| /* |
| * linux/arch/arm/mach-versatile/pci.c |
| * |
| * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved. |
| * You can redistribute and/or modify this software under the terms of version 2 |
| * of the GNU General Public License as published by the Free Software Foundation. |
| * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED |
| * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software. |
| * |
| * ARM Versatile PCI driver. |
| * |
| * 14/04/2005 Initial version, colin.king@philips.com |
| * |
| */ |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/ioport.h> |
| #include <linux/interrupt.h> |
| #include <linux/spinlock.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/irq.h> |
| #include <asm/system.h> |
| #include <asm/mach/pci.h> |
| |
| /* |
| * these spaces are mapped using the following base registers: |
| * |
| * Usage Local Bus Memory Base/Map registers used |
| * |
| * Mem 50000000 - 5FFFFFFF LB_BASE0/LB_MAP0, non prefetch |
| * Mem 60000000 - 6FFFFFFF LB_BASE1/LB_MAP1, prefetch |
| * IO 44000000 - 4FFFFFFF LB_BASE2/LB_MAP2, IO |
| * Cfg 42000000 - 42FFFFFF PCI config |
| * |
| */ |
| #define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n)) |
| #define SYS_PCICTL __IO_ADDRESS(VERSATILE_SYS_PCICTL) |
| #define PCI_IMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0) |
| #define PCI_IMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4) |
| #define PCI_IMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8) |
| #define PCI_SMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10) |
| #define PCI_SMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14) |
| #define PCI_SMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18) |
| #define PCI_SELFID __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc) |
| |
| #define DEVICE_ID_OFFSET 0x00 |
| #define CSR_OFFSET 0x04 |
| #define CLASS_ID_OFFSET 0x08 |
| |
| #define VP_PCI_DEVICE_ID 0x030010ee |
| #define VP_PCI_CLASS_ID 0x0b400000 |
| |
| static unsigned long pci_slot_ignore = 0; |
| |
| static int __init versatile_pci_slot_ignore(char *str) |
| { |
| int retval; |
| int slot; |
| |
| while ((retval = get_option(&str,&slot))) { |
| if ((slot < 0) || (slot > 31)) { |
| printk("Illegal slot value: %d\n",slot); |
| } else { |
| pci_slot_ignore |= (1 << slot); |
| } |
| } |
| return 1; |
| } |
| |
| __setup("pci_slot_ignore=", versatile_pci_slot_ignore); |
| |
| |
| static void __iomem *__pci_addr(struct pci_bus *bus, |
| unsigned int devfn, int offset) |
| { |
| unsigned int busnr = bus->number; |
| |
| /* |
| * Trap out illegal values |
| */ |
| if (offset > 255) |
| BUG(); |
| if (busnr > 255) |
| BUG(); |
| if (devfn > 255) |
| BUG(); |
| |
| return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) | |
| (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset); |
| } |
| |
| static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where, |
| int size, u32 *val) |
| { |
| void __iomem *addr = __pci_addr(bus, devfn, where & ~3); |
| u32 v; |
| int slot = PCI_SLOT(devfn); |
| |
| if (pci_slot_ignore & (1 << slot)) { |
| /* Ignore this slot */ |
| switch (size) { |
| case 1: |
| v = 0xff; |
| break; |
| case 2: |
| v = 0xffff; |
| break; |
| default: |
| v = 0xffffffff; |
| } |
| } else { |
| switch (size) { |
| case 1: |
| v = __raw_readl(addr); |
| if (where & 2) v >>= 16; |
| if (where & 1) v >>= 8; |
| v &= 0xff; |
| break; |
| |
| case 2: |
| v = __raw_readl(addr); |
| if (where & 2) v >>= 16; |
| v &= 0xffff; |
| break; |
| |
| default: |
| v = __raw_readl(addr); |
| break; |
| } |
| } |
| |
| *val = v; |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where, |
| int size, u32 val) |
| { |
| void __iomem *addr = __pci_addr(bus, devfn, where); |
| int slot = PCI_SLOT(devfn); |
| |
| if (pci_slot_ignore & (1 << slot)) { |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| switch (size) { |
| case 1: |
| __raw_writeb((u8)val, addr); |
| break; |
| |
| case 2: |
| __raw_writew((u16)val, addr); |
| break; |
| |
| case 4: |
| __raw_writel(val, addr); |
| break; |
| } |
| |
| return PCIBIOS_SUCCESSFUL; |
| } |
| |
| static struct pci_ops pci_versatile_ops = { |
| .read = versatile_read_config, |
| .write = versatile_write_config, |
| }; |
| |
| static struct resource io_mem = { |
| .name = "PCI I/O space", |
| .start = VERSATILE_PCI_MEM_BASE0, |
| .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, |
| .flags = IORESOURCE_IO, |
| }; |
| |
| static struct resource non_mem = { |
| .name = "PCI non-prefetchable", |
| .start = VERSATILE_PCI_MEM_BASE1, |
| .end = VERSATILE_PCI_MEM_BASE1+VERSATILE_PCI_MEM_BASE1_SIZE-1, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct resource pre_mem = { |
| .name = "PCI prefetchable", |
| .start = VERSATILE_PCI_MEM_BASE2, |
| .end = VERSATILE_PCI_MEM_BASE2+VERSATILE_PCI_MEM_BASE2_SIZE-1, |
| .flags = IORESOURCE_MEM | IORESOURCE_PREFETCH, |
| }; |
| |
| static int __init pci_versatile_setup_resources(struct resource **resource) |
| { |
| int ret = 0; |
| |
| ret = request_resource(&iomem_resource, &io_mem); |
| if (ret) { |
| printk(KERN_ERR "PCI: unable to allocate I/O " |
| "memory region (%d)\n", ret); |
| goto out; |
| } |
| ret = request_resource(&iomem_resource, &non_mem); |
| if (ret) { |
| printk(KERN_ERR "PCI: unable to allocate non-prefetchable " |
| "memory region (%d)\n", ret); |
| goto release_io_mem; |
| } |
| ret = request_resource(&iomem_resource, &pre_mem); |
| if (ret) { |
| printk(KERN_ERR "PCI: unable to allocate prefetchable " |
| "memory region (%d)\n", ret); |
| goto release_non_mem; |
| } |
| |
| /* |
| * bus->resource[0] is the IO resource for this bus |
| * bus->resource[1] is the mem resource for this bus |
| * bus->resource[2] is the prefetch mem resource for this bus |
| */ |
| resource[0] = &io_mem; |
| resource[1] = &non_mem; |
| resource[2] = &pre_mem; |
| |
| goto out; |
| |
| release_non_mem: |
| release_resource(&non_mem); |
| release_io_mem: |
| release_resource(&io_mem); |
| out: |
| return ret; |
| } |
| |
| int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) |
| { |
| int ret = 0; |
| int i; |
| int myslot = -1; |
| unsigned long val; |
| void __iomem *local_pci_cfg_base; |
| |
| val = __raw_readl(SYS_PCICTL); |
| if (!(val & 1)) { |
| printk("Not plugged into PCI backplane!\n"); |
| ret = -EIO; |
| goto out; |
| } |
| |
| if (nr == 0) { |
| sys->mem_offset = 0; |
| ret = pci_versatile_setup_resources(sys->resource); |
| if (ret < 0) { |
| printk("pci_versatile_setup: resources... oops?\n"); |
| goto out; |
| } |
| } else { |
| printk("pci_versatile_setup: resources... nr == 0??\n"); |
| goto out; |
| } |
| |
| /* |
| * We need to discover the PCI core first to configure itself |
| * before the main PCI probing is performed |
| */ |
| for (i=0; i<32; i++) |
| if ((__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+DEVICE_ID_OFFSET) == VP_PCI_DEVICE_ID) && |
| (__raw_readl(VERSATILE_PCI_VIRT_BASE+(i<<11)+CLASS_ID_OFFSET) == VP_PCI_CLASS_ID)) { |
| myslot = i; |
| break; |
| } |
| |
| if (myslot == -1) { |
| printk("Cannot find PCI core!\n"); |
| ret = -EIO; |
| goto out; |
| } |
| |
| printk("PCI core found (slot %d)\n",myslot); |
| |
| __raw_writel(myslot, PCI_SELFID); |
| local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11); |
| |
| val = __raw_readl(local_pci_cfg_base + CSR_OFFSET); |
| val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; |
| __raw_writel(val, local_pci_cfg_base + CSR_OFFSET); |
| |
| /* |
| * Configure the PCI inbound memory windows to be 1:1 mapped to SDRAM |
| */ |
| __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_0); |
| __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_1); |
| __raw_writel(PHYS_OFFSET, local_pci_cfg_base + PCI_BASE_ADDRESS_2); |
| |
| /* |
| * Do not to map Versatile FPGA PCI device into memory space |
| */ |
| pci_slot_ignore |= (1 << myslot); |
| ret = 1; |
| |
| out: |
| return ret; |
| } |
| |
| |
| struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) |
| { |
| return pci_scan_bus(sys->busnr, &pci_versatile_ops, sys); |
| } |
| |
| void __init pci_versatile_preinit(void) |
| { |
| __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0); |
| __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1); |
| __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2); |
| |
| __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP0); |
| __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP1); |
| __raw_writel(PHYS_OFFSET >> 28, PCI_SMAP2); |
| |
| __raw_writel(1, SYS_PCICTL); |
| } |
| |
| /* |
| * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. |
| */ |
| static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| int irq; |
| int devslot = PCI_SLOT(dev->devfn); |
| |
| /* slot, pin, irq |
| * 24 1 27 |
| * 25 1 28 |
| * 26 1 29 |
| * 27 1 30 |
| */ |
| irq = 27 + ((slot + pin - 1) & 3); |
| |
| printk("PCI map irq: slot %d, pin %d, devslot %d, irq: %d\n",slot,pin,devslot,irq); |
| |
| return irq; |
| } |
| |
| static struct hw_pci versatile_pci __initdata = { |
| .swizzle = NULL, |
| .map_irq = versatile_map_irq, |
| .nr_controllers = 1, |
| .setup = pci_versatile_setup, |
| .scan = pci_versatile_scan_bus, |
| .preinit = pci_versatile_preinit, |
| }; |
| |
| static int __init versatile_pci_init(void) |
| { |
| pci_common_init(&versatile_pci); |
| return 0; |
| } |
| |
| subsys_initcall(versatile_pci_init); |