| /* |
| * CS5536 General timer functions |
| * |
| * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology |
| * Author: Yanhua, yanh@lemote.com |
| * |
| * Copyright (C) 2009 Lemote Inc. |
| * Author: Wu zhangjin, wuzhangjin@gmail.com |
| * |
| * Reference: AMD Geode(TM) CS5536 Companion Device Data Book |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/jiffies.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/clockchips.h> |
| |
| #include <asm/time.h> |
| |
| #include <cs5536/cs5536_mfgpt.h> |
| |
| DEFINE_SPINLOCK(mfgpt_lock); |
| EXPORT_SYMBOL(mfgpt_lock); |
| |
| static u32 mfgpt_base; |
| |
| /* |
| * Initialize the MFGPT timer. |
| * |
| * This is also called after resume to bring the MFGPT into operation again. |
| */ |
| |
| /* disable counter */ |
| void disable_mfgpt0_counter(void) |
| { |
| outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); |
| } |
| EXPORT_SYMBOL(disable_mfgpt0_counter); |
| |
| /* enable counter, comparator2 to event mode, 14.318MHz clock */ |
| void enable_mfgpt0_counter(void) |
| { |
| outw(0xe310, MFGPT0_SETUP); |
| } |
| EXPORT_SYMBOL(enable_mfgpt0_counter); |
| |
| static void init_mfgpt_timer(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| spin_lock(&mfgpt_lock); |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ |
| outw(0, MFGPT0_CNT); /* set counter to 0 */ |
| enable_mfgpt0_counter(); |
| break; |
| |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_UNUSED: |
| if (evt->mode == CLOCK_EVT_MODE_PERIODIC || |
| evt->mode == CLOCK_EVT_MODE_ONESHOT) |
| disable_mfgpt0_counter(); |
| break; |
| |
| case CLOCK_EVT_MODE_ONESHOT: |
| /* The oneshot mode have very high deviation, Not use it! */ |
| break; |
| |
| case CLOCK_EVT_MODE_RESUME: |
| /* Nothing to do here */ |
| break; |
| } |
| spin_unlock(&mfgpt_lock); |
| } |
| |
| static struct clock_event_device mfgpt_clockevent = { |
| .name = "mfgpt", |
| .features = CLOCK_EVT_FEAT_PERIODIC, |
| .set_mode = init_mfgpt_timer, |
| .irq = CS5536_MFGPT_INTR, |
| }; |
| |
| static irqreturn_t timer_interrupt(int irq, void *dev_id) |
| { |
| u32 basehi; |
| |
| /* |
| * get MFGPT base address |
| * |
| * NOTE: do not remove me, it's need for the value of mfgpt_base is |
| * variable |
| */ |
| _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); |
| |
| /* ack */ |
| outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); |
| |
| mfgpt_clockevent.event_handler(&mfgpt_clockevent); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction irq5 = { |
| .handler = timer_interrupt, |
| .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, |
| .name = "timer" |
| }; |
| |
| /* |
| * Initialize the conversion factor and the min/max deltas of the clock event |
| * structure and register the clock event source with the framework. |
| */ |
| void __init setup_mfgpt0_timer(void) |
| { |
| u32 basehi; |
| struct clock_event_device *cd = &mfgpt_clockevent; |
| unsigned int cpu = smp_processor_id(); |
| |
| cd->cpumask = cpumask_of(cpu); |
| clockevent_set_clock(cd, MFGPT_TICK_RATE); |
| cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); |
| cd->min_delta_ns = clockevent_delta2ns(0xf, cd); |
| |
| /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ |
| _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); |
| |
| /* Enable Interrupt Gate 5 */ |
| _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); |
| |
| /* get MFGPT base address */ |
| _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); |
| |
| clockevents_register_device(cd); |
| |
| setup_irq(CS5536_MFGPT_INTR, &irq5); |
| } |
| |
| /* |
| * Since the MFGPT overflows every tick, its not very useful |
| * to just read by itself. So use jiffies to emulate a free |
| * running counter: |
| */ |
| static cycle_t mfgpt_read(struct clocksource *cs) |
| { |
| unsigned long flags; |
| int count; |
| u32 jifs; |
| static int old_count; |
| static u32 old_jifs; |
| |
| spin_lock_irqsave(&mfgpt_lock, flags); |
| /* |
| * Although our caller may have the read side of xtime_lock, |
| * this is now a seqlock, and we are cheating in this routine |
| * by having side effects on state that we cannot undo if |
| * there is a collision on the seqlock and our caller has to |
| * retry. (Namely, old_jifs and old_count.) So we must treat |
| * jiffies as volatile despite the lock. We read jiffies |
| * before latching the timer count to guarantee that although |
| * the jiffies value might be older than the count (that is, |
| * the counter may underflow between the last point where |
| * jiffies was incremented and the point where we latch the |
| * count), it cannot be newer. |
| */ |
| jifs = jiffies; |
| /* read the count */ |
| count = inw(MFGPT0_CNT); |
| |
| /* |
| * It's possible for count to appear to go the wrong way for this |
| * reason: |
| * |
| * The timer counter underflows, but we haven't handled the resulting |
| * interrupt and incremented jiffies yet. |
| * |
| * Previous attempts to handle these cases intelligently were buggy, so |
| * we just do the simple thing now. |
| */ |
| if (count < old_count && jifs == old_jifs) |
| count = old_count; |
| |
| old_count = count; |
| old_jifs = jifs; |
| |
| spin_unlock_irqrestore(&mfgpt_lock, flags); |
| |
| return (cycle_t) (jifs * COMPARE) + count; |
| } |
| |
| static struct clocksource clocksource_mfgpt = { |
| .name = "mfgpt", |
| .rating = 120, /* Functional for real use, but not desired */ |
| .read = mfgpt_read, |
| .mask = CLOCKSOURCE_MASK(32), |
| .mult = 0, |
| .shift = 22, |
| }; |
| |
| int __init init_mfgpt_clocksource(void) |
| { |
| if (num_possible_cpus() > 1) /* MFGPT does not scale! */ |
| return 0; |
| |
| clocksource_mfgpt.mult = clocksource_hz2mult(MFGPT_TICK_RATE, 22); |
| return clocksource_register(&clocksource_mfgpt); |
| } |
| |
| arch_initcall(init_mfgpt_clocksource); |