| /* |
| * Copyright (C) 2015 Cavium, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License |
| * as published by the Free Software Foundation. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/phy.h> |
| #include <linux/of.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| |
| #include "nic_reg.h" |
| #include "nic.h" |
| #include "thunder_bgx.h" |
| |
| #define DRV_NAME "thunder-BGX" |
| #define DRV_VERSION "1.0" |
| |
| struct lmac { |
| struct bgx *bgx; |
| int dmac; |
| u8 mac[ETH_ALEN]; |
| bool link_up; |
| int lmacid; /* ID within BGX */ |
| int lmacid_bd; /* ID on board */ |
| struct net_device netdev; |
| struct phy_device *phydev; |
| unsigned int last_duplex; |
| unsigned int last_link; |
| unsigned int last_speed; |
| bool is_sgmii; |
| struct delayed_work dwork; |
| struct workqueue_struct *check_link; |
| }; |
| |
| struct bgx { |
| u8 bgx_id; |
| u8 qlm_mode; |
| struct lmac lmac[MAX_LMAC_PER_BGX]; |
| int lmac_count; |
| int lmac_type; |
| int lane_to_sds; |
| int use_training; |
| void __iomem *reg_base; |
| struct pci_dev *pdev; |
| }; |
| |
| static struct bgx *bgx_vnic[MAX_BGX_THUNDER]; |
| static int lmac_count; /* Total no of LMACs in system */ |
| |
| static int bgx_xaui_check_link(struct lmac *lmac); |
| |
| /* Supported devices */ |
| static const struct pci_device_id bgx_id_table[] = { |
| { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_BGX) }, |
| { 0, } /* end of table */ |
| }; |
| |
| MODULE_AUTHOR("Cavium Inc"); |
| MODULE_DESCRIPTION("Cavium Thunder BGX/MAC Driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION(DRV_VERSION); |
| MODULE_DEVICE_TABLE(pci, bgx_id_table); |
| |
| /* The Cavium ThunderX network controller can *only* be found in SoCs |
| * containing the ThunderX ARM64 CPU implementation. All accesses to the device |
| * registers on this platform are implicitly strongly ordered with respect |
| * to memory accesses. So writeq_relaxed() and readq_relaxed() are safe to use |
| * with no memory barriers in this driver. The readq()/writeq() functions add |
| * explicit ordering operation which in this case are redundant, and only |
| * add overhead. |
| */ |
| |
| /* Register read/write APIs */ |
| static u64 bgx_reg_read(struct bgx *bgx, u8 lmac, u64 offset) |
| { |
| void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset; |
| |
| return readq_relaxed(addr); |
| } |
| |
| static void bgx_reg_write(struct bgx *bgx, u8 lmac, u64 offset, u64 val) |
| { |
| void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset; |
| |
| writeq_relaxed(val, addr); |
| } |
| |
| static void bgx_reg_modify(struct bgx *bgx, u8 lmac, u64 offset, u64 val) |
| { |
| void __iomem *addr = bgx->reg_base + ((u32)lmac << 20) + offset; |
| |
| writeq_relaxed(val | readq_relaxed(addr), addr); |
| } |
| |
| static int bgx_poll_reg(struct bgx *bgx, u8 lmac, u64 reg, u64 mask, bool zero) |
| { |
| int timeout = 100; |
| u64 reg_val; |
| |
| while (timeout) { |
| reg_val = bgx_reg_read(bgx, lmac, reg); |
| if (zero && !(reg_val & mask)) |
| return 0; |
| if (!zero && (reg_val & mask)) |
| return 0; |
| usleep_range(1000, 2000); |
| timeout--; |
| } |
| return 1; |
| } |
| |
| /* Return number of BGX present in HW */ |
| unsigned bgx_get_map(int node) |
| { |
| int i; |
| unsigned map = 0; |
| |
| for (i = 0; i < MAX_BGX_PER_CN88XX; i++) { |
| if (bgx_vnic[(node * MAX_BGX_PER_CN88XX) + i]) |
| map |= (1 << i); |
| } |
| |
| return map; |
| } |
| EXPORT_SYMBOL(bgx_get_map); |
| |
| /* Return number of LMAC configured for this BGX */ |
| int bgx_get_lmac_count(int node, int bgx_idx) |
| { |
| struct bgx *bgx; |
| |
| bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx]; |
| if (bgx) |
| return bgx->lmac_count; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(bgx_get_lmac_count); |
| |
| /* Returns the current link status of LMAC */ |
| void bgx_get_lmac_link_state(int node, int bgx_idx, int lmacid, void *status) |
| { |
| struct bgx_link_status *link = (struct bgx_link_status *)status; |
| struct bgx *bgx; |
| struct lmac *lmac; |
| |
| bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx]; |
| if (!bgx) |
| return; |
| |
| lmac = &bgx->lmac[lmacid]; |
| link->link_up = lmac->link_up; |
| link->duplex = lmac->last_duplex; |
| link->speed = lmac->last_speed; |
| } |
| EXPORT_SYMBOL(bgx_get_lmac_link_state); |
| |
| const u8 *bgx_get_lmac_mac(int node, int bgx_idx, int lmacid) |
| { |
| struct bgx *bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx]; |
| |
| if (bgx) |
| return bgx->lmac[lmacid].mac; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(bgx_get_lmac_mac); |
| |
| void bgx_set_lmac_mac(int node, int bgx_idx, int lmacid, const u8 *mac) |
| { |
| struct bgx *bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx]; |
| |
| if (!bgx) |
| return; |
| |
| ether_addr_copy(bgx->lmac[lmacid].mac, mac); |
| } |
| EXPORT_SYMBOL(bgx_set_lmac_mac); |
| |
| void bgx_lmac_rx_tx_enable(int node, int bgx_idx, int lmacid, bool enable) |
| { |
| struct bgx *bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx]; |
| u64 cfg; |
| |
| if (!bgx) |
| return; |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| if (enable) |
| cfg |= CMR_PKT_RX_EN | CMR_PKT_TX_EN; |
| else |
| cfg &= ~(CMR_PKT_RX_EN | CMR_PKT_TX_EN); |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| } |
| EXPORT_SYMBOL(bgx_lmac_rx_tx_enable); |
| |
| static void bgx_sgmii_change_link_state(struct lmac *lmac) |
| { |
| struct bgx *bgx = lmac->bgx; |
| u64 cmr_cfg; |
| u64 port_cfg = 0; |
| u64 misc_ctl = 0; |
| |
| cmr_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_CMRX_CFG); |
| cmr_cfg &= ~CMR_EN; |
| bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg); |
| |
| port_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG); |
| misc_ctl = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_PCS_MISCX_CTL); |
| |
| if (lmac->link_up) { |
| misc_ctl &= ~PCS_MISC_CTL_GMX_ENO; |
| port_cfg &= ~GMI_PORT_CFG_DUPLEX; |
| port_cfg |= (lmac->last_duplex << 2); |
| } else { |
| misc_ctl |= PCS_MISC_CTL_GMX_ENO; |
| } |
| |
| switch (lmac->last_speed) { |
| case 10: |
| port_cfg &= ~GMI_PORT_CFG_SPEED; /* speed 0 */ |
| port_cfg |= GMI_PORT_CFG_SPEED_MSB; /* speed_msb 1 */ |
| port_cfg &= ~GMI_PORT_CFG_SLOT_TIME; /* slottime 0 */ |
| misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK; |
| misc_ctl |= 50; /* samp_pt */ |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 64); |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_BURST, 0); |
| break; |
| case 100: |
| port_cfg &= ~GMI_PORT_CFG_SPEED; /* speed 0 */ |
| port_cfg &= ~GMI_PORT_CFG_SPEED_MSB; /* speed_msb 0 */ |
| port_cfg &= ~GMI_PORT_CFG_SLOT_TIME; /* slottime 0 */ |
| misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK; |
| misc_ctl |= 5; /* samp_pt */ |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 64); |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_BURST, 0); |
| break; |
| case 1000: |
| port_cfg |= GMI_PORT_CFG_SPEED; /* speed 1 */ |
| port_cfg &= ~GMI_PORT_CFG_SPEED_MSB; /* speed_msb 0 */ |
| port_cfg |= GMI_PORT_CFG_SLOT_TIME; /* slottime 1 */ |
| misc_ctl &= ~PCS_MISC_CTL_SAMP_PT_MASK; |
| misc_ctl |= 1; /* samp_pt */ |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_TXX_SLOT, 512); |
| if (lmac->last_duplex) |
| bgx_reg_write(bgx, lmac->lmacid, |
| BGX_GMP_GMI_TXX_BURST, 0); |
| else |
| bgx_reg_write(bgx, lmac->lmacid, |
| BGX_GMP_GMI_TXX_BURST, 8192); |
| break; |
| default: |
| break; |
| } |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_PCS_MISCX_CTL, misc_ctl); |
| bgx_reg_write(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG, port_cfg); |
| |
| port_cfg = bgx_reg_read(bgx, lmac->lmacid, BGX_GMP_GMI_PRTX_CFG); |
| |
| /* renable lmac */ |
| cmr_cfg |= CMR_EN; |
| bgx_reg_write(bgx, lmac->lmacid, BGX_CMRX_CFG, cmr_cfg); |
| } |
| |
| static void bgx_lmac_handler(struct net_device *netdev) |
| { |
| struct lmac *lmac = container_of(netdev, struct lmac, netdev); |
| struct phy_device *phydev = lmac->phydev; |
| int link_changed = 0; |
| |
| if (!lmac) |
| return; |
| |
| if (!phydev->link && lmac->last_link) |
| link_changed = -1; |
| |
| if (phydev->link && |
| (lmac->last_duplex != phydev->duplex || |
| lmac->last_link != phydev->link || |
| lmac->last_speed != phydev->speed)) { |
| link_changed = 1; |
| } |
| |
| lmac->last_link = phydev->link; |
| lmac->last_speed = phydev->speed; |
| lmac->last_duplex = phydev->duplex; |
| |
| if (!link_changed) |
| return; |
| |
| if (link_changed > 0) |
| lmac->link_up = true; |
| else |
| lmac->link_up = false; |
| |
| if (lmac->is_sgmii) |
| bgx_sgmii_change_link_state(lmac); |
| else |
| bgx_xaui_check_link(lmac); |
| } |
| |
| u64 bgx_get_rx_stats(int node, int bgx_idx, int lmac, int idx) |
| { |
| struct bgx *bgx; |
| |
| bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx]; |
| if (!bgx) |
| return 0; |
| |
| if (idx > 8) |
| lmac = 0; |
| return bgx_reg_read(bgx, lmac, BGX_CMRX_RX_STAT0 + (idx * 8)); |
| } |
| EXPORT_SYMBOL(bgx_get_rx_stats); |
| |
| u64 bgx_get_tx_stats(int node, int bgx_idx, int lmac, int idx) |
| { |
| struct bgx *bgx; |
| |
| bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx]; |
| if (!bgx) |
| return 0; |
| |
| return bgx_reg_read(bgx, lmac, BGX_CMRX_TX_STAT0 + (idx * 8)); |
| } |
| EXPORT_SYMBOL(bgx_get_tx_stats); |
| |
| static void bgx_flush_dmac_addrs(struct bgx *bgx, int lmac) |
| { |
| u64 offset; |
| |
| while (bgx->lmac[lmac].dmac > 0) { |
| offset = ((bgx->lmac[lmac].dmac - 1) * sizeof(u64)) + |
| (lmac * MAX_DMAC_PER_LMAC * sizeof(u64)); |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_DMACX_CAM + offset, 0); |
| bgx->lmac[lmac].dmac--; |
| } |
| } |
| |
| /* Configure BGX LMAC in internal loopback mode */ |
| void bgx_lmac_internal_loopback(int node, int bgx_idx, |
| int lmac_idx, bool enable) |
| { |
| struct bgx *bgx; |
| struct lmac *lmac; |
| u64 cfg; |
| |
| bgx = bgx_vnic[(node * MAX_BGX_PER_CN88XX) + bgx_idx]; |
| if (!bgx) |
| return; |
| |
| lmac = &bgx->lmac[lmac_idx]; |
| if (lmac->is_sgmii) { |
| cfg = bgx_reg_read(bgx, lmac_idx, BGX_GMP_PCS_MRX_CTL); |
| if (enable) |
| cfg |= PCS_MRX_CTL_LOOPBACK1; |
| else |
| cfg &= ~PCS_MRX_CTL_LOOPBACK1; |
| bgx_reg_write(bgx, lmac_idx, BGX_GMP_PCS_MRX_CTL, cfg); |
| } else { |
| cfg = bgx_reg_read(bgx, lmac_idx, BGX_SPUX_CONTROL1); |
| if (enable) |
| cfg |= SPU_CTL_LOOPBACK; |
| else |
| cfg &= ~SPU_CTL_LOOPBACK; |
| bgx_reg_write(bgx, lmac_idx, BGX_SPUX_CONTROL1, cfg); |
| } |
| } |
| EXPORT_SYMBOL(bgx_lmac_internal_loopback); |
| |
| static int bgx_lmac_sgmii_init(struct bgx *bgx, int lmacid) |
| { |
| u64 cfg; |
| |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_THRESH, 0x30); |
| /* max packet size */ |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_RXX_JABBER, MAX_FRAME_SIZE); |
| |
| /* Disable frame alignment if using preamble */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND); |
| if (cfg & 1) |
| bgx_reg_write(bgx, lmacid, BGX_GMP_GMI_TXX_SGMII_CTL, 0); |
| |
| /* Enable lmac */ |
| bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN); |
| |
| /* PCS reset */ |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_RESET); |
| if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, |
| PCS_MRX_CTL_RESET, true)) { |
| dev_err(&bgx->pdev->dev, "BGX PCS reset not completed\n"); |
| return -1; |
| } |
| |
| /* power down, reset autoneg, autoneg enable */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_PCS_MRX_CTL); |
| cfg &= ~PCS_MRX_CTL_PWR_DN; |
| cfg |= (PCS_MRX_CTL_RST_AN | PCS_MRX_CTL_AN_EN); |
| bgx_reg_write(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, cfg); |
| |
| if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_STATUS, |
| PCS_MRX_STATUS_AN_CPT, false)) { |
| dev_err(&bgx->pdev->dev, "BGX AN_CPT not completed\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int bgx_lmac_xaui_init(struct bgx *bgx, int lmacid, int lmac_type) |
| { |
| u64 cfg; |
| |
| /* Reset SPU */ |
| bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET); |
| if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET, true)) { |
| dev_err(&bgx->pdev->dev, "BGX SPU reset not completed\n"); |
| return -1; |
| } |
| |
| /* Disable LMAC */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| cfg &= ~CMR_EN; |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| bgx_reg_modify(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER); |
| /* Set interleaved running disparity for RXAUI */ |
| if (bgx->lmac_type != BGX_MODE_RXAUI) |
| bgx_reg_modify(bgx, lmacid, |
| BGX_SPUX_MISC_CONTROL, SPU_MISC_CTL_RX_DIS); |
| else |
| bgx_reg_modify(bgx, lmacid, BGX_SPUX_MISC_CONTROL, |
| SPU_MISC_CTL_RX_DIS | SPU_MISC_CTL_INTLV_RDISP); |
| |
| /* clear all interrupts */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_INT); |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_RX_INT, cfg); |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_INT); |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_INT, cfg); |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg); |
| |
| if (bgx->use_training) { |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LP_CUP, 0x00); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_CUP, 0x00); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_LD_REP, 0x00); |
| /* training enable */ |
| bgx_reg_modify(bgx, lmacid, |
| BGX_SPUX_BR_PMD_CRTL, SPU_PMD_CRTL_TRAIN_EN); |
| } |
| |
| /* Append FCS to each packet */ |
| bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_APPEND, SMU_TX_APPEND_FCS_D); |
| |
| /* Disable forward error correction */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_FEC_CONTROL); |
| cfg &= ~SPU_FEC_CTL_FEC_EN; |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_FEC_CONTROL, cfg); |
| |
| /* Disable autoneg */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_AN_CONTROL); |
| cfg = cfg & ~(SPU_AN_CTL_AN_EN | SPU_AN_CTL_XNP_EN); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_AN_CONTROL, cfg); |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_AN_ADV); |
| if (bgx->lmac_type == BGX_MODE_10G_KR) |
| cfg |= (1 << 23); |
| else if (bgx->lmac_type == BGX_MODE_40G_KR) |
| cfg |= (1 << 24); |
| else |
| cfg &= ~((1 << 23) | (1 << 24)); |
| cfg = cfg & (~((1ULL << 25) | (1ULL << 22) | (1ULL << 12))); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_AN_ADV, cfg); |
| |
| cfg = bgx_reg_read(bgx, 0, BGX_SPU_DBG_CONTROL); |
| cfg &= ~SPU_DBG_CTL_AN_ARB_LINK_CHK_EN; |
| bgx_reg_write(bgx, 0, BGX_SPU_DBG_CONTROL, cfg); |
| |
| /* Enable lmac */ |
| bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN); |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_CONTROL1); |
| cfg &= ~SPU_CTL_LOW_POWER; |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_CONTROL1, cfg); |
| |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_CTL); |
| cfg &= ~SMU_TX_CTL_UNI_EN; |
| cfg |= SMU_TX_CTL_DIC_EN; |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_CTL, cfg); |
| |
| /* take lmac_count into account */ |
| bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_THRESH, (0x100 - 1)); |
| /* max packet size */ |
| bgx_reg_modify(bgx, lmacid, BGX_SMUX_RX_JABBER, MAX_FRAME_SIZE); |
| |
| return 0; |
| } |
| |
| static int bgx_xaui_check_link(struct lmac *lmac) |
| { |
| struct bgx *bgx = lmac->bgx; |
| int lmacid = lmac->lmacid; |
| int lmac_type = bgx->lmac_type; |
| u64 cfg; |
| |
| bgx_reg_modify(bgx, lmacid, BGX_SPUX_MISC_CONTROL, SPU_MISC_CTL_RX_DIS); |
| if (bgx->use_training) { |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT); |
| if (!(cfg & (1ull << 13))) { |
| cfg = (1ull << 13) | (1ull << 14); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg); |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL); |
| cfg |= (1ull << 0); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_BR_PMD_CRTL, cfg); |
| return -1; |
| } |
| } |
| |
| /* wait for PCS to come out of reset */ |
| if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_CONTROL1, SPU_CTL_RESET, true)) { |
| dev_err(&bgx->pdev->dev, "BGX SPU reset not completed\n"); |
| return -1; |
| } |
| |
| if ((lmac_type == BGX_MODE_10G_KR) || (lmac_type == BGX_MODE_XFI) || |
| (lmac_type == BGX_MODE_40G_KR) || (lmac_type == BGX_MODE_XLAUI)) { |
| if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_BR_STATUS1, |
| SPU_BR_STATUS_BLK_LOCK, false)) { |
| dev_err(&bgx->pdev->dev, |
| "SPU_BR_STATUS_BLK_LOCK not completed\n"); |
| return -1; |
| } |
| } else { |
| if (bgx_poll_reg(bgx, lmacid, BGX_SPUX_BX_STATUS, |
| SPU_BX_STATUS_RX_ALIGN, false)) { |
| dev_err(&bgx->pdev->dev, |
| "SPU_BX_STATUS_RX_ALIGN not completed\n"); |
| return -1; |
| } |
| } |
| |
| /* Clear rcvflt bit (latching high) and read it back */ |
| if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) |
| bgx_reg_modify(bgx, lmacid, |
| BGX_SPUX_STATUS2, SPU_STATUS2_RCVFLT); |
| if (bgx_reg_read(bgx, lmacid, BGX_SPUX_STATUS2) & SPU_STATUS2_RCVFLT) { |
| dev_err(&bgx->pdev->dev, "Receive fault, retry training\n"); |
| if (bgx->use_training) { |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_INT); |
| if (!(cfg & (1ull << 13))) { |
| cfg = (1ull << 13) | (1ull << 14); |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_INT, cfg); |
| cfg = bgx_reg_read(bgx, lmacid, |
| BGX_SPUX_BR_PMD_CRTL); |
| cfg |= (1ull << 0); |
| bgx_reg_write(bgx, lmacid, |
| BGX_SPUX_BR_PMD_CRTL, cfg); |
| return -1; |
| } |
| } |
| return -1; |
| } |
| |
| /* Wait for BGX RX to be idle */ |
| if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_RX_IDLE, false)) { |
| dev_err(&bgx->pdev->dev, "SMU RX not idle\n"); |
| return -1; |
| } |
| |
| /* Wait for BGX TX to be idle */ |
| if (bgx_poll_reg(bgx, lmacid, BGX_SMUX_CTL, SMU_CTL_TX_IDLE, false)) { |
| dev_err(&bgx->pdev->dev, "SMU TX not idle\n"); |
| return -1; |
| } |
| |
| /* Clear receive packet disable */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SPUX_MISC_CONTROL); |
| cfg &= ~SPU_MISC_CTL_RX_DIS; |
| bgx_reg_write(bgx, lmacid, BGX_SPUX_MISC_CONTROL, cfg); |
| |
| /* Check for MAC RX faults */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_RX_CTL); |
| /* 0 - Link is okay, 1 - Local fault, 2 - Remote fault */ |
| cfg &= SMU_RX_CTL_STATUS; |
| if (!cfg) |
| return 0; |
| |
| /* Rx local/remote fault seen. |
| * Do lmac reinit to see if condition recovers |
| */ |
| bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type); |
| |
| return -1; |
| } |
| |
| static void bgx_poll_for_link(struct work_struct *work) |
| { |
| struct lmac *lmac; |
| u64 spu_link, smu_link; |
| |
| lmac = container_of(work, struct lmac, dwork.work); |
| |
| /* Receive link is latching low. Force it high and verify it */ |
| bgx_reg_modify(lmac->bgx, lmac->lmacid, |
| BGX_SPUX_STATUS1, SPU_STATUS1_RCV_LNK); |
| bgx_poll_reg(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1, |
| SPU_STATUS1_RCV_LNK, false); |
| |
| spu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SPUX_STATUS1); |
| smu_link = bgx_reg_read(lmac->bgx, lmac->lmacid, BGX_SMUX_RX_CTL); |
| |
| if ((spu_link & SPU_STATUS1_RCV_LNK) && |
| !(smu_link & SMU_RX_CTL_STATUS)) { |
| lmac->link_up = 1; |
| if (lmac->bgx->lmac_type == BGX_MODE_XLAUI) |
| lmac->last_speed = 40000; |
| else |
| lmac->last_speed = 10000; |
| lmac->last_duplex = 1; |
| } else { |
| lmac->link_up = 0; |
| lmac->last_speed = SPEED_UNKNOWN; |
| lmac->last_duplex = DUPLEX_UNKNOWN; |
| } |
| |
| if (lmac->last_link != lmac->link_up) { |
| if (lmac->link_up) { |
| if (bgx_xaui_check_link(lmac)) { |
| /* Errors, clear link_up state */ |
| lmac->link_up = 0; |
| lmac->last_speed = SPEED_UNKNOWN; |
| lmac->last_duplex = DUPLEX_UNKNOWN; |
| } |
| } |
| lmac->last_link = lmac->link_up; |
| } |
| |
| queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2); |
| } |
| |
| static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid) |
| { |
| struct lmac *lmac; |
| u64 cfg; |
| |
| lmac = &bgx->lmac[lmacid]; |
| lmac->bgx = bgx; |
| |
| if (bgx->lmac_type == BGX_MODE_SGMII) { |
| lmac->is_sgmii = 1; |
| if (bgx_lmac_sgmii_init(bgx, lmacid)) |
| return -1; |
| } else { |
| lmac->is_sgmii = 0; |
| if (bgx_lmac_xaui_init(bgx, lmacid, bgx->lmac_type)) |
| return -1; |
| } |
| |
| if (lmac->is_sgmii) { |
| cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND); |
| cfg |= ((1ull << 2) | (1ull << 1)); /* FCS and PAD */ |
| bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_APPEND, cfg); |
| bgx_reg_write(bgx, lmacid, BGX_GMP_GMI_TXX_MIN_PKT, 60 - 1); |
| } else { |
| cfg = bgx_reg_read(bgx, lmacid, BGX_SMUX_TX_APPEND); |
| cfg |= ((1ull << 2) | (1ull << 1)); /* FCS and PAD */ |
| bgx_reg_modify(bgx, lmacid, BGX_SMUX_TX_APPEND, cfg); |
| bgx_reg_write(bgx, lmacid, BGX_SMUX_TX_MIN_PKT, 60 + 4); |
| } |
| |
| /* Enable lmac */ |
| bgx_reg_modify(bgx, lmacid, BGX_CMRX_CFG, CMR_EN); |
| |
| /* Restore default cfg, incase low level firmware changed it */ |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_RX_DMAC_CTL, 0x03); |
| |
| if ((bgx->lmac_type != BGX_MODE_XFI) && |
| (bgx->lmac_type != BGX_MODE_XLAUI) && |
| (bgx->lmac_type != BGX_MODE_40G_KR) && |
| (bgx->lmac_type != BGX_MODE_10G_KR)) { |
| if (!lmac->phydev) |
| return -ENODEV; |
| |
| lmac->phydev->dev_flags = 0; |
| |
| if (phy_connect_direct(&lmac->netdev, lmac->phydev, |
| bgx_lmac_handler, |
| PHY_INTERFACE_MODE_SGMII)) |
| return -ENODEV; |
| |
| phy_start_aneg(lmac->phydev); |
| } else { |
| lmac->check_link = alloc_workqueue("check_link", WQ_UNBOUND | |
| WQ_MEM_RECLAIM, 1); |
| if (!lmac->check_link) |
| return -ENOMEM; |
| INIT_DELAYED_WORK(&lmac->dwork, bgx_poll_for_link); |
| queue_delayed_work(lmac->check_link, &lmac->dwork, 0); |
| } |
| |
| return 0; |
| } |
| |
| static void bgx_lmac_disable(struct bgx *bgx, u8 lmacid) |
| { |
| struct lmac *lmac; |
| u64 cfg; |
| |
| lmac = &bgx->lmac[lmacid]; |
| if (lmac->check_link) { |
| /* Destroy work queue */ |
| cancel_delayed_work_sync(&lmac->dwork); |
| destroy_workqueue(lmac->check_link); |
| } |
| |
| /* Disable packet reception */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| cfg &= ~CMR_PKT_RX_EN; |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| /* Give chance for Rx/Tx FIFO to get drained */ |
| bgx_poll_reg(bgx, lmacid, BGX_CMRX_RX_FIFO_LEN, (u64)0x1FFF, true); |
| bgx_poll_reg(bgx, lmacid, BGX_CMRX_TX_FIFO_LEN, (u64)0x3FFF, true); |
| |
| /* Disable packet transmission */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| cfg &= ~CMR_PKT_TX_EN; |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| /* Disable serdes lanes */ |
| if (!lmac->is_sgmii) |
| bgx_reg_modify(bgx, lmacid, |
| BGX_SPUX_CONTROL1, SPU_CTL_LOW_POWER); |
| else |
| bgx_reg_modify(bgx, lmacid, |
| BGX_GMP_PCS_MRX_CTL, PCS_MRX_CTL_PWR_DN); |
| |
| /* Disable LMAC */ |
| cfg = bgx_reg_read(bgx, lmacid, BGX_CMRX_CFG); |
| cfg &= ~CMR_EN; |
| bgx_reg_write(bgx, lmacid, BGX_CMRX_CFG, cfg); |
| |
| bgx_flush_dmac_addrs(bgx, lmacid); |
| |
| if ((bgx->lmac_type != BGX_MODE_XFI) && |
| (bgx->lmac_type != BGX_MODE_XLAUI) && |
| (bgx->lmac_type != BGX_MODE_40G_KR) && |
| (bgx->lmac_type != BGX_MODE_10G_KR) && lmac->phydev) |
| phy_disconnect(lmac->phydev); |
| |
| lmac->phydev = NULL; |
| } |
| |
| static void bgx_set_num_ports(struct bgx *bgx) |
| { |
| u64 lmac_count; |
| |
| switch (bgx->qlm_mode) { |
| case QLM_MODE_SGMII: |
| bgx->lmac_count = 4; |
| bgx->lmac_type = BGX_MODE_SGMII; |
| bgx->lane_to_sds = 0; |
| break; |
| case QLM_MODE_XAUI_1X4: |
| bgx->lmac_count = 1; |
| bgx->lmac_type = BGX_MODE_XAUI; |
| bgx->lane_to_sds = 0xE4; |
| break; |
| case QLM_MODE_RXAUI_2X2: |
| bgx->lmac_count = 2; |
| bgx->lmac_type = BGX_MODE_RXAUI; |
| bgx->lane_to_sds = 0xE4; |
| break; |
| case QLM_MODE_XFI_4X1: |
| bgx->lmac_count = 4; |
| bgx->lmac_type = BGX_MODE_XFI; |
| bgx->lane_to_sds = 0; |
| break; |
| case QLM_MODE_XLAUI_1X4: |
| bgx->lmac_count = 1; |
| bgx->lmac_type = BGX_MODE_XLAUI; |
| bgx->lane_to_sds = 0xE4; |
| break; |
| case QLM_MODE_10G_KR_4X1: |
| bgx->lmac_count = 4; |
| bgx->lmac_type = BGX_MODE_10G_KR; |
| bgx->lane_to_sds = 0; |
| bgx->use_training = 1; |
| break; |
| case QLM_MODE_40G_KR4_1X4: |
| bgx->lmac_count = 1; |
| bgx->lmac_type = BGX_MODE_40G_KR; |
| bgx->lane_to_sds = 0xE4; |
| bgx->use_training = 1; |
| break; |
| default: |
| bgx->lmac_count = 0; |
| break; |
| } |
| |
| /* Check if low level firmware has programmed LMAC count |
| * based on board type, if yes consider that otherwise |
| * the default static values |
| */ |
| lmac_count = bgx_reg_read(bgx, 0, BGX_CMR_RX_LMACS) & 0x7; |
| if (lmac_count != 4) |
| bgx->lmac_count = lmac_count; |
| } |
| |
| static void bgx_init_hw(struct bgx *bgx) |
| { |
| int i; |
| |
| bgx_set_num_ports(bgx); |
| |
| bgx_reg_modify(bgx, 0, BGX_CMR_GLOBAL_CFG, CMR_GLOBAL_CFG_FCS_STRIP); |
| if (bgx_reg_read(bgx, 0, BGX_CMR_BIST_STATUS)) |
| dev_err(&bgx->pdev->dev, "BGX%d BIST failed\n", bgx->bgx_id); |
| |
| /* Set lmac type and lane2serdes mapping */ |
| for (i = 0; i < bgx->lmac_count; i++) { |
| if (bgx->lmac_type == BGX_MODE_RXAUI) { |
| if (i) |
| bgx->lane_to_sds = 0x0e; |
| else |
| bgx->lane_to_sds = 0x04; |
| bgx_reg_write(bgx, i, BGX_CMRX_CFG, |
| (bgx->lmac_type << 8) | bgx->lane_to_sds); |
| continue; |
| } |
| bgx_reg_write(bgx, i, BGX_CMRX_CFG, |
| (bgx->lmac_type << 8) | (bgx->lane_to_sds + i)); |
| bgx->lmac[i].lmacid_bd = lmac_count; |
| lmac_count++; |
| } |
| |
| bgx_reg_write(bgx, 0, BGX_CMR_TX_LMACS, bgx->lmac_count); |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_LMACS, bgx->lmac_count); |
| |
| /* Set the backpressure AND mask */ |
| for (i = 0; i < bgx->lmac_count; i++) |
| bgx_reg_modify(bgx, 0, BGX_CMR_CHAN_MSK_AND, |
| ((1ULL << MAX_BGX_CHANS_PER_LMAC) - 1) << |
| (i * MAX_BGX_CHANS_PER_LMAC)); |
| |
| /* Disable all MAC filtering */ |
| for (i = 0; i < RX_DMAC_COUNT; i++) |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_DMACX_CAM + (i * 8), 0x00); |
| |
| /* Disable MAC steering (NCSI traffic) */ |
| for (i = 0; i < RX_TRAFFIC_STEER_RULE_COUNT; i++) |
| bgx_reg_write(bgx, 0, BGX_CMR_RX_STREERING + (i * 8), 0x00); |
| } |
| |
| static void bgx_get_qlm_mode(struct bgx *bgx) |
| { |
| struct device *dev = &bgx->pdev->dev; |
| int lmac_type; |
| int train_en; |
| |
| /* Read LMAC0 type to figure out QLM mode |
| * This is configured by low level firmware |
| */ |
| lmac_type = bgx_reg_read(bgx, 0, BGX_CMRX_CFG); |
| lmac_type = (lmac_type >> 8) & 0x07; |
| |
| train_en = bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) & |
| SPU_PMD_CRTL_TRAIN_EN; |
| |
| switch (lmac_type) { |
| case BGX_MODE_SGMII: |
| bgx->qlm_mode = QLM_MODE_SGMII; |
| dev_info(dev, "BGX%d QLM mode: SGMII\n", bgx->bgx_id); |
| break; |
| case BGX_MODE_XAUI: |
| bgx->qlm_mode = QLM_MODE_XAUI_1X4; |
| dev_info(dev, "BGX%d QLM mode: XAUI\n", bgx->bgx_id); |
| break; |
| case BGX_MODE_RXAUI: |
| bgx->qlm_mode = QLM_MODE_RXAUI_2X2; |
| dev_info(dev, "BGX%d QLM mode: RXAUI\n", bgx->bgx_id); |
| break; |
| case BGX_MODE_XFI: |
| if (!train_en) { |
| bgx->qlm_mode = QLM_MODE_XFI_4X1; |
| dev_info(dev, "BGX%d QLM mode: XFI\n", bgx->bgx_id); |
| } else { |
| bgx->qlm_mode = QLM_MODE_10G_KR_4X1; |
| dev_info(dev, "BGX%d QLM mode: 10G_KR\n", bgx->bgx_id); |
| } |
| break; |
| case BGX_MODE_XLAUI: |
| if (!train_en) { |
| bgx->qlm_mode = QLM_MODE_XLAUI_1X4; |
| dev_info(dev, "BGX%d QLM mode: XLAUI\n", bgx->bgx_id); |
| } else { |
| bgx->qlm_mode = QLM_MODE_40G_KR4_1X4; |
| dev_info(dev, "BGX%d QLM mode: 40G_KR4\n", bgx->bgx_id); |
| } |
| break; |
| default: |
| bgx->qlm_mode = QLM_MODE_SGMII; |
| dev_info(dev, "BGX%d QLM default mode: SGMII\n", bgx->bgx_id); |
| } |
| } |
| |
| #ifdef CONFIG_ACPI |
| |
| static int acpi_get_mac_address(struct acpi_device *adev, u8 *dst) |
| { |
| u8 mac[ETH_ALEN]; |
| int ret; |
| |
| ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev), |
| "mac-address", mac, ETH_ALEN); |
| if (ret) |
| goto out; |
| |
| if (!is_valid_ether_addr(mac)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| memcpy(dst, mac, ETH_ALEN); |
| out: |
| return ret; |
| } |
| |
| /* Currently only sets the MAC address. */ |
| static acpi_status bgx_acpi_register_phy(acpi_handle handle, |
| u32 lvl, void *context, void **rv) |
| { |
| struct bgx *bgx = context; |
| struct acpi_device *adev; |
| |
| if (acpi_bus_get_device(handle, &adev)) |
| goto out; |
| |
| acpi_get_mac_address(adev, bgx->lmac[bgx->lmac_count].mac); |
| |
| SET_NETDEV_DEV(&bgx->lmac[bgx->lmac_count].netdev, &bgx->pdev->dev); |
| |
| bgx->lmac[bgx->lmac_count].lmacid = bgx->lmac_count; |
| out: |
| bgx->lmac_count++; |
| return AE_OK; |
| } |
| |
| static acpi_status bgx_acpi_match_id(acpi_handle handle, u32 lvl, |
| void *context, void **ret_val) |
| { |
| struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct bgx *bgx = context; |
| char bgx_sel[5]; |
| |
| snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id); |
| if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &string))) { |
| pr_warn("Invalid link device\n"); |
| return AE_OK; |
| } |
| |
| if (strncmp(string.pointer, bgx_sel, 4)) |
| return AE_OK; |
| |
| acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1, |
| bgx_acpi_register_phy, NULL, bgx, NULL); |
| |
| kfree(string.pointer); |
| return AE_CTRL_TERMINATE; |
| } |
| |
| static int bgx_init_acpi_phy(struct bgx *bgx) |
| { |
| acpi_get_devices(NULL, bgx_acpi_match_id, bgx, (void **)NULL); |
| return 0; |
| } |
| |
| #else |
| |
| static int bgx_init_acpi_phy(struct bgx *bgx) |
| { |
| return -ENODEV; |
| } |
| |
| #endif /* CONFIG_ACPI */ |
| |
| #if IS_ENABLED(CONFIG_OF_MDIO) |
| |
| static int bgx_init_of_phy(struct bgx *bgx) |
| { |
| struct device_node *np; |
| struct device_node *np_child; |
| u8 lmac = 0; |
| char bgx_sel[5]; |
| const char *mac; |
| |
| /* Get BGX node from DT */ |
| snprintf(bgx_sel, 5, "bgx%d", bgx->bgx_id); |
| np = of_find_node_by_name(NULL, bgx_sel); |
| if (!np) |
| return -ENODEV; |
| |
| for_each_child_of_node(np, np_child) { |
| struct device_node *phy_np = of_parse_phandle(np_child, |
| "phy-handle", 0); |
| if (!phy_np) |
| continue; |
| bgx->lmac[lmac].phydev = of_phy_find_device(phy_np); |
| |
| mac = of_get_mac_address(np_child); |
| if (mac) |
| ether_addr_copy(bgx->lmac[lmac].mac, mac); |
| |
| SET_NETDEV_DEV(&bgx->lmac[lmac].netdev, &bgx->pdev->dev); |
| bgx->lmac[lmac].lmacid = lmac; |
| lmac++; |
| if (lmac == MAX_LMAC_PER_BGX) { |
| of_node_put(np_child); |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| #else |
| |
| static int bgx_init_of_phy(struct bgx *bgx) |
| { |
| return -ENODEV; |
| } |
| |
| #endif /* CONFIG_OF_MDIO */ |
| |
| static int bgx_init_phy(struct bgx *bgx) |
| { |
| if (!acpi_disabled) |
| return bgx_init_acpi_phy(bgx); |
| |
| return bgx_init_of_phy(bgx); |
| } |
| |
| static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| int err; |
| struct device *dev = &pdev->dev; |
| struct bgx *bgx = NULL; |
| u8 lmac; |
| |
| /* Load octeon mdio driver */ |
| octeon_mdiobus_force_mod_depencency(); |
| |
| bgx = devm_kzalloc(dev, sizeof(*bgx), GFP_KERNEL); |
| if (!bgx) |
| return -ENOMEM; |
| bgx->pdev = pdev; |
| |
| pci_set_drvdata(pdev, bgx); |
| |
| err = pci_enable_device(pdev); |
| if (err) { |
| dev_err(dev, "Failed to enable PCI device\n"); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| err = pci_request_regions(pdev, DRV_NAME); |
| if (err) { |
| dev_err(dev, "PCI request regions failed 0x%x\n", err); |
| goto err_disable_device; |
| } |
| |
| /* MAP configuration registers */ |
| bgx->reg_base = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM, 0); |
| if (!bgx->reg_base) { |
| dev_err(dev, "BGX: Cannot map CSR memory space, aborting\n"); |
| err = -ENOMEM; |
| goto err_release_regions; |
| } |
| bgx->bgx_id = (pci_resource_start(pdev, PCI_CFG_REG_BAR_NUM) >> 24) & 1; |
| bgx->bgx_id += nic_get_node_id(pdev) * MAX_BGX_PER_CN88XX; |
| |
| bgx_vnic[bgx->bgx_id] = bgx; |
| bgx_get_qlm_mode(bgx); |
| |
| err = bgx_init_phy(bgx); |
| if (err) |
| goto err_enable; |
| |
| bgx_init_hw(bgx); |
| |
| /* Enable all LMACs */ |
| for (lmac = 0; lmac < bgx->lmac_count; lmac++) { |
| err = bgx_lmac_enable(bgx, lmac); |
| if (err) { |
| dev_err(dev, "BGX%d failed to enable lmac%d\n", |
| bgx->bgx_id, lmac); |
| goto err_enable; |
| } |
| } |
| |
| return 0; |
| |
| err_enable: |
| bgx_vnic[bgx->bgx_id] = NULL; |
| err_release_regions: |
| pci_release_regions(pdev); |
| err_disable_device: |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| return err; |
| } |
| |
| static void bgx_remove(struct pci_dev *pdev) |
| { |
| struct bgx *bgx = pci_get_drvdata(pdev); |
| u8 lmac; |
| |
| /* Disable all LMACs */ |
| for (lmac = 0; lmac < bgx->lmac_count; lmac++) |
| bgx_lmac_disable(bgx, lmac); |
| |
| bgx_vnic[bgx->bgx_id] = NULL; |
| pci_release_regions(pdev); |
| pci_disable_device(pdev); |
| pci_set_drvdata(pdev, NULL); |
| } |
| |
| static struct pci_driver bgx_driver = { |
| .name = DRV_NAME, |
| .id_table = bgx_id_table, |
| .probe = bgx_probe, |
| .remove = bgx_remove, |
| }; |
| |
| static int __init bgx_init_module(void) |
| { |
| pr_info("%s, ver %s\n", DRV_NAME, DRV_VERSION); |
| |
| return pci_register_driver(&bgx_driver); |
| } |
| |
| static void __exit bgx_cleanup_module(void) |
| { |
| pci_unregister_driver(&bgx_driver); |
| } |
| |
| module_init(bgx_init_module); |
| module_exit(bgx_cleanup_module); |