blob: 50a109503a3fefbe41b1c153b8c96f975a4a6d1f [file] [log] [blame]
/*
* skl-message.c - HDA DSP interface for FW registration, Pipe and Module
* configurations
*
* Copyright (C) 2015 Intel Corp
* Author:Rafal Redzimski <rafal.f.redzimski@intel.com>
* Jeeja KP <jeeja.kp@intel.com>
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <linux/slab.h>
#include <linux/pci.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include "skl-sst-dsp.h"
#include "skl-sst-ipc.h"
#include "skl.h"
#include "../common/sst-dsp.h"
#include "../common/sst-dsp-priv.h"
#include "skl-topology.h"
#include "skl-tplg-interface.h"
static int skl_alloc_dma_buf(struct device *dev,
struct snd_dma_buffer *dmab, size_t size)
{
struct hdac_ext_bus *ebus = dev_get_drvdata(dev);
struct hdac_bus *bus = ebus_to_hbus(ebus);
if (!bus)
return -ENODEV;
return bus->io_ops->dma_alloc_pages(bus, SNDRV_DMA_TYPE_DEV, size, dmab);
}
static int skl_free_dma_buf(struct device *dev, struct snd_dma_buffer *dmab)
{
struct hdac_ext_bus *ebus = dev_get_drvdata(dev);
struct hdac_bus *bus = ebus_to_hbus(ebus);
if (!bus)
return -ENODEV;
bus->io_ops->dma_free_pages(bus, dmab);
return 0;
}
#define NOTIFICATION_PARAM_ID 3
#define NOTIFICATION_MASK 0xf
/* disable notfication for underruns/overruns from firmware module */
static void skl_dsp_enable_notification(struct skl_sst *ctx, bool enable)
{
struct notification_mask mask;
struct skl_ipc_large_config_msg msg = {0};
mask.notify = NOTIFICATION_MASK;
mask.enable = enable;
msg.large_param_id = NOTIFICATION_PARAM_ID;
msg.param_data_size = sizeof(mask);
skl_ipc_set_large_config(&ctx->ipc, &msg, (u32 *)&mask);
}
int skl_init_dsp(struct skl *skl)
{
void __iomem *mmio_base;
struct hdac_ext_bus *ebus = &skl->ebus;
struct hdac_bus *bus = ebus_to_hbus(ebus);
int irq = bus->irq;
struct skl_dsp_loader_ops loader_ops;
int ret;
loader_ops.alloc_dma_buf = skl_alloc_dma_buf;
loader_ops.free_dma_buf = skl_free_dma_buf;
/* enable ppcap interrupt */
snd_hdac_ext_bus_ppcap_enable(&skl->ebus, true);
snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, true);
/* read the BAR of the ADSP MMIO */
mmio_base = pci_ioremap_bar(skl->pci, 4);
if (mmio_base == NULL) {
dev_err(bus->dev, "ioremap error\n");
return -ENXIO;
}
ret = skl_sst_dsp_init(bus->dev, mmio_base, irq,
loader_ops, &skl->skl_sst);
if (ret < 0)
return ret;
skl_dsp_enable_notification(skl->skl_sst, false);
dev_dbg(bus->dev, "dsp registration status=%d\n", ret);
return ret;
}
void skl_free_dsp(struct skl *skl)
{
struct hdac_ext_bus *ebus = &skl->ebus;
struct hdac_bus *bus = ebus_to_hbus(ebus);
struct skl_sst *ctx = skl->skl_sst;
/* disable ppcap interrupt */
snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, false);
skl_sst_dsp_cleanup(bus->dev, ctx);
if (ctx->dsp->addr.lpe)
iounmap(ctx->dsp->addr.lpe);
}
int skl_suspend_dsp(struct skl *skl)
{
struct skl_sst *ctx = skl->skl_sst;
int ret;
/* if ppcap is not supported return 0 */
if (!skl->ebus.ppcap)
return 0;
ret = skl_dsp_sleep(ctx->dsp);
if (ret < 0)
return ret;
/* disable ppcap interrupt */
snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, false);
snd_hdac_ext_bus_ppcap_enable(&skl->ebus, false);
return 0;
}
int skl_resume_dsp(struct skl *skl)
{
struct skl_sst *ctx = skl->skl_sst;
int ret;
/* if ppcap is not supported return 0 */
if (!skl->ebus.ppcap)
return 0;
/* enable ppcap interrupt */
snd_hdac_ext_bus_ppcap_enable(&skl->ebus, true);
snd_hdac_ext_bus_ppcap_int_enable(&skl->ebus, true);
ret = skl_dsp_wake(ctx->dsp);
if (ret < 0)
return ret;
skl_dsp_enable_notification(skl->skl_sst, false);
return ret;
}
enum skl_bitdepth skl_get_bit_depth(int params)
{
switch (params) {
case 8:
return SKL_DEPTH_8BIT;
case 16:
return SKL_DEPTH_16BIT;
case 24:
return SKL_DEPTH_24BIT;
case 32:
return SKL_DEPTH_32BIT;
default:
return SKL_DEPTH_INVALID;
}
}
static u32 skl_create_channel_map(enum skl_ch_cfg ch_cfg)
{
u32 config;
switch (ch_cfg) {
case SKL_CH_CFG_MONO:
config = (0xFFFFFFF0 | SKL_CHANNEL_LEFT);
break;
case SKL_CH_CFG_STEREO:
config = (0xFFFFFF00 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_RIGHT << 4));
break;
case SKL_CH_CFG_2_1:
config = (0xFFFFF000 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_RIGHT << 4)
| (SKL_CHANNEL_LFE << 8));
break;
case SKL_CH_CFG_3_0:
config = (0xFFFFF000 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_CENTER << 4)
| (SKL_CHANNEL_RIGHT << 8));
break;
case SKL_CH_CFG_3_1:
config = (0xFFFF0000 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_CENTER << 4)
| (SKL_CHANNEL_RIGHT << 8)
| (SKL_CHANNEL_LFE << 12));
break;
case SKL_CH_CFG_QUATRO:
config = (0xFFFF0000 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_RIGHT << 4)
| (SKL_CHANNEL_LEFT_SURROUND << 8)
| (SKL_CHANNEL_RIGHT_SURROUND << 12));
break;
case SKL_CH_CFG_4_0:
config = (0xFFFF0000 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_CENTER << 4)
| (SKL_CHANNEL_RIGHT << 8)
| (SKL_CHANNEL_CENTER_SURROUND << 12));
break;
case SKL_CH_CFG_5_0:
config = (0xFFF00000 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_CENTER << 4)
| (SKL_CHANNEL_RIGHT << 8)
| (SKL_CHANNEL_LEFT_SURROUND << 12)
| (SKL_CHANNEL_RIGHT_SURROUND << 16));
break;
case SKL_CH_CFG_5_1:
config = (0xFF000000 | SKL_CHANNEL_CENTER
| (SKL_CHANNEL_LEFT << 4)
| (SKL_CHANNEL_RIGHT << 8)
| (SKL_CHANNEL_LEFT_SURROUND << 12)
| (SKL_CHANNEL_RIGHT_SURROUND << 16)
| (SKL_CHANNEL_LFE << 20));
break;
case SKL_CH_CFG_DUAL_MONO:
config = (0xFFFFFF00 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_LEFT << 4));
break;
case SKL_CH_CFG_I2S_DUAL_STEREO_0:
config = (0xFFFFFF00 | SKL_CHANNEL_LEFT
| (SKL_CHANNEL_RIGHT << 4));
break;
case SKL_CH_CFG_I2S_DUAL_STEREO_1:
config = (0xFFFF00FF | (SKL_CHANNEL_LEFT << 8)
| (SKL_CHANNEL_RIGHT << 12));
break;
default:
config = 0xFFFFFFFF;
break;
}
return config;
}
/*
* Each module in DSP expects a base module configuration, which consists of
* PCM format information, which we calculate in driver and resource values
* which are read from widget information passed through topology binary
* This is send when we create a module with INIT_INSTANCE IPC msg
*/
static void skl_set_base_module_format(struct skl_sst *ctx,
struct skl_module_cfg *mconfig,
struct skl_base_cfg *base_cfg)
{
struct skl_module_fmt *format = &mconfig->in_fmt;
base_cfg->audio_fmt.number_of_channels = (u8)format->channels;
base_cfg->audio_fmt.s_freq = format->s_freq;
base_cfg->audio_fmt.bit_depth = format->bit_depth;
base_cfg->audio_fmt.valid_bit_depth = format->valid_bit_depth;
base_cfg->audio_fmt.ch_cfg = format->ch_cfg;
dev_dbg(ctx->dev, "bit_depth=%x valid_bd=%x ch_config=%x\n",
format->bit_depth, format->valid_bit_depth,
format->ch_cfg);
base_cfg->audio_fmt.channel_map = skl_create_channel_map(
base_cfg->audio_fmt.ch_cfg);
base_cfg->audio_fmt.interleaving = SKL_INTERLEAVING_PER_CHANNEL;
base_cfg->cps = mconfig->mcps;
base_cfg->ibs = mconfig->ibs;
base_cfg->obs = mconfig->obs;
}
/*
* Copies copier capabilities into copier module and updates copier module
* config size.
*/
static void skl_copy_copier_caps(struct skl_module_cfg *mconfig,
struct skl_cpr_cfg *cpr_mconfig)
{
if (mconfig->formats_config.caps_size == 0)
return;
memcpy(cpr_mconfig->gtw_cfg.config_data,
mconfig->formats_config.caps,
mconfig->formats_config.caps_size);
cpr_mconfig->gtw_cfg.config_length =
(mconfig->formats_config.caps_size) / 4;
}
#define SKL_NON_GATEWAY_CPR_NODE_ID 0xFFFFFFFF
/*
* Calculate the gatewat settings required for copier module, type of
* gateway and index of gateway to use
*/
static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx,
struct skl_module_cfg *mconfig,
struct skl_cpr_cfg *cpr_mconfig)
{
union skl_connector_node_id node_id = {0};
union skl_ssp_dma_node ssp_node = {0};
struct skl_pipe_params *params = mconfig->pipe->p_params;
switch (mconfig->dev_type) {
case SKL_DEVICE_BT:
node_id.node.dma_type =
(SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
SKL_DMA_I2S_LINK_OUTPUT_CLASS :
SKL_DMA_I2S_LINK_INPUT_CLASS;
node_id.node.vindex = params->host_dma_id +
(mconfig->vbus_id << 3);
break;
case SKL_DEVICE_I2S:
node_id.node.dma_type =
(SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
SKL_DMA_I2S_LINK_OUTPUT_CLASS :
SKL_DMA_I2S_LINK_INPUT_CLASS;
ssp_node.dma_node.time_slot_index = mconfig->time_slot;
ssp_node.dma_node.i2s_instance = mconfig->vbus_id;
node_id.node.vindex = ssp_node.val;
break;
case SKL_DEVICE_DMIC:
node_id.node.dma_type = SKL_DMA_DMIC_LINK_INPUT_CLASS;
node_id.node.vindex = mconfig->vbus_id +
(mconfig->time_slot);
break;
case SKL_DEVICE_HDALINK:
node_id.node.dma_type =
(SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
SKL_DMA_HDA_LINK_OUTPUT_CLASS :
SKL_DMA_HDA_LINK_INPUT_CLASS;
node_id.node.vindex = params->link_dma_id;
break;
case SKL_DEVICE_HDAHOST:
node_id.node.dma_type =
(SKL_CONN_SOURCE == mconfig->hw_conn_type) ?
SKL_DMA_HDA_HOST_OUTPUT_CLASS :
SKL_DMA_HDA_HOST_INPUT_CLASS;
node_id.node.vindex = params->host_dma_id;
break;
default:
cpr_mconfig->gtw_cfg.node_id = SKL_NON_GATEWAY_CPR_NODE_ID;
cpr_mconfig->cpr_feature_mask = 0;
return;
}
cpr_mconfig->gtw_cfg.node_id = node_id.val;
if (SKL_CONN_SOURCE == mconfig->hw_conn_type)
cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->obs;
else
cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->ibs;
cpr_mconfig->cpr_feature_mask = 0;
cpr_mconfig->gtw_cfg.config_length = 0;
skl_copy_copier_caps(mconfig, cpr_mconfig);
}
static void skl_setup_out_format(struct skl_sst *ctx,
struct skl_module_cfg *mconfig,
struct skl_audio_data_format *out_fmt)
{
struct skl_module_fmt *format = &mconfig->out_fmt;
out_fmt->number_of_channels = (u8)format->channels;
out_fmt->s_freq = format->s_freq;
out_fmt->bit_depth = format->bit_depth;
out_fmt->valid_bit_depth = format->valid_bit_depth;
out_fmt->ch_cfg = format->ch_cfg;
out_fmt->channel_map = skl_create_channel_map(out_fmt->ch_cfg);
out_fmt->interleaving = SKL_INTERLEAVING_PER_CHANNEL;
dev_dbg(ctx->dev, "copier out format chan=%d fre=%d bitdepth=%d\n",
out_fmt->number_of_channels, format->s_freq, format->bit_depth);
}
/*
* DSP needs SRC module for frequency conversion, SRC takes base module
* configuration and the target frequency as extra parameter passed as src
* config
*/
static void skl_set_src_format(struct skl_sst *ctx,
struct skl_module_cfg *mconfig,
struct skl_src_module_cfg *src_mconfig)
{
struct skl_module_fmt *fmt = &mconfig->out_fmt;
skl_set_base_module_format(ctx, mconfig,
(struct skl_base_cfg *)src_mconfig);
src_mconfig->src_cfg = fmt->s_freq;
}
/*
* DSP needs updown module to do channel conversion. updown module take base
* module configuration and channel configuration
* It also take coefficients and now we have defaults applied here
*/
static void skl_set_updown_mixer_format(struct skl_sst *ctx,
struct skl_module_cfg *mconfig,
struct skl_up_down_mixer_cfg *mixer_mconfig)
{
struct skl_module_fmt *fmt = &mconfig->out_fmt;
int i = 0;
skl_set_base_module_format(ctx, mconfig,
(struct skl_base_cfg *)mixer_mconfig);
mixer_mconfig->out_ch_cfg = fmt->ch_cfg;
/* Select F/W default coefficient */
mixer_mconfig->coeff_sel = 0x0;
/* User coeff, don't care since we are selecting F/W defaults */
for (i = 0; i < UP_DOWN_MIXER_MAX_COEFF; i++)
mixer_mconfig->coeff[i] = 0xDEADBEEF;
}
/*
* 'copier' is DSP internal module which copies data from Host DMA (HDA host
* dma) or link (hda link, SSP, PDM)
* Here we calculate the copier module parameters, like PCM format, output
* format, gateway settings
* copier_module_config is sent as input buffer with INIT_INSTANCE IPC msg
*/
static void skl_set_copier_format(struct skl_sst *ctx,
struct skl_module_cfg *mconfig,
struct skl_cpr_cfg *cpr_mconfig)
{
struct skl_audio_data_format *out_fmt = &cpr_mconfig->out_fmt;
struct skl_base_cfg *base_cfg = (struct skl_base_cfg *)cpr_mconfig;
skl_set_base_module_format(ctx, mconfig, base_cfg);
skl_setup_out_format(ctx, mconfig, out_fmt);
skl_setup_cpr_gateway_cfg(ctx, mconfig, cpr_mconfig);
}
static u16 skl_get_module_param_size(struct skl_sst *ctx,
struct skl_module_cfg *mconfig)
{
u16 param_size;
switch (mconfig->m_type) {
case SKL_MODULE_TYPE_COPIER:
param_size = sizeof(struct skl_cpr_cfg);
param_size += mconfig->formats_config.caps_size;
return param_size;
case SKL_MODULE_TYPE_SRCINT:
return sizeof(struct skl_src_module_cfg);
case SKL_MODULE_TYPE_UPDWMIX:
return sizeof(struct skl_up_down_mixer_cfg);
default:
/*
* return only base cfg when no specific module type is
* specified
*/
return sizeof(struct skl_base_cfg);
}
return 0;
}
/*
* DSP firmware supports various modules like copier, SRC, updown etc.
* These modules required various parameters to be calculated and sent for
* the module initialization to DSP. By default a generic module needs only
* base module format configuration
*/
static int skl_set_module_format(struct skl_sst *ctx,
struct skl_module_cfg *module_config,
u16 *module_config_size,
void **param_data)
{
u16 param_size;
param_size = skl_get_module_param_size(ctx, module_config);
*param_data = kzalloc(param_size, GFP_KERNEL);
if (NULL == *param_data)
return -ENOMEM;
*module_config_size = param_size;
switch (module_config->m_type) {
case SKL_MODULE_TYPE_COPIER:
skl_set_copier_format(ctx, module_config, *param_data);
break;
case SKL_MODULE_TYPE_SRCINT:
skl_set_src_format(ctx, module_config, *param_data);
break;
case SKL_MODULE_TYPE_UPDWMIX:
skl_set_updown_mixer_format(ctx, module_config, *param_data);
break;
default:
skl_set_base_module_format(ctx, module_config, *param_data);
break;
}
dev_dbg(ctx->dev, "Module type=%d config size: %d bytes\n",
module_config->id.module_id, param_size);
print_hex_dump(KERN_DEBUG, "Module params:", DUMP_PREFIX_OFFSET, 8, 4,
*param_data, param_size, false);
return 0;
}
static int skl_get_queue_index(struct skl_module_pin *mpin,
struct skl_module_inst_id id, int max)
{
int i;
for (i = 0; i < max; i++) {
if (mpin[i].id.module_id == id.module_id &&
mpin[i].id.instance_id == id.instance_id)
return i;
}
return -EINVAL;
}
/*
* Allocates queue for each module.
* if dynamic, the pin_index is allocated 0 to max_pin.
* In static, the pin_index is fixed based on module_id and instance id
*/
static int skl_alloc_queue(struct skl_module_pin *mpin,
struct skl_module_inst_id id, int max)
{
int i;
/*
* if pin in dynamic, find first free pin
* otherwise find match module and instance id pin as topology will
* ensure a unique pin is assigned to this so no need to
* allocate/free
*/
for (i = 0; i < max; i++) {
if (mpin[i].is_dynamic) {
if (!mpin[i].in_use) {
mpin[i].in_use = true;
mpin[i].id.module_id = id.module_id;
mpin[i].id.instance_id = id.instance_id;
return i;
}
} else {
if (mpin[i].id.module_id == id.module_id &&
mpin[i].id.instance_id == id.instance_id)
return i;
}
}
return -EINVAL;
}
static void skl_free_queue(struct skl_module_pin *mpin, int q_index)
{
if (mpin[q_index].is_dynamic) {
mpin[q_index].in_use = false;
mpin[q_index].id.module_id = 0;
mpin[q_index].id.instance_id = 0;
}
}
/*
* A module needs to be instanataited in DSP. A mdoule is present in a
* collection of module referred as a PIPE.
* We first calculate the module format, based on module type and then
* invoke the DSP by sending IPC INIT_INSTANCE using ipc helper
*/
int skl_init_module(struct skl_sst *ctx,
struct skl_module_cfg *mconfig, char *param)
{
u16 module_config_size = 0;
void *param_data = NULL;
int ret;
struct skl_ipc_init_instance_msg msg;
dev_dbg(ctx->dev, "%s: module_id = %d instance=%d\n", __func__,
mconfig->id.module_id, mconfig->id.instance_id);
if (mconfig->pipe->state != SKL_PIPE_CREATED) {
dev_err(ctx->dev, "Pipe not created state= %d pipe_id= %d\n",
mconfig->pipe->state, mconfig->pipe->ppl_id);
return -EIO;
}
ret = skl_set_module_format(ctx, mconfig,
&module_config_size, &param_data);
if (ret < 0) {
dev_err(ctx->dev, "Failed to set module format ret=%d\n", ret);
return ret;
}
msg.module_id = mconfig->id.module_id;
msg.instance_id = mconfig->id.instance_id;
msg.ppl_instance_id = mconfig->pipe->ppl_id;
msg.param_data_size = module_config_size;
msg.core_id = mconfig->core_id;
ret = skl_ipc_init_instance(&ctx->ipc, &msg, param_data);
if (ret < 0) {
dev_err(ctx->dev, "Failed to init instance ret=%d\n", ret);
kfree(param_data);
return ret;
}
mconfig->m_state = SKL_MODULE_INIT_DONE;
return ret;
}
static void skl_dump_bind_info(struct skl_sst *ctx, struct skl_module_cfg
*src_module, struct skl_module_cfg *dst_module)
{
dev_dbg(ctx->dev, "%s: src module_id = %d src_instance=%d\n",
__func__, src_module->id.module_id, src_module->id.instance_id);
dev_dbg(ctx->dev, "%s: dst_module=%d dst_instacne=%d\n", __func__,
dst_module->id.module_id, dst_module->id.instance_id);
dev_dbg(ctx->dev, "src_module state = %d dst module state = %d\n",
src_module->m_state, dst_module->m_state);
}
/*
* On module freeup, we need to unbind the module with modules
* it is already bind.
* Find the pin allocated and unbind then using bind_unbind IPC
*/
int skl_unbind_modules(struct skl_sst *ctx,
struct skl_module_cfg *src_mcfg,
struct skl_module_cfg *dst_mcfg)
{
int ret;
struct skl_ipc_bind_unbind_msg msg;
struct skl_module_inst_id src_id = src_mcfg->id;
struct skl_module_inst_id dst_id = dst_mcfg->id;
int in_max = dst_mcfg->max_in_queue;
int out_max = src_mcfg->max_out_queue;
int src_index, dst_index;
skl_dump_bind_info(ctx, src_mcfg, dst_mcfg);
if (src_mcfg->m_state != SKL_MODULE_BIND_DONE)
return 0;
/*
* if intra module unbind, check if both modules are BIND,
* then send unbind
*/
if ((src_mcfg->pipe->ppl_id != dst_mcfg->pipe->ppl_id) &&
dst_mcfg->m_state != SKL_MODULE_BIND_DONE)
return 0;
else if (src_mcfg->m_state < SKL_MODULE_INIT_DONE &&
dst_mcfg->m_state < SKL_MODULE_INIT_DONE)
return 0;
/* get src queue index */
src_index = skl_get_queue_index(src_mcfg->m_out_pin, dst_id, out_max);
if (src_index < 0)
return -EINVAL;
msg.src_queue = src_mcfg->m_out_pin[src_index].pin_index;
/* get dst queue index */
dst_index = skl_get_queue_index(dst_mcfg->m_in_pin, src_id, in_max);
if (dst_index < 0)
return -EINVAL;
msg.dst_queue = dst_mcfg->m_in_pin[dst_index].pin_index;
msg.module_id = src_mcfg->id.module_id;
msg.instance_id = src_mcfg->id.instance_id;
msg.dst_module_id = dst_mcfg->id.module_id;
msg.dst_instance_id = dst_mcfg->id.instance_id;
msg.bind = false;
ret = skl_ipc_bind_unbind(&ctx->ipc, &msg);
if (!ret) {
src_mcfg->m_state = SKL_MODULE_UNINIT;
/* free queue only if unbind is success */
skl_free_queue(src_mcfg->m_out_pin, src_index);
skl_free_queue(dst_mcfg->m_in_pin, dst_index);
}
return ret;
}
/*
* Once a module is instantiated it need to be 'bind' with other modules in
* the pipeline. For binding we need to find the module pins which are bind
* together
* This function finds the pins and then sends bund_unbind IPC message to
* DSP using IPC helper
*/
int skl_bind_modules(struct skl_sst *ctx,
struct skl_module_cfg *src_mcfg,
struct skl_module_cfg *dst_mcfg)
{
int ret;
struct skl_ipc_bind_unbind_msg msg;
struct skl_module_inst_id src_id = src_mcfg->id;
struct skl_module_inst_id dst_id = dst_mcfg->id;
int in_max = dst_mcfg->max_in_queue;
int out_max = src_mcfg->max_out_queue;
int src_index, dst_index;
skl_dump_bind_info(ctx, src_mcfg, dst_mcfg);
if (src_mcfg->m_state < SKL_MODULE_INIT_DONE &&
dst_mcfg->m_state < SKL_MODULE_INIT_DONE)
return 0;
src_index = skl_alloc_queue(src_mcfg->m_out_pin, dst_id, out_max);
if (src_index < 0)
return -EINVAL;
msg.src_queue = src_mcfg->m_out_pin[src_index].pin_index;
dst_index = skl_alloc_queue(dst_mcfg->m_in_pin, src_id, in_max);
if (dst_index < 0) {
skl_free_queue(src_mcfg->m_out_pin, src_index);
return -EINVAL;
}
msg.dst_queue = dst_mcfg->m_in_pin[dst_index].pin_index;
dev_dbg(ctx->dev, "src queue = %d dst queue =%d\n",
msg.src_queue, msg.dst_queue);
msg.module_id = src_mcfg->id.module_id;
msg.instance_id = src_mcfg->id.instance_id;
msg.dst_module_id = dst_mcfg->id.module_id;
msg.dst_instance_id = dst_mcfg->id.instance_id;
msg.bind = true;
ret = skl_ipc_bind_unbind(&ctx->ipc, &msg);
if (!ret) {
src_mcfg->m_state = SKL_MODULE_BIND_DONE;
} else {
/* error case , if IPC fails, clear the queue index */
skl_free_queue(src_mcfg->m_out_pin, src_index);
skl_free_queue(dst_mcfg->m_in_pin, dst_index);
}
return ret;
}
static int skl_set_pipe_state(struct skl_sst *ctx, struct skl_pipe *pipe,
enum skl_ipc_pipeline_state state)
{
dev_dbg(ctx->dev, "%s: pipe_satate = %d\n", __func__, state);
return skl_ipc_set_pipeline_state(&ctx->ipc, pipe->ppl_id, state);
}
/*
* A pipeline is a collection of modules. Before a module in instantiated a
* pipeline needs to be created for it.
* This function creates pipeline, by sending create pipeline IPC messages
* to FW
*/
int skl_create_pipeline(struct skl_sst *ctx, struct skl_pipe *pipe)
{
int ret;
dev_dbg(ctx->dev, "%s: pipe_id = %d\n", __func__, pipe->ppl_id);
ret = skl_ipc_create_pipeline(&ctx->ipc, pipe->memory_pages,
pipe->pipe_priority, pipe->ppl_id);
if (ret < 0) {
dev_err(ctx->dev, "Failed to create pipeline\n");
return ret;
}
pipe->state = SKL_PIPE_CREATED;
return 0;
}
/*
* A pipeline needs to be deleted on cleanup. If a pipeline is running, then
* pause the pipeline first and then delete it
* The pipe delete is done by sending delete pipeline IPC. DSP will stop the
* DMA engines and releases resources
*/
int skl_delete_pipe(struct skl_sst *ctx, struct skl_pipe *pipe)
{
int ret;
dev_dbg(ctx->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id);
/* If pipe is not started, do not try to stop the pipe in FW. */
if (pipe->state > SKL_PIPE_STARTED) {
ret = skl_set_pipe_state(ctx, pipe, PPL_PAUSED);
if (ret < 0) {
dev_err(ctx->dev, "Failed to stop pipeline\n");
return ret;
}
pipe->state = SKL_PIPE_PAUSED;
} else {
/* If pipe was not created in FW, do not try to delete it */
if (pipe->state < SKL_PIPE_CREATED)
return 0;
ret = skl_ipc_delete_pipeline(&ctx->ipc, pipe->ppl_id);
if (ret < 0)
dev_err(ctx->dev, "Failed to delete pipeline\n");
}
return ret;
}
/*
* A pipeline is also a scheduling entity in DSP which can be run, stopped
* For processing data the pipe need to be run by sending IPC set pipe state
* to DSP
*/
int skl_run_pipe(struct skl_sst *ctx, struct skl_pipe *pipe)
{
int ret;
dev_dbg(ctx->dev, "%s: pipe = %d\n", __func__, pipe->ppl_id);
/* If pipe was not created in FW, do not try to pause or delete */
if (pipe->state < SKL_PIPE_CREATED)
return 0;
/* Pipe has to be paused before it is started */
ret = skl_set_pipe_state(ctx, pipe, PPL_PAUSED);
if (ret < 0) {
dev_err(ctx->dev, "Failed to pause pipe\n");
return ret;
}
pipe->state = SKL_PIPE_PAUSED;
ret = skl_set_pipe_state(ctx, pipe, PPL_RUNNING);
if (ret < 0) {
dev_err(ctx->dev, "Failed to start pipe\n");
return ret;
}
pipe->state = SKL_PIPE_STARTED;
return 0;
}
/*
* Stop the pipeline by sending set pipe state IPC
* DSP doesnt implement stop so we always send pause message
*/
int skl_stop_pipe(struct skl_sst *ctx, struct skl_pipe *pipe)
{
int ret;
dev_dbg(ctx->dev, "In %s pipe=%d\n", __func__, pipe->ppl_id);
/* If pipe was not created in FW, do not try to pause or delete */
if (pipe->state < SKL_PIPE_PAUSED)
return 0;
ret = skl_set_pipe_state(ctx, pipe, PPL_PAUSED);
if (ret < 0) {
dev_dbg(ctx->dev, "Failed to stop pipe\n");
return ret;
}
pipe->state = SKL_PIPE_CREATED;
return 0;
}