blob: 37e9c8ca498333e2d2d5c2d4ae6c841bb796a471 [file] [log] [blame]
/*
* Copyright (C) 2015 Linaro, Ltd.
* Rob Herring <robh@kernel.org>
*
* Based on vendor driver:
* Copyright (C) 2013 Marvell Inc.
* Author: Chao Xie <xiechao.mail@gmail.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
/* USB PXA1928 PHY mapping */
#define PHY_28NM_PLL_REG0 0x0
#define PHY_28NM_PLL_REG1 0x4
#define PHY_28NM_CAL_REG 0x8
#define PHY_28NM_TX_REG0 0x0c
#define PHY_28NM_TX_REG1 0x10
#define PHY_28NM_RX_REG0 0x14
#define PHY_28NM_RX_REG1 0x18
#define PHY_28NM_DIG_REG0 0x1c
#define PHY_28NM_DIG_REG1 0x20
#define PHY_28NM_TEST_REG0 0x24
#define PHY_28NM_TEST_REG1 0x28
#define PHY_28NM_MOC_REG 0x2c
#define PHY_28NM_PHY_RESERVE 0x30
#define PHY_28NM_OTG_REG 0x34
#define PHY_28NM_CHRG_DET 0x38
#define PHY_28NM_CTRL_REG0 0xc4
#define PHY_28NM_CTRL_REG1 0xc8
#define PHY_28NM_CTRL_REG2 0xd4
#define PHY_28NM_CTRL_REG3 0xdc
/* PHY_28NM_PLL_REG0 */
#define PHY_28NM_PLL_READY BIT(31)
#define PHY_28NM_PLL_SELLPFR_SHIFT 28
#define PHY_28NM_PLL_SELLPFR_MASK (0x3 << 28)
#define PHY_28NM_PLL_FBDIV_SHIFT 16
#define PHY_28NM_PLL_FBDIV_MASK (0x1ff << 16)
#define PHY_28NM_PLL_ICP_SHIFT 8
#define PHY_28NM_PLL_ICP_MASK (0x7 << 8)
#define PHY_28NM_PLL_REFDIV_SHIFT 0
#define PHY_28NM_PLL_REFDIV_MASK 0x7f
/* PHY_28NM_PLL_REG1 */
#define PHY_28NM_PLL_PU_BY_REG BIT(1)
#define PHY_28NM_PLL_PU_PLL BIT(0)
/* PHY_28NM_CAL_REG */
#define PHY_28NM_PLL_PLLCAL_DONE BIT(31)
#define PHY_28NM_PLL_IMPCAL_DONE BIT(23)
#define PHY_28NM_PLL_KVCO_SHIFT 16
#define PHY_28NM_PLL_KVCO_MASK (0x7 << 16)
#define PHY_28NM_PLL_CAL12_SHIFT 20
#define PHY_28NM_PLL_CAL12_MASK (0x3 << 20)
#define PHY_28NM_IMPCAL_VTH_SHIFT 8
#define PHY_28NM_IMPCAL_VTH_MASK (0x7 << 8)
#define PHY_28NM_PLLCAL_START_SHIFT 22
#define PHY_28NM_IMPCAL_START_SHIFT 13
/* PHY_28NM_TX_REG0 */
#define PHY_28NM_TX_PU_BY_REG BIT(25)
#define PHY_28NM_TX_PU_ANA BIT(24)
#define PHY_28NM_TX_AMP_SHIFT 20
#define PHY_28NM_TX_AMP_MASK (0x7 << 20)
/* PHY_28NM_RX_REG0 */
#define PHY_28NM_RX_SQ_THRESH_SHIFT 0
#define PHY_28NM_RX_SQ_THRESH_MASK (0xf << 0)
/* PHY_28NM_RX_REG1 */
#define PHY_28NM_RX_SQCAL_DONE BIT(31)
/* PHY_28NM_DIG_REG0 */
#define PHY_28NM_DIG_BITSTAFFING_ERR BIT(31)
#define PHY_28NM_DIG_SYNC_ERR BIT(30)
#define PHY_28NM_DIG_SQ_FILT_SHIFT 16
#define PHY_28NM_DIG_SQ_FILT_MASK (0x7 << 16)
#define PHY_28NM_DIG_SQ_BLK_SHIFT 12
#define PHY_28NM_DIG_SQ_BLK_MASK (0x7 << 12)
#define PHY_28NM_DIG_SYNC_NUM_SHIFT 0
#define PHY_28NM_DIG_SYNC_NUM_MASK (0x3 << 0)
#define PHY_28NM_PLL_LOCK_BYPASS BIT(7)
/* PHY_28NM_OTG_REG */
#define PHY_28NM_OTG_CONTROL_BY_PIN BIT(5)
#define PHY_28NM_OTG_PU_OTG BIT(4)
#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DM_SHIFT_28 13
#define PHY_28NM_CHGDTC_ENABLE_SWITCH_DP_SHIFT_28 12
#define PHY_28NM_CHGDTC_VSRC_CHARGE_SHIFT_28 10
#define PHY_28NM_CHGDTC_VDAT_CHARGE_SHIFT_28 8
#define PHY_28NM_CHGDTC_CDP_DM_AUTO_SWITCH_SHIFT_28 7
#define PHY_28NM_CHGDTC_DP_DM_SWAP_SHIFT_28 6
#define PHY_28NM_CHGDTC_PU_CHRG_DTC_SHIFT_28 5
#define PHY_28NM_CHGDTC_PD_EN_SHIFT_28 4
#define PHY_28NM_CHGDTC_DCP_EN_SHIFT_28 3
#define PHY_28NM_CHGDTC_CDP_EN_SHIFT_28 2
#define PHY_28NM_CHGDTC_TESTMON_CHRGDTC_SHIFT_28 0
#define PHY_28NM_CTRL1_CHRG_DTC_OUT_SHIFT_28 4
#define PHY_28NM_CTRL1_VBUSDTC_OUT_SHIFT_28 2
#define PHY_28NM_CTRL3_OVERWRITE BIT(0)
#define PHY_28NM_CTRL3_VBUS_VALID BIT(4)
#define PHY_28NM_CTRL3_AVALID BIT(5)
#define PHY_28NM_CTRL3_BVALID BIT(6)
struct mv_usb2_phy {
struct phy *phy;
struct platform_device *pdev;
void __iomem *base;
struct clk *clk;
};
static bool wait_for_reg(void __iomem *reg, u32 mask, unsigned long timeout)
{
timeout += jiffies;
while (time_is_after_eq_jiffies(timeout)) {
if ((readl(reg) & mask) == mask)
return true;
msleep(1);
}
return false;
}
static int mv_usb2_phy_28nm_init(struct phy *phy)
{
struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
struct platform_device *pdev = mv_phy->pdev;
void __iomem *base = mv_phy->base;
u32 reg;
int ret;
clk_prepare_enable(mv_phy->clk);
/* PHY_28NM_PLL_REG0 */
reg = readl(base + PHY_28NM_PLL_REG0) &
~(PHY_28NM_PLL_SELLPFR_MASK | PHY_28NM_PLL_FBDIV_MASK
| PHY_28NM_PLL_ICP_MASK | PHY_28NM_PLL_REFDIV_MASK);
writel(reg | (0x1 << PHY_28NM_PLL_SELLPFR_SHIFT
| 0xf0 << PHY_28NM_PLL_FBDIV_SHIFT
| 0x3 << PHY_28NM_PLL_ICP_SHIFT
| 0xd << PHY_28NM_PLL_REFDIV_SHIFT),
base + PHY_28NM_PLL_REG0);
/* PHY_28NM_PLL_REG1 */
reg = readl(base + PHY_28NM_PLL_REG1);
writel(reg | PHY_28NM_PLL_PU_PLL | PHY_28NM_PLL_PU_BY_REG,
base + PHY_28NM_PLL_REG1);
/* PHY_28NM_TX_REG0 */
reg = readl(base + PHY_28NM_TX_REG0) & ~PHY_28NM_TX_AMP_MASK;
writel(reg | PHY_28NM_TX_PU_BY_REG | 0x3 << PHY_28NM_TX_AMP_SHIFT |
PHY_28NM_TX_PU_ANA,
base + PHY_28NM_TX_REG0);
/* PHY_28NM_RX_REG0 */
reg = readl(base + PHY_28NM_RX_REG0) & ~PHY_28NM_RX_SQ_THRESH_MASK;
writel(reg | 0xa << PHY_28NM_RX_SQ_THRESH_SHIFT,
base + PHY_28NM_RX_REG0);
/* PHY_28NM_DIG_REG0 */
reg = readl(base + PHY_28NM_DIG_REG0) &
~(PHY_28NM_DIG_BITSTAFFING_ERR | PHY_28NM_DIG_SYNC_ERR |
PHY_28NM_DIG_SQ_FILT_MASK | PHY_28NM_DIG_SQ_BLK_MASK |
PHY_28NM_DIG_SYNC_NUM_MASK);
writel(reg | (0x1 << PHY_28NM_DIG_SYNC_NUM_SHIFT |
PHY_28NM_PLL_LOCK_BYPASS),
base + PHY_28NM_DIG_REG0);
/* PHY_28NM_OTG_REG */
reg = readl(base + PHY_28NM_OTG_REG) | PHY_28NM_OTG_PU_OTG;
writel(reg & ~PHY_28NM_OTG_CONTROL_BY_PIN, base + PHY_28NM_OTG_REG);
/*
* Calibration Timing
* ____________________________
* CAL START ___|
* ____________________
* CAL_DONE ___________|
* | 400us |
*/
/* Make sure PHY Calibration is ready */
if (!wait_for_reg(base + PHY_28NM_CAL_REG,
PHY_28NM_PLL_PLLCAL_DONE | PHY_28NM_PLL_IMPCAL_DONE,
HZ / 10)) {
dev_warn(&pdev->dev, "USB PHY PLL calibrate not done after 100mS.");
ret = -ETIMEDOUT;
goto err_clk;
}
if (!wait_for_reg(base + PHY_28NM_RX_REG1,
PHY_28NM_RX_SQCAL_DONE, HZ / 10)) {
dev_warn(&pdev->dev, "USB PHY RX SQ calibrate not done after 100mS.");
ret = -ETIMEDOUT;
goto err_clk;
}
/* Make sure PHY PLL is ready */
if (!wait_for_reg(base + PHY_28NM_PLL_REG0,
PHY_28NM_PLL_READY, HZ / 10)) {
dev_warn(&pdev->dev, "PLL_READY not set after 100mS.");
ret = -ETIMEDOUT;
goto err_clk;
}
return 0;
err_clk:
clk_disable_unprepare(mv_phy->clk);
return ret;
}
static int mv_usb2_phy_28nm_power_on(struct phy *phy)
{
struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
void __iomem *base = mv_phy->base;
writel(readl(base + PHY_28NM_CTRL_REG3) |
(PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID |
PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID),
base + PHY_28NM_CTRL_REG3);
return 0;
}
static int mv_usb2_phy_28nm_power_off(struct phy *phy)
{
struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
void __iomem *base = mv_phy->base;
writel(readl(base + PHY_28NM_CTRL_REG3) |
~(PHY_28NM_CTRL3_OVERWRITE | PHY_28NM_CTRL3_VBUS_VALID
| PHY_28NM_CTRL3_AVALID | PHY_28NM_CTRL3_BVALID),
base + PHY_28NM_CTRL_REG3);
return 0;
}
static int mv_usb2_phy_28nm_exit(struct phy *phy)
{
struct mv_usb2_phy *mv_phy = phy_get_drvdata(phy);
void __iomem *base = mv_phy->base;
unsigned int val;
val = readw(base + PHY_28NM_PLL_REG1);
val &= ~PHY_28NM_PLL_PU_PLL;
writew(val, base + PHY_28NM_PLL_REG1);
/* power down PHY Analog part */
val = readw(base + PHY_28NM_TX_REG0);
val &= ~PHY_28NM_TX_PU_ANA;
writew(val, base + PHY_28NM_TX_REG0);
/* power down PHY OTG part */
val = readw(base + PHY_28NM_OTG_REG);
val &= ~PHY_28NM_OTG_PU_OTG;
writew(val, base + PHY_28NM_OTG_REG);
clk_disable_unprepare(mv_phy->clk);
return 0;
}
static const struct phy_ops usb_ops = {
.init = mv_usb2_phy_28nm_init,
.power_on = mv_usb2_phy_28nm_power_on,
.power_off = mv_usb2_phy_28nm_power_off,
.exit = mv_usb2_phy_28nm_exit,
.owner = THIS_MODULE,
};
static int mv_usb2_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct mv_usb2_phy *mv_phy;
struct resource *r;
mv_phy = devm_kzalloc(&pdev->dev, sizeof(*mv_phy), GFP_KERNEL);
if (!mv_phy)
return -ENOMEM;
mv_phy->pdev = pdev;
mv_phy->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(mv_phy->clk)) {
dev_err(&pdev->dev, "failed to get clock.\n");
return PTR_ERR(mv_phy->clk);
}
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
mv_phy->base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(mv_phy->base))
return PTR_ERR(mv_phy->base);
mv_phy->phy = devm_phy_create(&pdev->dev, pdev->dev.of_node, &usb_ops);
if (IS_ERR(mv_phy->phy))
return PTR_ERR(mv_phy->phy);
phy_set_drvdata(mv_phy->phy, mv_phy);
phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id mv_usbphy_dt_match[] = {
{ .compatible = "marvell,pxa1928-usb-phy", },
{},
};
MODULE_DEVICE_TABLE(of, mv_usbphy_dt_match);
static struct platform_driver mv_usb2_phy_driver = {
.probe = mv_usb2_phy_probe,
.driver = {
.name = "mv-usb2-phy",
.of_match_table = of_match_ptr(mv_usbphy_dt_match),
},
};
module_platform_driver(mv_usb2_phy_driver);
MODULE_AUTHOR("Rob Herring <robh@kernel.org>");
MODULE_DESCRIPTION("Marvell USB2 phy driver");
MODULE_LICENSE("GPL v2");