drivers/scsi/pcmcia/aha152x_stub.c - kernel/bruno - Git at Google

 /*======================================================================

     A driver for Adaptec AHA152X-compatible PCMCIA SCSI cards.

     This driver supports the Adaptec AHA-1460, the New Media Bus
     Toaster, and the New Media Toast & Jam.

     aha152x_cs.c 1.54 2000/06/12 21:27:25

     The contents of this file are subject to the Mozilla Public
     License Version 1.1 (the "License"); you may not use this file
     except in compliance with the License. You may obtain a copy of
     the License at http://www.mozilla.org/MPL/

     Software distributed under the License is distributed on an "AS
     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
     implied. See the License for the specific language governing
     rights and limitations under the License.

     The initial developer of the original code is David A. Hinds
     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
     are Copyright (C) 1999 David A. Hinds.  All Rights Reserved.

     Alternatively, the contents of this file may be used under the
     terms of the GNU General Public License version 2 (the "GPL"), in which
     case the provisions of the GPL are applicable instead of the
     above.  If you wish to allow the use of your version of this file
     only under the terms of the GPL and not to allow others to use
     your version of this file under the MPL, indicate your decision
     by deleting the provisions above and replace them with the notice
     and other provisions required by the GPL.  If you do not delete
     the provisions above, a recipient may use your version of this
     file under either the MPL or the GPL.

 ======================================================================*/

 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
 #include <scsi/scsi.h>
 #include <linux/major.h>
 #include <linux/blkdev.h>
 #include <scsi/scsi_ioctl.h>

 #include "scsi.h"
 #include <scsi/scsi_host.h>
 #include "aha152x.h"

 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>


 /*====================================================================*/

 /* Parameters that can be set with 'insmod' */

 /* SCSI bus setup options */
 static int host_id = 7;
 static int reconnect = 1;
 static int parity = 1;
 static int synchronous = 1;
 static int reset_delay = 100;
 static int ext_trans = 0;

 module_param(host_id, int, 0);
 module_param(reconnect, int, 0);
 module_param(parity, int, 0);
 module_param(synchronous, int, 0);
 module_param(reset_delay, int, 0);
 module_param(ext_trans, int, 0);

 MODULE_LICENSE("Dual MPL/GPL");

 /*====================================================================*/

 typedef struct scsi_info_t {
 	struct pcmcia_device	*p_dev;
     struct Scsi_Host	*host;
 } scsi_info_t;

 static void aha152x_release_cs(struct pcmcia_device *link);
 static void aha152x_detach(struct pcmcia_device *p_dev);
 static int aha152x_config_cs(struct pcmcia_device *link);

 static int aha152x_probe(struct pcmcia_device *link)
 {
     scsi_info_t *info;

     dev_dbg(&link->dev, "aha152x_attach()\n");

     /* Create new SCSI device */
     info = kzalloc(sizeof(*info), GFP_KERNEL);
     if (!info) return -ENOMEM;
     info->p_dev = link;
     link->priv = info;

     link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
     link->config_regs = PRESENT_OPTION;

     return aha152x_config_cs(link);
 } /* aha152x_attach */

 /*====================================================================*/

 static void aha152x_detach(struct pcmcia_device *link)
 {
     dev_dbg(&link->dev, "aha152x_detach\n");

     aha152x_release_cs(link);

     /* Unlink device structure, free bits */
     kfree(link->priv);
 } /* aha152x_detach */

 /*====================================================================*/

 static int aha152x_config_check(struct pcmcia_device *p_dev, void *priv_data)
 {
 	p_dev->io_lines = 10;

 	/* For New Media T&J, look for a SCSI window */
 	if ((p_dev->resource[0]->end < 0x20) &&
 		(p_dev->resource[1]->end >= 0x20))
 		p_dev->resource[0]->start = p_dev->resource[1]->start;

 	if (p_dev->resource[0]->start >= 0xffff)
 		return -EINVAL;

 	p_dev->resource[1]->start = p_dev->resource[1]->end = 0;
 	p_dev->resource[0]->end = 0x20;
 	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;

 	return pcmcia_request_io(p_dev);
 }

 static int aha152x_config_cs(struct pcmcia_device *link)
 {
     scsi_info_t *info = link->priv;
     struct aha152x_setup s;
     int ret;
     struct Scsi_Host *host;

     dev_dbg(&link->dev, "aha152x_config\n");

     ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
     if (ret)
 	    goto failed;

     if (!link->irq)
 	    goto failed;

     ret = pcmcia_enable_device(link);
     if (ret)
 	    goto failed;

     /* Set configuration options for the aha152x driver */
     memset(&s, 0, sizeof(s));
     s.conf        = "PCMCIA setup";
     s.io_port     = link->resource[0]->start;
     s.irq         = link->irq;
     s.scsiid      = host_id;
     s.reconnect   = reconnect;
     s.parity      = parity;
     s.synchronous = synchronous;
     s.delay       = reset_delay;
     if (ext_trans)
         s.ext_trans = ext_trans;

     host = aha152x_probe_one(&s);
     if (host == NULL) {
 	printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
 	goto failed;
     }

     info->host = host;

     return 0;

 failed:
     aha152x_release_cs(link);
     return -ENODEV;
 }

 static void aha152x_release_cs(struct pcmcia_device *link)
 {
 	scsi_info_t *info = link->priv;

 	aha152x_release(info->host);
 	pcmcia_disable_device(link);
 }

 static int aha152x_resume(struct pcmcia_device *link)
 {
 	scsi_info_t *info = link->priv;

 	aha152x_host_reset_host(info->host);

 	return 0;
 }

 static struct pcmcia_device_id aha152x_ids[] = {
 	PCMCIA_DEVICE_PROD_ID123("New Media", "SCSI", "Bus Toaster", 0xcdf7e4cc, 0x35f26476, 0xa8851d6e),
 	PCMCIA_DEVICE_PROD_ID123("NOTEWORTHY", "SCSI", "Bus Toaster", 0xad89c6e8, 0x35f26476, 0xa8851d6e),
 	PCMCIA_DEVICE_PROD_ID12("Adaptec, Inc.", "APA-1460 SCSI Host Adapter", 0x24ba9738, 0x3a3c3d20),
 	PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Multimedia Sound/SCSI", 0x085a850b, 0x80a6535c),
 	PCMCIA_DEVICE_PROD_ID12("NOTEWORTHY", "NWCOMB02 SCSI/AUDIO COMBO CARD", 0xad89c6e8, 0x5f9a615b),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, aha152x_ids);

 static struct pcmcia_driver aha152x_cs_driver = {
 	.owner		= THIS_MODULE,
 	.name		= "aha152x_cs",
 	.probe		= aha152x_probe,
 	.remove		= aha152x_detach,
 	.id_table       = aha152x_ids,
 	.resume		= aha152x_resume,
 };

 static int __init init_aha152x_cs(void)
 {
 	return pcmcia_register_driver(&aha152x_cs_driver);
 }

 static void __exit exit_aha152x_cs(void)
 {
 	pcmcia_unregister_driver(&aha152x_cs_driver);
 }

 module_init(init_aha152x_cs);
 module_exit(exit_aha152x_cs);
	/*======================================================================

	A driver for Adaptec AHA152X-compatible PCMCIA SCSI cards.

	This driver supports the Adaptec AHA-1460, the New Media Bus
	Toaster, and the New Media Toast & Jam.

	aha152x_cs.c 1.54 2000/06/12 21:27:25

	The contents of this file are subject to the Mozilla Public
	License Version 1.1 (the "License"); you may not use this file
	except in compliance with the License. You may obtain a copy of
	the License at http://www.mozilla.org/MPL/

	Software distributed under the License is distributed on an "AS
	IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
	implied. See the License for the specific language governing
	rights and limitations under the License.

	The initial developer of the original code is David A. Hinds
	<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
	are Copyright (C) 1999 David A. Hinds. All Rights Reserved.

	Alternatively, the contents of this file may be used under the
	terms of the GNU General Public License version 2 (the "GPL"), in which
	case the provisions of the GPL are applicable instead of the
	above. If you wish to allow the use of your version of this file
	only under the terms of the GPL and not to allow others to use
	your version of this file under the MPL, indicate your decision
	by deleting the provisions above and replace them with the notice
	and other provisions required by the GPL. If you do not delete
	the provisions above, a recipient may use your version of this
	file under either the MPL or the GPL.

	======================================================================*/

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/slab.h>
	#include <linux/string.h>
	#include <linux/ioport.h>
	#include <scsi/scsi.h>
	#include <linux/major.h>
	#include <linux/blkdev.h>
	#include <scsi/scsi_ioctl.h>

	#include "scsi.h"
	#include <scsi/scsi_host.h>
	#include "aha152x.h"

	#include <pcmcia/cistpl.h>
	#include <pcmcia/ds.h>


	/====================================================================/

	/* Parameters that can be set with 'insmod' */

	/* SCSI bus setup options */
	static int host_id = 7;
	static int reconnect = 1;
	static int parity = 1;
	static int synchronous = 1;
	static int reset_delay = 100;
	static int ext_trans = 0;

	module_param(host_id, int, 0);
	module_param(reconnect, int, 0);
	module_param(parity, int, 0);
	module_param(synchronous, int, 0);
	module_param(reset_delay, int, 0);
	module_param(ext_trans, int, 0);

	MODULE_LICENSE("Dual MPL/GPL");

	/====================================================================/

	typedef struct scsi_info_t {
	struct pcmcia_device *p_dev;
	struct Scsi_Host *host;
	} scsi_info_t;

	static void aha152x_release_cs(struct pcmcia_device *link);
	static void aha152x_detach(struct pcmcia_device *p_dev);
	static int aha152x_config_cs(struct pcmcia_device *link);

	static int aha152x_probe(struct pcmcia_device *link)
	{
	scsi_info_t *info;

	dev_dbg(&link->dev, "aha152x_attach()\n");

	/* Create new SCSI device */
	info = kzalloc(sizeof(*info), GFP_KERNEL);
	if (!info) return -ENOMEM;
	info->p_dev = link;
	link->priv = info;

	link->config_flags \|= CONF_ENABLE_IRQ \| CONF_AUTO_SET_IO;
	link->config_regs = PRESENT_OPTION;

	return aha152x_config_cs(link);
	} /* aha152x_attach */

	/====================================================================/

	static void aha152x_detach(struct pcmcia_device *link)
	{
	dev_dbg(&link->dev, "aha152x_detach\n");

	aha152x_release_cs(link);

	/* Unlink device structure, free bits */
	kfree(link->priv);
	} /* aha152x_detach */

	/====================================================================/

	static int aha152x_config_check(struct pcmcia_device p_dev, void priv_data)
	{
	p_dev->io_lines = 10;

	/* For New Media T&J, look for a SCSI window */
	if ((p_dev->resource[0]->end < 0x20) &&
	(p_dev->resource[1]->end >= 0x20))
	p_dev->resource[0]->start = p_dev->resource[1]->start;

	if (p_dev->resource[0]->start >= 0xffff)
	return -EINVAL;

	p_dev->resource[1]->start = p_dev->resource[1]->end = 0;
	p_dev->resource[0]->end = 0x20;
	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
	p_dev->resource[0]->flags \|= IO_DATA_PATH_WIDTH_AUTO;

	return pcmcia_request_io(p_dev);
	}

	static int aha152x_config_cs(struct pcmcia_device *link)
	{
	scsi_info_t *info = link->priv;
	struct aha152x_setup s;
	int ret;
	struct Scsi_Host *host;

	dev_dbg(&link->dev, "aha152x_config\n");

	ret = pcmcia_loop_config(link, aha152x_config_check, NULL);
	if (ret)
	goto failed;

	if (!link->irq)
	goto failed;

	ret = pcmcia_enable_device(link);
	if (ret)
	goto failed;

	/* Set configuration options for the aha152x driver */
	memset(&s, 0, sizeof(s));
	s.conf = "PCMCIA setup";
	s.io_port = link->resource[0]->start;
	s.irq = link->irq;
	s.scsiid = host_id;
	s.reconnect = reconnect;
	s.parity = parity;
	s.synchronous = synchronous;
	s.delay = reset_delay;
	if (ext_trans)
	s.ext_trans = ext_trans;

	host = aha152x_probe_one(&s);
	if (host == NULL) {
	printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
	goto failed;
	}

	info->host = host;

	return 0;

	failed:
	aha152x_release_cs(link);
	return -ENODEV;
	}

	static void aha152x_release_cs(struct pcmcia_device *link)
	{
	scsi_info_t *info = link->priv;

	aha152x_release(info->host);
	pcmcia_disable_device(link);
	}

	static int aha152x_resume(struct pcmcia_device *link)
	{
	scsi_info_t *info = link->priv;

	aha152x_host_reset_host(info->host);

	return 0;
	}

	static struct pcmcia_device_id aha152x_ids[] = {
	PCMCIA_DEVICE_PROD_ID123("New Media", "SCSI", "Bus Toaster", 0xcdf7e4cc, 0x35f26476, 0xa8851d6e),
	PCMCIA_DEVICE_PROD_ID123("NOTEWORTHY", "SCSI", "Bus Toaster", 0xad89c6e8, 0x35f26476, 0xa8851d6e),
	PCMCIA_DEVICE_PROD_ID12("Adaptec, Inc.", "APA-1460 SCSI Host Adapter", 0x24ba9738, 0x3a3c3d20),
	PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Multimedia Sound/SCSI", 0x085a850b, 0x80a6535c),
	PCMCIA_DEVICE_PROD_ID12("NOTEWORTHY", "NWCOMB02 SCSI/AUDIO COMBO CARD", 0xad89c6e8, 0x5f9a615b),
	PCMCIA_DEVICE_NULL,
	};
	MODULE_DEVICE_TABLE(pcmcia, aha152x_ids);

	static struct pcmcia_driver aha152x_cs_driver = {
	.owner = THIS_MODULE,
	.name = "aha152x_cs",
	.probe = aha152x_probe,
	.remove = aha152x_detach,
	.id_table = aha152x_ids,
	.resume = aha152x_resume,
	};

	static int __init init_aha152x_cs(void)
	{
	return pcmcia_register_driver(&aha152x_cs_driver);
	}

	static void __exit exit_aha152x_cs(void)
	{
	pcmcia_unregister_driver(&aha152x_cs_driver);
	}

	module_init(init_aha152x_cs);
	module_exit(exit_aha152x_cs);