| * Freescale Display Interface Unit |
| |
| The Freescale DIU is a LCD controller, with proper hardware, it can also |
| drive DVI monitors. |
| |
| Required properties: |
| - compatible : should be "fsl,diu" or "fsl,mpc5121-diu". |
| - reg : should contain at least address and length of the DIU register |
| set. |
| - interrupts : one DIU interrupt should be described here. |
| - interrupt-parent : the phandle for the interrupt controller that |
| services interrupts for this device. |
| |
| Optional properties: |
| - edid : verbatim EDID data block describing attached display. |
| Data from the detailed timing descriptor will be used to |
| program the display controller. |
| |
| Example (MPC8610HPCD): |
| display@2c000 { |
| compatible = "fsl,diu"; |
| reg = <0x2c000 100>; |
| interrupts = <72 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| Example for MPC5121: |
| display@2100 { |
| compatible = "fsl,mpc5121-diu"; |
| reg = <0x2100 0x100>; |
| interrupts = <64 0x8>; |
| interrupt-parent = <&ipic>; |
| edid = [edid-data]; |
| }; |
