| /********************************************************************** |
| * Author: Cavium, Inc. |
| * |
| * Contact: support@cavium.com |
| * Please include "LiquidIO" in the subject. |
| * |
| * Copyright (c) 2003-2015 Cavium, Inc. |
| * |
| * This file is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License, Version 2, as |
| * published by the Free Software Foundation. |
| * |
| * This file is distributed in the hope that it will be useful, but |
| * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty |
| * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or |
| * NONINFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * This file may also be available under a different license from Cavium. |
| * Contact Cavium, Inc. for more information |
| **********************************************************************/ |
| #include <linux/version.h> |
| #include <linux/module.h> |
| #include <linux/crc32.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/ip.h> |
| #include <net/ip.h> |
| #include <linux/ipv6.h> |
| #include <linux/net_tstamp.h> |
| #include <linux/if_vlan.h> |
| #include <linux/firmware.h> |
| #include <linux/ethtool.h> |
| #include <linux/ptp_clock_kernel.h> |
| #include <linux/types.h> |
| #include <linux/list.h> |
| #include <linux/workqueue.h> |
| #include <linux/interrupt.h> |
| #include "octeon_config.h" |
| #include "liquidio_common.h" |
| #include "octeon_droq.h" |
| #include "octeon_iq.h" |
| #include "response_manager.h" |
| #include "octeon_device.h" |
| #include "octeon_nic.h" |
| #include "octeon_main.h" |
| #include "octeon_network.h" |
| #include "cn66xx_regs.h" |
| #include "cn66xx_device.h" |
| #include "cn68xx_regs.h" |
| #include "cn68xx_device.h" |
| #include "liquidio_image.h" |
| |
| MODULE_AUTHOR("Cavium Networks, <support@cavium.com>"); |
| MODULE_DESCRIPTION("Cavium LiquidIO Intelligent Server Adapter Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(LIQUIDIO_VERSION); |
| MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_210SV_NAME LIO_FW_NAME_SUFFIX); |
| MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_210NV_NAME LIO_FW_NAME_SUFFIX); |
| MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_410NV_NAME LIO_FW_NAME_SUFFIX); |
| |
| static int ddr_timeout = 10000; |
| module_param(ddr_timeout, int, 0644); |
| MODULE_PARM_DESC(ddr_timeout, |
| "Number of milliseconds to wait for DDR initialization. 0 waits for ddr_timeout to be set to non-zero value before starting to check"); |
| |
| static u32 console_bitmask; |
| module_param(console_bitmask, int, 0644); |
| MODULE_PARM_DESC(console_bitmask, |
| "Bitmask indicating which consoles have debug output redirected to syslog."); |
| |
| #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK) |
| |
| static int debug = -1; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "NETIF_MSG debug bits"); |
| |
| static char fw_type[LIO_MAX_FW_TYPE_LEN]; |
| module_param_string(fw_type, fw_type, sizeof(fw_type), 0000); |
| MODULE_PARM_DESC(fw_type, "Type of firmware to be loaded. Default \"nic\""); |
| |
| static int conf_type; |
| module_param(conf_type, int, 0); |
| MODULE_PARM_DESC(conf_type, "select octeon configuration 0 default 1 ovs"); |
| |
| /* Bit mask values for lio->ifstate */ |
| #define LIO_IFSTATE_DROQ_OPS 0x01 |
| #define LIO_IFSTATE_REGISTERED 0x02 |
| #define LIO_IFSTATE_RUNNING 0x04 |
| #define LIO_IFSTATE_RX_TIMESTAMP_ENABLED 0x08 |
| |
| /* Polling interval for determining when NIC application is alive */ |
| #define LIQUIDIO_STARTER_POLL_INTERVAL_MS 100 |
| |
| /* runtime link query interval */ |
| #define LIQUIDIO_LINK_QUERY_INTERVAL_MS 1000 |
| |
| struct liquidio_if_cfg_context { |
| int octeon_id; |
| |
| wait_queue_head_t wc; |
| |
| int cond; |
| }; |
| |
| struct liquidio_if_cfg_resp { |
| u64 rh; |
| struct liquidio_if_cfg_info cfg_info; |
| u64 status; |
| }; |
| |
| struct oct_link_status_resp { |
| u64 rh; |
| struct oct_link_info link_info; |
| u64 status; |
| }; |
| |
| struct oct_timestamp_resp { |
| u64 rh; |
| u64 timestamp; |
| u64 status; |
| }; |
| |
| #define OCT_TIMESTAMP_RESP_SIZE (sizeof(struct oct_timestamp_resp)) |
| |
| union tx_info { |
| u64 u64; |
| struct { |
| #ifdef __BIG_ENDIAN_BITFIELD |
| u16 gso_size; |
| u16 gso_segs; |
| u32 reserved; |
| #else |
| u32 reserved; |
| u16 gso_segs; |
| u16 gso_size; |
| #endif |
| } s; |
| }; |
| |
| /** Octeon device properties to be used by the NIC module. |
| * Each octeon device in the system will be represented |
| * by this structure in the NIC module. |
| */ |
| |
| #define OCTNIC_MAX_SG (MAX_SKB_FRAGS) |
| |
| #define OCTNIC_GSO_MAX_HEADER_SIZE 128 |
| #define OCTNIC_GSO_MAX_SIZE (GSO_MAX_SIZE - OCTNIC_GSO_MAX_HEADER_SIZE) |
| |
| /** Structure of a node in list of gather components maintained by |
| * NIC driver for each network device. |
| */ |
| struct octnic_gather { |
| /** List manipulation. Next and prev pointers. */ |
| struct list_head list; |
| |
| /** Size of the gather component at sg in bytes. */ |
| int sg_size; |
| |
| /** Number of bytes that sg was adjusted to make it 8B-aligned. */ |
| int adjust; |
| |
| /** Gather component that can accommodate max sized fragment list |
| * received from the IP layer. |
| */ |
| struct octeon_sg_entry *sg; |
| }; |
| |
| /** This structure is used by NIC driver to store information required |
| * to free the sk_buff when the packet has been fetched by Octeon. |
| * Bytes offset below assume worst-case of a 64-bit system. |
| */ |
| struct octnet_buf_free_info { |
| /** Bytes 1-8. Pointer to network device private structure. */ |
| struct lio *lio; |
| |
| /** Bytes 9-16. Pointer to sk_buff. */ |
| struct sk_buff *skb; |
| |
| /** Bytes 17-24. Pointer to gather list. */ |
| struct octnic_gather *g; |
| |
| /** Bytes 25-32. Physical address of skb->data or gather list. */ |
| u64 dptr; |
| |
| /** Bytes 33-47. Piggybacked soft command, if any */ |
| struct octeon_soft_command *sc; |
| }; |
| |
| struct handshake { |
| struct completion init; |
| struct completion started; |
| struct pci_dev *pci_dev; |
| int init_ok; |
| int started_ok; |
| }; |
| |
| struct octeon_device_priv { |
| /** Tasklet structures for this device. */ |
| struct tasklet_struct droq_tasklet; |
| unsigned long napi_mask; |
| }; |
| |
| static int octeon_device_init(struct octeon_device *); |
| static void liquidio_remove(struct pci_dev *pdev); |
| static int liquidio_probe(struct pci_dev *pdev, |
| const struct pci_device_id *ent); |
| |
| static struct handshake handshake[MAX_OCTEON_DEVICES]; |
| static struct completion first_stage; |
| |
| static void octeon_droq_bh(unsigned long pdev) |
| { |
| int q_no; |
| int reschedule = 0; |
| struct octeon_device *oct = (struct octeon_device *)pdev; |
| struct octeon_device_priv *oct_priv = |
| (struct octeon_device_priv *)oct->priv; |
| |
| /* for (q_no = 0; q_no < oct->num_oqs; q_no++) { */ |
| for (q_no = 0; q_no < MAX_OCTEON_OUTPUT_QUEUES; q_no++) { |
| if (!(oct->io_qmask.oq & (1UL << q_no))) |
| continue; |
| reschedule |= octeon_droq_process_packets(oct, oct->droq[q_no], |
| MAX_PACKET_BUDGET); |
| } |
| |
| if (reschedule) |
| tasklet_schedule(&oct_priv->droq_tasklet); |
| } |
| |
| static int lio_wait_for_oq_pkts(struct octeon_device *oct) |
| { |
| struct octeon_device_priv *oct_priv = |
| (struct octeon_device_priv *)oct->priv; |
| int retry = 100, pkt_cnt = 0, pending_pkts = 0; |
| int i; |
| |
| do { |
| pending_pkts = 0; |
| |
| for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) { |
| if (!(oct->io_qmask.oq & (1UL << i))) |
| continue; |
| pkt_cnt += octeon_droq_check_hw_for_pkts(oct, |
| oct->droq[i]); |
| } |
| if (pkt_cnt > 0) { |
| pending_pkts += pkt_cnt; |
| tasklet_schedule(&oct_priv->droq_tasklet); |
| } |
| pkt_cnt = 0; |
| schedule_timeout_uninterruptible(1); |
| |
| } while (retry-- && pending_pkts); |
| |
| return pkt_cnt; |
| } |
| |
| void octeon_report_tx_completion_to_bql(void *txq, unsigned int pkts_compl, |
| unsigned int bytes_compl) |
| { |
| struct netdev_queue *netdev_queue = txq; |
| |
| netdev_tx_completed_queue(netdev_queue, pkts_compl, bytes_compl); |
| } |
| |
| void octeon_update_tx_completion_counters(void *buf, int reqtype, |
| unsigned int *pkts_compl, |
| unsigned int *bytes_compl) |
| { |
| struct octnet_buf_free_info *finfo; |
| struct sk_buff *skb = NULL; |
| struct octeon_soft_command *sc; |
| |
| switch (reqtype) { |
| case REQTYPE_NORESP_NET: |
| case REQTYPE_NORESP_NET_SG: |
| finfo = buf; |
| skb = finfo->skb; |
| break; |
| |
| case REQTYPE_RESP_NET_SG: |
| case REQTYPE_RESP_NET: |
| sc = buf; |
| skb = sc->callback_arg; |
| break; |
| |
| default: |
| return; |
| } |
| |
| (*pkts_compl)++; |
| *bytes_compl += skb->len; |
| } |
| |
| void octeon_report_sent_bytes_to_bql(void *buf, int reqtype) |
| { |
| struct octnet_buf_free_info *finfo; |
| struct sk_buff *skb; |
| struct octeon_soft_command *sc; |
| struct netdev_queue *txq; |
| |
| switch (reqtype) { |
| case REQTYPE_NORESP_NET: |
| case REQTYPE_NORESP_NET_SG: |
| finfo = buf; |
| skb = finfo->skb; |
| break; |
| |
| case REQTYPE_RESP_NET_SG: |
| case REQTYPE_RESP_NET: |
| sc = buf; |
| skb = sc->callback_arg; |
| break; |
| |
| default: |
| return; |
| } |
| |
| txq = netdev_get_tx_queue(skb->dev, skb_get_queue_mapping(skb)); |
| netdev_tx_sent_queue(txq, skb->len); |
| } |
| |
| int octeon_console_debug_enabled(u32 console) |
| { |
| return (console_bitmask >> (console)) & 0x1; |
| } |
| |
| /** |
| * \brief Forces all IO queues off on a given device |
| * @param oct Pointer to Octeon device |
| */ |
| static void force_io_queues_off(struct octeon_device *oct) |
| { |
| if ((oct->chip_id == OCTEON_CN66XX) || |
| (oct->chip_id == OCTEON_CN68XX)) { |
| /* Reset the Enable bits for Input Queues. */ |
| octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, 0); |
| |
| /* Reset the Enable bits for Output Queues. */ |
| octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, 0); |
| } |
| } |
| |
| /** |
| * \brief wait for all pending requests to complete |
| * @param oct Pointer to Octeon device |
| * |
| * Called during shutdown sequence |
| */ |
| static int wait_for_pending_requests(struct octeon_device *oct) |
| { |
| int i, pcount = 0; |
| |
| for (i = 0; i < 100; i++) { |
| pcount = |
| atomic_read(&oct->response_list |
| [OCTEON_ORDERED_SC_LIST].pending_req_count); |
| if (pcount) |
| schedule_timeout_uninterruptible(HZ / 10); |
| else |
| break; |
| } |
| |
| if (pcount) |
| return 1; |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Cause device to go quiet so it can be safely removed/reset/etc |
| * @param oct Pointer to Octeon device |
| */ |
| static inline void pcierror_quiesce_device(struct octeon_device *oct) |
| { |
| int i; |
| |
| /* Disable the input and output queues now. No more packets will |
| * arrive from Octeon, but we should wait for all packet processing |
| * to finish. |
| */ |
| force_io_queues_off(oct); |
| |
| /* To allow for in-flight requests */ |
| schedule_timeout_uninterruptible(100); |
| |
| if (wait_for_pending_requests(oct)) |
| dev_err(&oct->pci_dev->dev, "There were pending requests\n"); |
| |
| /* Force all requests waiting to be fetched by OCTEON to complete. */ |
| for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) { |
| struct octeon_instr_queue *iq; |
| |
| if (!(oct->io_qmask.iq & (1UL << i))) |
| continue; |
| iq = oct->instr_queue[i]; |
| |
| if (atomic_read(&iq->instr_pending)) { |
| spin_lock_bh(&iq->lock); |
| iq->fill_cnt = 0; |
| iq->octeon_read_index = iq->host_write_index; |
| iq->stats.instr_processed += |
| atomic_read(&iq->instr_pending); |
| lio_process_iq_request_list(oct, iq); |
| spin_unlock_bh(&iq->lock); |
| } |
| } |
| |
| /* Force all pending ordered list requests to time out. */ |
| lio_process_ordered_list(oct, 1); |
| |
| /* We do not need to wait for output queue packets to be processed. */ |
| } |
| |
| /** |
| * \brief Cleanup PCI AER uncorrectable error status |
| * @param dev Pointer to PCI device |
| */ |
| static void cleanup_aer_uncorrect_error_status(struct pci_dev *dev) |
| { |
| int pos = 0x100; |
| u32 status, mask; |
| |
| pr_info("%s :\n", __func__); |
| |
| pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status); |
| pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask); |
| if (dev->error_state == pci_channel_io_normal) |
| status &= ~mask; /* Clear corresponding nonfatal bits */ |
| else |
| status &= mask; /* Clear corresponding fatal bits */ |
| pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status); |
| } |
| |
| /** |
| * \brief Stop all PCI IO to a given device |
| * @param dev Pointer to Octeon device |
| */ |
| static void stop_pci_io(struct octeon_device *oct) |
| { |
| /* No more instructions will be forwarded. */ |
| atomic_set(&oct->status, OCT_DEV_IN_RESET); |
| |
| pci_disable_device(oct->pci_dev); |
| |
| /* Disable interrupts */ |
| oct->fn_list.disable_interrupt(oct->chip); |
| |
| pcierror_quiesce_device(oct); |
| |
| /* Release the interrupt line */ |
| free_irq(oct->pci_dev->irq, oct); |
| |
| if (oct->flags & LIO_FLAG_MSI_ENABLED) |
| pci_disable_msi(oct->pci_dev); |
| |
| dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n", |
| lio_get_state_string(&oct->status)); |
| |
| /* cn63xx_cleanup_aer_uncorrect_error_status(oct->pci_dev); */ |
| /* making it a common function for all OCTEON models */ |
| cleanup_aer_uncorrect_error_status(oct->pci_dev); |
| } |
| |
| /** |
| * \brief called when PCI error is detected |
| * @param pdev Pointer to PCI device |
| * @param state The current pci connection state |
| * |
| * This function is called after a PCI bus error affecting |
| * this device has been detected. |
| */ |
| static pci_ers_result_t liquidio_pcie_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct octeon_device *oct = pci_get_drvdata(pdev); |
| |
| /* Non-correctable Non-fatal errors */ |
| if (state == pci_channel_io_normal) { |
| dev_err(&oct->pci_dev->dev, "Non-correctable non-fatal error reported:\n"); |
| cleanup_aer_uncorrect_error_status(oct->pci_dev); |
| return PCI_ERS_RESULT_CAN_RECOVER; |
| } |
| |
| /* Non-correctable Fatal errors */ |
| dev_err(&oct->pci_dev->dev, "Non-correctable FATAL reported by PCI AER driver\n"); |
| stop_pci_io(oct); |
| |
| /* Always return a DISCONNECT. There is no support for recovery but only |
| * for a clean shutdown. |
| */ |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| /** |
| * \brief mmio handler |
| * @param pdev Pointer to PCI device |
| */ |
| static pci_ers_result_t liquidio_pcie_mmio_enabled(struct pci_dev *pdev) |
| { |
| /* We should never hit this since we never ask for a reset for a Fatal |
| * Error. We always return DISCONNECT in io_error above. |
| * But play safe and return RECOVERED for now. |
| */ |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| /** |
| * \brief called after the pci bus has been reset. |
| * @param pdev Pointer to PCI device |
| * |
| * Restart the card from scratch, as if from a cold-boot. Implementation |
| * resembles the first-half of the octeon_resume routine. |
| */ |
| static pci_ers_result_t liquidio_pcie_slot_reset(struct pci_dev *pdev) |
| { |
| /* We should never hit this since we never ask for a reset for a Fatal |
| * Error. We always return DISCONNECT in io_error above. |
| * But play safe and return RECOVERED for now. |
| */ |
| return PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| /** |
| * \brief called when traffic can start flowing again. |
| * @param pdev Pointer to PCI device |
| * |
| * This callback is called when the error recovery driver tells us that |
| * its OK to resume normal operation. Implementation resembles the |
| * second-half of the octeon_resume routine. |
| */ |
| static void liquidio_pcie_resume(struct pci_dev *pdev) |
| { |
| /* Nothing to be done here. */ |
| } |
| |
| #ifdef CONFIG_PM |
| /** |
| * \brief called when suspending |
| * @param pdev Pointer to PCI device |
| * @param state state to suspend to |
| */ |
| static int liquidio_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| return 0; |
| } |
| |
| /** |
| * \brief called when resuming |
| * @param pdev Pointer to PCI device |
| */ |
| static int liquidio_resume(struct pci_dev *pdev) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* For PCI-E Advanced Error Recovery (AER) Interface */ |
| static const struct pci_error_handlers liquidio_err_handler = { |
| .error_detected = liquidio_pcie_error_detected, |
| .mmio_enabled = liquidio_pcie_mmio_enabled, |
| .slot_reset = liquidio_pcie_slot_reset, |
| .resume = liquidio_pcie_resume, |
| }; |
| |
| static const struct pci_device_id liquidio_pci_tbl[] = { |
| { /* 68xx */ |
| PCI_VENDOR_ID_CAVIUM, 0x91, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 |
| }, |
| { /* 66xx */ |
| PCI_VENDOR_ID_CAVIUM, 0x92, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 |
| }, |
| { |
| 0, 0, 0, 0, 0, 0, 0 |
| } |
| }; |
| MODULE_DEVICE_TABLE(pci, liquidio_pci_tbl); |
| |
| static struct pci_driver liquidio_pci_driver = { |
| .name = "LiquidIO", |
| .id_table = liquidio_pci_tbl, |
| .probe = liquidio_probe, |
| .remove = liquidio_remove, |
| .err_handler = &liquidio_err_handler, /* For AER */ |
| |
| #ifdef CONFIG_PM |
| .suspend = liquidio_suspend, |
| .resume = liquidio_resume, |
| #endif |
| |
| }; |
| |
| /** |
| * \brief register PCI driver |
| */ |
| static int liquidio_init_pci(void) |
| { |
| return pci_register_driver(&liquidio_pci_driver); |
| } |
| |
| /** |
| * \brief unregister PCI driver |
| */ |
| static void liquidio_deinit_pci(void) |
| { |
| pci_unregister_driver(&liquidio_pci_driver); |
| } |
| |
| /** |
| * \brief check interface state |
| * @param lio per-network private data |
| * @param state_flag flag state to check |
| */ |
| static inline int ifstate_check(struct lio *lio, int state_flag) |
| { |
| return atomic_read(&lio->ifstate) & state_flag; |
| } |
| |
| /** |
| * \brief set interface state |
| * @param lio per-network private data |
| * @param state_flag flag state to set |
| */ |
| static inline void ifstate_set(struct lio *lio, int state_flag) |
| { |
| atomic_set(&lio->ifstate, (atomic_read(&lio->ifstate) | state_flag)); |
| } |
| |
| /** |
| * \brief clear interface state |
| * @param lio per-network private data |
| * @param state_flag flag state to clear |
| */ |
| static inline void ifstate_reset(struct lio *lio, int state_flag) |
| { |
| atomic_set(&lio->ifstate, (atomic_read(&lio->ifstate) & ~(state_flag))); |
| } |
| |
| /** |
| * \brief Stop Tx queues |
| * @param netdev network device |
| */ |
| static inline void txqs_stop(struct net_device *netdev) |
| { |
| if (netif_is_multiqueue(netdev)) { |
| int i; |
| |
| for (i = 0; i < netdev->num_tx_queues; i++) |
| netif_stop_subqueue(netdev, i); |
| } else { |
| netif_stop_queue(netdev); |
| } |
| } |
| |
| /** |
| * \brief Start Tx queues |
| * @param netdev network device |
| */ |
| static inline void txqs_start(struct net_device *netdev) |
| { |
| if (netif_is_multiqueue(netdev)) { |
| int i; |
| |
| for (i = 0; i < netdev->num_tx_queues; i++) |
| netif_start_subqueue(netdev, i); |
| } else { |
| netif_start_queue(netdev); |
| } |
| } |
| |
| /** |
| * \brief Wake Tx queues |
| * @param netdev network device |
| */ |
| static inline void txqs_wake(struct net_device *netdev) |
| { |
| if (netif_is_multiqueue(netdev)) { |
| int i; |
| |
| for (i = 0; i < netdev->num_tx_queues; i++) |
| netif_wake_subqueue(netdev, i); |
| } else { |
| netif_wake_queue(netdev); |
| } |
| } |
| |
| /** |
| * \brief Stop Tx queue |
| * @param netdev network device |
| */ |
| static void stop_txq(struct net_device *netdev) |
| { |
| txqs_stop(netdev); |
| } |
| |
| /** |
| * \brief Start Tx queue |
| * @param netdev network device |
| */ |
| static void start_txq(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| |
| if (lio->linfo.link.s.status) { |
| txqs_start(netdev); |
| return; |
| } |
| } |
| |
| /** |
| * \brief Wake a queue |
| * @param netdev network device |
| * @param q which queue to wake |
| */ |
| static inline void wake_q(struct net_device *netdev, int q) |
| { |
| if (netif_is_multiqueue(netdev)) |
| netif_wake_subqueue(netdev, q); |
| else |
| netif_wake_queue(netdev); |
| } |
| |
| /** |
| * \brief Stop a queue |
| * @param netdev network device |
| * @param q which queue to stop |
| */ |
| static inline void stop_q(struct net_device *netdev, int q) |
| { |
| if (netif_is_multiqueue(netdev)) |
| netif_stop_subqueue(netdev, q); |
| else |
| netif_stop_queue(netdev); |
| } |
| |
| /** |
| * \brief Check Tx queue status, and take appropriate action |
| * @param lio per-network private data |
| * @returns 0 if full, number of queues woken up otherwise |
| */ |
| static inline int check_txq_status(struct lio *lio) |
| { |
| int ret_val = 0; |
| |
| if (netif_is_multiqueue(lio->netdev)) { |
| int numqs = lio->netdev->num_tx_queues; |
| int q, iq = 0; |
| |
| /* check each sub-queue state */ |
| for (q = 0; q < numqs; q++) { |
| iq = lio->linfo.txpciq[q & (lio->linfo.num_txpciq - 1)]; |
| if (octnet_iq_is_full(lio->oct_dev, iq)) |
| continue; |
| wake_q(lio->netdev, q); |
| ret_val++; |
| } |
| } else { |
| if (octnet_iq_is_full(lio->oct_dev, lio->txq)) |
| return 0; |
| wake_q(lio->netdev, lio->txq); |
| ret_val = 1; |
| } |
| return ret_val; |
| } |
| |
| /** |
| * Remove the node at the head of the list. The list would be empty at |
| * the end of this call if there are no more nodes in the list. |
| */ |
| static inline struct list_head *list_delete_head(struct list_head *root) |
| { |
| struct list_head *node; |
| |
| if ((root->prev == root) && (root->next == root)) |
| node = NULL; |
| else |
| node = root->next; |
| |
| if (node) |
| list_del(node); |
| |
| return node; |
| } |
| |
| /** |
| * \brief Delete gather list |
| * @param lio per-network private data |
| */ |
| static void delete_glist(struct lio *lio) |
| { |
| struct octnic_gather *g; |
| |
| do { |
| g = (struct octnic_gather *) |
| list_delete_head(&lio->glist); |
| if (g) { |
| if (g->sg) |
| kfree((void *)((unsigned long)g->sg - |
| g->adjust)); |
| kfree(g); |
| } |
| } while (g); |
| } |
| |
| /** |
| * \brief Setup gather list |
| * @param lio per-network private data |
| */ |
| static int setup_glist(struct lio *lio) |
| { |
| int i; |
| struct octnic_gather *g; |
| |
| INIT_LIST_HEAD(&lio->glist); |
| |
| for (i = 0; i < lio->tx_qsize; i++) { |
| g = kzalloc(sizeof(*g), GFP_KERNEL); |
| if (!g) |
| break; |
| |
| g->sg_size = |
| ((ROUNDUP4(OCTNIC_MAX_SG) >> 2) * OCT_SG_ENTRY_SIZE); |
| |
| g->sg = kmalloc(g->sg_size + 8, GFP_KERNEL); |
| if (!g->sg) { |
| kfree(g); |
| break; |
| } |
| |
| /* The gather component should be aligned on 64-bit boundary */ |
| if (((unsigned long)g->sg) & 7) { |
| g->adjust = 8 - (((unsigned long)g->sg) & 7); |
| g->sg = (struct octeon_sg_entry *) |
| ((unsigned long)g->sg + g->adjust); |
| } |
| list_add_tail(&g->list, &lio->glist); |
| } |
| |
| if (i == lio->tx_qsize) |
| return 0; |
| |
| delete_glist(lio); |
| return 1; |
| } |
| |
| /** |
| * \brief Print link information |
| * @param netdev network device |
| */ |
| static void print_link_info(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| |
| if (atomic_read(&lio->ifstate) & LIO_IFSTATE_REGISTERED) { |
| struct oct_link_info *linfo = &lio->linfo; |
| |
| if (linfo->link.s.status) { |
| netif_info(lio, link, lio->netdev, "%d Mbps %s Duplex UP\n", |
| linfo->link.s.speed, |
| (linfo->link.s.duplex) ? "Full" : "Half"); |
| } else { |
| netif_info(lio, link, lio->netdev, "Link Down\n"); |
| } |
| } |
| } |
| |
| /** |
| * \brief Update link status |
| * @param netdev network device |
| * @param ls link status structure |
| * |
| * Called on receipt of a link status response from the core application to |
| * update each interface's link status. |
| */ |
| static inline void update_link_status(struct net_device *netdev, |
| union oct_link_status *ls) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| |
| if ((lio->intf_open) && (lio->linfo.link.u64 != ls->u64)) { |
| lio->linfo.link.u64 = ls->u64; |
| |
| print_link_info(netdev); |
| |
| if (lio->linfo.link.s.status) { |
| netif_carrier_on(netdev); |
| /* start_txq(netdev); */ |
| txqs_wake(netdev); |
| } else { |
| netif_carrier_off(netdev); |
| stop_txq(netdev); |
| } |
| } |
| } |
| |
| /** |
| * \brief Droq packet processor sceduler |
| * @param oct octeon device |
| */ |
| static |
| void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct) |
| { |
| struct octeon_device_priv *oct_priv = |
| (struct octeon_device_priv *)oct->priv; |
| u64 oq_no; |
| struct octeon_droq *droq; |
| |
| if (oct->int_status & OCT_DEV_INTR_PKT_DATA) { |
| for (oq_no = 0; oq_no < MAX_OCTEON_OUTPUT_QUEUES; oq_no++) { |
| if (!(oct->droq_intr & (1 << oq_no))) |
| continue; |
| |
| droq = oct->droq[oq_no]; |
| |
| if (droq->ops.poll_mode) { |
| droq->ops.napi_fn(droq); |
| oct_priv->napi_mask |= (1 << oq_no); |
| } else { |
| tasklet_schedule(&oct_priv->droq_tasklet); |
| } |
| } |
| } |
| } |
| |
| /** |
| * \brief Interrupt handler for octeon |
| * @param irq unused |
| * @param dev octeon device |
| */ |
| static |
| irqreturn_t liquidio_intr_handler(int irq __attribute__((unused)), void *dev) |
| { |
| struct octeon_device *oct = (struct octeon_device *)dev; |
| irqreturn_t ret; |
| |
| /* Disable our interrupts for the duration of ISR */ |
| oct->fn_list.disable_interrupt(oct->chip); |
| |
| ret = oct->fn_list.process_interrupt_regs(oct); |
| |
| if (ret == IRQ_HANDLED) |
| liquidio_schedule_droq_pkt_handlers(oct); |
| |
| /* Re-enable our interrupts */ |
| if (!(atomic_read(&oct->status) == OCT_DEV_IN_RESET)) |
| oct->fn_list.enable_interrupt(oct->chip); |
| |
| return ret; |
| } |
| |
| /** |
| * \brief Setup interrupt for octeon device |
| * @param oct octeon device |
| * |
| * Enable interrupt in Octeon device as given in the PCI interrupt mask. |
| */ |
| static int octeon_setup_interrupt(struct octeon_device *oct) |
| { |
| int irqret, err; |
| |
| err = pci_enable_msi(oct->pci_dev); |
| if (err) |
| dev_warn(&oct->pci_dev->dev, "Reverting to legacy interrupts. Error: %d\n", |
| err); |
| else |
| oct->flags |= LIO_FLAG_MSI_ENABLED; |
| |
| irqret = request_irq(oct->pci_dev->irq, liquidio_intr_handler, |
| IRQF_SHARED, "octeon", oct); |
| if (irqret) { |
| if (oct->flags & LIO_FLAG_MSI_ENABLED) |
| pci_disable_msi(oct->pci_dev); |
| dev_err(&oct->pci_dev->dev, "Request IRQ failed with code: %d\n", |
| irqret); |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * \brief PCI probe handler |
| * @param pdev PCI device structure |
| * @param ent unused |
| */ |
| static int liquidio_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct octeon_device *oct_dev = NULL; |
| struct handshake *hs; |
| |
| oct_dev = octeon_allocate_device(pdev->device, |
| sizeof(struct octeon_device_priv)); |
| if (!oct_dev) { |
| dev_err(&pdev->dev, "Unable to allocate device\n"); |
| return -ENOMEM; |
| } |
| |
| dev_info(&pdev->dev, "Initializing device %x:%x.\n", |
| (u32)pdev->vendor, (u32)pdev->device); |
| |
| /* Assign octeon_device for this device to the private data area. */ |
| pci_set_drvdata(pdev, oct_dev); |
| |
| /* set linux specific device pointer */ |
| oct_dev->pci_dev = (void *)pdev; |
| |
| hs = &handshake[oct_dev->octeon_id]; |
| init_completion(&hs->init); |
| init_completion(&hs->started); |
| hs->pci_dev = pdev; |
| |
| if (oct_dev->octeon_id == 0) |
| /* first LiquidIO NIC is detected */ |
| complete(&first_stage); |
| |
| if (octeon_device_init(oct_dev)) { |
| liquidio_remove(pdev); |
| return -ENOMEM; |
| } |
| |
| dev_dbg(&oct_dev->pci_dev->dev, "Device is ready\n"); |
| |
| return 0; |
| } |
| |
| /** |
| *\brief Destroy resources associated with octeon device |
| * @param pdev PCI device structure |
| * @param ent unused |
| */ |
| static void octeon_destroy_resources(struct octeon_device *oct) |
| { |
| int i; |
| struct octeon_device_priv *oct_priv = |
| (struct octeon_device_priv *)oct->priv; |
| |
| struct handshake *hs; |
| |
| switch (atomic_read(&oct->status)) { |
| case OCT_DEV_RUNNING: |
| case OCT_DEV_CORE_OK: |
| |
| /* No more instructions will be forwarded. */ |
| atomic_set(&oct->status, OCT_DEV_IN_RESET); |
| |
| oct->app_mode = CVM_DRV_INVALID_APP; |
| dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n", |
| lio_get_state_string(&oct->status)); |
| |
| schedule_timeout_uninterruptible(HZ / 10); |
| |
| /* fallthrough */ |
| case OCT_DEV_HOST_OK: |
| |
| /* fallthrough */ |
| case OCT_DEV_CONSOLE_INIT_DONE: |
| /* Remove any consoles */ |
| octeon_remove_consoles(oct); |
| |
| /* fallthrough */ |
| case OCT_DEV_IO_QUEUES_DONE: |
| if (wait_for_pending_requests(oct)) |
| dev_err(&oct->pci_dev->dev, "There were pending requests\n"); |
| |
| if (lio_wait_for_instr_fetch(oct)) |
| dev_err(&oct->pci_dev->dev, "IQ had pending instructions\n"); |
| |
| /* Disable the input and output queues now. No more packets will |
| * arrive from Octeon, but we should wait for all packet |
| * processing to finish. |
| */ |
| oct->fn_list.disable_io_queues(oct); |
| |
| if (lio_wait_for_oq_pkts(oct)) |
| dev_err(&oct->pci_dev->dev, "OQ had pending packets\n"); |
| |
| /* Disable interrupts */ |
| oct->fn_list.disable_interrupt(oct->chip); |
| |
| /* Release the interrupt line */ |
| free_irq(oct->pci_dev->irq, oct); |
| |
| if (oct->flags & LIO_FLAG_MSI_ENABLED) |
| pci_disable_msi(oct->pci_dev); |
| |
| /* Soft reset the octeon device before exiting */ |
| oct->fn_list.soft_reset(oct); |
| |
| /* Disable the device, releasing the PCI INT */ |
| pci_disable_device(oct->pci_dev); |
| |
| /* fallthrough */ |
| case OCT_DEV_IN_RESET: |
| case OCT_DEV_DROQ_INIT_DONE: |
| /*atomic_set(&oct->status, OCT_DEV_DROQ_INIT_DONE);*/ |
| mdelay(100); |
| for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES; i++) { |
| if (!(oct->io_qmask.oq & (1UL << i))) |
| continue; |
| octeon_delete_droq(oct, i); |
| } |
| |
| /* Force any pending handshakes to complete */ |
| for (i = 0; i < MAX_OCTEON_DEVICES; i++) { |
| hs = &handshake[i]; |
| |
| if (hs->pci_dev) { |
| handshake[oct->octeon_id].init_ok = 0; |
| complete(&handshake[oct->octeon_id].init); |
| handshake[oct->octeon_id].started_ok = 0; |
| complete(&handshake[oct->octeon_id].started); |
| } |
| } |
| |
| /* fallthrough */ |
| case OCT_DEV_RESP_LIST_INIT_DONE: |
| octeon_delete_response_list(oct); |
| |
| /* fallthrough */ |
| case OCT_DEV_SC_BUFF_POOL_INIT_DONE: |
| octeon_free_sc_buffer_pool(oct); |
| |
| /* fallthrough */ |
| case OCT_DEV_INSTR_QUEUE_INIT_DONE: |
| for (i = 0; i < MAX_OCTEON_INSTR_QUEUES; i++) { |
| if (!(oct->io_qmask.iq & (1UL << i))) |
| continue; |
| octeon_delete_instr_queue(oct, i); |
| } |
| |
| /* fallthrough */ |
| case OCT_DEV_DISPATCH_INIT_DONE: |
| octeon_delete_dispatch_list(oct); |
| cancel_delayed_work_sync(&oct->nic_poll_work.work); |
| |
| /* fallthrough */ |
| case OCT_DEV_PCI_MAP_DONE: |
| octeon_unmap_pci_barx(oct, 0); |
| octeon_unmap_pci_barx(oct, 1); |
| |
| /* fallthrough */ |
| case OCT_DEV_BEGIN_STATE: |
| /* Nothing to be done here either */ |
| break; |
| } /* end switch(oct->status) */ |
| |
| tasklet_kill(&oct_priv->droq_tasklet); |
| } |
| |
| /** |
| * \brief Send Rx control command |
| * @param lio per-network private data |
| * @param start_stop whether to start or stop |
| */ |
| static void send_rx_ctrl_cmd(struct lio *lio, int start_stop) |
| { |
| struct octnic_ctrl_pkt nctrl; |
| struct octnic_ctrl_params nparams; |
| |
| memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt)); |
| |
| nctrl.ncmd.s.cmd = OCTNET_CMD_RX_CTL; |
| nctrl.ncmd.s.param1 = lio->linfo.ifidx; |
| nctrl.ncmd.s.param2 = start_stop; |
| nctrl.netpndev = (u64)lio->netdev; |
| |
| nparams.resp_order = OCTEON_RESP_NORESPONSE; |
| |
| if (octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams) < 0) |
| netif_info(lio, rx_err, lio->netdev, "Failed to send RX Control message\n"); |
| } |
| |
| /** |
| * \brief Destroy NIC device interface |
| * @param oct octeon device |
| * @param ifidx which interface to destroy |
| * |
| * Cleanup associated with each interface for an Octeon device when NIC |
| * module is being unloaded or if initialization fails during load. |
| */ |
| static void liquidio_destroy_nic_device(struct octeon_device *oct, int ifidx) |
| { |
| struct net_device *netdev = oct->props[ifidx].netdev; |
| struct lio *lio; |
| |
| if (!netdev) { |
| dev_err(&oct->pci_dev->dev, "%s No netdevice ptr for index %d\n", |
| __func__, ifidx); |
| return; |
| } |
| |
| lio = GET_LIO(netdev); |
| |
| dev_dbg(&oct->pci_dev->dev, "NIC device cleanup\n"); |
| |
| send_rx_ctrl_cmd(lio, 0); |
| |
| if (atomic_read(&lio->ifstate) & LIO_IFSTATE_RUNNING) |
| txqs_stop(netdev); |
| |
| if (atomic_read(&lio->ifstate) & LIO_IFSTATE_REGISTERED) |
| unregister_netdev(netdev); |
| |
| delete_glist(lio); |
| |
| free_netdev(netdev); |
| |
| oct->props[ifidx].netdev = NULL; |
| } |
| |
| /** |
| * \brief Stop complete NIC functionality |
| * @param oct octeon device |
| */ |
| static int liquidio_stop_nic_module(struct octeon_device *oct) |
| { |
| int i, j; |
| struct lio *lio; |
| |
| dev_dbg(&oct->pci_dev->dev, "Stopping network interfaces\n"); |
| if (!oct->ifcount) { |
| dev_err(&oct->pci_dev->dev, "Init for Octeon was not completed\n"); |
| return 1; |
| } |
| |
| for (i = 0; i < oct->ifcount; i++) { |
| lio = GET_LIO(oct->props[i].netdev); |
| for (j = 0; j < lio->linfo.num_rxpciq; j++) |
| octeon_unregister_droq_ops(oct, lio->linfo.rxpciq[j]); |
| } |
| |
| for (i = 0; i < oct->ifcount; i++) |
| liquidio_destroy_nic_device(oct, i); |
| |
| dev_dbg(&oct->pci_dev->dev, "Network interfaces stopped\n"); |
| return 0; |
| } |
| |
| /** |
| * \brief Cleans up resources at unload time |
| * @param pdev PCI device structure |
| */ |
| static void liquidio_remove(struct pci_dev *pdev) |
| { |
| struct octeon_device *oct_dev = pci_get_drvdata(pdev); |
| |
| dev_dbg(&oct_dev->pci_dev->dev, "Stopping device\n"); |
| |
| if (oct_dev->app_mode && (oct_dev->app_mode == CVM_DRV_NIC_APP)) |
| liquidio_stop_nic_module(oct_dev); |
| |
| /* Reset the octeon device and cleanup all memory allocated for |
| * the octeon device by driver. |
| */ |
| octeon_destroy_resources(oct_dev); |
| |
| dev_info(&oct_dev->pci_dev->dev, "Device removed\n"); |
| |
| /* This octeon device has been removed. Update the global |
| * data structure to reflect this. Free the device structure. |
| */ |
| octeon_free_device_mem(oct_dev); |
| } |
| |
| /** |
| * \brief Identify the Octeon device and to map the BAR address space |
| * @param oct octeon device |
| */ |
| static int octeon_chip_specific_setup(struct octeon_device *oct) |
| { |
| u32 dev_id, rev_id; |
| int ret = 1; |
| |
| pci_read_config_dword(oct->pci_dev, 0, &dev_id); |
| pci_read_config_dword(oct->pci_dev, 8, &rev_id); |
| oct->rev_id = rev_id & 0xff; |
| |
| switch (dev_id) { |
| case OCTEON_CN68XX_PCIID: |
| oct->chip_id = OCTEON_CN68XX; |
| ret = lio_setup_cn68xx_octeon_device(oct); |
| break; |
| |
| case OCTEON_CN66XX_PCIID: |
| oct->chip_id = OCTEON_CN66XX; |
| ret = lio_setup_cn66xx_octeon_device(oct); |
| break; |
| default: |
| dev_err(&oct->pci_dev->dev, "Unknown device found (dev_id: %x)\n", |
| dev_id); |
| } |
| |
| if (!ret) |
| dev_info(&oct->pci_dev->dev, "CN68XX PASS%d.%d %s\n", |
| OCTEON_MAJOR_REV(oct), |
| OCTEON_MINOR_REV(oct), |
| octeon_get_conf(oct)->card_name); |
| |
| return ret; |
| } |
| |
| /** |
| * \brief PCI initialization for each Octeon device. |
| * @param oct octeon device |
| */ |
| static int octeon_pci_os_setup(struct octeon_device *oct) |
| { |
| /* setup PCI stuff first */ |
| if (pci_enable_device(oct->pci_dev)) { |
| dev_err(&oct->pci_dev->dev, "pci_enable_device failed\n"); |
| return 1; |
| } |
| |
| if (dma_set_mask_and_coherent(&oct->pci_dev->dev, DMA_BIT_MASK(64))) { |
| dev_err(&oct->pci_dev->dev, "Unexpected DMA device capability\n"); |
| return 1; |
| } |
| |
| /* Enable PCI DMA Master. */ |
| pci_set_master(oct->pci_dev); |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Check Tx queue state for a given network buffer |
| * @param lio per-network private data |
| * @param skb network buffer |
| */ |
| static inline int check_txq_state(struct lio *lio, struct sk_buff *skb) |
| { |
| int q = 0, iq = 0; |
| |
| if (netif_is_multiqueue(lio->netdev)) { |
| q = skb->queue_mapping; |
| iq = lio->linfo.txpciq[(q & (lio->linfo.num_txpciq - 1))]; |
| } else { |
| iq = lio->txq; |
| } |
| |
| if (octnet_iq_is_full(lio->oct_dev, iq)) |
| return 0; |
| wake_q(lio->netdev, q); |
| return 1; |
| } |
| |
| /** |
| * \brief Unmap and free network buffer |
| * @param buf buffer |
| */ |
| static void free_netbuf(void *buf) |
| { |
| struct sk_buff *skb; |
| struct octnet_buf_free_info *finfo; |
| struct lio *lio; |
| |
| finfo = (struct octnet_buf_free_info *)buf; |
| skb = finfo->skb; |
| lio = finfo->lio; |
| |
| dma_unmap_single(&lio->oct_dev->pci_dev->dev, finfo->dptr, skb->len, |
| DMA_TO_DEVICE); |
| |
| check_txq_state(lio, skb); |
| |
| recv_buffer_free((struct sk_buff *)skb); |
| } |
| |
| /** |
| * \brief Unmap and free gather buffer |
| * @param buf buffer |
| */ |
| static void free_netsgbuf(void *buf) |
| { |
| struct octnet_buf_free_info *finfo; |
| struct sk_buff *skb; |
| struct lio *lio; |
| struct octnic_gather *g; |
| int i, frags; |
| |
| finfo = (struct octnet_buf_free_info *)buf; |
| skb = finfo->skb; |
| lio = finfo->lio; |
| g = finfo->g; |
| frags = skb_shinfo(skb)->nr_frags; |
| |
| dma_unmap_single(&lio->oct_dev->pci_dev->dev, |
| g->sg[0].ptr[0], (skb->len - skb->data_len), |
| DMA_TO_DEVICE); |
| |
| i = 1; |
| while (frags--) { |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1]; |
| |
| pci_unmap_page((lio->oct_dev)->pci_dev, |
| g->sg[(i >> 2)].ptr[(i & 3)], |
| frag->size, DMA_TO_DEVICE); |
| i++; |
| } |
| |
| dma_unmap_single(&lio->oct_dev->pci_dev->dev, |
| finfo->dptr, g->sg_size, |
| DMA_TO_DEVICE); |
| |
| spin_lock(&lio->lock); |
| list_add_tail(&g->list, &lio->glist); |
| spin_unlock(&lio->lock); |
| |
| check_txq_state(lio, skb); /* mq support: sub-queue state check */ |
| |
| recv_buffer_free((struct sk_buff *)skb); |
| } |
| |
| /** |
| * \brief Unmap and free gather buffer with response |
| * @param buf buffer |
| */ |
| static void free_netsgbuf_with_resp(void *buf) |
| { |
| struct octeon_soft_command *sc; |
| struct octnet_buf_free_info *finfo; |
| struct sk_buff *skb; |
| struct lio *lio; |
| struct octnic_gather *g; |
| int i, frags; |
| |
| sc = (struct octeon_soft_command *)buf; |
| skb = (struct sk_buff *)sc->callback_arg; |
| finfo = (struct octnet_buf_free_info *)&skb->cb; |
| |
| lio = finfo->lio; |
| g = finfo->g; |
| frags = skb_shinfo(skb)->nr_frags; |
| |
| dma_unmap_single(&lio->oct_dev->pci_dev->dev, |
| g->sg[0].ptr[0], (skb->len - skb->data_len), |
| DMA_TO_DEVICE); |
| |
| i = 1; |
| while (frags--) { |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1]; |
| |
| pci_unmap_page((lio->oct_dev)->pci_dev, |
| g->sg[(i >> 2)].ptr[(i & 3)], |
| frag->size, DMA_TO_DEVICE); |
| i++; |
| } |
| |
| dma_unmap_single(&lio->oct_dev->pci_dev->dev, |
| finfo->dptr, g->sg_size, |
| DMA_TO_DEVICE); |
| |
| spin_lock(&lio->lock); |
| list_add_tail(&g->list, &lio->glist); |
| spin_unlock(&lio->lock); |
| |
| /* Don't free the skb yet */ |
| |
| check_txq_state(lio, skb); |
| } |
| |
| /** |
| * \brief Adjust ptp frequency |
| * @param ptp PTP clock info |
| * @param ppb how much to adjust by, in parts-per-billion |
| */ |
| static int liquidio_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) |
| { |
| struct lio *lio = container_of(ptp, struct lio, ptp_info); |
| struct octeon_device *oct = (struct octeon_device *)lio->oct_dev; |
| u64 comp, delta; |
| unsigned long flags; |
| bool neg_adj = false; |
| |
| if (ppb < 0) { |
| neg_adj = true; |
| ppb = -ppb; |
| } |
| |
| /* The hardware adds the clock compensation value to the |
| * PTP clock on every coprocessor clock cycle, so we |
| * compute the delta in terms of coprocessor clocks. |
| */ |
| delta = (u64)ppb << 32; |
| do_div(delta, oct->coproc_clock_rate); |
| |
| spin_lock_irqsave(&lio->ptp_lock, flags); |
| comp = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_COMP); |
| if (neg_adj) |
| comp -= delta; |
| else |
| comp += delta; |
| lio_pci_writeq(oct, comp, CN6XXX_MIO_PTP_CLOCK_COMP); |
| spin_unlock_irqrestore(&lio->ptp_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Adjust ptp time |
| * @param ptp PTP clock info |
| * @param delta how much to adjust by, in nanosecs |
| */ |
| static int liquidio_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) |
| { |
| unsigned long flags; |
| struct lio *lio = container_of(ptp, struct lio, ptp_info); |
| |
| spin_lock_irqsave(&lio->ptp_lock, flags); |
| lio->ptp_adjust += delta; |
| spin_unlock_irqrestore(&lio->ptp_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Get hardware clock time, including any adjustment |
| * @param ptp PTP clock info |
| * @param ts timespec |
| */ |
| static int liquidio_ptp_gettime(struct ptp_clock_info *ptp, |
| struct timespec64 *ts) |
| { |
| u64 ns; |
| u32 remainder; |
| unsigned long flags; |
| struct lio *lio = container_of(ptp, struct lio, ptp_info); |
| struct octeon_device *oct = (struct octeon_device *)lio->oct_dev; |
| |
| spin_lock_irqsave(&lio->ptp_lock, flags); |
| ns = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_HI); |
| ns += lio->ptp_adjust; |
| spin_unlock_irqrestore(&lio->ptp_lock, flags); |
| |
| ts->tv_sec = div_u64_rem(ns, 1000000000ULL, &remainder); |
| ts->tv_nsec = remainder; |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Set hardware clock time. Reset adjustment |
| * @param ptp PTP clock info |
| * @param ts timespec |
| */ |
| static int liquidio_ptp_settime(struct ptp_clock_info *ptp, |
| const struct timespec64 *ts) |
| { |
| u64 ns; |
| unsigned long flags; |
| struct lio *lio = container_of(ptp, struct lio, ptp_info); |
| struct octeon_device *oct = (struct octeon_device *)lio->oct_dev; |
| |
| ns = timespec_to_ns(ts); |
| |
| spin_lock_irqsave(&lio->ptp_lock, flags); |
| lio_pci_writeq(oct, ns, CN6XXX_MIO_PTP_CLOCK_HI); |
| lio->ptp_adjust = 0; |
| spin_unlock_irqrestore(&lio->ptp_lock, flags); |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Check if PTP is enabled |
| * @param ptp PTP clock info |
| * @param rq request |
| * @param on is it on |
| */ |
| static int liquidio_ptp_enable(struct ptp_clock_info *ptp, |
| struct ptp_clock_request *rq, int on) |
| { |
| return -EOPNOTSUPP; |
| } |
| |
| /** |
| * \brief Open PTP clock source |
| * @param netdev network device |
| */ |
| static void oct_ptp_open(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = (struct octeon_device *)lio->oct_dev; |
| |
| spin_lock_init(&lio->ptp_lock); |
| |
| snprintf(lio->ptp_info.name, 16, "%s", netdev->name); |
| lio->ptp_info.owner = THIS_MODULE; |
| lio->ptp_info.max_adj = 250000000; |
| lio->ptp_info.n_alarm = 0; |
| lio->ptp_info.n_ext_ts = 0; |
| lio->ptp_info.n_per_out = 0; |
| lio->ptp_info.pps = 0; |
| lio->ptp_info.adjfreq = liquidio_ptp_adjfreq; |
| lio->ptp_info.adjtime = liquidio_ptp_adjtime; |
| lio->ptp_info.gettime64 = liquidio_ptp_gettime; |
| lio->ptp_info.settime64 = liquidio_ptp_settime; |
| lio->ptp_info.enable = liquidio_ptp_enable; |
| |
| lio->ptp_adjust = 0; |
| |
| lio->ptp_clock = ptp_clock_register(&lio->ptp_info, |
| &oct->pci_dev->dev); |
| |
| if (IS_ERR(lio->ptp_clock)) |
| lio->ptp_clock = NULL; |
| } |
| |
| /** |
| * \brief Init PTP clock |
| * @param oct octeon device |
| */ |
| static void liquidio_ptp_init(struct octeon_device *oct) |
| { |
| u64 clock_comp, cfg; |
| |
| clock_comp = (u64)NSEC_PER_SEC << 32; |
| do_div(clock_comp, oct->coproc_clock_rate); |
| lio_pci_writeq(oct, clock_comp, CN6XXX_MIO_PTP_CLOCK_COMP); |
| |
| /* Enable */ |
| cfg = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_CFG); |
| lio_pci_writeq(oct, cfg | 0x01, CN6XXX_MIO_PTP_CLOCK_CFG); |
| } |
| |
| /** |
| * \brief Load firmware to device |
| * @param oct octeon device |
| * |
| * Maps device to firmware filename, requests firmware, and downloads it |
| */ |
| static int load_firmware(struct octeon_device *oct) |
| { |
| int ret = 0; |
| const struct firmware *fw; |
| char fw_name[LIO_MAX_FW_FILENAME_LEN]; |
| char *tmp_fw_type; |
| |
| if (strncmp(fw_type, LIO_FW_NAME_TYPE_NONE, |
| sizeof(LIO_FW_NAME_TYPE_NONE)) == 0) { |
| dev_info(&oct->pci_dev->dev, "Skipping firmware load\n"); |
| return ret; |
| } |
| |
| if (fw_type[0] == '\0') |
| tmp_fw_type = LIO_FW_NAME_TYPE_NIC; |
| else |
| tmp_fw_type = fw_type; |
| |
| sprintf(fw_name, "%s%s%s_%s%s", LIO_FW_DIR, LIO_FW_BASE_NAME, |
| octeon_get_conf(oct)->card_name, tmp_fw_type, |
| LIO_FW_NAME_SUFFIX); |
| |
| ret = request_firmware(&fw, fw_name, &oct->pci_dev->dev); |
| if (ret) { |
| dev_err(&oct->pci_dev->dev, "Request firmware failed. Could not find file %s.\n.", |
| fw_name); |
| return ret; |
| } |
| |
| ret = octeon_download_firmware(oct, fw->data, fw->size); |
| |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| /** |
| * \brief Setup output queue |
| * @param oct octeon device |
| * @param q_no which queue |
| * @param num_descs how many descriptors |
| * @param desc_size size of each descriptor |
| * @param app_ctx application context |
| */ |
| static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs, |
| int desc_size, void *app_ctx) |
| { |
| int ret_val = 0; |
| |
| dev_dbg(&oct->pci_dev->dev, "Creating Droq: %d\n", q_no); |
| /* droq creation and local register settings. */ |
| ret_val = octeon_create_droq(oct, q_no, num_descs, desc_size, app_ctx); |
| if (ret_val == -1) |
| return ret_val; |
| |
| if (ret_val == 1) { |
| dev_dbg(&oct->pci_dev->dev, "Using default droq %d\n", q_no); |
| return 0; |
| } |
| /* tasklet creation for the droq */ |
| |
| /* Enable the droq queues */ |
| octeon_set_droq_pkt_op(oct, q_no, 1); |
| |
| /* Send Credit for Octeon Output queues. Credits are always |
| * sent after the output queue is enabled. |
| */ |
| writel(oct->droq[q_no]->max_count, |
| oct->droq[q_no]->pkts_credit_reg); |
| |
| return ret_val; |
| } |
| |
| /** |
| * \brief Callback for getting interface configuration |
| * @param status status of request |
| * @param buf pointer to resp structure |
| */ |
| static void if_cfg_callback(struct octeon_device *oct, |
| u32 status, |
| void *buf) |
| { |
| struct octeon_soft_command *sc = (struct octeon_soft_command *)buf; |
| struct liquidio_if_cfg_resp *resp; |
| struct liquidio_if_cfg_context *ctx; |
| |
| resp = (struct liquidio_if_cfg_resp *)sc->virtrptr; |
| ctx = (struct liquidio_if_cfg_context *)sc->ctxptr; |
| |
| oct = lio_get_device(ctx->octeon_id); |
| if (resp->status) |
| dev_err(&oct->pci_dev->dev, "nic if cfg instruction failed. Status: %llx\n", |
| CVM_CAST64(resp->status)); |
| ACCESS_ONCE(ctx->cond) = 1; |
| |
| /* This barrier is required to be sure that the response has been |
| * written fully before waking up the handler |
| */ |
| wmb(); |
| |
| wake_up_interruptible(&ctx->wc); |
| } |
| |
| /** |
| * \brief Select queue based on hash |
| * @param dev Net device |
| * @param skb sk_buff structure |
| * @returns selected queue number |
| */ |
| static u16 select_q(struct net_device *dev, struct sk_buff *skb, |
| void *accel_priv, select_queue_fallback_t fallback) |
| { |
| int qindex; |
| struct lio *lio; |
| |
| lio = GET_LIO(dev); |
| /* select queue on chosen queue_mapping or core */ |
| qindex = skb_rx_queue_recorded(skb) ? |
| skb_get_rx_queue(skb) : smp_processor_id(); |
| return (u16)(qindex & (lio->linfo.num_txpciq - 1)); |
| } |
| |
| /** Routine to push packets arriving on Octeon interface upto network layer. |
| * @param oct_id - octeon device id. |
| * @param skbuff - skbuff struct to be passed to network layer. |
| * @param len - size of total data received. |
| * @param rh - Control header associated with the packet |
| * @param param - additional control data with the packet |
| */ |
| static void |
| liquidio_push_packet(u32 octeon_id, |
| void *skbuff, |
| u32 len, |
| union octeon_rh *rh, |
| void *param) |
| { |
| struct napi_struct *napi = param; |
| struct octeon_device *oct = lio_get_device(octeon_id); |
| struct sk_buff *skb = (struct sk_buff *)skbuff; |
| struct skb_shared_hwtstamps *shhwtstamps; |
| u64 ns; |
| struct net_device *netdev = |
| (struct net_device *)oct->props[rh->r_dh.link].netdev; |
| struct octeon_droq *droq = container_of(param, struct octeon_droq, |
| napi); |
| if (netdev) { |
| int packet_was_received; |
| struct lio *lio = GET_LIO(netdev); |
| |
| /* Do not proceed if the interface is not in RUNNING state. */ |
| if (!ifstate_check(lio, LIO_IFSTATE_RUNNING)) { |
| recv_buffer_free(skb); |
| droq->stats.rx_dropped++; |
| return; |
| } |
| |
| skb->dev = netdev; |
| |
| if (rh->r_dh.has_hwtstamp) { |
| /* timestamp is included from the hardware at the |
| * beginning of the packet. |
| */ |
| if (ifstate_check(lio, |
| LIO_IFSTATE_RX_TIMESTAMP_ENABLED)) { |
| /* Nanoseconds are in the first 64-bits |
| * of the packet. |
| */ |
| memcpy(&ns, (skb->data), sizeof(ns)); |
| shhwtstamps = skb_hwtstamps(skb); |
| shhwtstamps->hwtstamp = |
| ns_to_ktime(ns + lio->ptp_adjust); |
| } |
| skb_pull(skb, sizeof(ns)); |
| } |
| |
| skb->protocol = eth_type_trans(skb, skb->dev); |
| |
| if ((netdev->features & NETIF_F_RXCSUM) && |
| (rh->r_dh.csum_verified == CNNIC_CSUM_VERIFIED)) |
| /* checksum has already been verified */ |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| else |
| skb->ip_summed = CHECKSUM_NONE; |
| |
| packet_was_received = napi_gro_receive(napi, skb) != GRO_DROP; |
| |
| if (packet_was_received) { |
| droq->stats.rx_bytes_received += len; |
| droq->stats.rx_pkts_received++; |
| netdev->last_rx = jiffies; |
| } else { |
| droq->stats.rx_dropped++; |
| netif_info(lio, rx_err, lio->netdev, |
| "droq:%d error rx_dropped:%llu\n", |
| droq->q_no, droq->stats.rx_dropped); |
| } |
| |
| } else { |
| recv_buffer_free(skb); |
| } |
| } |
| |
| /** |
| * \brief wrapper for calling napi_schedule |
| * @param param parameters to pass to napi_schedule |
| * |
| * Used when scheduling on different CPUs |
| */ |
| static void napi_schedule_wrapper(void *param) |
| { |
| struct napi_struct *napi = param; |
| |
| napi_schedule(napi); |
| } |
| |
| /** |
| * \brief callback when receive interrupt occurs and we are in NAPI mode |
| * @param arg pointer to octeon output queue |
| */ |
| static void liquidio_napi_drv_callback(void *arg) |
| { |
| struct octeon_droq *droq = arg; |
| int this_cpu = smp_processor_id(); |
| |
| if (droq->cpu_id == this_cpu) { |
| napi_schedule(&droq->napi); |
| } else { |
| struct call_single_data *csd = &droq->csd; |
| |
| csd->func = napi_schedule_wrapper; |
| csd->info = &droq->napi; |
| csd->flags = 0; |
| |
| smp_call_function_single_async(droq->cpu_id, csd); |
| } |
| } |
| |
| /** |
| * \brief Main NAPI poll function |
| * @param droq octeon output queue |
| * @param budget maximum number of items to process |
| */ |
| static int liquidio_napi_do_rx(struct octeon_droq *droq, int budget) |
| { |
| int work_done; |
| struct lio *lio = GET_LIO(droq->napi.dev); |
| struct octeon_device *oct = lio->oct_dev; |
| |
| work_done = octeon_process_droq_poll_cmd(oct, droq->q_no, |
| POLL_EVENT_PROCESS_PKTS, |
| budget); |
| if (work_done < 0) { |
| netif_info(lio, rx_err, lio->netdev, |
| "Receive work_done < 0, rxq:%d\n", droq->q_no); |
| goto octnet_napi_finish; |
| } |
| |
| if (work_done > budget) |
| dev_err(&oct->pci_dev->dev, ">>>> %s work_done: %d budget: %d\n", |
| __func__, work_done, budget); |
| |
| return work_done; |
| |
| octnet_napi_finish: |
| napi_complete(&droq->napi); |
| octeon_process_droq_poll_cmd(oct, droq->q_no, POLL_EVENT_ENABLE_INTR, |
| 0); |
| return 0; |
| } |
| |
| /** |
| * \brief Entry point for NAPI polling |
| * @param napi NAPI structure |
| * @param budget maximum number of items to process |
| */ |
| static int liquidio_napi_poll(struct napi_struct *napi, int budget) |
| { |
| struct octeon_droq *droq; |
| int work_done; |
| |
| droq = container_of(napi, struct octeon_droq, napi); |
| |
| work_done = liquidio_napi_do_rx(droq, budget); |
| |
| if (work_done < budget) { |
| napi_complete(napi); |
| octeon_process_droq_poll_cmd(droq->oct_dev, droq->q_no, |
| POLL_EVENT_ENABLE_INTR, 0); |
| return 0; |
| } |
| |
| return work_done; |
| } |
| |
| /** |
| * \brief Setup input and output queues |
| * @param octeon_dev octeon device |
| * @param net_device Net device |
| * |
| * Note: Queues are with respect to the octeon device. Thus |
| * an input queue is for egress packets, and output queues |
| * are for ingress packets. |
| */ |
| static inline int setup_io_queues(struct octeon_device *octeon_dev, |
| struct net_device *net_device) |
| { |
| static int first_time = 1; |
| static struct octeon_droq_ops droq_ops; |
| static int cpu_id; |
| static int cpu_id_modulus; |
| struct octeon_droq *droq; |
| struct napi_struct *napi; |
| int q, q_no, retval = 0; |
| struct lio *lio; |
| int num_tx_descs; |
| |
| lio = GET_LIO(net_device); |
| if (first_time) { |
| first_time = 0; |
| memset(&droq_ops, 0, sizeof(struct octeon_droq_ops)); |
| |
| droq_ops.fptr = liquidio_push_packet; |
| |
| droq_ops.poll_mode = 1; |
| droq_ops.napi_fn = liquidio_napi_drv_callback; |
| cpu_id = 0; |
| cpu_id_modulus = num_present_cpus(); |
| } |
| |
| /* set up DROQs. */ |
| for (q = 0; q < lio->linfo.num_rxpciq; q++) { |
| q_no = lio->linfo.rxpciq[q]; |
| |
| retval = octeon_setup_droq(octeon_dev, q_no, |
| CFG_GET_NUM_RX_DESCS_NIC_IF |
| (octeon_get_conf(octeon_dev), |
| lio->ifidx), |
| CFG_GET_NUM_RX_BUF_SIZE_NIC_IF |
| (octeon_get_conf(octeon_dev), |
| lio->ifidx), NULL); |
| if (retval) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| " %s : Runtime DROQ(RxQ) creation failed.\n", |
| __func__); |
| return 1; |
| } |
| |
| droq = octeon_dev->droq[q_no]; |
| napi = &droq->napi; |
| netif_napi_add(net_device, napi, liquidio_napi_poll, 64); |
| |
| /* designate a CPU for this droq */ |
| droq->cpu_id = cpu_id; |
| cpu_id++; |
| if (cpu_id >= cpu_id_modulus) |
| cpu_id = 0; |
| |
| octeon_register_droq_ops(octeon_dev, q_no, &droq_ops); |
| } |
| |
| /* set up IQs. */ |
| for (q = 0; q < lio->linfo.num_txpciq; q++) { |
| num_tx_descs = CFG_GET_NUM_TX_DESCS_NIC_IF(octeon_get_conf |
| (octeon_dev), |
| lio->ifidx); |
| retval = octeon_setup_iq(octeon_dev, lio->linfo.txpciq[q], |
| num_tx_descs, |
| netdev_get_tx_queue(net_device, q)); |
| if (retval) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| " %s : Runtime IQ(TxQ) creation failed.\n", |
| __func__); |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Poll routine for checking transmit queue status |
| * @param work work_struct data structure |
| */ |
| static void octnet_poll_check_txq_status(struct work_struct *work) |
| { |
| struct cavium_wk *wk = (struct cavium_wk *)work; |
| struct lio *lio = (struct lio *)wk->ctxptr; |
| |
| if (!ifstate_check(lio, LIO_IFSTATE_RUNNING)) |
| return; |
| |
| check_txq_status(lio); |
| queue_delayed_work(lio->txq_status_wq.wq, |
| &lio->txq_status_wq.wk.work, msecs_to_jiffies(1)); |
| } |
| |
| /** |
| * \brief Sets up the txq poll check |
| * @param netdev network device |
| */ |
| static inline void setup_tx_poll_fn(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| |
| lio->txq_status_wq.wq = create_workqueue("txq-status"); |
| if (!lio->txq_status_wq.wq) { |
| dev_err(&oct->pci_dev->dev, "unable to create cavium txq status wq\n"); |
| return; |
| } |
| INIT_DELAYED_WORK(&lio->txq_status_wq.wk.work, |
| octnet_poll_check_txq_status); |
| lio->txq_status_wq.wk.ctxptr = lio; |
| queue_delayed_work(lio->txq_status_wq.wq, |
| &lio->txq_status_wq.wk.work, msecs_to_jiffies(1)); |
| } |
| |
| /** |
| * \brief Net device open for LiquidIO |
| * @param netdev network device |
| */ |
| static int liquidio_open(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| struct napi_struct *napi, *n; |
| |
| list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list) |
| napi_enable(napi); |
| |
| oct_ptp_open(netdev); |
| |
| ifstate_set(lio, LIO_IFSTATE_RUNNING); |
| setup_tx_poll_fn(netdev); |
| start_txq(netdev); |
| |
| netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n"); |
| try_module_get(THIS_MODULE); |
| |
| /* tell Octeon to start forwarding packets to host */ |
| send_rx_ctrl_cmd(lio, 1); |
| |
| /* Ready for link status updates */ |
| lio->intf_open = 1; |
| |
| dev_info(&oct->pci_dev->dev, "%s interface is opened\n", |
| netdev->name); |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Net device stop for LiquidIO |
| * @param netdev network device |
| */ |
| static int liquidio_stop(struct net_device *netdev) |
| { |
| struct napi_struct *napi, *n; |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| |
| netif_info(lio, ifdown, lio->netdev, "Stopping interface!\n"); |
| /* Inform that netif carrier is down */ |
| lio->intf_open = 0; |
| lio->linfo.link.s.status = 0; |
| |
| netif_carrier_off(netdev); |
| |
| /* tell Octeon to stop forwarding packets to host */ |
| send_rx_ctrl_cmd(lio, 0); |
| |
| cancel_delayed_work_sync(&lio->txq_status_wq.wk.work); |
| flush_workqueue(lio->txq_status_wq.wq); |
| destroy_workqueue(lio->txq_status_wq.wq); |
| |
| if (lio->ptp_clock) { |
| ptp_clock_unregister(lio->ptp_clock); |
| lio->ptp_clock = NULL; |
| } |
| |
| ifstate_reset(lio, LIO_IFSTATE_RUNNING); |
| |
| /* This is a hack that allows DHCP to continue working. */ |
| set_bit(__LINK_STATE_START, &lio->netdev->state); |
| |
| list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list) |
| napi_disable(napi); |
| |
| txqs_stop(netdev); |
| |
| dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name); |
| module_put(THIS_MODULE); |
| |
| return 0; |
| } |
| |
| void liquidio_link_ctrl_cmd_completion(void *nctrl_ptr) |
| { |
| struct octnic_ctrl_pkt *nctrl = (struct octnic_ctrl_pkt *)nctrl_ptr; |
| struct net_device *netdev = (struct net_device *)nctrl->netpndev; |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| |
| switch (nctrl->ncmd.s.cmd) { |
| case OCTNET_CMD_CHANGE_DEVFLAGS: |
| case OCTNET_CMD_SET_MULTI_LIST: |
| break; |
| |
| case OCTNET_CMD_CHANGE_MACADDR: |
| /* If command is successful, change the MACADDR. */ |
| netif_info(lio, probe, lio->netdev, " MACAddr changed to 0x%llx\n", |
| CVM_CAST64(nctrl->udd[0])); |
| dev_info(&oct->pci_dev->dev, "%s MACAddr changed to 0x%llx\n", |
| netdev->name, CVM_CAST64(nctrl->udd[0])); |
| memcpy(netdev->dev_addr, ((u8 *)&nctrl->udd[0]) + 2, ETH_ALEN); |
| break; |
| |
| case OCTNET_CMD_CHANGE_MTU: |
| /* If command is successful, change the MTU. */ |
| netif_info(lio, probe, lio->netdev, " MTU Changed from %d to %d\n", |
| netdev->mtu, nctrl->ncmd.s.param2); |
| dev_info(&oct->pci_dev->dev, "%s MTU Changed from %d to %d\n", |
| netdev->name, netdev->mtu, |
| nctrl->ncmd.s.param2); |
| netdev->mtu = nctrl->ncmd.s.param2; |
| break; |
| |
| case OCTNET_CMD_GPIO_ACCESS: |
| netif_info(lio, probe, lio->netdev, "LED Flashing visual identification\n"); |
| |
| break; |
| |
| case OCTNET_CMD_LRO_ENABLE: |
| dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name); |
| break; |
| |
| case OCTNET_CMD_LRO_DISABLE: |
| dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n", |
| netdev->name); |
| break; |
| |
| case OCTNET_CMD_VERBOSE_ENABLE: |
| dev_info(&oct->pci_dev->dev, "%s LRO Enabled\n", netdev->name); |
| break; |
| |
| case OCTNET_CMD_VERBOSE_DISABLE: |
| dev_info(&oct->pci_dev->dev, "%s LRO Disabled\n", |
| netdev->name); |
| break; |
| |
| case OCTNET_CMD_SET_SETTINGS: |
| dev_info(&oct->pci_dev->dev, "%s settings changed\n", |
| netdev->name); |
| |
| break; |
| |
| default: |
| dev_err(&oct->pci_dev->dev, "%s Unknown cmd %d\n", __func__, |
| nctrl->ncmd.s.cmd); |
| } |
| } |
| |
| /** |
| * \brief Converts a mask based on net device flags |
| * @param netdev network device |
| * |
| * This routine generates a octnet_ifflags mask from the net device flags |
| * received from the OS. |
| */ |
| static inline enum octnet_ifflags get_new_flags(struct net_device *netdev) |
| { |
| enum octnet_ifflags f = OCTNET_IFFLAG_UNICAST; |
| |
| if (netdev->flags & IFF_PROMISC) |
| f |= OCTNET_IFFLAG_PROMISC; |
| |
| if (netdev->flags & IFF_ALLMULTI) |
| f |= OCTNET_IFFLAG_ALLMULTI; |
| |
| if (netdev->flags & IFF_MULTICAST) { |
| f |= OCTNET_IFFLAG_MULTICAST; |
| |
| /* Accept all multicast addresses if there are more than we |
| * can handle |
| */ |
| if (netdev_mc_count(netdev) > MAX_OCTEON_MULTICAST_ADDR) |
| f |= OCTNET_IFFLAG_ALLMULTI; |
| } |
| |
| if (netdev->flags & IFF_BROADCAST) |
| f |= OCTNET_IFFLAG_BROADCAST; |
| |
| return f; |
| } |
| |
| /** |
| * \brief Net device set_multicast_list |
| * @param netdev network device |
| */ |
| static void liquidio_set_mcast_list(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| struct octnic_ctrl_pkt nctrl; |
| struct octnic_ctrl_params nparams; |
| struct netdev_hw_addr *ha; |
| u64 *mc; |
| int ret, i; |
| int mc_count = min(netdev_mc_count(netdev), MAX_OCTEON_MULTICAST_ADDR); |
| |
| memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt)); |
| |
| /* Create a ctrl pkt command to be sent to core app. */ |
| nctrl.ncmd.u64 = 0; |
| nctrl.ncmd.s.cmd = OCTNET_CMD_SET_MULTI_LIST; |
| nctrl.ncmd.s.param1 = lio->linfo.ifidx; |
| nctrl.ncmd.s.param2 = get_new_flags(netdev); |
| nctrl.ncmd.s.param3 = mc_count; |
| nctrl.ncmd.s.more = mc_count; |
| nctrl.netpndev = (u64)netdev; |
| nctrl.cb_fn = liquidio_link_ctrl_cmd_completion; |
| |
| /* copy all the addresses into the udd */ |
| i = 0; |
| mc = &nctrl.udd[0]; |
| netdev_for_each_mc_addr(ha, netdev) { |
| *mc = 0; |
| memcpy(((u8 *)mc) + 2, ha->addr, ETH_ALEN); |
| /* no need to swap bytes */ |
| |
| if (++mc > &nctrl.udd[mc_count]) |
| break; |
| } |
| |
| /* Apparently, any activity in this call from the kernel has to |
| * be atomic. So we won't wait for response. |
| */ |
| nctrl.wait_time = 0; |
| |
| nparams.resp_order = OCTEON_RESP_NORESPONSE; |
| |
| ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams); |
| if (ret < 0) { |
| dev_err(&oct->pci_dev->dev, "DEVFLAGS change failed in core (ret: 0x%x)\n", |
| ret); |
| } |
| } |
| |
| /** |
| * \brief Net device set_mac_address |
| * @param netdev network device |
| */ |
| static int liquidio_set_mac(struct net_device *netdev, void *p) |
| { |
| int ret = 0; |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| struct sockaddr *addr = (struct sockaddr *)p; |
| struct octnic_ctrl_pkt nctrl; |
| struct octnic_ctrl_params nparams; |
| |
| if ((!is_valid_ether_addr(addr->sa_data)) || |
| (ifstate_check(lio, LIO_IFSTATE_RUNNING))) |
| return -EADDRNOTAVAIL; |
| |
| memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt)); |
| |
| nctrl.ncmd.u64 = 0; |
| nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MACADDR; |
| nctrl.ncmd.s.param1 = lio->linfo.ifidx; |
| nctrl.ncmd.s.param2 = 0; |
| nctrl.ncmd.s.more = 1; |
| nctrl.netpndev = (u64)netdev; |
| nctrl.cb_fn = liquidio_link_ctrl_cmd_completion; |
| nctrl.wait_time = 100; |
| |
| nctrl.udd[0] = 0; |
| /* The MAC Address is presented in network byte order. */ |
| memcpy((u8 *)&nctrl.udd[0] + 2, addr->sa_data, ETH_ALEN); |
| |
| nparams.resp_order = OCTEON_RESP_ORDERED; |
| |
| ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams); |
| if (ret < 0) { |
| dev_err(&oct->pci_dev->dev, "MAC Address change failed\n"); |
| return -ENOMEM; |
| } |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(((u8 *)&lio->linfo.hw_addr) + 2, addr->sa_data, ETH_ALEN); |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Net device get_stats |
| * @param netdev network device |
| */ |
| static struct net_device_stats *liquidio_get_stats(struct net_device *netdev) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct net_device_stats *stats = &netdev->stats; |
| struct octeon_device *oct; |
| u64 pkts = 0, drop = 0, bytes = 0; |
| struct oct_droq_stats *oq_stats; |
| struct oct_iq_stats *iq_stats; |
| int i, iq_no, oq_no; |
| |
| oct = lio->oct_dev; |
| |
| for (i = 0; i < lio->linfo.num_txpciq; i++) { |
| iq_no = lio->linfo.txpciq[i]; |
| iq_stats = &oct->instr_queue[iq_no]->stats; |
| pkts += iq_stats->tx_done; |
| drop += iq_stats->tx_dropped; |
| bytes += iq_stats->tx_tot_bytes; |
| } |
| |
| stats->tx_packets = pkts; |
| stats->tx_bytes = bytes; |
| stats->tx_dropped = drop; |
| |
| pkts = 0; |
| drop = 0; |
| bytes = 0; |
| |
| for (i = 0; i < lio->linfo.num_rxpciq; i++) { |
| oq_no = lio->linfo.rxpciq[i]; |
| oq_stats = &oct->droq[oq_no]->stats; |
| pkts += oq_stats->rx_pkts_received; |
| drop += (oq_stats->rx_dropped + |
| oq_stats->dropped_nodispatch + |
| oq_stats->dropped_toomany + |
| oq_stats->dropped_nomem); |
| bytes += oq_stats->rx_bytes_received; |
| } |
| |
| stats->rx_bytes = bytes; |
| stats->rx_packets = pkts; |
| stats->rx_dropped = drop; |
| |
| return stats; |
| } |
| |
| /** |
| * \brief Net device change_mtu |
| * @param netdev network device |
| */ |
| static int liquidio_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| struct octnic_ctrl_pkt nctrl; |
| struct octnic_ctrl_params nparams; |
| int max_frm_size = new_mtu + OCTNET_FRM_HEADER_SIZE; |
| int ret = 0; |
| |
| /* Limit the MTU to make sure the ethernet packets are between 64 bytes |
| * and 65535 bytes |
| */ |
| if ((max_frm_size < OCTNET_MIN_FRM_SIZE) || |
| (max_frm_size > OCTNET_MAX_FRM_SIZE)) { |
| dev_err(&oct->pci_dev->dev, "Invalid MTU: %d\n", new_mtu); |
| dev_err(&oct->pci_dev->dev, "Valid range %d and %d\n", |
| (OCTNET_MIN_FRM_SIZE - OCTNET_FRM_HEADER_SIZE), |
| (OCTNET_MAX_FRM_SIZE - OCTNET_FRM_HEADER_SIZE)); |
| return -EINVAL; |
| } |
| |
| memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt)); |
| |
| nctrl.ncmd.u64 = 0; |
| nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MTU; |
| nctrl.ncmd.s.param1 = lio->linfo.ifidx; |
| nctrl.ncmd.s.param2 = new_mtu; |
| nctrl.wait_time = 100; |
| nctrl.netpndev = (u64)netdev; |
| nctrl.cb_fn = liquidio_link_ctrl_cmd_completion; |
| |
| nparams.resp_order = OCTEON_RESP_ORDERED; |
| |
| ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams); |
| if (ret < 0) { |
| dev_err(&oct->pci_dev->dev, "Failed to set MTU\n"); |
| return -1; |
| } |
| |
| lio->mtu = new_mtu; |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Handler for SIOCSHWTSTAMP ioctl |
| * @param netdev network device |
| * @param ifr interface request |
| * @param cmd command |
| */ |
| static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| struct hwtstamp_config conf; |
| struct lio *lio = GET_LIO(netdev); |
| |
| if (copy_from_user(&conf, ifr->ifr_data, sizeof(conf))) |
| return -EFAULT; |
| |
| if (conf.flags) |
| return -EINVAL; |
| |
| switch (conf.tx_type) { |
| case HWTSTAMP_TX_ON: |
| case HWTSTAMP_TX_OFF: |
| break; |
| default: |
| return -ERANGE; |
| } |
| |
| switch (conf.rx_filter) { |
| case HWTSTAMP_FILTER_NONE: |
| break; |
| case HWTSTAMP_FILTER_ALL: |
| case HWTSTAMP_FILTER_SOME: |
| case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: |
| case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: |
| case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: |
| case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: |
| case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: |
| case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: |
| case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: |
| case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: |
| case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: |
| case HWTSTAMP_FILTER_PTP_V2_EVENT: |
| case HWTSTAMP_FILTER_PTP_V2_SYNC: |
| case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: |
| conf.rx_filter = HWTSTAMP_FILTER_ALL; |
| break; |
| default: |
| return -ERANGE; |
| } |
| |
| if (conf.rx_filter == HWTSTAMP_FILTER_ALL) |
| ifstate_set(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED); |
| |
| else |
| ifstate_reset(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED); |
| |
| return copy_to_user(ifr->ifr_data, &conf, sizeof(conf)) ? -EFAULT : 0; |
| } |
| |
| /** |
| * \brief ioctl handler |
| * @param netdev network device |
| * @param ifr interface request |
| * @param cmd command |
| */ |
| static int liquidio_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) |
| { |
| switch (cmd) { |
| case SIOCSHWTSTAMP: |
| return hwtstamp_ioctl(netdev, ifr, cmd); |
| default: |
| return -EOPNOTSUPP; |
| } |
| } |
| |
| /** |
| * \brief handle a Tx timestamp response |
| * @param status response status |
| * @param buf pointer to skb |
| */ |
| static void handle_timestamp(struct octeon_device *oct, |
| u32 status, |
| void *buf) |
| { |
| struct octnet_buf_free_info *finfo; |
| struct octeon_soft_command *sc; |
| struct oct_timestamp_resp *resp; |
| struct lio *lio; |
| struct sk_buff *skb = (struct sk_buff *)buf; |
| |
| finfo = (struct octnet_buf_free_info *)skb->cb; |
| lio = finfo->lio; |
| sc = finfo->sc; |
| oct = lio->oct_dev; |
| resp = (struct oct_timestamp_resp *)sc->virtrptr; |
| |
| if (status != OCTEON_REQUEST_DONE) { |
| dev_err(&oct->pci_dev->dev, "Tx timestamp instruction failed. Status: %llx\n", |
| CVM_CAST64(status)); |
| resp->timestamp = 0; |
| } |
| |
| octeon_swap_8B_data(&resp->timestamp, 1); |
| |
| if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) != 0)) { |
| struct skb_shared_hwtstamps ts; |
| u64 ns = resp->timestamp; |
| |
| netif_info(lio, tx_done, lio->netdev, |
| "Got resulting SKBTX_HW_TSTAMP skb=%p ns=%016llu\n", |
| skb, (unsigned long long)ns); |
| ts.hwtstamp = ns_to_ktime(ns + lio->ptp_adjust); |
| skb_tstamp_tx(skb, &ts); |
| } |
| |
| octeon_free_soft_command(oct, sc); |
| recv_buffer_free(skb); |
| } |
| |
| /* \brief Send a data packet that will be timestamped |
| * @param oct octeon device |
| * @param ndata pointer to network data |
| * @param finfo pointer to private network data |
| */ |
| static inline int send_nic_timestamp_pkt(struct octeon_device *oct, |
| struct octnic_data_pkt *ndata, |
| struct octnet_buf_free_info *finfo, |
| int xmit_more) |
| { |
| int retval; |
| struct octeon_soft_command *sc; |
| struct octeon_instr_ih *ih; |
| struct octeon_instr_rdp *rdp; |
| struct lio *lio; |
| int ring_doorbell; |
| |
| lio = finfo->lio; |
| |
| sc = octeon_alloc_soft_command_resp(oct, &ndata->cmd, |
| sizeof(struct oct_timestamp_resp)); |
| finfo->sc = sc; |
| |
| if (!sc) { |
| dev_err(&oct->pci_dev->dev, "No memory for timestamped data packet\n"); |
| return IQ_SEND_FAILED; |
| } |
| |
| if (ndata->reqtype == REQTYPE_NORESP_NET) |
| ndata->reqtype = REQTYPE_RESP_NET; |
| else if (ndata->reqtype == REQTYPE_NORESP_NET_SG) |
| ndata->reqtype = REQTYPE_RESP_NET_SG; |
| |
| sc->callback = handle_timestamp; |
| sc->callback_arg = finfo->skb; |
| sc->iq_no = ndata->q_no; |
| |
| ih = (struct octeon_instr_ih *)&sc->cmd.ih; |
| rdp = (struct octeon_instr_rdp *)&sc->cmd.rdp; |
| |
| ring_doorbell = !xmit_more; |
| retval = octeon_send_command(oct, sc->iq_no, ring_doorbell, &sc->cmd, |
| sc, ih->dlengsz, ndata->reqtype); |
| |
| if (retval) { |
| dev_err(&oct->pci_dev->dev, "timestamp data packet failed status: %x\n", |
| retval); |
| octeon_free_soft_command(oct, sc); |
| } else { |
| netif_info(lio, tx_queued, lio->netdev, "Queued timestamp packet\n"); |
| } |
| |
| return retval; |
| } |
| |
| static inline int is_ipv4(struct sk_buff *skb) |
| { |
| return (skb->protocol == htons(ETH_P_IP)) && |
| (ip_hdr(skb)->version == 4); |
| } |
| |
| static inline int is_vlan(struct sk_buff *skb) |
| { |
| return skb->protocol == htons(ETH_P_8021Q); |
| } |
| |
| static inline int is_ip_fragmented(struct sk_buff *skb) |
| { |
| /* The Don't fragment and Reserved flag fields are ignored. |
| * IP is fragmented if |
| * - the More fragments bit is set (indicating this IP is a fragment |
| * with more to follow; the current offset could be 0 ). |
| * - ths offset field is non-zero. |
| */ |
| return (ip_hdr(skb)->frag_off & htons(IP_MF | IP_OFFSET)) ? 1 : 0; |
| } |
| |
| static inline int is_ipv6(struct sk_buff *skb) |
| { |
| return (skb->protocol == htons(ETH_P_IPV6)) && |
| (ipv6_hdr(skb)->version == 6); |
| } |
| |
| static inline int is_with_extn_hdr(struct sk_buff *skb) |
| { |
| return (ipv6_hdr(skb)->nexthdr != IPPROTO_TCP) && |
| (ipv6_hdr(skb)->nexthdr != IPPROTO_UDP); |
| } |
| |
| static inline int is_tcpudp(struct sk_buff *skb) |
| { |
| return (ip_hdr(skb)->protocol == IPPROTO_TCP) || |
| (ip_hdr(skb)->protocol == IPPROTO_UDP); |
| } |
| |
| static inline u32 get_ipv4_5tuple_tag(struct sk_buff *skb) |
| { |
| u32 tag; |
| struct iphdr *iphdr = ip_hdr(skb); |
| |
| tag = crc32(0, &iphdr->protocol, 1); |
| tag = crc32(tag, (u8 *)&iphdr->saddr, 8); |
| tag = crc32(tag, skb_transport_header(skb), 4); |
| return tag; |
| } |
| |
| static inline u32 get_ipv6_5tuple_tag(struct sk_buff *skb) |
| { |
| u32 tag; |
| struct ipv6hdr *ipv6hdr = ipv6_hdr(skb); |
| |
| tag = crc32(0, &ipv6hdr->nexthdr, 1); |
| tag = crc32(tag, (u8 *)&ipv6hdr->saddr, 32); |
| tag = crc32(tag, skb_transport_header(skb), 4); |
| return tag; |
| } |
| |
| /** \brief Transmit networks packets to the Octeon interface |
| * @param skbuff skbuff struct to be passed to network layer. |
| * @param netdev pointer to network device |
| * @returns whether the packet was transmitted to the device okay or not |
| * (NETDEV_TX_OK or NETDEV_TX_BUSY) |
| */ |
| static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev) |
| { |
| struct lio *lio; |
| struct octnet_buf_free_info *finfo; |
| union octnic_cmd_setup cmdsetup; |
| struct octnic_data_pkt ndata; |
| struct octeon_device *oct; |
| struct oct_iq_stats *stats; |
| int cpu = 0, status = 0; |
| int q_idx = 0, iq_no = 0; |
| int xmit_more; |
| u32 tag = 0; |
| |
| lio = GET_LIO(netdev); |
| oct = lio->oct_dev; |
| |
| if (netif_is_multiqueue(netdev)) { |
| cpu = skb->queue_mapping; |
| q_idx = (cpu & (lio->linfo.num_txpciq - 1)); |
| iq_no = lio->linfo.txpciq[q_idx]; |
| } else { |
| iq_no = lio->txq; |
| } |
| |
| stats = &oct->instr_queue[iq_no]->stats; |
| |
| /* Check for all conditions in which the current packet cannot be |
| * transmitted. |
| */ |
| if (!(atomic_read(&lio->ifstate) & LIO_IFSTATE_RUNNING) || |
| (!lio->linfo.link.s.status) || |
| (skb->len <= 0)) { |
| netif_info(lio, tx_err, lio->netdev, |
| "Transmit failed link_status : %d\n", |
| lio->linfo.link.s.status); |
| goto lio_xmit_failed; |
| } |
| |
| /* Use space in skb->cb to store info used to unmap and |
| * free the buffers. |
| */ |
| finfo = (struct octnet_buf_free_info *)skb->cb; |
| finfo->lio = lio; |
| finfo->skb = skb; |
| finfo->sc = NULL; |
| |
| /* Prepare the attributes for the data to be passed to OSI. */ |
| memset(&ndata, 0, sizeof(struct octnic_data_pkt)); |
| |
| ndata.buf = (void *)finfo; |
| |
| ndata.q_no = iq_no; |
| |
| if (netif_is_multiqueue(netdev)) { |
| if (octnet_iq_is_full(oct, ndata.q_no)) { |
| /* defer sending if queue is full */ |
| netif_info(lio, tx_err, lio->netdev, "Transmit failed iq:%d full\n", |
| ndata.q_no); |
| stats->tx_iq_busy++; |
| return NETDEV_TX_BUSY; |
| } |
| } else { |
| if (octnet_iq_is_full(oct, lio->txq)) { |
| /* defer sending if queue is full */ |
| stats->tx_iq_busy++; |
| netif_info(lio, tx_err, lio->netdev, "Transmit failed iq:%d full\n", |
| ndata.q_no); |
| return NETDEV_TX_BUSY; |
| } |
| } |
| /* pr_info(" XMIT - valid Qs: %d, 1st Q no: %d, cpu: %d, q_no:%d\n", |
| * lio->linfo.num_txpciq, lio->txq, cpu, ndata.q_no ); |
| */ |
| |
| ndata.datasize = skb->len; |
| |
| cmdsetup.u64 = 0; |
| cmdsetup.s.ifidx = lio->linfo.ifidx; |
| |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { |
| if (is_ipv4(skb) && !is_ip_fragmented(skb) && is_tcpudp(skb)) { |
| tag = get_ipv4_5tuple_tag(skb); |
| |
| cmdsetup.s.cksum_offset = sizeof(struct ethhdr) + 1; |
| |
| if (ip_hdr(skb)->ihl > 5) |
| cmdsetup.s.ipv4opts_ipv6exthdr = |
| OCT_PKT_PARAM_IPV4OPTS; |
| |
| } else if (is_ipv6(skb)) { |
| tag = get_ipv6_5tuple_tag(skb); |
| |
| cmdsetup.s.cksum_offset = sizeof(struct ethhdr) + 1; |
| |
| if (is_with_extn_hdr(skb)) |
| cmdsetup.s.ipv4opts_ipv6exthdr = |
| OCT_PKT_PARAM_IPV6EXTHDR; |
| |
| } else if (is_vlan(skb)) { |
| if (vlan_eth_hdr(skb)->h_vlan_encapsulated_proto |
| == htons(ETH_P_IP) && |
| !is_ip_fragmented(skb) && is_tcpudp(skb)) { |
| tag = get_ipv4_5tuple_tag(skb); |
| |
| cmdsetup.s.cksum_offset = |
| sizeof(struct vlan_ethhdr) + 1; |
| |
| if (ip_hdr(skb)->ihl > 5) |
| cmdsetup.s.ipv4opts_ipv6exthdr = |
| OCT_PKT_PARAM_IPV4OPTS; |
| |
| } else if (vlan_eth_hdr(skb)->h_vlan_encapsulated_proto |
| == htons(ETH_P_IPV6)) { |
| tag = get_ipv6_5tuple_tag(skb); |
| |
| cmdsetup.s.cksum_offset = |
| sizeof(struct vlan_ethhdr) + 1; |
| |
| if (is_with_extn_hdr(skb)) |
| cmdsetup.s.ipv4opts_ipv6exthdr = |
| OCT_PKT_PARAM_IPV6EXTHDR; |
| } |
| } |
| } |
| if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) { |
| skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; |
| cmdsetup.s.timestamp = 1; |
| } |
| |
| if (skb_shinfo(skb)->nr_frags == 0) { |
| cmdsetup.s.u.datasize = skb->len; |
| octnet_prepare_pci_cmd(&ndata.cmd, &cmdsetup, tag); |
| /* Offload checksum calculation for TCP/UDP packets */ |
| ndata.cmd.dptr = dma_map_single(&oct->pci_dev->dev, |
| skb->data, |
| skb->len, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(&oct->pci_dev->dev, ndata.cmd.dptr)) { |
| dev_err(&oct->pci_dev->dev, "%s DMA mapping error 1\n", |
| __func__); |
| return NETDEV_TX_BUSY; |
| } |
| |
| finfo->dptr = ndata.cmd.dptr; |
| |
| ndata.reqtype = REQTYPE_NORESP_NET; |
| |
| } else { |
| int i, frags; |
| struct skb_frag_struct *frag; |
| struct octnic_gather *g; |
| |
| spin_lock(&lio->lock); |
| g = (struct octnic_gather *)list_delete_head(&lio->glist); |
| spin_unlock(&lio->lock); |
| |
| if (!g) { |
| netif_info(lio, tx_err, lio->netdev, |
| "Transmit scatter gather: glist null!\n"); |
| goto lio_xmit_failed; |
| } |
| |
| cmdsetup.s.gather = 1; |
| cmdsetup.s.u.gatherptrs = (skb_shinfo(skb)->nr_frags + 1); |
| octnet_prepare_pci_cmd(&ndata.cmd, &cmdsetup, tag); |
| |
| memset(g->sg, 0, g->sg_size); |
| |
| g->sg[0].ptr[0] = dma_map_single(&oct->pci_dev->dev, |
| skb->data, |
| (skb->len - skb->data_len), |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(&oct->pci_dev->dev, g->sg[0].ptr[0])) { |
| dev_err(&oct->pci_dev->dev, "%s DMA mapping error 2\n", |
| __func__); |
| return NETDEV_TX_BUSY; |
| } |
| add_sg_size(&g->sg[0], (skb->len - skb->data_len), 0); |
| |
| frags = skb_shinfo(skb)->nr_frags; |
| i = 1; |
| while (frags--) { |
| frag = &skb_shinfo(skb)->frags[i - 1]; |
| |
| g->sg[(i >> 2)].ptr[(i & 3)] = |
| dma_map_page(&oct->pci_dev->dev, |
| frag->page.p, |
| frag->page_offset, |
| frag->size, |
| DMA_TO_DEVICE); |
| |
| add_sg_size(&g->sg[(i >> 2)], frag->size, (i & 3)); |
| i++; |
| } |
| |
| ndata.cmd.dptr = dma_map_single(&oct->pci_dev->dev, |
| g->sg, g->sg_size, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(&oct->pci_dev->dev, ndata.cmd.dptr)) { |
| dev_err(&oct->pci_dev->dev, "%s DMA mapping error 3\n", |
| __func__); |
| dma_unmap_single(&oct->pci_dev->dev, g->sg[0].ptr[0], |
| skb->len - skb->data_len, |
| DMA_TO_DEVICE); |
| return NETDEV_TX_BUSY; |
| } |
| |
| finfo->dptr = ndata.cmd.dptr; |
| finfo->g = g; |
| |
| ndata.reqtype = REQTYPE_NORESP_NET_SG; |
| } |
| |
| if (skb_shinfo(skb)->gso_size) { |
| struct octeon_instr_irh *irh = |
| (struct octeon_instr_irh *)&ndata.cmd.irh; |
| union tx_info *tx_info = (union tx_info *)&ndata.cmd.ossp[0]; |
| |
| irh->len = 1; /* to indicate that ossp[0] contains tx_info */ |
| tx_info->s.gso_size = skb_shinfo(skb)->gso_size; |
| tx_info->s.gso_segs = skb_shinfo(skb)->gso_segs; |
| } |
| |
| xmit_more = skb->xmit_more; |
| |
| if (unlikely(cmdsetup.s.timestamp)) |
| status = send_nic_timestamp_pkt(oct, &ndata, finfo, xmit_more); |
| else |
| status = octnet_send_nic_data_pkt(oct, &ndata, xmit_more); |
| if (status == IQ_SEND_FAILED) |
| goto lio_xmit_failed; |
| |
| netif_info(lio, tx_queued, lio->netdev, "Transmit queued successfully\n"); |
| |
| if (status == IQ_SEND_STOP) |
| stop_q(lio->netdev, q_idx); |
| |
| netdev->trans_start = jiffies; |
| |
| stats->tx_done++; |
| stats->tx_tot_bytes += skb->len; |
| |
| return NETDEV_TX_OK; |
| |
| lio_xmit_failed: |
| stats->tx_dropped++; |
| netif_info(lio, tx_err, lio->netdev, "IQ%d Transmit dropped:%llu\n", |
| iq_no, stats->tx_dropped); |
| dma_unmap_single(&oct->pci_dev->dev, ndata.cmd.dptr, |
| ndata.datasize, DMA_TO_DEVICE); |
| recv_buffer_free(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| /** \brief Network device Tx timeout |
| * @param netdev pointer to network device |
| */ |
| static void liquidio_tx_timeout(struct net_device *netdev) |
| { |
| struct lio *lio; |
| |
| lio = GET_LIO(netdev); |
| |
| netif_info(lio, tx_err, lio->netdev, |
| "Transmit timeout tx_dropped:%ld, waking up queues now!!\n", |
| netdev->stats.tx_dropped); |
| netdev->trans_start = jiffies; |
| txqs_wake(netdev); |
| } |
| |
| int liquidio_set_feature(struct net_device *netdev, int cmd) |
| { |
| struct lio *lio = GET_LIO(netdev); |
| struct octeon_device *oct = lio->oct_dev; |
| struct octnic_ctrl_pkt nctrl; |
| struct octnic_ctrl_params nparams; |
| int ret = 0; |
| |
| memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt)); |
| |
| nctrl.ncmd.u64 = 0; |
| nctrl.ncmd.s.cmd = cmd; |
| nctrl.ncmd.s.param1 = lio->linfo.ifidx; |
| nctrl.ncmd.s.param2 = OCTNIC_LROIPV4 | OCTNIC_LROIPV6; |
| nctrl.wait_time = 100; |
| nctrl.netpndev = (u64)netdev; |
| nctrl.cb_fn = liquidio_link_ctrl_cmd_completion; |
| |
| nparams.resp_order = OCTEON_RESP_NORESPONSE; |
| |
| ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl, nparams); |
| if (ret < 0) { |
| dev_err(&oct->pci_dev->dev, "Feature change failed in core (ret: 0x%x)\n", |
| ret); |
| } |
| return ret; |
| } |
| |
| /** \brief Net device fix features |
| * @param netdev pointer to network device |
| * @param request features requested |
| * @returns updated features list |
| */ |
| static netdev_features_t liquidio_fix_features(struct net_device *netdev, |
| netdev_features_t request) |
| { |
| struct lio *lio = netdev_priv(netdev); |
| |
| if ((request & NETIF_F_RXCSUM) && |
| !(lio->dev_capability & NETIF_F_RXCSUM)) |
| request &= ~NETIF_F_RXCSUM; |
| |
| if ((request & NETIF_F_HW_CSUM) && |
| !(lio->dev_capability & NETIF_F_HW_CSUM)) |
| request &= ~NETIF_F_HW_CSUM; |
| |
| if ((request & NETIF_F_TSO) && !(lio->dev_capability & NETIF_F_TSO)) |
| request &= ~NETIF_F_TSO; |
| |
| if ((request & NETIF_F_TSO6) && !(lio->dev_capability & NETIF_F_TSO6)) |
| request &= ~NETIF_F_TSO6; |
| |
| if ((request & NETIF_F_LRO) && !(lio->dev_capability & NETIF_F_LRO)) |
| request &= ~NETIF_F_LRO; |
| |
| /*Disable LRO if RXCSUM is off */ |
| if (!(request & NETIF_F_RXCSUM) && (netdev->features & NETIF_F_LRO) && |
| (lio->dev_capability & NETIF_F_LRO)) |
| request &= ~NETIF_F_LRO; |
| |
| return request; |
| } |
| |
| /** \brief Net device set features |
| * @param netdev pointer to network device |
| * @param features features to enable/disable |
| */ |
| static int liquidio_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct lio *lio = netdev_priv(netdev); |
| |
| if (!((netdev->features ^ features) & NETIF_F_LRO)) |
| return 0; |
| |
| if ((features & NETIF_F_LRO) && (lio->dev_capability & NETIF_F_LRO)) |
| liquidio_set_feature(netdev, OCTNET_CMD_LRO_ENABLE); |
| else if (!(features & NETIF_F_LRO) && |
| (lio->dev_capability & NETIF_F_LRO)) |
| liquidio_set_feature(netdev, OCTNET_CMD_LRO_DISABLE); |
| |
| return 0; |
| } |
| |
| static struct net_device_ops lionetdevops = { |
| .ndo_open = liquidio_open, |
| .ndo_stop = liquidio_stop, |
| .ndo_start_xmit = liquidio_xmit, |
| .ndo_get_stats = liquidio_get_stats, |
| .ndo_set_mac_address = liquidio_set_mac, |
| .ndo_set_rx_mode = liquidio_set_mcast_list, |
| .ndo_tx_timeout = liquidio_tx_timeout, |
| .ndo_change_mtu = liquidio_change_mtu, |
| .ndo_do_ioctl = liquidio_ioctl, |
| .ndo_fix_features = liquidio_fix_features, |
| .ndo_set_features = liquidio_set_features, |
| }; |
| |
| /** \brief Entry point for the liquidio module |
| */ |
| static int __init liquidio_init(void) |
| { |
| int i; |
| struct handshake *hs; |
| |
| init_completion(&first_stage); |
| |
| octeon_init_device_list(conf_type); |
| |
| if (liquidio_init_pci()) |
| return -EINVAL; |
| |
| wait_for_completion_timeout(&first_stage, msecs_to_jiffies(1000)); |
| |
| for (i = 0; i < MAX_OCTEON_DEVICES; i++) { |
| hs = &handshake[i]; |
| if (hs->pci_dev) { |
| wait_for_completion(&hs->init); |
| if (!hs->init_ok) { |
| /* init handshake failed */ |
| dev_err(&hs->pci_dev->dev, |
| "Failed to init device\n"); |
| liquidio_deinit_pci(); |
| return -EIO; |
| } |
| } |
| } |
| |
| for (i = 0; i < MAX_OCTEON_DEVICES; i++) { |
| hs = &handshake[i]; |
| if (hs->pci_dev) { |
| wait_for_completion_timeout(&hs->started, |
| msecs_to_jiffies(30000)); |
| if (!hs->started_ok) { |
| /* starter handshake failed */ |
| dev_err(&hs->pci_dev->dev, |
| "Firmware failed to start\n"); |
| liquidio_deinit_pci(); |
| return -EIO; |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int lio_nic_info(struct octeon_recv_info *recv_info, void *buf) |
| { |
| struct octeon_device *oct = (struct octeon_device *)buf; |
| struct octeon_recv_pkt *recv_pkt = recv_info->recv_pkt; |
| int ifidx = 0; |
| union oct_link_status *ls; |
| int i; |
| |
| if ((recv_pkt->buffer_size[0] != sizeof(*ls)) || |
| (recv_pkt->rh.r_nic_info.ifidx > oct->ifcount)) { |
| dev_err(&oct->pci_dev->dev, "Malformed NIC_INFO, len=%d, ifidx=%d\n", |
| recv_pkt->buffer_size[0], |
| recv_pkt->rh.r_nic_info.ifidx); |
| goto nic_info_err; |
| } |
| |
| ifidx = recv_pkt->rh.r_nic_info.ifidx; |
| ls = (union oct_link_status *)get_rbd(recv_pkt->buffer_ptr[0]); |
| |
| octeon_swap_8B_data((u64 *)ls, (sizeof(union oct_link_status)) >> 3); |
| |
| update_link_status(oct->props[ifidx].netdev, ls); |
| |
| nic_info_err: |
| for (i = 0; i < recv_pkt->buffer_count; i++) |
| recv_buffer_free(recv_pkt->buffer_ptr[i]); |
| octeon_free_recv_info(recv_info); |
| return 0; |
| } |
| |
| /** |
| * \brief Setup network interfaces |
| * @param octeon_dev octeon device |
| * |
| * Called during init time for each device. It assumes the NIC |
| * is already up and running. The link information for each |
| * interface is passed in link_info. |
| */ |
| static int setup_nic_devices(struct octeon_device *octeon_dev) |
| { |
| struct lio *lio = NULL; |
| struct net_device *netdev; |
| u8 mac[6], i, j; |
| struct octeon_soft_command *sc; |
| struct liquidio_if_cfg_context *ctx; |
| struct liquidio_if_cfg_resp *resp; |
| struct octdev_props *props; |
| int retval, num_iqueues, num_oqueues, q_no; |
| u64 q_mask; |
| int num_cpus = num_online_cpus(); |
| union oct_nic_if_cfg if_cfg; |
| unsigned int base_queue; |
| unsigned int gmx_port_id; |
| u32 resp_size, ctx_size; |
| |
| /* This is to handle link status changes */ |
| octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC, |
| OPCODE_NIC_INFO, |
| lio_nic_info, octeon_dev); |
| |
| /* REQTYPE_RESP_NET and REQTYPE_SOFT_COMMAND do not have free functions. |
| * They are handled directly. |
| */ |
| octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_NORESP_NET, |
| free_netbuf); |
| |
| octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_NORESP_NET_SG, |
| free_netsgbuf); |
| |
| octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_RESP_NET_SG, |
| free_netsgbuf_with_resp); |
| |
| for (i = 0; i < octeon_dev->ifcount; i++) { |
| resp_size = sizeof(struct liquidio_if_cfg_resp); |
| ctx_size = sizeof(struct liquidio_if_cfg_context); |
| sc = (struct octeon_soft_command *) |
| octeon_alloc_soft_command(octeon_dev, 0, |
| resp_size, ctx_size); |
| resp = (struct liquidio_if_cfg_resp *)sc->virtrptr; |
| ctx = (struct liquidio_if_cfg_context *)sc->ctxptr; |
| |
| num_iqueues = |
| CFG_GET_NUM_TXQS_NIC_IF(octeon_get_conf(octeon_dev), i); |
| num_oqueues = |
| CFG_GET_NUM_RXQS_NIC_IF(octeon_get_conf(octeon_dev), i); |
| base_queue = |
| CFG_GET_BASE_QUE_NIC_IF(octeon_get_conf(octeon_dev), i); |
| gmx_port_id = |
| CFG_GET_GMXID_NIC_IF(octeon_get_conf(octeon_dev), i); |
| if (num_iqueues > num_cpus) |
| num_iqueues = num_cpus; |
| if (num_oqueues > num_cpus) |
| num_oqueues = num_cpus; |
| dev_dbg(&octeon_dev->pci_dev->dev, |
| "requesting config for interface %d, iqs %d, oqs %d\n", |
| i, num_iqueues, num_oqueues); |
| ACCESS_ONCE(ctx->cond) = 0; |
| ctx->octeon_id = lio_get_device_id(octeon_dev); |
| init_waitqueue_head(&ctx->wc); |
| |
| if_cfg.u64 = 0; |
| if_cfg.s.num_iqueues = num_iqueues; |
| if_cfg.s.num_oqueues = num_oqueues; |
| if_cfg.s.base_queue = base_queue; |
| if_cfg.s.gmx_port_id = gmx_port_id; |
| octeon_prepare_soft_command(octeon_dev, sc, OPCODE_NIC, |
| OPCODE_NIC_IF_CFG, i, |
| if_cfg.u64, 0); |
| |
| sc->callback = if_cfg_callback; |
| sc->callback_arg = sc; |
| sc->wait_time = 1000; |
| |
| retval = octeon_send_soft_command(octeon_dev, sc); |
| if (retval) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| "iq/oq config failed status: %x\n", |
| retval); |
| /* Soft instr is freed by driver in case of failure. */ |
| goto setup_nic_dev_fail; |
| } |
| |
| /* Sleep on a wait queue till the cond flag indicates that the |
| * response arrived or timed-out. |
| */ |
| sleep_cond(&ctx->wc, &ctx->cond); |
| retval = resp->status; |
| if (retval) { |
| dev_err(&octeon_dev->pci_dev->dev, "iq/oq config failed\n"); |
| goto setup_nic_dev_fail; |
| } |
| |
| octeon_swap_8B_data((u64 *)(&resp->cfg_info), |
| (sizeof(struct liquidio_if_cfg_info)) >> 3); |
| |
| num_iqueues = hweight64(resp->cfg_info.iqmask); |
| num_oqueues = hweight64(resp->cfg_info.oqmask); |
| |
| if (!(num_iqueues) || !(num_oqueues)) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| "Got bad iqueues (%016llx) or oqueues (%016llx) from firmware.\n", |
| resp->cfg_info.iqmask, |
| resp->cfg_info.oqmask); |
| goto setup_nic_dev_fail; |
| } |
| dev_dbg(&octeon_dev->pci_dev->dev, |
| "interface %d, iqmask %016llx, oqmask %016llx, numiqueues %d, numoqueues %d\n", |
| i, resp->cfg_info.iqmask, resp->cfg_info.oqmask, |
| num_iqueues, num_oqueues); |
| netdev = alloc_etherdev_mq(LIO_SIZE, num_iqueues); |
| |
| if (!netdev) { |
| dev_err(&octeon_dev->pci_dev->dev, "Device allocation failed\n"); |
| goto setup_nic_dev_fail; |
| } |
| |
| props = &octeon_dev->props[i]; |
| props->netdev = netdev; |
| |
| if (num_iqueues > 1) |
| lionetdevops.ndo_select_queue = select_q; |
| |
| /* Associate the routines that will handle different |
| * netdev tasks. |
| */ |
| netdev->netdev_ops = &lionetdevops; |
| |
| lio = GET_LIO(netdev); |
| |
| memset(lio, 0, sizeof(struct lio)); |
| |
| lio->linfo.ifidx = resp->cfg_info.ifidx; |
| lio->ifidx = resp->cfg_info.ifidx; |
| |
| lio->linfo.num_rxpciq = num_oqueues; |
| lio->linfo.num_txpciq = num_iqueues; |
| q_mask = resp->cfg_info.oqmask; |
| /* q_mask is 0-based and already verified mask is nonzero */ |
| for (j = 0; j < num_oqueues; j++) { |
| q_no = __ffs64(q_mask); |
| q_mask &= (~(1UL << q_no)); |
| lio->linfo.rxpciq[j] = q_no; |
| } |
| q_mask = resp->cfg_info.iqmask; |
| for (j = 0; j < num_iqueues; j++) { |
| q_no = __ffs64(q_mask); |
| q_mask &= (~(1UL << q_no)); |
| lio->linfo.txpciq[j] = q_no; |
| } |
| lio->linfo.hw_addr = resp->cfg_info.linfo.hw_addr; |
| lio->linfo.gmxport = resp->cfg_info.linfo.gmxport; |
| lio->linfo.link.u64 = resp->cfg_info.linfo.link.u64; |
| |
| lio->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); |
| |
| lio->dev_capability = NETIF_F_HIGHDMA |
| | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
| | NETIF_F_SG | NETIF_F_RXCSUM |
| | NETIF_F_TSO | NETIF_F_TSO6 |
| | NETIF_F_LRO; |
| netif_set_gso_max_size(netdev, OCTNIC_GSO_MAX_SIZE); |
| |
| netdev->features = lio->dev_capability; |
| netdev->vlan_features = lio->dev_capability; |
| |
| netdev->hw_features = lio->dev_capability; |
| |
| /* Point to the properties for octeon device to which this |
| * interface belongs. |
| */ |
| lio->oct_dev = octeon_dev; |
| lio->octprops = props; |
| lio->netdev = netdev; |
| spin_lock_init(&lio->lock); |
| |
| dev_dbg(&octeon_dev->pci_dev->dev, |
| "if%d gmx: %d hw_addr: 0x%llx\n", i, |
| lio->linfo.gmxport, CVM_CAST64(lio->linfo.hw_addr)); |
| |
| /* 64-bit swap required on LE machines */ |
| octeon_swap_8B_data(&lio->linfo.hw_addr, 1); |
| for (j = 0; j < 6; j++) |
| mac[j] = *((u8 *)(((u8 *)&lio->linfo.hw_addr) + 2 + j)); |
| |
| /* Copy MAC Address to OS network device structure */ |
| |
| ether_addr_copy(netdev->dev_addr, mac); |
| |
| if (setup_io_queues(octeon_dev, netdev)) { |
| dev_err(&octeon_dev->pci_dev->dev, "I/O queues creation failed\n"); |
| goto setup_nic_dev_fail; |
| } |
| |
| ifstate_set(lio, LIO_IFSTATE_DROQ_OPS); |
| |
| /* By default all interfaces on a single Octeon uses the same |
| * tx and rx queues |
| */ |
| lio->txq = lio->linfo.txpciq[0]; |
| lio->rxq = lio->linfo.rxpciq[0]; |
| |
| lio->tx_qsize = octeon_get_tx_qsize(octeon_dev, lio->txq); |
| lio->rx_qsize = octeon_get_rx_qsize(octeon_dev, lio->rxq); |
| |
| if (setup_glist(lio)) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| "Gather list allocation failed\n"); |
| goto setup_nic_dev_fail; |
| } |
| |
| /* Register ethtool support */ |
| liquidio_set_ethtool_ops(netdev); |
| |
| liquidio_set_feature(netdev, OCTNET_CMD_LRO_ENABLE); |
| |
| if ((debug != -1) && (debug & NETIF_MSG_HW)) |
| liquidio_set_feature(netdev, OCTNET_CMD_VERBOSE_ENABLE); |
| |
| /* Register the network device with the OS */ |
| if (register_netdev(netdev)) { |
| dev_err(&octeon_dev->pci_dev->dev, "Device registration failed\n"); |
| goto setup_nic_dev_fail; |
| } |
| |
| dev_dbg(&octeon_dev->pci_dev->dev, |
| "Setup NIC ifidx:%d mac:%02x%02x%02x%02x%02x%02x\n", |
| i, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); |
| netif_carrier_off(netdev); |
| |
| if (lio->linfo.link.s.status) { |
| netif_carrier_on(netdev); |
| start_txq(netdev); |
| } else { |
| netif_carrier_off(netdev); |
| } |
| |
| ifstate_set(lio, LIO_IFSTATE_REGISTERED); |
| |
| dev_dbg(&octeon_dev->pci_dev->dev, |
| "NIC ifidx:%d Setup successful\n", i); |
| |
| octeon_free_soft_command(octeon_dev, sc); |
| } |
| |
| return 0; |
| |
| setup_nic_dev_fail: |
| |
| octeon_free_soft_command(octeon_dev, sc); |
| |
| while (i--) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| "NIC ifidx:%d Setup failed\n", i); |
| liquidio_destroy_nic_device(octeon_dev, i); |
| } |
| return -ENODEV; |
| } |
| |
| /** |
| * \brief initialize the NIC |
| * @param oct octeon device |
| * |
| * This initialization routine is called once the Octeon device application is |
| * up and running |
| */ |
| static int liquidio_init_nic_module(struct octeon_device *oct) |
| { |
| struct oct_intrmod_cfg *intrmod_cfg; |
| int retval = 0; |
| int num_nic_ports = CFG_GET_NUM_NIC_PORTS(octeon_get_conf(oct)); |
| |
| dev_dbg(&oct->pci_dev->dev, "Initializing network interfaces\n"); |
| |
| /* only default iq and oq were initialized |
| * initialize the rest as well |
| */ |
| /* run port_config command for each port */ |
| oct->ifcount = num_nic_ports; |
| |
| memset(oct->props, 0, |
| sizeof(struct octdev_props) * num_nic_ports); |
| |
| retval = setup_nic_devices(oct); |
| if (retval) { |
| dev_err(&oct->pci_dev->dev, "Setup NIC devices failed\n"); |
| goto octnet_init_failure; |
| } |
| |
| liquidio_ptp_init(oct); |
| |
| /* Initialize interrupt moderation params */ |
| intrmod_cfg = &((struct octeon_device *)oct)->intrmod; |
| intrmod_cfg->intrmod_enable = 1; |
| intrmod_cfg->intrmod_check_intrvl = LIO_INTRMOD_CHECK_INTERVAL; |
| intrmod_cfg->intrmod_maxpkt_ratethr = LIO_INTRMOD_MAXPKT_RATETHR; |
| intrmod_cfg->intrmod_minpkt_ratethr = LIO_INTRMOD_MINPKT_RATETHR; |
| intrmod_cfg->intrmod_maxcnt_trigger = LIO_INTRMOD_MAXCNT_TRIGGER; |
| intrmod_cfg->intrmod_maxtmr_trigger = LIO_INTRMOD_MAXTMR_TRIGGER; |
| intrmod_cfg->intrmod_mintmr_trigger = LIO_INTRMOD_MINTMR_TRIGGER; |
| intrmod_cfg->intrmod_mincnt_trigger = LIO_INTRMOD_MINCNT_TRIGGER; |
| |
| dev_dbg(&oct->pci_dev->dev, "Network interfaces ready\n"); |
| |
| return retval; |
| |
| octnet_init_failure: |
| |
| oct->ifcount = 0; |
| |
| return retval; |
| } |
| |
| /** |
| * \brief starter callback that invokes the remaining initialization work after |
| * the NIC is up and running. |
| * @param octptr work struct work_struct |
| */ |
| static void nic_starter(struct work_struct *work) |
| { |
| struct octeon_device *oct; |
| struct cavium_wk *wk = (struct cavium_wk *)work; |
| |
| oct = (struct octeon_device *)wk->ctxptr; |
| |
| if (atomic_read(&oct->status) == OCT_DEV_RUNNING) |
| return; |
| |
| /* If the status of the device is CORE_OK, the core |
| * application has reported its application type. Call |
| * any registered handlers now and move to the RUNNING |
| * state. |
| */ |
| if (atomic_read(&oct->status) != OCT_DEV_CORE_OK) { |
| schedule_delayed_work(&oct->nic_poll_work.work, |
| LIQUIDIO_STARTER_POLL_INTERVAL_MS); |
| return; |
| } |
| |
| atomic_set(&oct->status, OCT_DEV_RUNNING); |
| |
| if (oct->app_mode && oct->app_mode == CVM_DRV_NIC_APP) { |
| dev_dbg(&oct->pci_dev->dev, "Starting NIC module\n"); |
| |
| if (liquidio_init_nic_module(oct)) |
| dev_err(&oct->pci_dev->dev, "NIC initialization failed\n"); |
| else |
| handshake[oct->octeon_id].started_ok = 1; |
| } else { |
| dev_err(&oct->pci_dev->dev, |
| "Unexpected application running on NIC (%d). Check firmware.\n", |
| oct->app_mode); |
| } |
| |
| complete(&handshake[oct->octeon_id].started); |
| } |
| |
| /** |
| * \brief Device initialization for each Octeon device that is probed |
| * @param octeon_dev octeon device |
| */ |
| static int octeon_device_init(struct octeon_device *octeon_dev) |
| { |
| int j, ret; |
| struct octeon_device_priv *oct_priv = |
| (struct octeon_device_priv *)octeon_dev->priv; |
| atomic_set(&octeon_dev->status, OCT_DEV_BEGIN_STATE); |
| |
| /* Enable access to the octeon device and make its DMA capability |
| * known to the OS. |
| */ |
| if (octeon_pci_os_setup(octeon_dev)) |
| return 1; |
| |
| /* Identify the Octeon type and map the BAR address space. */ |
| if (octeon_chip_specific_setup(octeon_dev)) { |
| dev_err(&octeon_dev->pci_dev->dev, "Chip specific setup failed\n"); |
| return 1; |
| } |
| |
| atomic_set(&octeon_dev->status, OCT_DEV_PCI_MAP_DONE); |
| |
| octeon_dev->app_mode = CVM_DRV_INVALID_APP; |
| |
| /* Do a soft reset of the Octeon device. */ |
| if (octeon_dev->fn_list.soft_reset(octeon_dev)) |
| return 1; |
| |
| /* Initialize the dispatch mechanism used to push packets arriving on |
| * Octeon Output queues. |
| */ |
| if (octeon_init_dispatch_list(octeon_dev)) |
| return 1; |
| |
| octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC, |
| OPCODE_NIC_CORE_DRV_ACTIVE, |
| octeon_core_drv_init, |
| octeon_dev); |
| |
| INIT_DELAYED_WORK(&octeon_dev->nic_poll_work.work, nic_starter); |
| octeon_dev->nic_poll_work.ctxptr = (void *)octeon_dev; |
| schedule_delayed_work(&octeon_dev->nic_poll_work.work, |
| LIQUIDIO_STARTER_POLL_INTERVAL_MS); |
| |
| atomic_set(&octeon_dev->status, OCT_DEV_DISPATCH_INIT_DONE); |
| |
| octeon_set_io_queues_off(octeon_dev); |
| |
| /* Setup the data structures that manage this Octeon's Input queues. */ |
| if (octeon_setup_instr_queues(octeon_dev)) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| "instruction queue initialization failed\n"); |
| /* On error, release any previously allocated queues */ |
| for (j = 0; j < octeon_dev->num_iqs; j++) |
| octeon_delete_instr_queue(octeon_dev, j); |
| return 1; |
| } |
| atomic_set(&octeon_dev->status, OCT_DEV_INSTR_QUEUE_INIT_DONE); |
| |
| /* Initialize soft command buffer pool |
| */ |
| if (octeon_setup_sc_buffer_pool(octeon_dev)) { |
| dev_err(&octeon_dev->pci_dev->dev, "sc buffer pool allocation failed\n"); |
| return 1; |
| } |
| atomic_set(&octeon_dev->status, OCT_DEV_SC_BUFF_POOL_INIT_DONE); |
| |
| /* Initialize lists to manage the requests of different types that |
| * arrive from user & kernel applications for this octeon device. |
| */ |
| if (octeon_setup_response_list(octeon_dev)) { |
| dev_err(&octeon_dev->pci_dev->dev, "Response list allocation failed\n"); |
| return 1; |
| } |
| atomic_set(&octeon_dev->status, OCT_DEV_RESP_LIST_INIT_DONE); |
| |
| if (octeon_setup_output_queues(octeon_dev)) { |
| dev_err(&octeon_dev->pci_dev->dev, "Output queue initialization failed\n"); |
| /* Release any previously allocated queues */ |
| for (j = 0; j < octeon_dev->num_oqs; j++) |
| octeon_delete_droq(octeon_dev, j); |
| } |
| |
| atomic_set(&octeon_dev->status, OCT_DEV_DROQ_INIT_DONE); |
| |
| /* The input and output queue registers were setup earlier (the queues |
| * were not enabled). Any additional registers that need to be |
| * programmed should be done now. |
| */ |
| ret = octeon_dev->fn_list.setup_device_regs(octeon_dev); |
| if (ret) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| "Failed to configure device registers\n"); |
| return ret; |
| } |
| |
| /* Initialize the tasklet that handles output queue packet processing.*/ |
| dev_dbg(&octeon_dev->pci_dev->dev, "Initializing droq tasklet\n"); |
| tasklet_init(&oct_priv->droq_tasklet, octeon_droq_bh, |
| (unsigned long)octeon_dev); |
| |
| /* Setup the interrupt handler and record the INT SUM register address |
| */ |
| octeon_setup_interrupt(octeon_dev); |
| |
| /* Enable Octeon device interrupts */ |
| octeon_dev->fn_list.enable_interrupt(octeon_dev->chip); |
| |
| /* Enable the input and output queues for this Octeon device */ |
| octeon_dev->fn_list.enable_io_queues(octeon_dev); |
| |
| atomic_set(&octeon_dev->status, OCT_DEV_IO_QUEUES_DONE); |
| |
| dev_dbg(&octeon_dev->pci_dev->dev, "Waiting for DDR initialization...\n"); |
| |
| if (ddr_timeout == 0) { |
| dev_info(&octeon_dev->pci_dev->dev, |
| "WAITING. Set ddr_timeout to non-zero value to proceed with initialization.\n"); |
| } |
| |
| schedule_timeout_uninterruptible(HZ * LIO_RESET_SECS); |
| |
| /* Wait for the octeon to initialize DDR after the soft-reset. */ |
| ret = octeon_wait_for_ddr_init(octeon_dev, &ddr_timeout); |
| if (ret) { |
| dev_err(&octeon_dev->pci_dev->dev, |
| "DDR not initialized. Please confirm that board is configured to boot from Flash, ret: %d\n", |
| ret); |
| return 1; |
| } |
| |
| if (octeon_wait_for_bootloader(octeon_dev, 1000) != 0) { |
| dev_err(&octeon_dev->pci_dev->dev, "Board not responding\n"); |
| return 1; |
| } |
| |
| dev_dbg(&octeon_dev->pci_dev->dev, "Initializing consoles\n"); |
| ret = octeon_init_consoles(octeon_dev); |
| if (ret) { |
| dev_err(&octeon_dev->pci_dev->dev, "Could not access board consoles\n"); |
| return 1; |
| } |
| ret = octeon_add_console(octeon_dev, 0); |
| if (ret) { |
| dev_err(&octeon_dev->pci_dev->dev, "Could not access board console\n"); |
| return 1; |
| } |
| |
| atomic_set(&octeon_dev->status, OCT_DEV_CONSOLE_INIT_DONE); |
| |
| dev_dbg(&octeon_dev->pci_dev->dev, "Loading firmware\n"); |
| ret = load_firmware(octeon_dev); |
| if (ret) { |
| dev_err(&octeon_dev->pci_dev->dev, "Could not load firmware to board\n"); |
| return 1; |
| } |
| |
| handshake[octeon_dev->octeon_id].init_ok = 1; |
| complete(&handshake[octeon_dev->octeon_id].init); |
| |
| atomic_set(&octeon_dev->status, OCT_DEV_HOST_OK); |
| |
| /* Send Credit for Octeon Output queues. Credits are always sent after |
| * the output queue is enabled. |
| */ |
| for (j = 0; j < octeon_dev->num_oqs; j++) |
| writel(octeon_dev->droq[j]->max_count, |
| octeon_dev->droq[j]->pkts_credit_reg); |
| |
| /* Packets can start arriving on the output queues from this point. */ |
| |
| return 0; |
| } |
| |
| /** |
| * \brief Exits the module |
| */ |
| static void __exit liquidio_exit(void) |
| { |
| liquidio_deinit_pci(); |
| |
| pr_info("LiquidIO network module is now unloaded\n"); |
| } |
| |
| module_init(liquidio_init); |
| module_exit(liquidio_exit); |