blob: 9b867169142fd811fe1cda81d834860f9e31af8b [file] [log] [blame]
/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Xudong Chen <xudong.chen@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/sched.h>
#include <linux/slab.h>
#define I2C_RS_TRANSFER (1 << 4)
#define I2C_HS_NACKERR (1 << 2)
#define I2C_ACKERR (1 << 1)
#define I2C_TRANSAC_COMP (1 << 0)
#define I2C_TRANSAC_START (1 << 0)
#define I2C_RS_MUL_CNFG (1 << 15)
#define I2C_RS_MUL_TRIG (1 << 14)
#define I2C_DCM_DISABLE 0x0000
#define I2C_IO_CONFIG_OPEN_DRAIN 0x0003
#define I2C_IO_CONFIG_PUSH_PULL 0x0000
#define I2C_SOFT_RST 0x0001
#define I2C_FIFO_ADDR_CLR 0x0001
#define I2C_DELAY_LEN 0x0002
#define I2C_ST_START_CON 0x8001
#define I2C_FS_START_CON 0x1800
#define I2C_TIME_CLR_VALUE 0x0000
#define I2C_TIME_DEFAULT_VALUE 0x0003
#define I2C_FS_TIME_INIT_VALUE 0x1303
#define I2C_WRRD_TRANAC_VALUE 0x0002
#define I2C_RD_TRANAC_VALUE 0x0001
#define I2C_DMA_CON_TX 0x0000
#define I2C_DMA_CON_RX 0x0001
#define I2C_DMA_START_EN 0x0001
#define I2C_DMA_INT_FLAG_NONE 0x0000
#define I2C_DMA_CLR_FLAG 0x0000
#define I2C_DMA_HARD_RST 0x0002
#define I2C_DEFAULT_SPEED 100000 /* hz */
#define MAX_FS_MODE_SPEED 400000
#define MAX_HS_MODE_SPEED 3400000
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
#define MAX_HS_STEP_CNT_DIV 8
#define I2C_CONTROL_RS (0x1 << 1)
#define I2C_CONTROL_DMA_EN (0x1 << 2)
#define I2C_CONTROL_CLK_EXT_EN (0x1 << 3)
#define I2C_CONTROL_DIR_CHANGE (0x1 << 4)
#define I2C_CONTROL_ACKERR_DET_EN (0x1 << 5)
#define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
#define I2C_CONTROL_WRAPPER (0x1 << 0)
#define I2C_DRV_NAME "i2c-mt65xx"
enum DMA_REGS_OFFSET {
OFFSET_INT_FLAG = 0x0,
OFFSET_INT_EN = 0x04,
OFFSET_EN = 0x08,
OFFSET_RST = 0x0c,
OFFSET_CON = 0x18,
OFFSET_TX_MEM_ADDR = 0x1c,
OFFSET_RX_MEM_ADDR = 0x20,
OFFSET_TX_LEN = 0x24,
OFFSET_RX_LEN = 0x28,
};
enum i2c_trans_st_rs {
I2C_TRANS_STOP = 0,
I2C_TRANS_REPEATED_START,
};
enum mtk_trans_op {
I2C_MASTER_WR = 1,
I2C_MASTER_RD,
I2C_MASTER_WRRD,
};
enum I2C_REGS_OFFSET {
OFFSET_DATA_PORT = 0x0,
OFFSET_SLAVE_ADDR = 0x04,
OFFSET_INTR_MASK = 0x08,
OFFSET_INTR_STAT = 0x0c,
OFFSET_CONTROL = 0x10,
OFFSET_TRANSFER_LEN = 0x14,
OFFSET_TRANSAC_LEN = 0x18,
OFFSET_DELAY_LEN = 0x1c,
OFFSET_TIMING = 0x20,
OFFSET_START = 0x24,
OFFSET_EXT_CONF = 0x28,
OFFSET_FIFO_STAT = 0x30,
OFFSET_FIFO_THRESH = 0x34,
OFFSET_FIFO_ADDR_CLR = 0x38,
OFFSET_IO_CONFIG = 0x40,
OFFSET_RSV_DEBUG = 0x44,
OFFSET_HS = 0x48,
OFFSET_SOFTRESET = 0x50,
OFFSET_DCM_EN = 0x54,
OFFSET_PATH_DIR = 0x60,
OFFSET_DEBUGSTAT = 0x64,
OFFSET_DEBUGCTRL = 0x68,
OFFSET_TRANSFER_LEN_AUX = 0x6c,
};
struct mtk_i2c_compatible {
const struct i2c_adapter_quirks *quirks;
unsigned char pmic_i2c: 1;
unsigned char dcm: 1;
unsigned char auto_restart: 1;
};
struct mtk_i2c {
struct i2c_adapter adap; /* i2c host adapter */
struct device *dev;
struct completion msg_complete;
/* set in i2c probe */
void __iomem *base; /* i2c base addr */
void __iomem *pdmabase; /* dma base address*/
struct clk *clk_main; /* main clock for i2c bus */
struct clk *clk_dma; /* DMA clock for i2c via DMA */
struct clk *clk_pmic; /* PMIC clock for i2c from PMIC */
bool have_pmic; /* can use i2c pins from PMIC */
bool use_push_pull; /* IO config push-pull mode */
u16 irq_stat; /* interrupt status */
unsigned int speed_hz; /* The speed in transfer */
enum mtk_trans_op op;
u16 timing_reg;
u16 high_speed_reg;
const struct mtk_i2c_compatible *dev_comp;
};
static const struct i2c_adapter_quirks mt6577_i2c_quirks = {
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
.max_num_msgs = 1,
.max_write_len = 255,
.max_read_len = 255,
.max_comb_1st_msg_len = 255,
.max_comb_2nd_msg_len = 31,
};
static const struct i2c_adapter_quirks mt8173_i2c_quirks = {
.max_num_msgs = 65535,
.max_write_len = 65535,
.max_read_len = 65535,
.max_comb_1st_msg_len = 65535,
.max_comb_2nd_msg_len = 65535,
};
static const struct mtk_i2c_compatible mt6577_compat = {
.quirks = &mt6577_i2c_quirks,
.pmic_i2c = 0,
.dcm = 1,
.auto_restart = 0,
};
static const struct mtk_i2c_compatible mt6589_compat = {
.quirks = &mt6577_i2c_quirks,
.pmic_i2c = 1,
.dcm = 0,
.auto_restart = 0,
};
static const struct mtk_i2c_compatible mt8173_compat = {
.quirks = &mt8173_i2c_quirks,
.pmic_i2c = 0,
.dcm = 1,
.auto_restart = 1,
};
static const struct of_device_id mtk_i2c_of_match[] = {
{ .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
{}
};
MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
{
int ret;
ret = clk_prepare_enable(i2c->clk_dma);
if (ret)
return ret;
ret = clk_prepare_enable(i2c->clk_main);
if (ret)
goto err_main;
if (i2c->have_pmic) {
ret = clk_prepare_enable(i2c->clk_pmic);
if (ret)
goto err_pmic;
}
return 0;
err_pmic:
clk_disable_unprepare(i2c->clk_main);
err_main:
clk_disable_unprepare(i2c->clk_dma);
return ret;
}
static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
{
if (i2c->have_pmic)
clk_disable_unprepare(i2c->clk_pmic);
clk_disable_unprepare(i2c->clk_main);
clk_disable_unprepare(i2c->clk_dma);
}
static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
writew(I2C_SOFT_RST, i2c->base + OFFSET_SOFTRESET);
/* Set ioconfig */
if (i2c->use_push_pull)
writew(I2C_IO_CONFIG_PUSH_PULL, i2c->base + OFFSET_IO_CONFIG);
else
writew(I2C_IO_CONFIG_OPEN_DRAIN, i2c->base + OFFSET_IO_CONFIG);
if (i2c->dev_comp->dcm)
writew(I2C_DCM_DISABLE, i2c->base + OFFSET_DCM_EN);
writew(i2c->timing_reg, i2c->base + OFFSET_TIMING);
writew(i2c->high_speed_reg, i2c->base + OFFSET_HS);
/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
if (i2c->have_pmic)
writew(I2C_CONTROL_WRAPPER, i2c->base + OFFSET_PATH_DIR);
control_reg = I2C_CONTROL_ACKERR_DET_EN |
I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
writew(control_reg, i2c->base + OFFSET_CONTROL);
writew(I2C_DELAY_LEN, i2c->base + OFFSET_DELAY_LEN);
writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST);
udelay(50);
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
}
/*
* Calculate i2c port speed
*
* Hardware design:
* i2c_bus_freq = parent_clk / (clock_div * 2 * sample_cnt * step_cnt)
* clock_div: fixed in hardware, but may be various in different SoCs
*
* The calculation want to pick the highest bus frequency that is still
* less than or equal to i2c->speed_hz. The calculation try to get
* sample_cnt and step_cn
*/
static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk,
unsigned int clock_div)
{
unsigned int clk_src;
unsigned int step_cnt;
unsigned int sample_cnt;
unsigned int max_step_cnt;
unsigned int target_speed;
unsigned int base_sample_cnt = MAX_SAMPLE_CNT_DIV;
unsigned int base_step_cnt;
unsigned int opt_div;
unsigned int best_mul;
unsigned int cnt_mul;
clk_src = parent_clk / clock_div;
target_speed = i2c->speed_hz;
if (target_speed > MAX_HS_MODE_SPEED)
target_speed = MAX_HS_MODE_SPEED;
if (target_speed > MAX_FS_MODE_SPEED)
max_step_cnt = MAX_HS_STEP_CNT_DIV;
else
max_step_cnt = MAX_STEP_CNT_DIV;
base_step_cnt = max_step_cnt;
/* Find the best combination */
opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed);
best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt;
/* Search for the best pair (sample_cnt, step_cnt) with
* 0 < sample_cnt < MAX_SAMPLE_CNT_DIV
* 0 < step_cnt < max_step_cnt
* sample_cnt * step_cnt >= opt_div
* optimizing for sample_cnt * step_cnt being minimal
*/
for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) {
step_cnt = DIV_ROUND_UP(opt_div, sample_cnt);
cnt_mul = step_cnt * sample_cnt;
if (step_cnt > max_step_cnt)
continue;
if (cnt_mul < best_mul) {
best_mul = cnt_mul;
base_sample_cnt = sample_cnt;
base_step_cnt = step_cnt;
if (best_mul == opt_div)
break;
}
}
sample_cnt = base_sample_cnt;
step_cnt = base_step_cnt;
if ((clk_src / (2 * sample_cnt * step_cnt)) > target_speed) {
/* In this case, hardware can't support such
* low i2c_bus_freq
*/
dev_dbg(i2c->dev, "Unsupported speed (%uhz)\n", target_speed);
return -EINVAL;
}
step_cnt--;
sample_cnt--;
if (target_speed > MAX_FS_MODE_SPEED) {
/* Set the high speed mode register */
i2c->timing_reg = I2C_FS_TIME_INIT_VALUE;
i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
(sample_cnt << 12) | (step_cnt << 8);
} else {
i2c->timing_reg = (sample_cnt << 8) | (step_cnt << 0);
/* Disable the high speed transaction */
i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
}
return 0;
}
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
u16 addr_reg;
u16 start_reg;
u16 control_reg;
u16 restart_flag = 0;
dma_addr_t rpaddr = 0;
dma_addr_t wpaddr = 0;
int ret;
i2c->irq_stat = 0;
if (i2c->dev_comp->auto_restart)
restart_flag = I2C_RS_TRANSFER;
reinit_completion(&i2c->msg_complete);
control_reg = readw(i2c->base + OFFSET_CONTROL) &
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
if ((i2c->speed_hz > 400000) || (left_num >= 1))
control_reg |= I2C_CONTROL_RS;
if (i2c->op == I2C_MASTER_WRRD)
control_reg |= I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS;
writew(control_reg, i2c->base + OFFSET_CONTROL);
/* set start condition */
if (i2c->speed_hz <= 100000)
writew(I2C_ST_START_CON, i2c->base + OFFSET_EXT_CONF);
else
writew(I2C_FS_START_CON, i2c->base + OFFSET_EXT_CONF);
addr_reg = msgs->addr << 1;
if (i2c->op == I2C_MASTER_RD)
addr_reg |= 0x1;
writew(addr_reg, i2c->base + OFFSET_SLAVE_ADDR);
/* Clear interrupt status */
writew(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
I2C_TRANSAC_COMP, i2c->base + OFFSET_INTR_STAT);
writew(I2C_FIFO_ADDR_CLR, i2c->base + OFFSET_FIFO_ADDR_CLR);
/* Enable interrupt */
writew(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
I2C_TRANSAC_COMP, i2c->base + OFFSET_INTR_MASK);
/* Set transfer and transaction len */
if (i2c->op == I2C_MASTER_WRRD) {
writew(msgs->len | ((msgs + 1)->len) << 8,
i2c->base + OFFSET_TRANSFER_LEN);
writew(I2C_WRRD_TRANAC_VALUE, i2c->base + OFFSET_TRANSAC_LEN);
} else {
writew(msgs->len, i2c->base + OFFSET_TRANSFER_LEN);
writew(num, i2c->base + OFFSET_TRANSAC_LEN);
}
/* Prepare buffer data to start transfer */
if (i2c->op == I2C_MASTER_RD) {
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
rpaddr = dma_map_single(i2c->dev, msgs->buf,
msgs->len, DMA_FROM_DEVICE);
if (dma_mapping_error(i2c->dev, rpaddr))
return -ENOMEM;
writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
} else if (i2c->op == I2C_MASTER_WR) {
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
wpaddr = dma_map_single(i2c->dev, msgs->buf,
msgs->len, DMA_TO_DEVICE);
if (dma_mapping_error(i2c->dev, wpaddr))
return -ENOMEM;
writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
} else {
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
wpaddr = dma_map_single(i2c->dev, msgs->buf,
msgs->len, DMA_TO_DEVICE);
if (dma_mapping_error(i2c->dev, wpaddr))
return -ENOMEM;
rpaddr = dma_map_single(i2c->dev, (msgs + 1)->buf,
(msgs + 1)->len,
DMA_FROM_DEVICE);
if (dma_mapping_error(i2c->dev, rpaddr)) {
dma_unmap_single(i2c->dev, wpaddr,
msgs->len, DMA_TO_DEVICE);
return -ENOMEM;
}
writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
writel((msgs + 1)->len, i2c->pdmabase + OFFSET_RX_LEN);
}
writel(I2C_DMA_START_EN, i2c->pdmabase + OFFSET_EN);
if (!i2c->dev_comp->auto_restart) {
start_reg = I2C_TRANSAC_START;
} else {
start_reg = I2C_TRANSAC_START | I2C_RS_MUL_TRIG;
if (left_num >= 1)
start_reg |= I2C_RS_MUL_CNFG;
}
writew(start_reg, i2c->base + OFFSET_START);
ret = wait_for_completion_timeout(&i2c->msg_complete,
i2c->adap.timeout);
/* Clear interrupt mask */
writew(~(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
I2C_TRANSAC_COMP), i2c->base + OFFSET_INTR_MASK);
if (i2c->op == I2C_MASTER_WR) {
dma_unmap_single(i2c->dev, wpaddr,
msgs->len, DMA_TO_DEVICE);
} else if (i2c->op == I2C_MASTER_RD) {
dma_unmap_single(i2c->dev, rpaddr,
msgs->len, DMA_FROM_DEVICE);
} else {
dma_unmap_single(i2c->dev, wpaddr, msgs->len,
DMA_TO_DEVICE);
dma_unmap_single(i2c->dev, rpaddr, (msgs + 1)->len,
DMA_FROM_DEVICE);
}
if (ret == 0) {
dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
mtk_i2c_init_hw(i2c);
return -ETIMEDOUT;
}
completion_done(&i2c->msg_complete);
if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr);
mtk_i2c_init_hw(i2c);
return -ENXIO;
}
return 0;
}
static int mtk_i2c_transfer(struct i2c_adapter *adap,
struct i2c_msg msgs[], int num)
{
int ret;
int left_num = num;
struct mtk_i2c *i2c = i2c_get_adapdata(adap);
ret = mtk_i2c_clock_enable(i2c);
if (ret)
return ret;
while (left_num--) {
if (!msgs->buf) {
dev_dbg(i2c->dev, "data buffer is NULL.\n");
ret = -EINVAL;
goto err_exit;
}
if (msgs->flags & I2C_M_RD)
i2c->op = I2C_MASTER_RD;
else
i2c->op = I2C_MASTER_WR;
if (!i2c->dev_comp->auto_restart) {
if (num > 1) {
/* combined two messages into one transaction */
i2c->op = I2C_MASTER_WRRD;
left_num--;
}
}
/* always use DMA mode. */
ret = mtk_i2c_do_transfer(i2c, msgs, num, left_num);
if (ret < 0)
goto err_exit;
msgs++;
}
/* the return value is number of executed messages */
ret = num;
err_exit:
mtk_i2c_clock_disable(i2c);
return ret;
}
static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
{
struct mtk_i2c *i2c = dev_id;
u16 restart_flag = 0;
u16 intr_stat;
if (i2c->dev_comp->auto_restart)
restart_flag = I2C_RS_TRANSFER;
intr_stat = readw(i2c->base + OFFSET_INTR_STAT);
writew(intr_stat, i2c->base + OFFSET_INTR_STAT);
/*
* when occurs ack error, i2c controller generate two interrupts
* first is the ack error interrupt, then the complete interrupt
* i2c->irq_stat need keep the two interrupt value.
*/
i2c->irq_stat |= intr_stat;
if (i2c->irq_stat & (I2C_TRANSAC_COMP | restart_flag))
complete(&i2c->msg_complete);
return IRQ_HANDLED;
}
static u32 mtk_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm mtk_i2c_algorithm = {
.master_xfer = mtk_i2c_transfer,
.functionality = mtk_i2c_functionality,
};
static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c,
unsigned int *clk_src_div)
{
int ret;
ret = of_property_read_u32(np, "clock-frequency", &i2c->speed_hz);
if (ret < 0)
i2c->speed_hz = I2C_DEFAULT_SPEED;
ret = of_property_read_u32(np, "clock-div", clk_src_div);
if (ret < 0)
return ret;
if (*clk_src_div == 0)
return -EINVAL;
i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
i2c->use_push_pull =
of_property_read_bool(np, "mediatek,use-push-pull");
return 0;
}
static int mtk_i2c_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id;
int ret = 0;
struct mtk_i2c *i2c;
struct clk *clk;
unsigned int clk_src_div;
struct resource *res;
int irq;
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c, &clk_src_div);
if (ret)
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(i2c->base))
return PTR_ERR(i2c->base);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
i2c->pdmabase = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(i2c->pdmabase))
return PTR_ERR(i2c->pdmabase);
irq = platform_get_irq(pdev, 0);
if (irq <= 0)
return irq;
init_completion(&i2c->msg_complete);
of_id = of_match_node(mtk_i2c_of_match, pdev->dev.of_node);
if (!of_id)
return -EINVAL;
i2c->dev_comp = of_id->data;
i2c->adap.dev.of_node = pdev->dev.of_node;
i2c->dev = &pdev->dev;
i2c->adap.dev.parent = &pdev->dev;
i2c->adap.owner = THIS_MODULE;
i2c->adap.algo = &mtk_i2c_algorithm;
i2c->adap.quirks = i2c->dev_comp->quirks;
i2c->adap.timeout = 2 * HZ;
i2c->adap.retries = 1;
if (i2c->have_pmic && !i2c->dev_comp->pmic_i2c)
return -EINVAL;
i2c->clk_main = devm_clk_get(&pdev->dev, "main");
if (IS_ERR(i2c->clk_main)) {
dev_err(&pdev->dev, "cannot get main clock\n");
return PTR_ERR(i2c->clk_main);
}
i2c->clk_dma = devm_clk_get(&pdev->dev, "dma");
if (IS_ERR(i2c->clk_dma)) {
dev_err(&pdev->dev, "cannot get dma clock\n");
return PTR_ERR(i2c->clk_dma);
}
clk = i2c->clk_main;
if (i2c->have_pmic) {
i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic");
if (IS_ERR(i2c->clk_pmic)) {
dev_err(&pdev->dev, "cannot get pmic clock\n");
return PTR_ERR(i2c->clk_pmic);
}
clk = i2c->clk_pmic;
}
strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk), clk_src_div);
if (ret) {
dev_err(&pdev->dev, "Failed to set the speed.\n");
return -EINVAL;
}
ret = mtk_i2c_clock_enable(i2c);
if (ret) {
dev_err(&pdev->dev, "clock enable failed!\n");
return ret;
}
mtk_i2c_init_hw(i2c);
mtk_i2c_clock_disable(i2c);
ret = devm_request_irq(&pdev->dev, irq, mtk_i2c_irq,
IRQF_TRIGGER_NONE, I2C_DRV_NAME, i2c);
if (ret < 0) {
dev_err(&pdev->dev,
"Request I2C IRQ %d fail\n", irq);
return ret;
}
i2c_set_adapdata(&i2c->adap, i2c);
ret = i2c_add_adapter(&i2c->adap);
if (ret) {
dev_err(&pdev->dev, "Failed to add i2c bus to i2c core\n");
return ret;
}
platform_set_drvdata(pdev, i2c);
return 0;
}
static int mtk_i2c_remove(struct platform_device *pdev)
{
struct mtk_i2c *i2c = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c->adap);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int mtk_i2c_resume(struct device *dev)
{
struct mtk_i2c *i2c = dev_get_drvdata(dev);
mtk_i2c_init_hw(i2c);
return 0;
}
#endif
static const struct dev_pm_ops mtk_i2c_pm = {
SET_SYSTEM_SLEEP_PM_OPS(NULL, mtk_i2c_resume)
};
static struct platform_driver mtk_i2c_driver = {
.probe = mtk_i2c_probe,
.remove = mtk_i2c_remove,
.driver = {
.name = I2C_DRV_NAME,
.pm = &mtk_i2c_pm,
.of_match_table = of_match_ptr(mtk_i2c_of_match),
},
};
module_platform_driver(mtk_i2c_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MediaTek I2C Bus Driver");
MODULE_AUTHOR("Xudong Chen <xudong.chen@mediatek.com>");