blob: e80e42163883610005287282d9673c80377b6ce4 [file] [log] [blame]
/*
* Copyright 2011 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "ste-dbx5x0.dtsi"
#include "ste-href-ab8500.dtsi"
#include "ste-href-family-pinctrl.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
/* This stablilizes the serial port enumeration */
aliases {
serial0 = &ux500_serial0;
serial1 = &ux500_serial1;
serial2 = &ux500_serial2;
};
memory {
reg = <0x00000000 0x20000000>;
};
en_3v3_reg: en_3v3 {
compatible = "regulator-fixed";
regulator-name = "en-3v3-fixed-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
gpio = <&ab8500_gpio 25 0x4>;
startup-delay-us = <5000>;
enable-active-high;
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
button@1 {
debounce_interval = <50>;
wakeup-source;
linux,code = <2>;
label = "userpb";
gpios = <&gpio1 0 0x4>;
};
button@2 {
debounce_interval = <50>;
wakeup-source;
linux,code = <3>;
label = "extkb1";
gpios = <&gpio4 23 0x4>;
};
button@3 {
debounce_interval = <50>;
wakeup-source;
linux,code = <4>;
label = "extkb2";
gpios = <&gpio4 24 0x4>;
};
button@4 {
debounce_interval = <50>;
wakeup-source;
linux,code = <5>;
label = "extkb3";
gpios = <&gpio5 1 0x4>;
};
button@5 {
debounce_interval = <50>;
wakeup-source;
linux,code = <6>;
label = "extkb4";
gpios = <&gpio5 2 0x4>;
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&gpioled_snowball_mode>;
used-led {
label = "user_led";
gpios = <&gpio4 14 0x4>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
};
soc {
usb_per5@a03e0000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&musb_default_mode>;
pinctrl-1 = <&musb_sleep_mode>;
};
sound {
compatible = "stericsson,snd-soc-mop500";
stericsson,cpu-dai = <&msp1 &msp3>;
stericsson,audio-codec = <&codec>;
};
msp0: msp@80123000 {
pinctrl-names = "default";
pinctrl-0 = <&msp0_default_mode>;
status = "okay";
};
msp1: msp@80124000 {
pinctrl-names = "default";
pinctrl-0 = <&msp1_default_mode>;
status = "okay";
};
msp2: msp@80117000 {
pinctrl-names = "default";
pinctrl-0 = <&msp2_default_mode>;
};
msp3: msp@80125000 {
status = "okay";
};
external-bus@50000000 {
status = "okay";
ethernet@0 {
compatible = "smsc,lan9115";
reg = <0 0x10000>;
interrupts = <12 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gpio4>;
vdd33a-supply = <&en_3v3_reg>;
vddvario-supply = <&db8500_vape_reg>;
pinctrl-names = "default";
pinctrl-0 = <&eth_snowball_mode>;
reg-shift = <1>;
reg-io-width = <2>;
smsc,force-internal-phy;
smsc,irq-active-high;
smsc,irq-push-pull;
clocks = <&prcc_pclk 3 0>;
};
};
vmmci: regulator-gpio {
compatible = "regulator-gpio";
gpios = <&gpio7 4 0x4>;
enable-gpio = <&gpio6 25 0x4>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2900000>;
regulator-name = "mmci-reg";
regulator-type = "voltage";
startup-delay-us = <100>;
enable-active-high;
states = <1800000 0x1
2900000 0x0>;
};
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
vqmmc-supply = <&vmmci>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi0_default_mode>;
pinctrl-1 = <&sdi0_sleep_mode>;
cd-gpios = <&gpio6 26 0x4>; // 218
cd-inverted;
status = "okay";
};
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi1_default_mode>;
pinctrl-1 = <&sdi1_sleep_mode>;
status = "okay";
};
// Unused PoP eMMC - register and put it to sleep by default */
sdi2_per3@80005000 {
arm,primecell-periphid = <0x10480180>;
pinctrl-names = "default";
pinctrl-0 = <&sdi2_sleep_mode>;
status = "okay";
};
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdi4_default_mode>;
pinctrl-1 = <&sdi4_sleep_mode>;
status = "okay";
};
uart@80120000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart0_default_mode>;
pinctrl-1 = <&uart0_sleep_mode>;
status = "okay";
};
/* This UART is unused and thus left disabled */
uart@80121000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart1_default_mode>;
pinctrl-1 = <&uart1_sleep_mode>;
};
uart@80007000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart2_default_mode>;
pinctrl-1 = <&uart2_sleep_mode>;
status = "okay";
};
i2c@80004000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c0_default_mode>;
pinctrl-1 = <&i2c0_sleep_mode>;
};
i2c@80122000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c1_default_mode>;
pinctrl-1 = <&i2c1_sleep_mode>;
};
i2c@80128000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c2_default_mode>;
pinctrl-1 = <&i2c2_sleep_mode>;
lsm303dlh@18 {
/* Accelerometer */
compatible = "st,lsm303dlh-accel";
st,drdy-int-pin = <1>;
reg = <0x18>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&accel_snowball_mode>;
interrupt-parent = <&gpio5>;
interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
<4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
};
lsm303dlh@1e {
/* Magnetometer */
compatible = "st,lsm303dlh-magn";
reg = <0x1e>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&magneto_snowball_mode>;
gpios = <&gpio5 5 0x4>; /* DRDY line */
};
l3g4200d@68 {
/* Gyroscope */
compatible = "st,l3g4200d-gyro";
st,drdy-int-pin = <2>;
reg = <0x68>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
pinctrl-names = "default";
pinctrl-0 = <&gyro_snowball_mode>;
gpios = <&gpio5 6 0x4>; /* DRDY line */
interrupt-parent = <&gpio5>;
interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
};
lsp001wm@5c {
/* Barometer/pressure sensor */
compatible = "st,lps001wp-press";
reg = <0x5c>;
vdd-supply = <&ab8500_ldo_aux1_reg>;
vddio-supply = <&db8500_vsmps2_reg>;
};
};
i2c@80110000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c3_default_mode>;
pinctrl-1 = <&i2c3_sleep_mode>;
};
ssp@80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
};
cpufreq-cooling {
status = "okay";
};
prcmu@80157000 {
cpufreq {
status = "okay";
};
thermal@801573c0 {
num-trips = <4>;
trip0-temp = <70000>;
trip0-type = "active";
trip0-cdev-num = <1>;
trip0-cdev-name0 = "thermal-cpufreq-0";
trip1-temp = <75000>;
trip1-type = "active";
trip1-cdev-num = <1>;
trip1-cdev-name0 = "thermal-cpufreq-0";
trip2-temp = <80000>;
trip2-type = "active";
trip2-cdev-num = <1>;
trip2-cdev-name0 = "thermal-cpufreq-0";
trip3-temp = <85000>;
trip3-type = "critical";
trip3-cdev-num = <0>;
status = "okay";
};
ab8500 {
ab8500-gpio {
compatible = "stericsson,ab8500-gpio";
};
ext_regulators: ab8500-ext-regulators {
ab8500_ext1_reg: ab8500_ext1 {
regulator-name = "ab8500-ext-supply1";
};
ab8500_ext2_reg_reg: ab8500_ext2 {
regulator-name = "ab8500-ext-supply2";
};
ab8500_ext3_reg_reg: ab8500_ext3 {
regulator-name = "ab8500-ext-supply3";
};
};
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
};
ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
regulator-name = "V-eMMC1";
};
ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
regulator-name = "V-MMC-SD";
};
ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
regulator-name = "V-INTCORE";
};
ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
regulator-name = "V-TVOUT";
};
ab8500_ldo_usb_reg: ab8500_ldo_usb {
regulator-name = "dummy";
};
ab8500_ldo_audio_reg: ab8500_ldo_audio {
regulator-name = "V-AUD";
};
ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
regulator-name = "V-AMIC1";
};
ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
regulator-name = "V-AMIC2";
};
ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
regulator-name = "V-DMIC";
};
ab8500_ldo_ana_reg: ab8500_ldo_ana {
regulator-name = "V-CSI/DSI";
};
};
};
};
pinctrl {
/*
* Set this up using hogs, as time goes by and as seems fit, these
* can be moved over to being controlled by respective device.
*/
pinctrl-names = "default";
pinctrl-0 = <&gbf_snowball_mode>,
<&wlan_snowball_mode>;
ethernet {
/*
* Mux in "SM" which is used for the
* SMSC911x Ethernet adapter
*/
eth_snowball_mode: eth_snowball {
snowball_mux {
function = "sm";
groups = "sm_b_1";
};
/* LAN IRQ pin */
snowball_cfg1 {
pins = "GPIO140_B11";
ste,config = <&in_nopull>;
};
/* LAN reset pin */
snowball_cfg2 {
pins = "GPIO141_C12";
ste,config = <&gpio_out_hi>;
};
};
};
sdi0 {
sdi0_default_mode: sdi0_default {
snowball_mux {
function = "mc0";
groups = "mc0dat31dir_a_1";
};
snowball_cfg1 {
pins = "GPIO21_AB3"; /* DAT31DIR */
ste,config = <&out_hi>;
};
/* SD card detect GPIO pin, extend default state */
snowball_cfg2 {
pins = "GPIO218_AH11";
ste,config = <&gpio_in_pu>;
};
/* VMMCI level-shifter enable */
snowball_cfg3 {
pins = "GPIO217_AH12";
ste,config = <&gpio_out_lo>;
};
/* VMMCI level-shifter voltage select */
snowball_cfg4 {
pins = "GPIO228_AJ6";
ste,config = <&gpio_out_hi>;
};
};
};
ssp0 {
ssp0_snowball_mode: ssp0_snowball_default {
snowball_mux {
function = "ssp0";
groups = "ssp0_a_1";
};
snowball_cfg1 {
pins = "GPIO144_B13"; /* FRM */
ste,config = <&gpio_out_hi>;
};
snowball_cfg2 {
pins = "GPIO145_C13"; /* RXD */
ste,config = <&in_pd>;
};
snowball_cfg3 {
pins =
"GPIO146_D13", /* TXD */
"GPIO143_D12"; /* CLK */
ste,config = <&out_lo>;
};
};
};
gpio_led {
gpioled_snowball_mode: gpioled_default {
snowball_cfg1 {
pins = "GPIO142_C11";
ste,config = <&gpio_out_hi>;
};
};
};
accelerometer {
accel_snowball_mode: accel_snowball {
/* Accelerometer lines */
snowball_cfg1 {
pins =
"GPIO163_C20", /* ACCEL_IRQ1 */
"GPIO164_B21"; /* ACCEL_IRQ2 */
ste,config = <&gpio_in_pu>;
};
};
};
gyro {
gyro_snowball_mode: gyro_snowball {
snowball_cfg1 {
pins =
"GPIO166_A22", /* DRDY */
"GPIO169_D22"; /* INT */
ste,config = <&gpio_in_pu>;
};
};
};
magnetometer {
magneto_snowball_mode: magneto_snowball {
snowball_cfg1 {
pins = "GPIO165_C21"; /* MAG_DRDY */
ste,config = <&gpio_in_pu>;
};
};
};
gbf {
gbf_snowball_mode: gbf_snowball {
/*
* GBF (GPS, Bluetooth, FM-radio) interface,
* pull low to reset state
*/
snowball_cfg1 {
pins = "GPIO171_D23"; /* GBF_ENA_RESET */
ste,config = <&gpio_out_lo>;
};
};
};
wlan {
wlan_snowball_mode: wlan_snowball {
/*
* Activate this mode with the WLAN chip.
* These are plain GPIO pins used by WLAN
*/
snowball_cfg1 {
pins =
"GPIO161_D21", /* WLAN_PMU_EN */
"GPIO215_AH13"; /* WLAN_ENA */
ste,config = <&gpio_out_lo>;
};
snowball_cfg2 {
pins = "GPIO216_AG12"; /* WLAN_IRQ */
ste,config = <&gpio_in_pu>;
};
};
};
};
mcde@a0350000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_default_mode>;
pinctrl-1 = <&lcd_sleep_mode>;
};
};
};