arch/arm/mach-bcm/platsmp-brcmstb.c - kernel/bruno - Git at Google

 /*
  * Broadcom STB CPU SMP and hotplug support for ARM
  *
  * Copyright (C) 2013-2014 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation version 2.
  *
  * This program is distributed "as is" WITHOUT ANY WARRANTY of any
  * kind, whether express or implied; without even the implied warranty
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */

 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/printk.h>
 #include <linux/regmap.h>
 #include <linux/smp.h>
 #include <linux/mfd/syscon.h>

 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>

 enum {
 	ZONE_MAN_CLKEN_MASK		= BIT(0),
 	ZONE_MAN_RESET_CNTL_MASK	= BIT(1),
 	ZONE_MAN_MEM_PWR_MASK		= BIT(4),
 	ZONE_RESERVED_1_MASK		= BIT(5),
 	ZONE_MAN_ISO_CNTL_MASK		= BIT(6),
 	ZONE_MANUAL_CONTROL_MASK	= BIT(7),
 	ZONE_PWR_DN_REQ_MASK		= BIT(9),
 	ZONE_PWR_UP_REQ_MASK		= BIT(10),
 	ZONE_BLK_RST_ASSERT_MASK	= BIT(12),
 	ZONE_PWR_OFF_STATE_MASK		= BIT(25),
 	ZONE_PWR_ON_STATE_MASK		= BIT(26),
 	ZONE_DPG_PWR_STATE_MASK		= BIT(28),
 	ZONE_MEM_PWR_STATE_MASK		= BIT(29),
 	ZONE_RESET_STATE_MASK		= BIT(31),
 	CPU0_PWR_ZONE_CTRL_REG		= 1,
 	CPU_RESET_CONFIG_REG		= 2,
 };

 static void __iomem *cpubiuctrl_block;
 static void __iomem *hif_cont_block;
 static u32 cpu0_pwr_zone_ctrl_reg;
 static u32 cpu_rst_cfg_reg;
 static u32 hif_cont_reg;

 #ifdef CONFIG_HOTPLUG_CPU
 /*
  * We must quiesce a dying CPU before it can be killed by the boot CPU. Because
  * one or more cache may be disabled, we must flush to ensure coherency. We
  * cannot use traditionl completion structures or spinlocks as they rely on
  * coherency.
  */
 static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);

 static int per_cpu_sw_state_rd(u32 cpu)
 {
 	sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
 	return per_cpu(per_cpu_sw_state, cpu);
 }

 static void per_cpu_sw_state_wr(u32 cpu, int val)
 {
 	dmb();
 	per_cpu(per_cpu_sw_state, cpu) = val;
 	sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
 }
 #else
 static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
 #endif

 static void __iomem *pwr_ctrl_get_base(u32 cpu)
 {
 	void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
 	base += (cpu_logical_map(cpu) * 4);
 	return base;
 }

 static u32 pwr_ctrl_rd(u32 cpu)
 {
 	void __iomem *base = pwr_ctrl_get_base(cpu);
 	return readl_relaxed(base);
 }

 static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask)
 {
 	void __iomem *base = pwr_ctrl_get_base(cpu);
 	writel((readl(base) & mask) | val, base);
 }

 static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask)
 {
 	void __iomem *base = pwr_ctrl_get_base(cpu);
 	writel((readl(base) & mask) & ~val, base);
 }

 #define POLL_TMOUT_MS 500
 static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask)
 {
 	const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS);
 	u32 tmp;

 	do {
 		tmp = pwr_ctrl_rd(cpu) & mask;
 		if (!set == !tmp)
 			return 0;
 	} while (time_before(jiffies, timeo));

 	tmp = pwr_ctrl_rd(cpu) & mask;
 	if (!set == !tmp)
 		return 0;

 	return -ETIMEDOUT;
 }

 static void cpu_rst_cfg_set(u32 cpu, int set)
 {
 	u32 val;
 	val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
 	if (set)
 		val |= BIT(cpu_logical_map(cpu));
 	else
 		val &= ~BIT(cpu_logical_map(cpu));
 	writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
 }

 static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
 {
 	const int reg_ofs = cpu_logical_map(cpu) * 8;
 	writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
 	writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
 }

 static void brcmstb_cpu_boot(u32 cpu)
 {
 	/* Mark this CPU as "up" */
 	per_cpu_sw_state_wr(cpu, 1);

 	/*
 	 * Set the reset vector to point to the secondary_startup
 	 * routine
 	 */
 	cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup));

 	/* Unhalt the cpu */
 	cpu_rst_cfg_set(cpu, 0);
 }

 static void brcmstb_cpu_power_on(u32 cpu)
 {
 	/*
 	 * The secondary cores power was cut, so we must go through
 	 * power-on initialization.
 	 */
 	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00);
 	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
 	pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1);

 	pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1);

 	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK))
 		panic("ZONE_MEM_PWR_STATE_MASK set timeout");

 	pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1);

 	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK))
 		panic("ZONE_DPG_PWR_STATE_MASK set timeout");

 	pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
 	pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
 }

 static int brcmstb_cpu_get_power_state(u32 cpu)
 {
 	int tmp = pwr_ctrl_rd(cpu);
 	return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
 }

 #ifdef CONFIG_HOTPLUG_CPU

 static void brcmstb_cpu_die(u32 cpu)
 {
 	v7_exit_coherency_flush(all);

 	per_cpu_sw_state_wr(cpu, 0);

 	/* Sit and wait to die */
 	wfi();

 	/* We should never get here... */
 	while (1)
 		;
 }

 static int brcmstb_cpu_kill(u32 cpu)
 {
 	/*
 	 * Ordinarily, the hardware forbids power-down of CPU0 (which is good
 	 * because it is the boot CPU), but this is not true when using BPCM
 	 * manual mode.  Consequently, we must avoid turning off CPU0 here to
 	 * ensure that TI2C master reset will work.
 	 */
 	if (cpu == 0) {
 		pr_warn("SMP: refusing to power off CPU0\n");
 		return 1;
 	}

 	while (per_cpu_sw_state_rd(cpu))
 		;

 	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
 	pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
 	pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1);
 	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
 	pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1);

 	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK))
 		panic("ZONE_MEM_PWR_STATE_MASK clear timeout");

 	pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1);

 	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK))
 		panic("ZONE_DPG_PWR_STATE_MASK clear timeout");

 	/* Flush pipeline before resetting CPU */
 	mb();

 	/* Assert reset on the CPU */
 	cpu_rst_cfg_set(cpu, 1);

 	return 1;
 }

 #endif /* CONFIG_HOTPLUG_CPU */

 static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
 {
 	int rc = 0;
 	char *name;
 	struct device_node *syscon_np = NULL;

 	name = "syscon-cpu";

 	syscon_np = of_parse_phandle(np, name, 0);
 	if (!syscon_np) {
 		pr_err("can't find phandle %s\n", name);
 		rc = -EINVAL;
 		goto cleanup;
 	}

 	cpubiuctrl_block = of_iomap(syscon_np, 0);
 	if (!cpubiuctrl_block) {
 		pr_err("iomap failed for cpubiuctrl_block\n");
 		rc = -EINVAL;
 		goto cleanup;
 	}

 	rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
 					&cpu0_pwr_zone_ctrl_reg);
 	if (rc) {
 		pr_err("failed to read 1st entry from %s property (%d)\n", name,
 			rc);
 		rc = -EINVAL;
 		goto cleanup;
 	}

 	rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
 					&cpu_rst_cfg_reg);
 	if (rc) {
 		pr_err("failed to read 2nd entry from %s property (%d)\n", name,
 			rc);
 		rc = -EINVAL;
 		goto cleanup;
 	}

 cleanup:
 	of_node_put(syscon_np);
 	return rc;
 }

 static int __init setup_hifcont_regs(struct device_node *np)
 {
 	int rc = 0;
 	char *name;
 	struct device_node *syscon_np = NULL;

 	name = "syscon-cont";

 	syscon_np = of_parse_phandle(np, name, 0);
 	if (!syscon_np) {
 		pr_err("can't find phandle %s\n", name);
 		rc = -EINVAL;
 		goto cleanup;
 	}

 	hif_cont_block = of_iomap(syscon_np, 0);
 	if (!hif_cont_block) {
 		pr_err("iomap failed for hif_cont_block\n");
 		rc = -EINVAL;
 		goto cleanup;
 	}

 	/* Offset is at top of hif_cont_block */
 	hif_cont_reg = 0;

 cleanup:
 	of_node_put(syscon_np);
 	return rc;
 }

 static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
 {
 	int rc;
 	struct device_node *np;
 	char *name;

 	name = "brcm,brcmstb-smpboot";
 	np = of_find_compatible_node(NULL, NULL, name);
 	if (!np) {
 		pr_err("can't find compatible node %s\n", name);
 		return;
 	}

 	rc = setup_hifcpubiuctrl_regs(np);
 	if (rc)
 		return;

 	rc = setup_hifcont_regs(np);
 	if (rc)
 		return;
 }

 static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	/* Missing the brcm,brcmstb-smpboot DT node? */
 	if (!cpubiuctrl_block || !hif_cont_block)
 		return -ENODEV;

 	/* Bring up power to the core if necessary */
 	if (brcmstb_cpu_get_power_state(cpu) == 0)
 		brcmstb_cpu_power_on(cpu);

 	brcmstb_cpu_boot(cpu);

 	return 0;
 }

 static struct smp_operations brcmstb_smp_ops __initdata = {
 	.smp_prepare_cpus	= brcmstb_cpu_ctrl_setup,
 	.smp_boot_secondary	= brcmstb_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_kill		= brcmstb_cpu_kill,
 	.cpu_die		= brcmstb_cpu_die,
 #endif
 };

 CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);
	/*
	* Broadcom STB CPU SMP and hotplug support for ARM
	*
	* Copyright (C) 2013-2014 Broadcom Corporation
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation version 2.
	*
	* This program is distributed "as is" WITHOUT ANY WARRANTY of any
	* kind, whether express or implied; without even the implied warranty
	* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*/

	#include <linux/delay.h>
	#include <linux/errno.h>
	#include <linux/init.h>
	#include <linux/io.h>
	#include <linux/jiffies.h>
	#include <linux/of_address.h>
	#include <linux/of_platform.h>
	#include <linux/printk.h>
	#include <linux/regmap.h>
	#include <linux/smp.h>
	#include <linux/mfd/syscon.h>

	#include <asm/cacheflush.h>
	#include <asm/cp15.h>
	#include <asm/mach-types.h>
	#include <asm/smp_plat.h>

	enum {
	ZONE_MAN_CLKEN_MASK = BIT(0),
	ZONE_MAN_RESET_CNTL_MASK = BIT(1),
	ZONE_MAN_MEM_PWR_MASK = BIT(4),
	ZONE_RESERVED_1_MASK = BIT(5),
	ZONE_MAN_ISO_CNTL_MASK = BIT(6),
	ZONE_MANUAL_CONTROL_MASK = BIT(7),
	ZONE_PWR_DN_REQ_MASK = BIT(9),
	ZONE_PWR_UP_REQ_MASK = BIT(10),
	ZONE_BLK_RST_ASSERT_MASK = BIT(12),
	ZONE_PWR_OFF_STATE_MASK = BIT(25),
	ZONE_PWR_ON_STATE_MASK = BIT(26),
	ZONE_DPG_PWR_STATE_MASK = BIT(28),
	ZONE_MEM_PWR_STATE_MASK = BIT(29),
	ZONE_RESET_STATE_MASK = BIT(31),
	CPU0_PWR_ZONE_CTRL_REG = 1,
	CPU_RESET_CONFIG_REG = 2,
	};

	static void __iomem *cpubiuctrl_block;
	static void __iomem *hif_cont_block;
	static u32 cpu0_pwr_zone_ctrl_reg;
	static u32 cpu_rst_cfg_reg;
	static u32 hif_cont_reg;

	#ifdef CONFIG_HOTPLUG_CPU
	/*
	* We must quiesce a dying CPU before it can be killed by the boot CPU. Because
	* one or more cache may be disabled, we must flush to ensure coherency. We
	* cannot use traditionl completion structures or spinlocks as they rely on
	* coherency.
	*/
	static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);

	static int per_cpu_sw_state_rd(u32 cpu)
	{
	sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
	return per_cpu(per_cpu_sw_state, cpu);
	}

	static void per_cpu_sw_state_wr(u32 cpu, int val)
	{
	dmb();
	per_cpu(per_cpu_sw_state, cpu) = val;
	sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
	}
	#else
	static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
	#endif

	static void __iomem *pwr_ctrl_get_base(u32 cpu)
	{
	void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
	base += (cpu_logical_map(cpu) * 4);
	return base;
	}

	static u32 pwr_ctrl_rd(u32 cpu)
	{
	void __iomem *base = pwr_ctrl_get_base(cpu);
	return readl_relaxed(base);
	}

	static void pwr_ctrl_set(unsigned int cpu, u32 val, u32 mask)
	{
	void __iomem *base = pwr_ctrl_get_base(cpu);
	writel((readl(base) & mask) \| val, base);
	}

	static void pwr_ctrl_clr(unsigned int cpu, u32 val, u32 mask)
	{
	void __iomem *base = pwr_ctrl_get_base(cpu);
	writel((readl(base) & mask) & ~val, base);
	}

	#define POLL_TMOUT_MS 500
	static int pwr_ctrl_wait_tmout(unsigned int cpu, u32 set, u32 mask)
	{
	const unsigned long timeo = jiffies + msecs_to_jiffies(POLL_TMOUT_MS);
	u32 tmp;

	do {
	tmp = pwr_ctrl_rd(cpu) & mask;
	if (!set == !tmp)
	return 0;
	} while (time_before(jiffies, timeo));

	tmp = pwr_ctrl_rd(cpu) & mask;
	if (!set == !tmp)
	return 0;

	return -ETIMEDOUT;
	}

	static void cpu_rst_cfg_set(u32 cpu, int set)
	{
	u32 val;
	val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
	if (set)
	val \|= BIT(cpu_logical_map(cpu));
	else
	val &= ~BIT(cpu_logical_map(cpu));
	writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
	}

	static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
	{
	const int reg_ofs = cpu_logical_map(cpu) * 8;
	writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
	writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
	}

	static void brcmstb_cpu_boot(u32 cpu)
	{
	/* Mark this CPU as "up" */
	per_cpu_sw_state_wr(cpu, 1);

	/*
	* Set the reset vector to point to the secondary_startup
	* routine
	*/
	cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup));

	/* Unhalt the cpu */
	cpu_rst_cfg_set(cpu, 0);
	}

	static void brcmstb_cpu_power_on(u32 cpu)
	{
	/*
	* The secondary cores power was cut, so we must go through
	* power-on initialization.
	*/
	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, 0xffffff00);
	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
	pwr_ctrl_set(cpu, ZONE_RESERVED_1_MASK, -1);

	pwr_ctrl_set(cpu, ZONE_MAN_MEM_PWR_MASK, -1);

	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_MEM_PWR_STATE_MASK))
	panic("ZONE_MEM_PWR_STATE_MASK set timeout");

	pwr_ctrl_set(cpu, ZONE_MAN_CLKEN_MASK, -1);

	if (pwr_ctrl_wait_tmout(cpu, 1, ZONE_DPG_PWR_STATE_MASK))
	panic("ZONE_DPG_PWR_STATE_MASK set timeout");

	pwr_ctrl_clr(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
	pwr_ctrl_set(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
	}

	static int brcmstb_cpu_get_power_state(u32 cpu)
	{
	int tmp = pwr_ctrl_rd(cpu);
	return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
	}

	#ifdef CONFIG_HOTPLUG_CPU

	static void brcmstb_cpu_die(u32 cpu)
	{
	v7_exit_coherency_flush(all);

	per_cpu_sw_state_wr(cpu, 0);

	/* Sit and wait to die */
	wfi();

	/* We should never get here... */
	while (1)
	;
	}

	static int brcmstb_cpu_kill(u32 cpu)
	{
	/*
	* Ordinarily, the hardware forbids power-down of CPU0 (which is good
	* because it is the boot CPU), but this is not true when using BPCM
	* manual mode. Consequently, we must avoid turning off CPU0 here to
	* ensure that TI2C master reset will work.
	*/
	if (cpu == 0) {
	pr_warn("SMP: refusing to power off CPU0\n");
	return 1;
	}

	while (per_cpu_sw_state_rd(cpu))
	;

	pwr_ctrl_set(cpu, ZONE_MANUAL_CONTROL_MASK, -1);
	pwr_ctrl_clr(cpu, ZONE_MAN_RESET_CNTL_MASK, -1);
	pwr_ctrl_clr(cpu, ZONE_MAN_CLKEN_MASK, -1);
	pwr_ctrl_set(cpu, ZONE_MAN_ISO_CNTL_MASK, -1);
	pwr_ctrl_clr(cpu, ZONE_MAN_MEM_PWR_MASK, -1);

	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_MEM_PWR_STATE_MASK))
	panic("ZONE_MEM_PWR_STATE_MASK clear timeout");

	pwr_ctrl_clr(cpu, ZONE_RESERVED_1_MASK, -1);

	if (pwr_ctrl_wait_tmout(cpu, 0, ZONE_DPG_PWR_STATE_MASK))
	panic("ZONE_DPG_PWR_STATE_MASK clear timeout");

	/* Flush pipeline before resetting CPU */
	mb();

	/* Assert reset on the CPU */
	cpu_rst_cfg_set(cpu, 1);

	return 1;
	}

	#endif /* CONFIG_HOTPLUG_CPU */

	static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
	{
	int rc = 0;
	char *name;
	struct device_node *syscon_np = NULL;

	name = "syscon-cpu";

	syscon_np = of_parse_phandle(np, name, 0);
	if (!syscon_np) {
	pr_err("can't find phandle %s\n", name);
	rc = -EINVAL;
	goto cleanup;
	}

	cpubiuctrl_block = of_iomap(syscon_np, 0);
	if (!cpubiuctrl_block) {
	pr_err("iomap failed for cpubiuctrl_block\n");
	rc = -EINVAL;
	goto cleanup;
	}

	rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
	&cpu0_pwr_zone_ctrl_reg);
	if (rc) {
	pr_err("failed to read 1st entry from %s property (%d)\n", name,
	rc);
	rc = -EINVAL;
	goto cleanup;
	}

	rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
	&cpu_rst_cfg_reg);
	if (rc) {
	pr_err("failed to read 2nd entry from %s property (%d)\n", name,
	rc);
	rc = -EINVAL;
	goto cleanup;
	}

	cleanup:
	of_node_put(syscon_np);
	return rc;
	}

	static int __init setup_hifcont_regs(struct device_node *np)
	{
	int rc = 0;
	char *name;
	struct device_node *syscon_np = NULL;

	name = "syscon-cont";

	syscon_np = of_parse_phandle(np, name, 0);
	if (!syscon_np) {
	pr_err("can't find phandle %s\n", name);
	rc = -EINVAL;
	goto cleanup;
	}

	hif_cont_block = of_iomap(syscon_np, 0);
	if (!hif_cont_block) {
	pr_err("iomap failed for hif_cont_block\n");
	rc = -EINVAL;
	goto cleanup;
	}

	/* Offset is at top of hif_cont_block */
	hif_cont_reg = 0;

	cleanup:
	of_node_put(syscon_np);
	return rc;
	}

	static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
	{
	int rc;
	struct device_node *np;
	char *name;

	name = "brcm,brcmstb-smpboot";
	np = of_find_compatible_node(NULL, NULL, name);
	if (!np) {
	pr_err("can't find compatible node %s\n", name);
	return;
	}

	rc = setup_hifcpubiuctrl_regs(np);
	if (rc)
	return;

	rc = setup_hifcont_regs(np);
	if (rc)
	return;
	}

	static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
	{
	/* Missing the brcm,brcmstb-smpboot DT node? */
	if (!cpubiuctrl_block \|\| !hif_cont_block)
	return -ENODEV;

	/* Bring up power to the core if necessary */
	if (brcmstb_cpu_get_power_state(cpu) == 0)
	brcmstb_cpu_power_on(cpu);

	brcmstb_cpu_boot(cpu);

	return 0;
	}

	static struct smp_operations brcmstb_smp_ops __initdata = {
	.smp_prepare_cpus = brcmstb_cpu_ctrl_setup,
	.smp_boot_secondary = brcmstb_boot_secondary,
	#ifdef CONFIG_HOTPLUG_CPU
	.cpu_kill = brcmstb_cpu_kill,
	.cpu_die = brcmstb_cpu_die,
	#endif
	};

	CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);