blob: e9bd89406c4cb7cac33e59201c0271b8fd17cabd [file] [log] [blame]
/*
* P2041RDB Device Tree Source
*
* Copyright 2011 - 2014 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
compatible = "fsl,P2041RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
memory {
device_type = "memory";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bman_fbpr: bman-fbpr {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
};
bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x200000>;
};
qportals: qman-portals@ff4200000 {
ranges = <0x0 0xf 0xf4200000 0x200000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
label = "u-boot";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@kernel {
label = "kernel";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@dtb {
label = "dtb";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@fs {
label = "file system";
reg = <0x00700000 0x00900000>;
};
};
};
i2c@118000 {
lm75b@48 {
compatible = "nxp,lm75a";
reg = <0x48>;
};
eeprom@50 {
compatible = "at24,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
adt7461@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
};
i2c@118100 {
eeprom@50 {
compatible = "at24,24c256";
reg = <0x50>;
};
};
usb1: usb@211000 {
dr_mode = "host";
};
};
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
1 0 0xf 0xffa00000 0x00040000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x08000000>;
bank-width = <2>;
device-width = <2>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x40000>;
partition@0 {
label = "NAND U-Boot Image";
reg = <0x0 0x02000000>;
read-only;
};
partition@2000000 {
label = "NAND Root File System";
reg = <0x02000000 0x10000000>;
};
partition@12000000 {
label = "NAND Compressed RFS Image";
reg = <0x12000000 0x08000000>;
};
partition@1a000000 {
label = "NAND Linux Kernel Image";
reg = <0x1a000000 0x04000000>;
};
partition@1e000000 {
label = "NAND DTB Image";
reg = <0x1e000000 0x01000000>;
};
partition@1f000000 {
label = "NAND Writable User area";
reg = <0x1f000000 0x01000000>;
};
};
};
pci0: pcie@ffe200000 {
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe201000 {
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe202000 {
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
};
/include/ "p2041si-post.dtsi"