 12) - 1, |
| .step = 1, |
| .def = 0x64, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN, |
| .name = "Test Pattern: Cross Hairs Column", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 12) - 1, |
| .step = 1, |
| .def = 0x64, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_ZPLATE_HOR_START, |
| .name = "Test Pattern: Zplate Horizontal Start Pos", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 16) - 1, |
| .step = 1, |
| .def = 0x1e, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED, |
| .name = "Test Pattern: Zplate Horizontal Speed", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 16) - 1, |
| .step = 1, |
| .def = 0, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_ZPLATE_VER_START, |
| .name = "Test Pattern: Zplate Vertical Start Pos", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 16) - 1, |
| .step = 1, |
| .def = 1, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED, |
| .name = "Test Pattern: Zplate Vertical Speed", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 16) - 1, |
| .step = 1, |
| .def = 0, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_BOX_SIZE, |
| .name = "Test Pattern: Box Size", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 12) - 1, |
| .step = 1, |
| .def = 0x32, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_BOX_COLOR, |
| .name = "Test Pattern: Box Color(RGB)", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 24) - 1, |
| .step = 1, |
| .def = 0, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH, |
| .name = "Test Pattern: Stuck Pixel threshold", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 16) - 1, |
| .step = 1, |
| .def = 0, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .ops = &xtpg_ctrl_ops, |
| .id = V4L2_CID_XILINX_TPG_NOISE_GAIN, |
| .name = "Test Pattern: Noise Gain", |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .min = 0, |
| .max = (1 << 8) - 1, |
| .step = 1, |
| .def = 0, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Media Operations |
| */ |
| |
| static const struct media_entity_operations xtpg_media_ops = { |
| .link_validate = v4l2_subdev_link_validate, |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Power Management |
| */ |
| |
| static int __maybe_unused xtpg_pm_suspend(struct device *dev) |
| { |
| struct xtpg_device *xtpg = dev_get_drvdata(dev); |
| |
| xvip_suspend(&xtpg->xvip); |
| |
| return 0; |
| } |
| |
| static int __maybe_unused xtpg_pm_resume(struct device *dev) |
| { |
| struct xtpg_device *xtpg = dev_get_drvdata(dev); |
| |
| xvip_resume(&xtpg->xvip); |
| |
| return 0; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Platform Device Driver |
| */ |
| |
| static int xtpg_parse_of(struct xtpg_device *xtpg) |
| { |
| struct device *dev = xtpg->xvip.dev; |
| struct device_node *node = xtpg->xvip.dev->of_node; |
| struct device_node *ports; |
| struct device_node *port; |
| unsigned int nports = 0; |
| bool has_endpoint = false; |
| |
| ports = of_get_child_by_name(node, "ports"); |
| if (ports == NULL) |
| ports = node; |
| |
| for_each_child_of_node(ports, port) { |
| const struct xvip_video_format *format; |
| struct device_node *endpoint; |
| |
| if (!port->name || of_node_cmp(port->name, "port")) |
| continue; |
| |
| format = xvip_of_get_format(port); |
| if (IS_ERR(format)) { |
| dev_err(dev, "invalid format in DT"); |
| return PTR_ERR(format); |
| } |
| |
| /* Get and check the format description */ |
| if (!xtpg->vip_format) { |
| xtpg->vip_format = format; |
| } else if (xtpg->vip_format != format) { |
| dev_err(dev, "in/out format mismatch in DT"); |
| return -EINVAL; |
| } |
| |
| if (nports == 0) { |
| endpoint = of_get_next_child(port, NULL); |
| if (endpoint) |
| has_endpoint = true; |
| of_node_put(endpoint); |
| } |
| |
| /* Count the number of ports. */ |
| nports++; |
| } |
| |
| if (nports != 1 && nports != 2) { |
| dev_err(dev, "invalid number of ports %u\n", nports); |
| return -EINVAL; |
| } |
| |
| xtpg->npads = nports; |
| if (nports == 2 && has_endpoint) |
| xtpg->has_input = true; |
| |
| return 0; |
| } |
| |
| static int xtpg_probe(struct platform_device *pdev) |
| { |
| struct v4l2_subdev *subdev; |
| struct xtpg_device *xtpg; |
| u32 i, bayer_phase; |
| int ret; |
| |
| xtpg = devm_kzalloc(&pdev->dev, sizeof(*xtpg), GFP_KERNEL); |
| if (!xtpg) |
| return -ENOMEM; |
| |
| xtpg->xvip.dev = &pdev->dev; |
| |
| ret = xtpg_parse_of(xtpg); |
| if (ret < 0) |
| return ret; |
| |
| ret = xvip_init_resources(&xtpg->xvip); |
| if (ret < 0) |
| return ret; |
| |
| xtpg->vtmux_gpio = devm_gpiod_get_optional(&pdev->dev, "timing", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(xtpg->vtmux_gpio)) { |
| ret = PTR_ERR(xtpg->vtmux_gpio); |
| goto error_resource; |
| } |
| |
| xtpg->vtc = xvtc_of_get(pdev->dev.of_node); |
| if (IS_ERR(xtpg->vtc)) { |
| ret = PTR_ERR(xtpg->vtc); |
| goto error_resource; |
| } |
| |
| /* Reset and initialize the core */ |
| xvip_reset(&xtpg->xvip); |
| |
| /* Initialize V4L2 subdevice and media entity. Pad numbers depend on the |
| * number of pads. |
| */ |
| if (xtpg->npads == 2) { |
| xtpg->pads[0].flags = MEDIA_PAD_FL_SINK; |
| xtpg->pads[1].flags = MEDIA_PAD_FL_SOURCE; |
| } else { |
| xtpg->pads[0].flags = MEDIA_PAD_FL_SOURCE; |
| } |
| |
| /* Initialize the default format */ |
| xtpg->default_format.code = xtpg->vip_format->code; |
| xtpg->default_format.field = V4L2_FIELD_NONE; |
| xtpg->default_format.colorspace = V4L2_COLORSPACE_SRGB; |
| xvip_get_frame_size(&xtpg->xvip, &xtpg->default_format); |
| |
| bayer_phase = xtpg_get_bayer_phase(xtpg->vip_format->code); |
| if (bayer_phase != XTPG_BAYER_PHASE_OFF) |
| xtpg->bayer = true; |
| |
| xtpg->formats[0] = xtpg->default_format; |
| if (xtpg->npads == 2) |
| xtpg->formats[1] = xtpg->default_format; |
| |
| /* Initialize V4L2 subdevice and media entity */ |
| subdev = &xtpg->xvip.subdev; |
| v4l2_subdev_init(subdev, &xtpg_ops); |
| subdev->dev = &pdev->dev; |
| subdev->internal_ops = &xtpg_internal_ops; |
| strlcpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name)); |
| v4l2_set_subdevdata(subdev, xtpg); |
| subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| subdev->entity.ops = &xtpg_media_ops; |
| |
| ret = media_entity_init(&subdev->entity, xtpg->npads, xtpg->pads, 0); |
| if (ret < 0) |
| goto error; |
| |
| v4l2_ctrl_handler_init(&xtpg->ctrl_handler, 3 + ARRAY_SIZE(xtpg_ctrls)); |
| |
| xtpg->vblank = v4l2_ctrl_new_std(&xtpg->ctrl_handler, &xtpg_ctrl_ops, |
| V4L2_CID_VBLANK, XTPG_MIN_VBLANK, |
| XTPG_MAX_VBLANK, 1, 100); |
| xtpg->hblank = v4l2_ctrl_new_std(&xtpg->ctrl_handler, &xtpg_ctrl_ops, |
| V4L2_CID_HBLANK, XTPG_MIN_HBLANK, |
| XTPG_MAX_HBLANK, 1, 100); |
| xtpg->pattern = v4l2_ctrl_new_std_menu_items(&xtpg->ctrl_handler, |
| &xtpg_ctrl_ops, V4L2_CID_TEST_PATTERN, |
| ARRAY_SIZE(xtpg_pattern_strings) - 1, |
| 1, 9, xtpg_pattern_strings); |
| |
| for (i = 0; i < ARRAY_SIZE(xtpg_ctrls); i++) |
| v4l2_ctrl_new_custom(&xtpg->ctrl_handler, &xtpg_ctrls[i], NULL); |
| |
| if (xtpg->ctrl_handler.error) { |
| dev_err(&pdev->dev, "failed to add controls\n"); |
| ret = xtpg->ctrl_handler.error; |
| goto error; |
| } |
| subdev->ctrl_handler = &xtpg->ctrl_handler; |
| |
| xtpg_update_pattern_control(xtpg, true, true); |
| |
| ret = v4l2_ctrl_handler_setup(&xtpg->ctrl_handler); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to set controls\n"); |
| goto error; |
| } |
| |
| platform_set_drvdata(pdev, xtpg); |
| |
| xvip_print_version(&xtpg->xvip); |
| |
| ret = v4l2_async_register_subdev(subdev); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to register subdev\n"); |
| goto error; |
| } |
| |
| return 0; |
| |
| error: |
| v4l2_ctrl_handler_free(&xtpg->ctrl_handler); |
| media_entity_cleanup(&subdev->entity); |
| xvtc_put(xtpg->vtc); |
| error_resource: |
| xvip_cleanup_resources(&xtpg->xvip); |
| return ret; |
| } |
| |
| static int xtpg_remove(struct platform_device *pdev) |
| { |
| struct xtpg_device *xtpg = platform_get_drvdata(pdev); |
| struct v4l2_subdev *subdev = &xtpg->xvip.subdev; |
| |
| v4l2_async_unregister_subdev(subdev); |
| v4l2_ctrl_handler_free(&xtpg->ctrl_handler); |
| media_entity_cleanup(&subdev->entity); |
| |
| xvip_cleanup_resources(&xtpg->xvip); |
| |
| return 0; |
| } |
| |
| static SIMPLE_DEV_PM_OPS(xtpg_pm_ops, xtpg_pm_suspend, xtpg_pm_resume); |
| |
| static const struct of_device_id xtpg_of_id_table[] = { |
| { .compatible = "xlnx,v-tpg-5.0" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, xtpg_of_id_table); |
| |
| static struct platform_driver xtpg_driver = { |
| .driver = { |
| .name = "xilinx-tpg", |
| .pm = &xtpg_pm_ops, |
| .of_match_table = xtpg_of_id_table, |
| }, |
| .probe = xtpg_probe, |
| .remove = xtpg_remove, |
| }; |
| |
| module_platform_driver(xtpg_driver); |
| |
| MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); |
| MODULE_DESCRIPTION("Xilinx Test Pattern Generator Driver"); |
| MODULE_LICENSE("GPL v2"); |