arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi - kernel/bruno - Git at Google

 /*
  * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
  *
  * Copyright 2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *       notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *       notice, this list of conditions and the following disclaimer in the
  *       documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *       names of its contributors may be used to endorse or promote products
  *       derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 &lbc {
 	nor@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
 		reg = <0x0 0x0 0x1000000>;
 		bank-width = <2>;
 		device-width = <1>;

 		partition@0 {
 			/* This location must not be altered  */
 			/* 256KB for Vitesse 7385 Switch firmware */
 			reg = <0x0 0x00040000>;
 			label = "NOR Vitesse-7385 Firmware";
 			read-only;
 		};

 		partition@40000 {
 			/* 256KB for DTB Image */
 			reg = <0x00040000 0x00040000>;
 			label = "NOR DTB Image";
 		};

 		partition@80000 {
 			/* 3.5 MB for Linux Kernel Image */
 			reg = <0x00080000 0x00380000>;
 			label = "NOR Linux Kernel Image";
 		};

 		partition@400000 {
 			/* 10.75MB for JFFS2 based Root file System */
 			reg = <0x00400000 0x00ac0000>;
 			label = "NOR JFFS2 Root File System";
 		};

 		partition@ec0000 {
 			/* This location must not be altered  */
 			/* 256KB for QE ucode firmware*/
 			reg = <0x00ec0000 0x00040000>;
 			label = "NOR QE microcode firmware";
 			read-only;
 		};

 		partition@f00000 {
 			/* This location must not be altered  */
 			/* 512KB for u-boot Bootloader Image */
 			/* 512KB for u-boot Environment Variables */
 			reg = <0x00f00000 0x00100000>;
 			label = "NOR U-Boot Image";
 		};
 	};

 	nand@1,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,p1021-fcm-nand",
 			     "fsl,elbc-fcm-nand";
 		reg = <0x1 0x0 0x40000>;

 		partition@0 {
 			/* This location must not be altered  */
 			/* 1MB for u-boot Bootloader Image */
 			reg = <0x0 0x00100000>;
 			label = "NAND U-Boot Image";
 			read-only;
 		};

 		partition@100000 {
 			/* 1MB for DTB Image */
 			reg = <0x00100000 0x00100000>;
 			label = "NAND DTB Image";
 		};

 		partition@200000 {
 			/* 4MB for Linux Kernel Image */
 			reg = <0x00200000 0x00400000>;
 			label = "NAND Linux Kernel Image";
 		};

 		partition@600000 {
 			/* 4MB for Compressed Root file System Image */
 			reg = <0x00600000 0x00400000>;
 			label = "NAND Compressed RFS Image";
 		};

 		partition@a00000 {
 			/* 7MB for JFFS2 based Root file System */
 			reg = <0x00a00000 0x00700000>;
 			label = "NAND JFFS2 Root File System";
 		};

 		partition@1100000 {
 			/* 15MB for User Writable Area  */
 			reg = <0x01100000 0x00f00000>;
 			label = "NAND Writable User area";
 		};
 	};

 	L2switch@2,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "vitesse-7385";
 		reg = <0x2 0x0 0x20000>;
 	};
 };

 &soc {
 	i2c@3000 {
 		rtc@68 {
 			compatible = "pericom,pt7c4338";
 			reg = <0x68>;
 		};
 	};

 	spi@7000 {
 		flash@0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "spansion,s25sl12801";
 			reg = <0>;
 			spi-max-frequency = <40000000>; /* input clock */

 			partition@u-boot {
 				/* 512KB for u-boot Bootloader Image */
 				reg = <0x0 0x00080000>;
 				label = "SPI Flash U-Boot Image";
 				read-only;
 			};

 			partition@dtb {
 				/* 512KB for DTB Image */
 				reg = <0x00080000 0x00080000>;
 				label = "SPI Flash DTB Image";
 			};

 			partition@kernel {
 				/* 4MB for Linux Kernel Image */
 				reg = <0x00100000 0x00400000>;
 				label = "SPI Flash Linux Kernel Image";
 			};

 			partition@fs {
 				/* 4MB for Compressed RFS Image */
 				reg = <0x00500000 0x00400000>;
 				label = "SPI Flash Compressed RFSImage";
 			};

 			partition@jffs-fs {
 				/* 7MB for JFFS2 based RFS */
 				reg = <0x00900000 0x00700000>;
 				label = "SPI Flash JFFS2 RFS";
 			};
 		};
 	};

 	usb@22000 {
 		phy_type = "ulpi";
 	};

 	mdio@24000 {
 		phy0: ethernet-phy@0 {
 			interrupt-parent = <&mpic>;
 			interrupts = <3 1 0 0>;
 			reg = <0x0>;
 		};

 		phy1: ethernet-phy@1 {
 			interrupt-parent = <&mpic>;
 			interrupts = <2 1 0 0>;
 			reg = <0x1>;
 		};

 		tbi0: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";
 		};
 	};

 	mdio@25000 {
 		tbi1: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";
 		};
 	};

 	mdio@26000 {
 		tbi2: tbi-phy@11 {
 			reg = <0x11>;
 			device_type = "tbi-phy";
 		};
 	};

 	ptp_clock@b0e00 {
 		compatible = "fsl,etsec-ptp";
 		reg = <0xb0e00 0xb0>;
 		interrupts = <68 2 0 0 69 2 0 0>;
 		fsl,tclk-period	= <10>;
 		fsl,tmr-prsc	= <2>;
 		fsl,tmr-add	= <0x80000016>;
 		fsl,tmr-fiper1	= <999999990>;
 		fsl,tmr-fiper2	= <99990>;
 		fsl,max-adj	= <199999999>;
 	};

 	enet0: ethernet@b0000 {
 		fixed-link = <1 1 1000 0 0>;
 		phy-connection-type = "rgmii-id";

 	};

 	enet1: ethernet@b1000 {
 		phy-handle = <&phy0>;
 		tbi-handle = <&tbi1>;
 		phy-connection-type = "sgmii";
 	};

 	enet2: ethernet@b2000 {
 		phy-handle = <&phy1>;
 		tbi-handle = <&tbi2>;
 		phy-connection-type = "rgmii-id";
 	};
 };
	/*
	* P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
	*
	* Copyright 2012 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	&lbc {
	nor@0,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "cfi-flash";
	reg = <0x0 0x0 0x1000000>;
	bank-width = <2>;
	device-width = <1>;

	partition@0 {
	/* This location must not be altered */
	/* 256KB for Vitesse 7385 Switch firmware */
	reg = <0x0 0x00040000>;
	label = "NOR Vitesse-7385 Firmware";
	read-only;
	};

	partition@40000 {
	/* 256KB for DTB Image */
	reg = <0x00040000 0x00040000>;
	label = "NOR DTB Image";
	};

	partition@80000 {
	/* 3.5 MB for Linux Kernel Image */
	reg = <0x00080000 0x00380000>;
	label = "NOR Linux Kernel Image";
	};

	partition@400000 {
	/* 10.75MB for JFFS2 based Root file System */
	reg = <0x00400000 0x00ac0000>;
	label = "NOR JFFS2 Root File System";
	};

	partition@ec0000 {
	/* This location must not be altered */
	/* 256KB for QE ucode firmware*/
	reg = <0x00ec0000 0x00040000>;
	label = "NOR QE microcode firmware";
	read-only;
	};

	partition@f00000 {
	/* This location must not be altered */
	/* 512KB for u-boot Bootloader Image */
	/* 512KB for u-boot Environment Variables */
	reg = <0x00f00000 0x00100000>;
	label = "NOR U-Boot Image";
	};
	};

	nand@1,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,p1021-fcm-nand",
	"fsl,elbc-fcm-nand";
	reg = <0x1 0x0 0x40000>;

	partition@0 {
	/* This location must not be altered */
	/* 1MB for u-boot Bootloader Image */
	reg = <0x0 0x00100000>;
	label = "NAND U-Boot Image";
	read-only;
	};

	partition@100000 {
	/* 1MB for DTB Image */
	reg = <0x00100000 0x00100000>;
	label = "NAND DTB Image";
	};

	partition@200000 {
	/* 4MB for Linux Kernel Image */
	reg = <0x00200000 0x00400000>;
	label = "NAND Linux Kernel Image";
	};

	partition@600000 {
	/* 4MB for Compressed Root file System Image */
	reg = <0x00600000 0x00400000>;
	label = "NAND Compressed RFS Image";
	};

	partition@a00000 {
	/* 7MB for JFFS2 based Root file System */
	reg = <0x00a00000 0x00700000>;
	label = "NAND JFFS2 Root File System";
	};

	partition@1100000 {
	/* 15MB for User Writable Area */
	reg = <0x01100000 0x00f00000>;
	label = "NAND Writable User area";
	};
	};

	L2switch@2,0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "vitesse-7385";
	reg = <0x2 0x0 0x20000>;
	};
	};

	&soc {
	i2c@3000 {
	rtc@68 {
	compatible = "pericom,pt7c4338";
	reg = <0x68>;
	};
	};

	spi@7000 {
	flash@0 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "spansion,s25sl12801";
	reg = <0>;
	spi-max-frequency = <40000000>; /* input clock */

	partition@u-boot {
	/* 512KB for u-boot Bootloader Image */
	reg = <0x0 0x00080000>;
	label = "SPI Flash U-Boot Image";
	read-only;
	};

	partition@dtb {
	/* 512KB for DTB Image */
	reg = <0x00080000 0x00080000>;
	label = "SPI Flash DTB Image";
	};

	partition@kernel {
	/* 4MB for Linux Kernel Image */
	reg = <0x00100000 0x00400000>;
	label = "SPI Flash Linux Kernel Image";
	};

	partition@fs {
	/* 4MB for Compressed RFS Image */
	reg = <0x00500000 0x00400000>;
	label = "SPI Flash Compressed RFSImage";
	};

	partition@jffs-fs {
	/* 7MB for JFFS2 based RFS */
	reg = <0x00900000 0x00700000>;
	label = "SPI Flash JFFS2 RFS";
	};
	};
	};

	usb@22000 {
	phy_type = "ulpi";
	};

	mdio@24000 {
	phy0: ethernet-phy@0 {
	interrupt-parent = <&mpic>;
	interrupts = <3 1 0 0>;
	reg = <0x0>;
	};

	phy1: ethernet-phy@1 {
	interrupt-parent = <&mpic>;
	interrupts = <2 1 0 0>;
	reg = <0x1>;
	};

	tbi0: tbi-phy@11 {
	reg = <0x11>;
	device_type = "tbi-phy";
	};
	};

	mdio@25000 {
	tbi1: tbi-phy@11 {
	reg = <0x11>;
	device_type = "tbi-phy";
	};
	};

	mdio@26000 {
	tbi2: tbi-phy@11 {
	reg = <0x11>;
	device_type = "tbi-phy";
	};
	};

	ptp_clock@b0e00 {
	compatible = "fsl,etsec-ptp";
	reg = <0xb0e00 0xb0>;
	interrupts = <68 2 0 0 69 2 0 0>;
	fsl,tclk-period = <10>;
	fsl,tmr-prsc = <2>;
	fsl,tmr-add = <0x80000016>;
	fsl,tmr-fiper1 = <999999990>;
	fsl,tmr-fiper2 = <99990>;
	fsl,max-adj = <199999999>;
	};

	enet0: ethernet@b0000 {
	fixed-link = <1 1 1000 0 0>;
	phy-connection-type = "rgmii-id";

	};

	enet1: ethernet@b1000 {
	phy-handle = <&phy0>;
	tbi-handle = <&tbi1>;
	phy-connection-type = "sgmii";
	};

	enet2: ethernet@b2000 {
	phy-handle = <&phy1>;
	tbi-handle = <&tbi2>;
	phy-connection-type = "rgmii-id";
	};
	};