blob: 3d731d1b5c6014fed2c2fad7fb77171333b1d210 [file] [log] [blame]
/**
* dwc3-pci.c - PCI Specific glue layer
*
* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
*
* Authors: Felipe Balbi <balbi@ti.com>,
* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
#include <linux/acpi.h>
#include "platform_data.h"
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI 0xabce
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31 0xabcf
#define PCI_DEVICE_ID_INTEL_BYT 0x0f37
#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e
#define PCI_DEVICE_ID_INTEL_BSW 0x22b7
#define PCI_DEVICE_ID_INTEL_SPTLP 0x9d30
#define PCI_DEVICE_ID_INTEL_SPTH 0xa130
#define PCI_DEVICE_ID_INTEL_BXT 0x0aaa
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
static const struct acpi_gpio_params cs_gpios = { 1, 0, false };
static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
{ "reset-gpios", &reset_gpios, 1 },
{ "cs-gpios", &cs_gpios, 1 },
{ },
};
static int dwc3_pci_quirks(struct pci_dev *pdev)
{
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
struct dwc3_platform_data pdata;
memset(&pdata, 0, sizeof(pdata));
pdata.has_lpm_erratum = true;
pdata.lpm_nyet_threshold = 0xf;
pdata.u2exit_lfps_quirk = true;
pdata.u2ss_inp3_quirk = true;
pdata.req_p1p2p3_quirk = true;
pdata.del_p1p2p3_quirk = true;
pdata.del_phy_power_chg_quirk = true;
pdata.lfps_filter_quirk = true;
pdata.rx_detect_poll_quirk = true;
pdata.tx_de_emphasis_quirk = true;
pdata.tx_de_emphasis = 1;
/*
* FIXME these quirks should be removed when AMD NL
* taps out
*/
pdata.disable_scramble_quirk = true;
pdata.dis_u3_susphy_quirk = true;
pdata.dis_u2_susphy_quirk = true;
return platform_device_add_data(pci_get_drvdata(pdev), &pdata,
sizeof(pdata));
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
struct gpio_desc *gpio;
acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
acpi_dwc3_byt_gpios);
/*
* These GPIOs will turn on the USB2 PHY. Note that we have to
* put the gpio descriptors again here because the phy driver
* might want to grab them, too.
*/
gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(gpio))
return PTR_ERR(gpio);
if (gpio) {
gpiod_set_value_cansleep(gpio, 1);
gpiod_put(gpio);
usleep_range(10000, 11000);
}
}
if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
(pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
struct dwc3_platform_data pdata;
memset(&pdata, 0, sizeof(pdata));
pdata.usb3_lpm_capable = true;
pdata.has_lpm_erratum = true;
pdata.dis_enblslpm_quirk = true;
return platform_device_add_data(pci_get_drvdata(pdev), &pdata,
sizeof(pdata));
}
return 0;
}
static int dwc3_pci_probe(struct pci_dev *pci,
const struct pci_device_id *id)
{
struct resource res[2];
struct platform_device *dwc3;
int ret;
struct device *dev = &pci->dev;
ret = pcim_enable_device(pci);
if (ret) {
dev_err(dev, "failed to enable pci device\n");
return -ENODEV;
}
pci_set_master(pci);
dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO);
if (!dwc3) {
dev_err(dev, "couldn't allocate dwc3 device\n");
return -ENOMEM;
}
memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
res[0].start = pci_resource_start(pci, 0);
res[0].end = pci_resource_end(pci, 0);
res[0].name = "dwc_usb3";
res[0].flags = IORESOURCE_MEM;
res[1].start = pci->irq;
res[1].name = "dwc_usb3";
res[1].flags = IORESOURCE_IRQ;
ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res));
if (ret) {
dev_err(dev, "couldn't add resources to dwc3 device\n");
return ret;
}
pci_set_drvdata(pci, dwc3);
ret = dwc3_pci_quirks(pci);
if (ret)
goto err;
dwc3->dev.parent = dev;
ACPI_COMPANION_SET(&dwc3->dev, ACPI_COMPANION(dev));
ret = platform_device_add(dwc3);
if (ret) {
dev_err(dev, "failed to register dwc3 device\n");
goto err;
}
return 0;
err:
platform_device_put(dwc3);
return ret;
}
static void dwc3_pci_remove(struct pci_dev *pci)
{
acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
platform_device_unregister(pci_get_drvdata(pci));
}
static const struct pci_device_id dwc3_pci_id_table[] = {
{
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
},
{
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
},
{
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
},
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
static struct pci_driver dwc3_pci_driver = {
.name = "dwc3-pci",
.id_table = dwc3_pci_id_table,
.probe = dwc3_pci_probe,
.remove = dwc3_pci_remove,
};
MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
module_pci_driver(dwc3_pci_driver);