| /* |
| * Hardkernel's Exynos4412 based ODROID-X board device tree source |
| * |
| * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com> |
| * |
| * Device tree source file for Hardkernel's ODROID-X board which is based |
| * on Samsung's Exynos4412 SoC. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| /dts-v1/; |
| #include "exynos4412-odroid-common.dtsi" |
| |
| / { |
| model = "Hardkernel ODROID-X board based on Exynos4412"; |
| compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4"; |
| |
| memory { |
| reg = <0x40000000 0x3FF00000>; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led1 { |
| label = "led1:heart"; |
| gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; |
| default-state = "on"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| led2 { |
| label = "led2:mmc0"; |
| gpios = <&gpc1 2 GPIO_ACTIVE_LOW>; |
| default-state = "on"; |
| linux,default-trigger = "mmc0"; |
| }; |
| }; |
| |
| gpio_keys { |
| pinctrl-0 = <&gpio_power_key &gpio_home_key>; |
| |
| home_key { |
| interrupt-parent = <&gpx2>; |
| interrupts = <2 0>; |
| gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; |
| linux,code = <KEY_HOME>; |
| label = "home key"; |
| debounce-interval = <10>; |
| gpio-key,wakeup; |
| }; |
| }; |
| |
| regulator_p3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "p3v3_en"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpa1 1 GPIO_ACTIVE_LOW>; |
| enable-active-high; |
| regulator-always-on; |
| }; |
| }; |
| |
| &ehci { |
| port@1 { |
| status = "okay"; |
| }; |
| }; |
| |
| &pinctrl_1 { |
| gpio_home_key: home_key { |
| samsung,pins = "gpx2-2"; |
| samsung,pin-pud = <0>; |
| }; |
| }; |
| |
| &serial_2 { |
| status = "okay"; |
| }; |
| |
| &serial_3 { |
| status = "okay"; |
| }; |
