| /* |
| * Allwinner sun4i MUSB Glue Layer |
| * |
| * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com> |
| * |
| * Based on code from |
| * Allwinner Technology Co., Ltd. <www.allwinnertech.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/err.h> |
| #include <linux/extcon.h> |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy-sun4i-usb.h> |
| #include <linux/platform_device.h> |
| #include <linux/reset.h> |
| #include <linux/soc/sunxi/sunxi_sram.h> |
| #include <linux/usb/musb.h> |
| #include <linux/usb/of.h> |
| #include <linux/usb/usb_phy_generic.h> |
| #include <linux/workqueue.h> |
| #include "musb_core.h" |
| |
| /* |
| * Register offsets, note sunxi musb has a different layout then most |
| * musb implementations, we translate the layout in musb_readb & friends. |
| */ |
| #define SUNXI_MUSB_POWER 0x0040 |
| #define SUNXI_MUSB_DEVCTL 0x0041 |
| #define SUNXI_MUSB_INDEX 0x0042 |
| #define SUNXI_MUSB_VEND0 0x0043 |
| #define SUNXI_MUSB_INTRTX 0x0044 |
| #define SUNXI_MUSB_INTRRX 0x0046 |
| #define SUNXI_MUSB_INTRTXE 0x0048 |
| #define SUNXI_MUSB_INTRRXE 0x004a |
| #define SUNXI_MUSB_INTRUSB 0x004c |
| #define SUNXI_MUSB_INTRUSBE 0x0050 |
| #define SUNXI_MUSB_FRAME 0x0054 |
| #define SUNXI_MUSB_TXFIFOSZ 0x0090 |
| #define SUNXI_MUSB_TXFIFOADD 0x0092 |
| #define SUNXI_MUSB_RXFIFOSZ 0x0094 |
| #define SUNXI_MUSB_RXFIFOADD 0x0096 |
| #define SUNXI_MUSB_FADDR 0x0098 |
| #define SUNXI_MUSB_TXFUNCADDR 0x0098 |
| #define SUNXI_MUSB_TXHUBADDR 0x009a |
| #define SUNXI_MUSB_TXHUBPORT 0x009b |
| #define SUNXI_MUSB_RXFUNCADDR 0x009c |
| #define SUNXI_MUSB_RXHUBADDR 0x009e |
| #define SUNXI_MUSB_RXHUBPORT 0x009f |
| #define SUNXI_MUSB_CONFIGDATA 0x00c0 |
| |
| /* VEND0 bits */ |
| #define SUNXI_MUSB_VEND0_PIO_MODE 0 |
| |
| /* flags */ |
| #define SUNXI_MUSB_FL_ENABLED 0 |
| #define SUNXI_MUSB_FL_HOSTMODE 1 |
| #define SUNXI_MUSB_FL_HOSTMODE_PEND 2 |
| #define SUNXI_MUSB_FL_VBUS_ON 3 |
| #define SUNXI_MUSB_FL_PHY_ON 4 |
| #define SUNXI_MUSB_FL_HAS_SRAM 5 |
| #define SUNXI_MUSB_FL_HAS_RESET 6 |
| #define SUNXI_MUSB_FL_NO_CONFIGDATA 7 |
| |
| /* Our read/write methods need access and do not get passed in a musb ref :| */ |
| static struct musb *sunxi_musb; |
| |
| struct sunxi_glue { |
| struct device *dev; |
| struct platform_device *musb; |
| struct clk *clk; |
| struct reset_control *rst; |
| struct phy *phy; |
| struct platform_device *usb_phy; |
| struct usb_phy *xceiv; |
| unsigned long flags; |
| struct work_struct work; |
| struct extcon_dev *extcon; |
| struct notifier_block host_nb; |
| }; |
| |
| /* phy_power_on / off may sleep, so we use a workqueue */ |
| static void sunxi_musb_work(struct work_struct *work) |
| { |
| struct sunxi_glue *glue = container_of(work, struct sunxi_glue, work); |
| bool vbus_on, phy_on; |
| |
| if (!test_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) |
| return; |
| |
| if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) { |
| struct musb *musb = platform_get_drvdata(glue->musb); |
| unsigned long flags; |
| u8 devctl; |
| |
| spin_lock_irqsave(&musb->lock, flags); |
| |
| devctl = readb(musb->mregs + SUNXI_MUSB_DEVCTL); |
| if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { |
| set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); |
| musb->xceiv->otg->default_a = 1; |
| musb->xceiv->otg->state = OTG_STATE_A_IDLE; |
| MUSB_HST_MODE(musb); |
| devctl |= MUSB_DEVCTL_SESSION; |
| } else { |
| clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); |
| musb->xceiv->otg->default_a = 0; |
| musb->xceiv->otg->state = OTG_STATE_B_IDLE; |
| MUSB_DEV_MODE(musb); |
| devctl &= ~MUSB_DEVCTL_SESSION; |
| } |
| writeb(devctl, musb->mregs + SUNXI_MUSB_DEVCTL); |
| |
| spin_unlock_irqrestore(&musb->lock, flags); |
| } |
| |
| vbus_on = test_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); |
| phy_on = test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); |
| |
| if (phy_on != vbus_on) { |
| if (vbus_on) { |
| phy_power_on(glue->phy); |
| set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); |
| } else { |
| phy_power_off(glue->phy); |
| clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); |
| } |
| } |
| } |
| |
| static void sunxi_musb_set_vbus(struct musb *musb, int is_on) |
| { |
| struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); |
| |
| if (is_on) |
| set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); |
| else |
| clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); |
| |
| schedule_work(&glue->work); |
| } |
| |
| static void sunxi_musb_pre_root_reset_end(struct musb *musb) |
| { |
| struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); |
| |
| sun4i_usb_phy_set_squelch_detect(glue->phy, false); |
| } |
| |
| static void sunxi_musb_post_root_reset_end(struct musb *musb) |
| { |
| struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); |
| |
| sun4i_usb_phy_set_squelch_detect(glue->phy, true); |
| } |
| |
| static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci) |
| { |
| struct musb *musb = __hci; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&musb->lock, flags); |
| |
| musb->int_usb = readb(musb->mregs + SUNXI_MUSB_INTRUSB); |
| if (musb->int_usb) |
| writeb(musb->int_usb, musb->mregs + SUNXI_MUSB_INTRUSB); |
| |
| /* |
| * sunxi musb often signals babble on low / full speed device |
| * disconnect, without ever raising MUSB_INTR_DISCONNECT, since |
| * normally babble never happens treat it as disconnect. |
| */ |
| if ((musb->int_usb & MUSB_INTR_BABBLE) && is_host_active(musb)) { |
| musb->int_usb &= ~MUSB_INTR_BABBLE; |
| musb->int_usb |= MUSB_INTR_DISCONNECT; |
| } |
| |
| if ((musb->int_usb & MUSB_INTR_RESET) && !is_host_active(musb)) { |
| /* ep0 FADDR must be 0 when (re)entering peripheral mode */ |
| musb_ep_select(musb->mregs, 0); |
| musb_writeb(musb->mregs, MUSB_FADDR, 0); |
| } |
| |
| musb->int_tx = readw(musb->mregs + SUNXI_MUSB_INTRTX); |
| if (musb->int_tx) |
| writew(musb->int_tx, musb->mregs + SUNXI_MUSB_INTRTX); |
| |
| musb->int_rx = readw(musb->mregs + SUNXI_MUSB_INTRRX); |
| if (musb->int_rx) |
| writew(musb->int_rx, musb->mregs + SUNXI_MUSB_INTRRX); |
| |
| musb_interrupt(musb); |
| |
| spin_unlock_irqrestore(&musb->lock, flags); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int sunxi_musb_host_notifier(struct notifier_block *nb, |
| unsigned long event, void *ptr) |
| { |
| struct sunxi_glue *glue = container_of(nb, struct sunxi_glue, host_nb); |
| |
| if (event) |
| set_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); |
| else |
| clear_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags); |
| |
| set_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags); |
| schedule_work(&glue->work); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int sunxi_musb_init(struct musb *musb) |
| { |
| struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); |
| int ret; |
| |
| sunxi_musb = musb; |
| musb->phy = glue->phy; |
| musb->xceiv = glue->xceiv; |
| |
| if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) { |
| ret = sunxi_sram_claim(musb->controller->parent); |
| if (ret) |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(glue->clk); |
| if (ret) |
| goto error_sram_release; |
| |
| if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { |
| ret = reset_control_deassert(glue->rst); |
| if (ret) |
| goto error_clk_disable; |
| } |
| |
| writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); |
| |
| /* Register notifier before calling phy_init() */ |
| if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) { |
| ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, |
| &glue->host_nb); |
| if (ret) |
| goto error_reset_assert; |
| } |
| |
| ret = phy_init(glue->phy); |
| if (ret) |
| goto error_unregister_notifier; |
| |
| if (musb->port_mode == MUSB_PORT_MODE_HOST) { |
| ret = phy_power_on(glue->phy); |
| if (ret) |
| goto error_phy_exit; |
| set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); |
| /* Stop musb work from turning vbus off again */ |
| set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); |
| } |
| |
| musb->isr = sunxi_musb_interrupt; |
| |
| /* Stop the musb-core from doing runtime pm (not supported on sunxi) */ |
| pm_runtime_get(musb->controller); |
| |
| return 0; |
| |
| error_phy_exit: |
| phy_exit(glue->phy); |
| error_unregister_notifier: |
| if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) |
| extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, |
| &glue->host_nb); |
| error_reset_assert: |
| if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) |
| reset_control_assert(glue->rst); |
| error_clk_disable: |
| clk_disable_unprepare(glue->clk); |
| error_sram_release: |
| if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) |
| sunxi_sram_release(musb->controller->parent); |
| return ret; |
| } |
| |
| static int sunxi_musb_exit(struct musb *musb) |
| { |
| struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); |
| |
| pm_runtime_put(musb->controller); |
| |
| cancel_work_sync(&glue->work); |
| if (test_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags)) |
| phy_power_off(glue->phy); |
| |
| phy_exit(glue->phy); |
| |
| if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) |
| extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, |
| &glue->host_nb); |
| |
| if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) |
| reset_control_assert(glue->rst); |
| |
| clk_disable_unprepare(glue->clk); |
| if (test_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags)) |
| sunxi_sram_release(musb->controller->parent); |
| |
| return 0; |
| } |
| |
| static void sunxi_musb_enable(struct musb *musb) |
| { |
| struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); |
| |
| /* musb_core does not call us in a balanced manner */ |
| if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) |
| return; |
| |
| schedule_work(&glue->work); |
| } |
| |
| static void sunxi_musb_disable(struct musb *musb) |
| { |
| struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); |
| |
| clear_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags); |
| } |
| |
| struct dma_controller *sunxi_musb_dma_controller_create(struct musb *musb, |
| void __iomem *base) |
| { |
| return NULL; |
| } |
| |
| void sunxi_musb_dma_controller_destroy(struct dma_controller *c) |
| { |
| } |
| |
| /* |
| * sunxi musb register layout |
| * 0x00 - 0x17 fifo regs, 1 long per fifo |
| * 0x40 - 0x57 generic control regs (power - frame) |
| * 0x80 - 0x8f ep control regs (addressed through hw_ep->regs, indexed) |
| * 0x90 - 0x97 fifo control regs (indexed) |
| * 0x98 - 0x9f multipoint / busctl regs (indexed) |
| * 0xc0 configdata reg |
| */ |
| |
| static u32 sunxi_musb_fifo_offset(u8 epnum) |
| { |
| return (epnum * 4); |
| } |
| |
| static u32 sunxi_musb_ep_offset(u8 epnum, u16 offset) |
| { |
| WARN_ONCE(offset != 0, |
| "sunxi_musb_ep_offset called with non 0 offset\n"); |
| |
| return 0x80; /* indexed, so ignore epnum */ |
| } |
| |
| static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset) |
| { |
| return SUNXI_MUSB_TXFUNCADDR + offset; |
| } |
| |
| static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset) |
| { |
| struct sunxi_glue *glue; |
| |
| if (addr == sunxi_musb->mregs) { |
| /* generic control or fifo control reg access */ |
| switch (offset) { |
| case MUSB_FADDR: |
| return readb(addr + SUNXI_MUSB_FADDR); |
| case MUSB_POWER: |
| return readb(addr + SUNXI_MUSB_POWER); |
| case MUSB_INTRUSB: |
| return readb(addr + SUNXI_MUSB_INTRUSB); |
| case MUSB_INTRUSBE: |
| return readb(addr + SUNXI_MUSB_INTRUSBE); |
| case MUSB_INDEX: |
| return readb(addr + SUNXI_MUSB_INDEX); |
| case MUSB_TESTMODE: |
| return 0; /* No testmode on sunxi */ |
| case MUSB_DEVCTL: |
| return readb(addr + SUNXI_MUSB_DEVCTL); |
| case MUSB_TXFIFOSZ: |
| return readb(addr + SUNXI_MUSB_TXFIFOSZ); |
| case MUSB_RXFIFOSZ: |
| return readb(addr + SUNXI_MUSB_RXFIFOSZ); |
| case MUSB_CONFIGDATA + 0x10: /* See musb_read_configdata() */ |
| glue = dev_get_drvdata(sunxi_musb->controller->parent); |
| /* A33 saves a reg, and we get to hardcode this */ |
| if (test_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, |
| &glue->flags)) |
| return 0xde; |
| |
| return readb(addr + SUNXI_MUSB_CONFIGDATA); |
| /* Offset for these is fixed by sunxi_musb_busctl_offset() */ |
| case SUNXI_MUSB_TXFUNCADDR: |
| case SUNXI_MUSB_TXHUBADDR: |
| case SUNXI_MUSB_TXHUBPORT: |
| case SUNXI_MUSB_RXFUNCADDR: |
| case SUNXI_MUSB_RXHUBADDR: |
| case SUNXI_MUSB_RXHUBPORT: |
| /* multipoint / busctl reg access */ |
| return readb(addr + offset); |
| default: |
| dev_err(sunxi_musb->controller->parent, |
| "Error unknown readb offset %u\n", offset); |
| return 0; |
| } |
| } else if (addr == (sunxi_musb->mregs + 0x80)) { |
| /* ep control reg access */ |
| /* sunxi has a 2 byte hole before the txtype register */ |
| if (offset >= MUSB_TXTYPE) |
| offset += 2; |
| return readb(addr + offset); |
| } |
| |
| dev_err(sunxi_musb->controller->parent, |
| "Error unknown readb at 0x%x bytes offset\n", |
| (int)(addr - sunxi_musb->mregs)); |
| return 0; |
| } |
| |
| static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data) |
| { |
| if (addr == sunxi_musb->mregs) { |
| /* generic control or fifo control reg access */ |
| switch (offset) { |
| case MUSB_FADDR: |
| return writeb(data, addr + SUNXI_MUSB_FADDR); |
| case MUSB_POWER: |
| return writeb(data, addr + SUNXI_MUSB_POWER); |
| case MUSB_INTRUSB: |
| return writeb(data, addr + SUNXI_MUSB_INTRUSB); |
| case MUSB_INTRUSBE: |
| return writeb(data, addr + SUNXI_MUSB_INTRUSBE); |
| case MUSB_INDEX: |
| return writeb(data, addr + SUNXI_MUSB_INDEX); |
| case MUSB_TESTMODE: |
| if (data) |
| dev_warn(sunxi_musb->controller->parent, |
| "sunxi-musb does not have testmode\n"); |
| return; |
| case MUSB_DEVCTL: |
| return writeb(data, addr + SUNXI_MUSB_DEVCTL); |
| case MUSB_TXFIFOSZ: |
| return writeb(data, addr + SUNXI_MUSB_TXFIFOSZ); |
| case MUSB_RXFIFOSZ: |
| return writeb(data, addr + SUNXI_MUSB_RXFIFOSZ); |
| /* Offset for these is fixed by sunxi_musb_busctl_offset() */ |
| case SUNXI_MUSB_TXFUNCADDR: |
| case SUNXI_MUSB_TXHUBADDR: |
| case SUNXI_MUSB_TXHUBPORT: |
| case SUNXI_MUSB_RXFUNCADDR: |
| case SUNXI_MUSB_RXHUBADDR: |
| case SUNXI_MUSB_RXHUBPORT: |
| /* multipoint / busctl reg access */ |
| return writeb(data, addr + offset); |
| default: |
| dev_err(sunxi_musb->controller->parent, |
| "Error unknown writeb offset %u\n", offset); |
| return; |
| } |
| } else if (addr == (sunxi_musb->mregs + 0x80)) { |
| /* ep control reg access */ |
| if (offset >= MUSB_TXTYPE) |
| offset += 2; |
| return writeb(data, addr + offset); |
| } |
| |
| dev_err(sunxi_musb->controller->parent, |
| "Error unknown writeb at 0x%x bytes offset\n", |
| (int)(addr - sunxi_musb->mregs)); |
| } |
| |
| static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset) |
| { |
| if (addr == sunxi_musb->mregs) { |
| /* generic control or fifo control reg access */ |
| switch (offset) { |
| case MUSB_INTRTX: |
| return readw(addr + SUNXI_MUSB_INTRTX); |
| case MUSB_INTRRX: |
| return readw(addr + SUNXI_MUSB_INTRRX); |
| case MUSB_INTRTXE: |
| return readw(addr + SUNXI_MUSB_INTRTXE); |
| case MUSB_INTRRXE: |
| return readw(addr + SUNXI_MUSB_INTRRXE); |
| case MUSB_FRAME: |
| return readw(addr + SUNXI_MUSB_FRAME); |
| case MUSB_TXFIFOADD: |
| return readw(addr + SUNXI_MUSB_TXFIFOADD); |
| case MUSB_RXFIFOADD: |
| return readw(addr + SUNXI_MUSB_RXFIFOADD); |
| case MUSB_HWVERS: |
| return 0; /* sunxi musb version is not known */ |
| default: |
| dev_err(sunxi_musb->controller->parent, |
| "Error unknown readw offset %u\n", offset); |
| return 0; |
| } |
| } else if (addr == (sunxi_musb->mregs + 0x80)) { |
| /* ep control reg access */ |
| return readw(addr + offset); |
| } |
| |
| dev_err(sunxi_musb->controller->parent, |
| "Error unknown readw at 0x%x bytes offset\n", |
| (int)(addr - sunxi_musb->mregs)); |
| return 0; |
| } |
| |
| static void sunxi_musb_writew(void __iomem *addr, unsigned offset, u16 data) |
| { |
| if (addr == sunxi_musb->mregs) { |
| /* generic control or fifo control reg access */ |
| switch (offset) { |
| case MUSB_INTRTX: |
| return writew(data, addr + SUNXI_MUSB_INTRTX); |
| case MUSB_INTRRX: |
| return writew(data, addr + SUNXI_MUSB_INTRRX); |
| case MUSB_INTRTXE: |
| return writew(data, addr + SUNXI_MUSB_INTRTXE); |
| case MUSB_INTRRXE: |
| return writew(data, addr + SUNXI_MUSB_INTRRXE); |
| case MUSB_FRAME: |
| return writew(data, addr + SUNXI_MUSB_FRAME); |
| case MUSB_TXFIFOADD: |
| return writew(data, addr + SUNXI_MUSB_TXFIFOADD); |
| case MUSB_RXFIFOADD: |
| return writew(data, addr + SUNXI_MUSB_RXFIFOADD); |
| default: |
| dev_err(sunxi_musb->controller->parent, |
| "Error unknown writew offset %u\n", offset); |
| return; |
| } |
| } else if (addr == (sunxi_musb->mregs + 0x80)) { |
| /* ep control reg access */ |
| return writew(data, addr + offset); |
| } |
| |
| dev_err(sunxi_musb->controller->parent, |
| "Error unknown writew at 0x%x bytes offset\n", |
| (int)(addr - sunxi_musb->mregs)); |
| } |
| |
| static const struct musb_platform_ops sunxi_musb_ops = { |
| .quirks = MUSB_INDEXED_EP, |
| .init = sunxi_musb_init, |
| .exit = sunxi_musb_exit, |
| .enable = sunxi_musb_enable, |
| .disable = sunxi_musb_disable, |
| .fifo_offset = sunxi_musb_fifo_offset, |
| .ep_offset = sunxi_musb_ep_offset, |
| .busctl_offset = sunxi_musb_busctl_offset, |
| .readb = sunxi_musb_readb, |
| .writeb = sunxi_musb_writeb, |
| .readw = sunxi_musb_readw, |
| .writew = sunxi_musb_writew, |
| .dma_init = sunxi_musb_dma_controller_create, |
| .dma_exit = sunxi_musb_dma_controller_destroy, |
| .set_vbus = sunxi_musb_set_vbus, |
| .pre_root_reset_end = sunxi_musb_pre_root_reset_end, |
| .post_root_reset_end = sunxi_musb_post_root_reset_end, |
| }; |
| |
| /* Allwinner OTG supports up to 5 endpoints */ |
| #define SUNXI_MUSB_MAX_EP_NUM 6 |
| #define SUNXI_MUSB_RAM_BITS 11 |
| |
| static struct musb_fifo_cfg sunxi_musb_mode_cfg[] = { |
| MUSB_EP_FIFO_SINGLE(1, FIFO_TX, 512), |
| MUSB_EP_FIFO_SINGLE(1, FIFO_RX, 512), |
| MUSB_EP_FIFO_SINGLE(2, FIFO_TX, 512), |
| MUSB_EP_FIFO_SINGLE(2, FIFO_RX, 512), |
| MUSB_EP_FIFO_SINGLE(3, FIFO_TX, 512), |
| MUSB_EP_FIFO_SINGLE(3, FIFO_RX, 512), |
| MUSB_EP_FIFO_SINGLE(4, FIFO_TX, 512), |
| MUSB_EP_FIFO_SINGLE(4, FIFO_RX, 512), |
| MUSB_EP_FIFO_SINGLE(5, FIFO_TX, 512), |
| MUSB_EP_FIFO_SINGLE(5, FIFO_RX, 512), |
| }; |
| |
| static struct musb_hdrc_config sunxi_musb_hdrc_config = { |
| .fifo_cfg = sunxi_musb_mode_cfg, |
| .fifo_cfg_size = ARRAY_SIZE(sunxi_musb_mode_cfg), |
| .multipoint = true, |
| .dyn_fifo = true, |
| .soft_con = true, |
| .num_eps = SUNXI_MUSB_MAX_EP_NUM, |
| .ram_bits = SUNXI_MUSB_RAM_BITS, |
| .dma = 0, |
| }; |
| |
| static int sunxi_musb_probe(struct platform_device *pdev) |
| { |
| struct musb_hdrc_platform_data pdata; |
| struct platform_device_info pinfo; |
| struct sunxi_glue *glue; |
| struct device_node *np = pdev->dev.of_node; |
| int ret; |
| |
| if (!np) { |
| dev_err(&pdev->dev, "Error no device tree node found\n"); |
| return -EINVAL; |
| } |
| |
| glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); |
| if (!glue) |
| return -ENOMEM; |
| |
| memset(&pdata, 0, sizeof(pdata)); |
| switch (usb_get_dr_mode(&pdev->dev)) { |
| #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST |
| case USB_DR_MODE_HOST: |
| pdata.mode = MUSB_PORT_MODE_HOST; |
| break; |
| #endif |
| #ifdef CONFIG_USB_MUSB_DUAL_ROLE |
| case USB_DR_MODE_OTG: |
| glue->extcon = extcon_get_edev_by_phandle(&pdev->dev, 0); |
| if (IS_ERR(glue->extcon)) { |
| if (PTR_ERR(glue->extcon) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_err(&pdev->dev, "Invalid or missing extcon\n"); |
| return PTR_ERR(glue->extcon); |
| } |
| pdata.mode = MUSB_PORT_MODE_DUAL_ROLE; |
| break; |
| #endif |
| default: |
| dev_err(&pdev->dev, "Invalid or missing 'dr_mode' property\n"); |
| return -EINVAL; |
| } |
| pdata.platform_ops = &sunxi_musb_ops; |
| pdata.config = &sunxi_musb_hdrc_config; |
| |
| glue->dev = &pdev->dev; |
| INIT_WORK(&glue->work, sunxi_musb_work); |
| glue->host_nb.notifier_call = sunxi_musb_host_notifier; |
| |
| if (of_device_is_compatible(np, "allwinner,sun4i-a10-musb")) |
| set_bit(SUNXI_MUSB_FL_HAS_SRAM, &glue->flags); |
| |
| if (of_device_is_compatible(np, "allwinner,sun6i-a31-musb")) |
| set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); |
| |
| if (of_device_is_compatible(np, "allwinner,sun8i-a33-musb")) { |
| set_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags); |
| set_bit(SUNXI_MUSB_FL_NO_CONFIGDATA, &glue->flags); |
| } |
| |
| glue->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(glue->clk)) { |
| dev_err(&pdev->dev, "Error getting clock: %ld\n", |
| PTR_ERR(glue->clk)); |
| return PTR_ERR(glue->clk); |
| } |
| |
| if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) { |
| glue->rst = devm_reset_control_get(&pdev->dev, NULL); |
| if (IS_ERR(glue->rst)) { |
| if (PTR_ERR(glue->rst) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_err(&pdev->dev, "Error getting reset %ld\n", |
| PTR_ERR(glue->rst)); |
| return PTR_ERR(glue->rst); |
| } |
| } |
| |
| glue->phy = devm_phy_get(&pdev->dev, "usb"); |
| if (IS_ERR(glue->phy)) { |
| if (PTR_ERR(glue->phy) == -EPROBE_DEFER) |
| return -EPROBE_DEFER; |
| dev_err(&pdev->dev, "Error getting phy %ld\n", |
| PTR_ERR(glue->phy)); |
| return PTR_ERR(glue->phy); |
| } |
| |
| glue->usb_phy = usb_phy_generic_register(); |
| if (IS_ERR(glue->usb_phy)) { |
| dev_err(&pdev->dev, "Error registering usb-phy %ld\n", |
| PTR_ERR(glue->usb_phy)); |
| return PTR_ERR(glue->usb_phy); |
| } |
| |
| glue->xceiv = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); |
| if (IS_ERR(glue->xceiv)) { |
| ret = PTR_ERR(glue->xceiv); |
| dev_err(&pdev->dev, "Error getting usb-phy %d\n", ret); |
| goto err_unregister_usb_phy; |
| } |
| |
| platform_set_drvdata(pdev, glue); |
| |
| memset(&pinfo, 0, sizeof(pinfo)); |
| pinfo.name = "musb-hdrc"; |
| pinfo.id = PLATFORM_DEVID_AUTO; |
| pinfo.parent = &pdev->dev; |
| pinfo.res = pdev->resource; |
| pinfo.num_res = pdev->num_resources; |
| pinfo.data = &pdata; |
| pinfo.size_data = sizeof(pdata); |
| |
| glue->musb = platform_device_register_full(&pinfo); |
| if (IS_ERR(glue->musb)) { |
| ret = PTR_ERR(glue->musb); |
| dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret); |
| goto err_unregister_usb_phy; |
| } |
| |
| return 0; |
| |
| err_unregister_usb_phy: |
| usb_phy_generic_unregister(glue->usb_phy); |
| return ret; |
| } |
| |
| static int sunxi_musb_remove(struct platform_device *pdev) |
| { |
| struct sunxi_glue *glue = platform_get_drvdata(pdev); |
| struct platform_device *usb_phy = glue->usb_phy; |
| |
| platform_device_unregister(glue->musb); /* Frees glue ! */ |
| usb_phy_generic_unregister(usb_phy); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id sunxi_musb_match[] = { |
| { .compatible = "allwinner,sun4i-a10-musb", }, |
| { .compatible = "allwinner,sun6i-a31-musb", }, |
| { .compatible = "allwinner,sun8i-a33-musb", }, |
| {} |
| }; |
| |
| static struct platform_driver sunxi_musb_driver = { |
| .probe = sunxi_musb_probe, |
| .remove = sunxi_musb_remove, |
| .driver = { |
| .name = "musb-sunxi", |
| .of_match_table = sunxi_musb_match, |
| }, |
| }; |
| module_platform_driver(sunxi_musb_driver); |
| |
| MODULE_DESCRIPTION("Allwinner sunxi MUSB Glue Layer"); |
| MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); |
| MODULE_LICENSE("GPL v2"); |