| /* |
| * Common library for ADIS16XXX devices |
| * |
| * Copyright 2012 Analog Devices Inc. |
| * Author: Lars-Peter Clausen <lars@metafoo.de> |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/export.h> |
| #include <linux/interrupt.h> |
| #include <linux/mutex.h> |
| #include <linux/kernel.h> |
| #include <linux/spi/spi.h> |
| #include <linux/slab.h> |
| |
| #include <linux/iio/iio.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/imu/adis.h> |
| |
| int adis_update_scan_mode(struct iio_dev *indio_dev, |
| const unsigned long *scan_mask) |
| { |
| struct adis *adis = iio_device_get_drvdata(indio_dev); |
| const struct iio_chan_spec *chan; |
| unsigned int scan_count; |
| unsigned int i, j; |
| __be16 *tx, *rx; |
| |
| kfree(adis->xfer); |
| kfree(adis->buffer); |
| |
| scan_count = indio_dev->scan_bytes / 2; |
| |
| adis->xfer = kcalloc(scan_count + 1, sizeof(*adis->xfer), GFP_KERNEL); |
| if (!adis->xfer) |
| return -ENOMEM; |
| |
| adis->buffer = kzalloc(indio_dev->scan_bytes * 2, GFP_KERNEL); |
| if (!adis->buffer) |
| return -ENOMEM; |
| |
| rx = adis->buffer; |
| tx = rx + scan_count; |
| |
| spi_message_init(&adis->msg); |
| |
| for (j = 0; j <= scan_count; j++) { |
| adis->xfer[j].bits_per_word = 8; |
| if (j != scan_count) |
| adis->xfer[j].cs_change = 1; |
| adis->xfer[j].len = 2; |
| adis->xfer[j].delay_usecs = adis->data->read_delay; |
| if (j < scan_count) |
| adis->xfer[j].tx_buf = &tx[j]; |
| if (j >= 1) |
| adis->xfer[j].rx_buf = &rx[j - 1]; |
| spi_message_add_tail(&adis->xfer[j], &adis->msg); |
| } |
| |
| chan = indio_dev->channels; |
| for (i = 0; i < indio_dev->num_channels; i++, chan++) { |
| if (!test_bit(chan->scan_index, scan_mask)) |
| continue; |
| if (chan->scan_type.storagebits == 32) |
| *tx++ = cpu_to_be16((chan->address + 2) << 8); |
| *tx++ = cpu_to_be16(chan->address << 8); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(adis_update_scan_mode); |
| |
| static irqreturn_t adis_trigger_handler(int irq, void *p) |
| { |
| struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct adis *adis = iio_device_get_drvdata(indio_dev); |
| int ret; |
| |
| if (!adis->buffer) |
| return -ENOMEM; |
| |
| if (adis->data->has_paging) { |
| mutex_lock(&adis->txrx_lock); |
| if (adis->current_page != 0) { |
| adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID); |
| adis->tx[1] = 0; |
| spi_write(adis->spi, adis->tx, 2); |
| } |
| } |
| |
| ret = spi_sync(adis->spi, &adis->msg); |
| if (ret) |
| dev_err(&adis->spi->dev, "Failed to read data: %d", ret); |
| |
| |
| if (adis->data->has_paging) { |
| adis->current_page = 0; |
| mutex_unlock(&adis->txrx_lock); |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer, |
| pf->timestamp); |
| |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * adis_setup_buffer_and_trigger() - Sets up buffer and trigger for the adis device |
| * @adis: The adis device. |
| * @indio_dev: The IIO device. |
| * @trigger_handler: Optional trigger handler, may be NULL. |
| * |
| * Returns 0 on success, a negative error code otherwise. |
| * |
| * This function sets up the buffer and trigger for a adis devices. If |
| * 'trigger_handler' is NULL the default trigger handler will be used. The |
| * default trigger handler will simply read the registers assigned to the |
| * currently active channels. |
| * |
| * adis_cleanup_buffer_and_trigger() should be called to free the resources |
| * allocated by this function. |
| */ |
| int adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev, |
| irqreturn_t (*trigger_handler)(int, void *)) |
| { |
| int ret; |
| |
| if (!trigger_handler) |
| trigger_handler = adis_trigger_handler; |
| |
| ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, |
| trigger_handler, NULL); |
| if (ret) |
| return ret; |
| |
| if (adis->spi->irq) { |
| ret = adis_probe_trigger(adis, indio_dev); |
| if (ret) |
| goto error_buffer_cleanup; |
| } |
| return 0; |
| |
| error_buffer_cleanup: |
| iio_triggered_buffer_cleanup(indio_dev); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(adis_setup_buffer_and_trigger); |
| |
| /** |
| * adis_cleanup_buffer_and_trigger() - Free buffer and trigger resources |
| * @adis: The adis device. |
| * @indio_dev: The IIO device. |
| * |
| * Frees resources allocated by adis_setup_buffer_and_trigger() |
| */ |
| void adis_cleanup_buffer_and_trigger(struct adis *adis, |
| struct iio_dev *indio_dev) |
| { |
| if (adis->spi->irq) |
| adis_remove_trigger(adis); |
| kfree(adis->buffer); |
| kfree(adis->xfer); |
| iio_triggered_buffer_cleanup(indio_dev); |
| } |
| EXPORT_SYMBOL_GPL(adis_cleanup_buffer_and_trigger); |