blob: cd9dba8205668d98665d938b13a5e254b74bdb17 [file] [log] [blame]
/*
* Broadcom SATA3 AHCI Controller PHY Driver
*
* Copyright © 2009-2015 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/device.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#define SATA_MDIO_BANK_OFFSET 0x23c
#define SATA_MDIO_REG_OFFSET(ofs) ((ofs) * 4)
#define SATA_MDIO_REG_SPACE_SIZE 0x1000
#define SATA_MDIO_REG_LENGTH 0x1f00
#define MAX_PORTS 2
/* Register offset between PHYs in PCB space */
#define SATA_MDIO_REG_SPACE_SIZE 0x1000
struct brcm_sata_port {
int portnum;
struct phy *phy;
struct brcm_sata_phy *phy_priv;
bool ssc_en;
};
struct brcm_sata_phy {
struct device *dev;
void __iomem *phy_base;
struct brcm_sata_port phys[MAX_PORTS];
};
enum sata_mdio_phy_regs_28nm {
PLL_REG_BANK_0 = 0x50,
PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
TXPMD_REG_BANK = 0x1a0,
TXPMD_CONTROL1 = 0x81,
TXPMD_CONTROL1_TX_SSC_EN_FRC = BIT(0),
TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL = BIT(1),
TXPMD_TX_FREQ_CTRL_CONTROL1 = 0x82,
TXPMD_TX_FREQ_CTRL_CONTROL2 = 0x83,
TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK = 0x3ff,
TXPMD_TX_FREQ_CTRL_CONTROL3 = 0x84,
TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK = 0x3ff,
};
static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
{
struct brcm_sata_phy *priv = port->phy_priv;
return priv->phy_base + (port->portnum * SATA_MDIO_REG_SPACE_SIZE);
}
static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
u32 msk, u32 value)
{
u32 tmp;
writel(bank, addr + SATA_MDIO_BANK_OFFSET);
tmp = readl(addr + SATA_MDIO_REG_OFFSET(ofs));
tmp = (tmp & msk) | value;
writel(tmp, addr + SATA_MDIO_REG_OFFSET(ofs));
}
/* These defaults were characterized by H/W group */
#define FMIN_VAL_DEFAULT 0x3df
#define FMAX_VAL_DEFAULT 0x3df
#define FMAX_VAL_SSC 0x83
static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
{
void __iomem *base = brcm_sata_phy_base(port);
struct brcm_sata_phy *priv = port->phy_priv;
u32 tmp;
/* override the TX spread spectrum setting */
tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
/* set fixed min freq */
brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
FMIN_VAL_DEFAULT);
/* set fixed max freq depending on SSC config */
if (port->ssc_en) {
dev_info(priv->dev, "enabling SSC on port %d\n", port->portnum);
tmp = FMAX_VAL_SSC;
} else {
tmp = FMAX_VAL_DEFAULT;
}
brcm_sata_mdio_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
}
static int brcm_sata_phy_init(struct phy *phy)
{
struct brcm_sata_port *port = phy_get_drvdata(phy);
brcm_sata_cfg_ssc_28nm(port);
return 0;
}
static const struct phy_ops phy_ops_28nm = {
.init = brcm_sata_phy_init,
.owner = THIS_MODULE,
};
static const struct of_device_id brcm_sata_phy_of_match[] = {
{ .compatible = "brcm,bcm7445-sata-phy" },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
static int brcm_sata_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *dn = dev->of_node, *child;
struct brcm_sata_phy *priv;
struct resource *res;
struct phy_provider *provider;
int ret, count = 0;
if (of_get_child_count(dn) == 0)
return -ENODEV;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
dev_set_drvdata(dev, priv);
priv->dev = dev;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy");
priv->phy_base = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->phy_base))
return PTR_ERR(priv->phy_base);
for_each_available_child_of_node(dn, child) {
unsigned int id;
struct brcm_sata_port *port;
if (of_property_read_u32(child, "reg", &id)) {
dev_err(dev, "missing reg property in node %s\n",
child->name);
ret = -EINVAL;
goto put_child;
}
if (id >= MAX_PORTS) {
dev_err(dev, "invalid reg: %u\n", id);
ret = -EINVAL;
goto put_child;
}
if (priv->phys[id].phy) {
dev_err(dev, "already registered port %u\n", id);
ret = -EINVAL;
goto put_child;
}
port = &priv->phys[id];
port->portnum = id;
port->phy_priv = priv;
port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
if (IS_ERR(port->phy)) {
dev_err(dev, "failed to create PHY\n");
ret = PTR_ERR(port->phy);
goto put_child;
}
phy_set_drvdata(port->phy, port);
count++;
}
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(provider)) {
dev_err(dev, "could not register PHY provider\n");
return PTR_ERR(provider);
}
dev_info(dev, "registered %d port(s)\n", count);
return 0;
put_child:
of_node_put(child);
return ret;
}
static struct platform_driver brcm_sata_phy_driver = {
.probe = brcm_sata_phy_probe,
.driver = {
.of_match_table = brcm_sata_phy_of_match,
.name = "brcmstb-sata-phy",
}
};
module_platform_driver(brcm_sata_phy_driver);
MODULE_DESCRIPTION("Broadcom STB SATA PHY driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Marc Carino");
MODULE_AUTHOR("Brian Norris");
MODULE_ALIAS("platform:phy-brcmstb-sata");