| /* |
| * Freescale ASRC ALSA SoC Digital Audio Interface (DAI) driver |
| * |
| * Copyright (C) 2014 Freescale Semiconductor, Inc. |
| * |
| * Author: Nicolin Chen <nicoleotsuka@gmail.com> |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_data/dma-imx.h> |
| #include <linux/pm_runtime.h> |
| #include <sound/dmaengine_pcm.h> |
| #include <sound/pcm_params.h> |
| |
| #include "fsl_asrc.h" |
| |
| #define IDEAL_RATIO_DECIMAL_DEPTH 26 |
| |
| #define pair_err(fmt, ...) \ |
| dev_err(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__) |
| |
| #define pair_dbg(fmt, ...) \ |
| dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__) |
| |
| /* Sample rates are aligned with that defined in pcm.h file */ |
| static const u8 process_option[][8][2] = { |
| /* 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */ |
| {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */ |
| {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */ |
| {{0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */ |
| {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */ |
| {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */ |
| {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */ |
| {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */ |
| {{0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */ |
| {{1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */ |
| {{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */ |
| {{1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */ |
| {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */ |
| {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */ |
| }; |
| |
| /* Corresponding to process_option */ |
| static int supported_input_rate[] = { |
| 5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200, |
| 96000, 176400, 192000, |
| }; |
| |
| static int supported_asrc_rate[] = { |
| 32000, 44100, 48000, 64000, 88200, 96000, 176400, 192000, |
| }; |
| |
| /** |
| * The following tables map the relationship between asrc_inclk/asrc_outclk in |
| * fsl_asrc.h and the registers of ASRCSR |
| */ |
| static unsigned char input_clk_map_imx35[] = { |
| 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf, |
| }; |
| |
| static unsigned char output_clk_map_imx35[] = { |
| 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf, |
| }; |
| |
| /* i.MX53 uses the same map for input and output */ |
| static unsigned char input_clk_map_imx53[] = { |
| /* 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf */ |
| 0x0, 0x1, 0x2, 0x7, 0x4, 0x5, 0x6, 0x3, 0x8, 0x9, 0xa, 0xb, 0xc, 0xf, 0xe, 0xd, |
| }; |
| |
| static unsigned char output_clk_map_imx53[] = { |
| /* 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf */ |
| 0x8, 0x9, 0xa, 0x7, 0xc, 0x5, 0x6, 0xb, 0x0, 0x1, 0x2, 0x3, 0x4, 0xf, 0xe, 0xd, |
| }; |
| |
| static unsigned char *clk_map[2]; |
| |
| /** |
| * Request ASRC pair |
| * |
| * It assigns pair by the order of A->C->B because allocation of pair B, |
| * within range [ANCA, ANCA+ANCB-1], depends on the channels of pair A |
| * while pair A and pair C are comparatively independent. |
| */ |
| static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair) |
| { |
| enum asrc_pair_index index = ASRC_INVALID_PAIR; |
| struct fsl_asrc *asrc_priv = pair->asrc_priv; |
| struct device *dev = &asrc_priv->pdev->dev; |
| unsigned long lock_flags; |
| int i, ret = 0; |
| |
| spin_lock_irqsave(&asrc_priv->lock, lock_flags); |
| |
| for (i = ASRC_PAIR_A; i < ASRC_PAIR_MAX_NUM; i++) { |
| if (asrc_priv->pair[i] != NULL) |
| continue; |
| |
| index = i; |
| |
| if (i != ASRC_PAIR_B) |
| break; |
| } |
| |
| if (index == ASRC_INVALID_PAIR) { |
| dev_err(dev, "all pairs are busy now\n"); |
| ret = -EBUSY; |
| } else if (asrc_priv->channel_avail < channels) { |
| dev_err(dev, "can't afford required channels: %d\n", channels); |
| ret = -EINVAL; |
| } else { |
| asrc_priv->channel_avail -= channels; |
| asrc_priv->pair[index] = pair; |
| pair->channels = channels; |
| pair->index = index; |
| } |
| |
| spin_unlock_irqrestore(&asrc_priv->lock, lock_flags); |
| |
| return ret; |
| } |
| |
| /** |
| * Release ASRC pair |
| * |
| * It clears the resource from asrc_priv and releases the occupied channels. |
| */ |
| static void fsl_asrc_release_pair(struct fsl_asrc_pair *pair) |
| { |
| struct fsl_asrc *asrc_priv = pair->asrc_priv; |
| enum asrc_pair_index index = pair->index; |
| unsigned long lock_flags; |
| |
| /* Make sure the pair is disabled */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_ASRCEi_MASK(index), 0); |
| |
| spin_lock_irqsave(&asrc_priv->lock, lock_flags); |
| |
| asrc_priv->channel_avail += pair->channels; |
| asrc_priv->pair[index] = NULL; |
| pair->error = 0; |
| |
| spin_unlock_irqrestore(&asrc_priv->lock, lock_flags); |
| } |
| |
| /** |
| * Configure input and output thresholds |
| */ |
| static void fsl_asrc_set_watermarks(struct fsl_asrc_pair *pair, u32 in, u32 out) |
| { |
| struct fsl_asrc *asrc_priv = pair->asrc_priv; |
| enum asrc_pair_index index = pair->index; |
| |
| regmap_update_bits(asrc_priv->regmap, REG_ASRMCR(index), |
| ASRMCRi_EXTTHRSHi_MASK | |
| ASRMCRi_INFIFO_THRESHOLD_MASK | |
| ASRMCRi_OUTFIFO_THRESHOLD_MASK, |
| ASRMCRi_EXTTHRSHi | |
| ASRMCRi_INFIFO_THRESHOLD(in) | |
| ASRMCRi_OUTFIFO_THRESHOLD(out)); |
| } |
| |
| /** |
| * Calculate the total divisor between asrck clock rate and sample rate |
| * |
| * It follows the formula clk_rate = samplerate * (2 ^ prescaler) * divider |
| */ |
| static u32 fsl_asrc_cal_asrck_divisor(struct fsl_asrc_pair *pair, u32 div) |
| { |
| u32 ps; |
| |
| /* Calculate the divisors: prescaler [2^0, 2^7], divder [1, 8] */ |
| for (ps = 0; div > 8; ps++) |
| div >>= 1; |
| |
| return ((div - 1) << ASRCDRi_AxCPi_WIDTH) | ps; |
| } |
| |
| /** |
| * Calculate and set the ratio for Ideal Ratio mode only |
| * |
| * The ratio is a 32-bit fixed point value with 26 fractional bits. |
| */ |
| static int fsl_asrc_set_ideal_ratio(struct fsl_asrc_pair *pair, |
| int inrate, int outrate) |
| { |
| struct fsl_asrc *asrc_priv = pair->asrc_priv; |
| enum asrc_pair_index index = pair->index; |
| unsigned long ratio; |
| int i; |
| |
| if (!outrate) { |
| pair_err("output rate should not be zero\n"); |
| return -EINVAL; |
| } |
| |
| /* Calculate the intergal part of the ratio */ |
| ratio = (inrate / outrate) << IDEAL_RATIO_DECIMAL_DEPTH; |
| |
| /* ... and then the 26 depth decimal part */ |
| inrate %= outrate; |
| |
| for (i = 1; i <= IDEAL_RATIO_DECIMAL_DEPTH; i++) { |
| inrate <<= 1; |
| |
| if (inrate < outrate) |
| continue; |
| |
| ratio |= 1 << (IDEAL_RATIO_DECIMAL_DEPTH - i); |
| inrate -= outrate; |
| |
| if (!inrate) |
| break; |
| } |
| |
| regmap_write(asrc_priv->regmap, REG_ASRIDRL(index), ratio); |
| regmap_write(asrc_priv->regmap, REG_ASRIDRH(index), ratio >> 24); |
| |
| return 0; |
| } |
| |
| /** |
| * Configure the assigned ASRC pair |
| * |
| * It configures those ASRC registers according to a configuration instance |
| * of struct asrc_config which includes in/output sample rate, width, channel |
| * and clock settings. |
| */ |
| static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair) |
| { |
| struct asrc_config *config = pair->config; |
| struct fsl_asrc *asrc_priv = pair->asrc_priv; |
| enum asrc_pair_index index = pair->index; |
| u32 inrate, outrate, indiv, outdiv; |
| u32 clk_index[2], div[2]; |
| int in, out, channels; |
| struct clk *clk; |
| bool ideal; |
| |
| if (!config) { |
| pair_err("invalid pair config\n"); |
| return -EINVAL; |
| } |
| |
| /* Validate channels */ |
| if (config->channel_num < 1 || config->channel_num > 10) { |
| pair_err("does not support %d channels\n", config->channel_num); |
| return -EINVAL; |
| } |
| |
| /* Validate output width */ |
| if (config->output_word_width == ASRC_WIDTH_8_BIT) { |
| pair_err("does not support 8bit width output\n"); |
| return -EINVAL; |
| } |
| |
| inrate = config->input_sample_rate; |
| outrate = config->output_sample_rate; |
| ideal = config->inclk == INCLK_NONE; |
| |
| /* Validate input and output sample rates */ |
| for (in = 0; in < ARRAY_SIZE(supported_input_rate); in++) |
| if (inrate == supported_input_rate[in]) |
| break; |
| |
| if (in == ARRAY_SIZE(supported_input_rate)) { |
| pair_err("unsupported input sample rate: %dHz\n", inrate); |
| return -EINVAL; |
| } |
| |
| for (out = 0; out < ARRAY_SIZE(supported_asrc_rate); out++) |
| if (outrate == supported_asrc_rate[out]) |
| break; |
| |
| if (out == ARRAY_SIZE(supported_asrc_rate)) { |
| pair_err("unsupported output sample rate: %dHz\n", outrate); |
| return -EINVAL; |
| } |
| |
| /* Validate input and output clock sources */ |
| clk_index[IN] = clk_map[IN][config->inclk]; |
| clk_index[OUT] = clk_map[OUT][config->outclk]; |
| |
| /* We only have output clock for ideal ratio mode */ |
| clk = asrc_priv->asrck_clk[clk_index[ideal ? OUT : IN]]; |
| |
| div[IN] = clk_get_rate(clk) / inrate; |
| if (div[IN] == 0) { |
| pair_err("failed to support input sample rate %dHz by asrck_%x\n", |
| inrate, clk_index[ideal ? OUT : IN]); |
| return -EINVAL; |
| } |
| |
| clk = asrc_priv->asrck_clk[clk_index[OUT]]; |
| |
| /* Use fixed output rate for Ideal Ratio mode (INCLK_NONE) */ |
| if (ideal) |
| div[OUT] = clk_get_rate(clk) / IDEAL_RATIO_RATE; |
| else |
| div[OUT] = clk_get_rate(clk) / outrate; |
| |
| if (div[OUT] == 0) { |
| pair_err("failed to support output sample rate %dHz by asrck_%x\n", |
| outrate, clk_index[OUT]); |
| return -EINVAL; |
| } |
| |
| /* Set the channel number */ |
| channels = config->channel_num; |
| |
| if (asrc_priv->channel_bits < 4) |
| channels /= 2; |
| |
| /* Update channels for current pair */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCNCR, |
| ASRCNCR_ANCi_MASK(index, asrc_priv->channel_bits), |
| ASRCNCR_ANCi(index, channels, asrc_priv->channel_bits)); |
| |
| /* Default setting: Automatic selection for processing mode */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_ATSi_MASK(index), ASRCTR_ATS(index)); |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_USRi_MASK(index), 0); |
| |
| /* Set the input and output clock sources */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCSR, |
| ASRCSR_AICSi_MASK(index) | ASRCSR_AOCSi_MASK(index), |
| ASRCSR_AICS(index, clk_index[IN]) | |
| ASRCSR_AOCS(index, clk_index[OUT])); |
| |
| /* Calculate the input clock divisors */ |
| indiv = fsl_asrc_cal_asrck_divisor(pair, div[IN]); |
| outdiv = fsl_asrc_cal_asrck_divisor(pair, div[OUT]); |
| |
| /* Suppose indiv and outdiv includes prescaler, so add its MASK too */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCDR(index), |
| ASRCDRi_AOCPi_MASK(index) | ASRCDRi_AICPi_MASK(index) | |
| ASRCDRi_AOCDi_MASK(index) | ASRCDRi_AICDi_MASK(index), |
| ASRCDRi_AOCP(index, outdiv) | ASRCDRi_AICP(index, indiv)); |
| |
| /* Implement word_width configurations */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRMCR1(index), |
| ASRMCR1i_OW16_MASK | ASRMCR1i_IWD_MASK, |
| ASRMCR1i_OW16(config->output_word_width) | |
| ASRMCR1i_IWD(config->input_word_width)); |
| |
| /* Enable BUFFER STALL */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRMCR(index), |
| ASRMCRi_BUFSTALLi_MASK, ASRMCRi_BUFSTALLi); |
| |
| /* Set default thresholds for input and output FIFO */ |
| fsl_asrc_set_watermarks(pair, ASRC_INPUTFIFO_THRESHOLD, |
| ASRC_INPUTFIFO_THRESHOLD); |
| |
| /* Configure the followings only for Ideal Ratio mode */ |
| if (!ideal) |
| return 0; |
| |
| /* Clear ASTSx bit to use Ideal Ratio mode */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_ATSi_MASK(index), 0); |
| |
| /* Enable Ideal Ratio mode */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_IDRi_MASK(index) | ASRCTR_USRi_MASK(index), |
| ASRCTR_IDR(index) | ASRCTR_USR(index)); |
| |
| /* Apply configurations for pre- and post-processing */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCFG, |
| ASRCFG_PREMODi_MASK(index) | ASRCFG_POSTMODi_MASK(index), |
| ASRCFG_PREMOD(index, process_option[in][out][0]) | |
| ASRCFG_POSTMOD(index, process_option[in][out][1])); |
| |
| return fsl_asrc_set_ideal_ratio(pair, inrate, outrate); |
| } |
| |
| /** |
| * Start the assigned ASRC pair |
| * |
| * It enables the assigned pair and makes it stopped at the stall level. |
| */ |
| static void fsl_asrc_start_pair(struct fsl_asrc_pair *pair) |
| { |
| struct fsl_asrc *asrc_priv = pair->asrc_priv; |
| enum asrc_pair_index index = pair->index; |
| int reg, retry = 10, i; |
| |
| /* Enable the current pair */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_ASRCEi_MASK(index), ASRCTR_ASRCE(index)); |
| |
| /* Wait for status of initialization */ |
| do { |
| udelay(5); |
| regmap_read(asrc_priv->regmap, REG_ASRCFG, ®); |
| reg &= ASRCFG_INIRQi_MASK(index); |
| } while (!reg && --retry); |
| |
| /* Make the input fifo to ASRC STALL level */ |
| regmap_read(asrc_priv->regmap, REG_ASRCNCR, ®); |
| for (i = 0; i < pair->channels * 4; i++) |
| regmap_write(asrc_priv->regmap, REG_ASRDI(index), 0); |
| |
| /* Enable overload interrupt */ |
| regmap_write(asrc_priv->regmap, REG_ASRIER, ASRIER_AOLIE); |
| } |
| |
| /** |
| * Stop the assigned ASRC pair |
| */ |
| static void fsl_asrc_stop_pair(struct fsl_asrc_pair *pair) |
| { |
| struct fsl_asrc *asrc_priv = pair->asrc_priv; |
| enum asrc_pair_index index = pair->index; |
| |
| /* Stop the current pair */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_ASRCEi_MASK(index), 0); |
| } |
| |
| /** |
| * Get DMA channel according to the pair and direction. |
| */ |
| struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir) |
| { |
| struct fsl_asrc *asrc_priv = pair->asrc_priv; |
| enum asrc_pair_index index = pair->index; |
| char name[4]; |
| |
| sprintf(name, "%cx%c", dir == IN ? 'r' : 't', index + 'a'); |
| |
| return dma_request_slave_channel(&asrc_priv->pdev->dev, name); |
| } |
| EXPORT_SYMBOL_GPL(fsl_asrc_get_dma_channel); |
| |
| static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai); |
| int width = snd_pcm_format_width(params_format(params)); |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct fsl_asrc_pair *pair = runtime->private_data; |
| unsigned int channels = params_channels(params); |
| unsigned int rate = params_rate(params); |
| struct asrc_config config; |
| int word_width, ret; |
| |
| ret = fsl_asrc_request_pair(channels, pair); |
| if (ret) { |
| dev_err(dai->dev, "fail to request asrc pair\n"); |
| return ret; |
| } |
| |
| pair->config = &config; |
| |
| if (width == 16) |
| width = ASRC_WIDTH_16_BIT; |
| else |
| width = ASRC_WIDTH_24_BIT; |
| |
| if (asrc_priv->asrc_width == 16) |
| word_width = ASRC_WIDTH_16_BIT; |
| else |
| word_width = ASRC_WIDTH_24_BIT; |
| |
| config.pair = pair->index; |
| config.channel_num = channels; |
| config.inclk = INCLK_NONE; |
| config.outclk = OUTCLK_ASRCK1_CLK; |
| |
| if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { |
| config.input_word_width = width; |
| config.output_word_width = word_width; |
| config.input_sample_rate = rate; |
| config.output_sample_rate = asrc_priv->asrc_rate; |
| } else { |
| config.input_word_width = word_width; |
| config.output_word_width = width; |
| config.input_sample_rate = asrc_priv->asrc_rate; |
| config.output_sample_rate = rate; |
| } |
| |
| ret = fsl_asrc_config_pair(pair); |
| if (ret) { |
| dev_err(dai->dev, "fail to config asrc pair\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fsl_asrc_dai_hw_free(struct snd_pcm_substream *substream, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct fsl_asrc_pair *pair = runtime->private_data; |
| |
| if (pair) |
| fsl_asrc_release_pair(pair); |
| |
| return 0; |
| } |
| |
| static int fsl_asrc_dai_trigger(struct snd_pcm_substream *substream, int cmd, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_pcm_runtime *runtime = substream->runtime; |
| struct fsl_asrc_pair *pair = runtime->private_data; |
| |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| fsl_asrc_start_pair(pair); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| fsl_asrc_stop_pair(pair); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static struct snd_soc_dai_ops fsl_asrc_dai_ops = { |
| .hw_params = fsl_asrc_dai_hw_params, |
| .hw_free = fsl_asrc_dai_hw_free, |
| .trigger = fsl_asrc_dai_trigger, |
| }; |
| |
| static int fsl_asrc_dai_probe(struct snd_soc_dai *dai) |
| { |
| struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai); |
| |
| snd_soc_dai_init_dma_data(dai, &asrc_priv->dma_params_tx, |
| &asrc_priv->dma_params_rx); |
| |
| return 0; |
| } |
| |
| #define FSL_ASRC_RATES SNDRV_PCM_RATE_8000_192000 |
| #define FSL_ASRC_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | \ |
| SNDRV_PCM_FMTBIT_S16_LE | \ |
| SNDRV_PCM_FMTBIT_S20_3LE) |
| |
| static struct snd_soc_dai_driver fsl_asrc_dai = { |
| .probe = fsl_asrc_dai_probe, |
| .playback = { |
| .stream_name = "ASRC-Playback", |
| .channels_min = 1, |
| .channels_max = 10, |
| .rates = FSL_ASRC_RATES, |
| .formats = FSL_ASRC_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "ASRC-Capture", |
| .channels_min = 1, |
| .channels_max = 10, |
| .rates = FSL_ASRC_RATES, |
| .formats = FSL_ASRC_FORMATS, |
| }, |
| .ops = &fsl_asrc_dai_ops, |
| }; |
| |
| static const struct snd_soc_component_driver fsl_asrc_component = { |
| .name = "fsl-asrc-dai", |
| }; |
| |
| static bool fsl_asrc_readable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_ASRCTR: |
| case REG_ASRIER: |
| case REG_ASRCNCR: |
| case REG_ASRCFG: |
| case REG_ASRCSR: |
| case REG_ASRCDR1: |
| case REG_ASRCDR2: |
| case REG_ASRSTR: |
| case REG_ASRPM1: |
| case REG_ASRPM2: |
| case REG_ASRPM3: |
| case REG_ASRPM4: |
| case REG_ASRPM5: |
| case REG_ASRTFR1: |
| case REG_ASRCCR: |
| case REG_ASRDOA: |
| case REG_ASRDOB: |
| case REG_ASRDOC: |
| case REG_ASRIDRHA: |
| case REG_ASRIDRLA: |
| case REG_ASRIDRHB: |
| case REG_ASRIDRLB: |
| case REG_ASRIDRHC: |
| case REG_ASRIDRLC: |
| case REG_ASR76K: |
| case REG_ASR56K: |
| case REG_ASRMCRA: |
| case REG_ASRFSTA: |
| case REG_ASRMCRB: |
| case REG_ASRFSTB: |
| case REG_ASRMCRC: |
| case REG_ASRFSTC: |
| case REG_ASRMCR1A: |
| case REG_ASRMCR1B: |
| case REG_ASRMCR1C: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool fsl_asrc_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_ASRSTR: |
| case REG_ASRDIA: |
| case REG_ASRDIB: |
| case REG_ASRDIC: |
| case REG_ASRDOA: |
| case REG_ASRDOB: |
| case REG_ASRDOC: |
| case REG_ASRFSTA: |
| case REG_ASRFSTB: |
| case REG_ASRFSTC: |
| case REG_ASRCFG: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static bool fsl_asrc_writeable_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case REG_ASRCTR: |
| case REG_ASRIER: |
| case REG_ASRCNCR: |
| case REG_ASRCFG: |
| case REG_ASRCSR: |
| case REG_ASRCDR1: |
| case REG_ASRCDR2: |
| case REG_ASRSTR: |
| case REG_ASRPM1: |
| case REG_ASRPM2: |
| case REG_ASRPM3: |
| case REG_ASRPM4: |
| case REG_ASRPM5: |
| case REG_ASRTFR1: |
| case REG_ASRCCR: |
| case REG_ASRDIA: |
| case REG_ASRDIB: |
| case REG_ASRDIC: |
| case REG_ASRIDRHA: |
| case REG_ASRIDRLA: |
| case REG_ASRIDRHB: |
| case REG_ASRIDRLB: |
| case REG_ASRIDRHC: |
| case REG_ASRIDRLC: |
| case REG_ASR76K: |
| case REG_ASR56K: |
| case REG_ASRMCRA: |
| case REG_ASRMCRB: |
| case REG_ASRMCRC: |
| case REG_ASRMCR1A: |
| case REG_ASRMCR1B: |
| case REG_ASRMCR1C: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static struct reg_default fsl_asrc_reg[] = { |
| { REG_ASRCTR, 0x0000 }, { REG_ASRIER, 0x0000 }, |
| { REG_ASRCNCR, 0x0000 }, { REG_ASRCFG, 0x0000 }, |
| { REG_ASRCSR, 0x0000 }, { REG_ASRCDR1, 0x0000 }, |
| { REG_ASRCDR2, 0x0000 }, { REG_ASRSTR, 0x0000 }, |
| { REG_ASRRA, 0x0000 }, { REG_ASRRB, 0x0000 }, |
| { REG_ASRRC, 0x0000 }, { REG_ASRPM1, 0x0000 }, |
| { REG_ASRPM2, 0x0000 }, { REG_ASRPM3, 0x0000 }, |
| { REG_ASRPM4, 0x0000 }, { REG_ASRPM5, 0x0000 }, |
| { REG_ASRTFR1, 0x0000 }, { REG_ASRCCR, 0x0000 }, |
| { REG_ASRDIA, 0x0000 }, { REG_ASRDOA, 0x0000 }, |
| { REG_ASRDIB, 0x0000 }, { REG_ASRDOB, 0x0000 }, |
| { REG_ASRDIC, 0x0000 }, { REG_ASRDOC, 0x0000 }, |
| { REG_ASRIDRHA, 0x0000 }, { REG_ASRIDRLA, 0x0000 }, |
| { REG_ASRIDRHB, 0x0000 }, { REG_ASRIDRLB, 0x0000 }, |
| { REG_ASRIDRHC, 0x0000 }, { REG_ASRIDRLC, 0x0000 }, |
| { REG_ASR76K, 0x0A47 }, { REG_ASR56K, 0x0DF3 }, |
| { REG_ASRMCRA, 0x0000 }, { REG_ASRFSTA, 0x0000 }, |
| { REG_ASRMCRB, 0x0000 }, { REG_ASRFSTB, 0x0000 }, |
| { REG_ASRMCRC, 0x0000 }, { REG_ASRFSTC, 0x0000 }, |
| { REG_ASRMCR1A, 0x0000 }, { REG_ASRMCR1B, 0x0000 }, |
| { REG_ASRMCR1C, 0x0000 }, |
| }; |
| |
| static const struct regmap_config fsl_asrc_regmap_config = { |
| .reg_bits = 32, |
| .reg_stride = 4, |
| .val_bits = 32, |
| |
| .max_register = REG_ASRMCR1C, |
| .reg_defaults = fsl_asrc_reg, |
| .num_reg_defaults = ARRAY_SIZE(fsl_asrc_reg), |
| .readable_reg = fsl_asrc_readable_reg, |
| .volatile_reg = fsl_asrc_volatile_reg, |
| .writeable_reg = fsl_asrc_writeable_reg, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| /** |
| * Initialize ASRC registers with a default configurations |
| */ |
| static int fsl_asrc_init(struct fsl_asrc *asrc_priv) |
| { |
| /* Halt ASRC internal FP when input FIFO needs data for pair A, B, C */ |
| regmap_write(asrc_priv->regmap, REG_ASRCTR, ASRCTR_ASRCEN); |
| |
| /* Disable interrupt by default */ |
| regmap_write(asrc_priv->regmap, REG_ASRIER, 0x0); |
| |
| /* Apply recommended settings for parameters from Reference Manual */ |
| regmap_write(asrc_priv->regmap, REG_ASRPM1, 0x7fffff); |
| regmap_write(asrc_priv->regmap, REG_ASRPM2, 0x255555); |
| regmap_write(asrc_priv->regmap, REG_ASRPM3, 0xff7280); |
| regmap_write(asrc_priv->regmap, REG_ASRPM4, 0xff7280); |
| regmap_write(asrc_priv->regmap, REG_ASRPM5, 0xff7280); |
| |
| /* Base address for task queue FIFO. Set to 0x7C */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRTFR1, |
| ASRTFR1_TF_BASE_MASK, ASRTFR1_TF_BASE(0xfc)); |
| |
| /* Set the processing clock for 76KHz to 133M */ |
| regmap_write(asrc_priv->regmap, REG_ASR76K, 0x06D6); |
| |
| /* Set the processing clock for 56KHz to 133M */ |
| return regmap_write(asrc_priv->regmap, REG_ASR56K, 0x0947); |
| } |
| |
| /** |
| * Interrupt handler for ASRC |
| */ |
| static irqreturn_t fsl_asrc_isr(int irq, void *dev_id) |
| { |
| struct fsl_asrc *asrc_priv = (struct fsl_asrc *)dev_id; |
| struct device *dev = &asrc_priv->pdev->dev; |
| enum asrc_pair_index index; |
| u32 status; |
| |
| regmap_read(asrc_priv->regmap, REG_ASRSTR, &status); |
| |
| /* Clean overload error */ |
| regmap_write(asrc_priv->regmap, REG_ASRSTR, ASRSTR_AOLE); |
| |
| /* |
| * We here use dev_dbg() for all exceptions because ASRC itself does |
| * not care if FIFO overflowed or underrun while a warning in the |
| * interrupt would result a ridged conversion. |
| */ |
| for (index = ASRC_PAIR_A; index < ASRC_PAIR_MAX_NUM; index++) { |
| if (!asrc_priv->pair[index]) |
| continue; |
| |
| if (status & ASRSTR_ATQOL) { |
| asrc_priv->pair[index]->error |= ASRC_TASK_Q_OVERLOAD; |
| dev_dbg(dev, "ASRC Task Queue FIFO overload\n"); |
| } |
| |
| if (status & ASRSTR_AOOL(index)) { |
| asrc_priv->pair[index]->error |= ASRC_OUTPUT_TASK_OVERLOAD; |
| pair_dbg("Output Task Overload\n"); |
| } |
| |
| if (status & ASRSTR_AIOL(index)) { |
| asrc_priv->pair[index]->error |= ASRC_INPUT_TASK_OVERLOAD; |
| pair_dbg("Input Task Overload\n"); |
| } |
| |
| if (status & ASRSTR_AODO(index)) { |
| asrc_priv->pair[index]->error |= ASRC_OUTPUT_BUFFER_OVERFLOW; |
| pair_dbg("Output Data Buffer has overflowed\n"); |
| } |
| |
| if (status & ASRSTR_AIDU(index)) { |
| asrc_priv->pair[index]->error |= ASRC_INPUT_BUFFER_UNDERRUN; |
| pair_dbg("Input Data Buffer has underflowed\n"); |
| } |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int fsl_asrc_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct fsl_asrc *asrc_priv; |
| struct resource *res; |
| void __iomem *regs; |
| int irq, ret, i; |
| char tmp[16]; |
| |
| asrc_priv = devm_kzalloc(&pdev->dev, sizeof(*asrc_priv), GFP_KERNEL); |
| if (!asrc_priv) |
| return -ENOMEM; |
| |
| asrc_priv->pdev = pdev; |
| strncpy(asrc_priv->name, np->name, sizeof(asrc_priv->name) - 1); |
| |
| /* Get the addresses and IRQ */ |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| regs = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(regs)) |
| return PTR_ERR(regs); |
| |
| asrc_priv->paddr = res->start; |
| |
| asrc_priv->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "mem", regs, |
| &fsl_asrc_regmap_config); |
| if (IS_ERR(asrc_priv->regmap)) { |
| dev_err(&pdev->dev, "failed to init regmap\n"); |
| return PTR_ERR(asrc_priv->regmap); |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| dev_err(&pdev->dev, "no irq for node %s\n", np->full_name); |
| return irq; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq, fsl_asrc_isr, 0, |
| asrc_priv->name, asrc_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to claim irq %u: %d\n", irq, ret); |
| return ret; |
| } |
| |
| asrc_priv->mem_clk = devm_clk_get(&pdev->dev, "mem"); |
| if (IS_ERR(asrc_priv->mem_clk)) { |
| dev_err(&pdev->dev, "failed to get mem clock\n"); |
| return PTR_ERR(asrc_priv->mem_clk); |
| } |
| |
| asrc_priv->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); |
| if (IS_ERR(asrc_priv->ipg_clk)) { |
| dev_err(&pdev->dev, "failed to get ipg clock\n"); |
| return PTR_ERR(asrc_priv->ipg_clk); |
| } |
| |
| for (i = 0; i < ASRC_CLK_MAX_NUM; i++) { |
| sprintf(tmp, "asrck_%x", i); |
| asrc_priv->asrck_clk[i] = devm_clk_get(&pdev->dev, tmp); |
| if (IS_ERR(asrc_priv->asrck_clk[i])) { |
| dev_err(&pdev->dev, "failed to get %s clock\n", tmp); |
| return PTR_ERR(asrc_priv->asrck_clk[i]); |
| } |
| } |
| |
| if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx35-asrc")) { |
| asrc_priv->channel_bits = 3; |
| clk_map[IN] = input_clk_map_imx35; |
| clk_map[OUT] = output_clk_map_imx35; |
| } else { |
| asrc_priv->channel_bits = 4; |
| clk_map[IN] = input_clk_map_imx53; |
| clk_map[OUT] = output_clk_map_imx53; |
| } |
| |
| ret = fsl_asrc_init(asrc_priv); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to init asrc %d\n", ret); |
| return -EINVAL; |
| } |
| |
| asrc_priv->channel_avail = 10; |
| |
| ret = of_property_read_u32(np, "fsl,asrc-rate", |
| &asrc_priv->asrc_rate); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to get output rate\n"); |
| return -EINVAL; |
| } |
| |
| ret = of_property_read_u32(np, "fsl,asrc-width", |
| &asrc_priv->asrc_width); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to get output width\n"); |
| return -EINVAL; |
| } |
| |
| if (asrc_priv->asrc_width != 16 && asrc_priv->asrc_width != 24) { |
| dev_warn(&pdev->dev, "unsupported width, switching to 24bit\n"); |
| asrc_priv->asrc_width = 24; |
| } |
| |
| platform_set_drvdata(pdev, asrc_priv); |
| pm_runtime_enable(&pdev->dev); |
| spin_lock_init(&asrc_priv->lock); |
| |
| ret = devm_snd_soc_register_component(&pdev->dev, &fsl_asrc_component, |
| &fsl_asrc_dai, 1); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register ASoC DAI\n"); |
| return ret; |
| } |
| |
| ret = devm_snd_soc_register_platform(&pdev->dev, &fsl_asrc_platform); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to register ASoC platform\n"); |
| return ret; |
| } |
| |
| dev_info(&pdev->dev, "driver registered\n"); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int fsl_asrc_runtime_resume(struct device *dev) |
| { |
| struct fsl_asrc *asrc_priv = dev_get_drvdata(dev); |
| int i; |
| |
| clk_prepare_enable(asrc_priv->mem_clk); |
| clk_prepare_enable(asrc_priv->ipg_clk); |
| for (i = 0; i < ASRC_CLK_MAX_NUM; i++) |
| clk_prepare_enable(asrc_priv->asrck_clk[i]); |
| |
| return 0; |
| } |
| |
| static int fsl_asrc_runtime_suspend(struct device *dev) |
| { |
| struct fsl_asrc *asrc_priv = dev_get_drvdata(dev); |
| int i; |
| |
| for (i = 0; i < ASRC_CLK_MAX_NUM; i++) |
| clk_disable_unprepare(asrc_priv->asrck_clk[i]); |
| clk_disable_unprepare(asrc_priv->ipg_clk); |
| clk_disable_unprepare(asrc_priv->mem_clk); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int fsl_asrc_suspend(struct device *dev) |
| { |
| struct fsl_asrc *asrc_priv = dev_get_drvdata(dev); |
| |
| regcache_cache_only(asrc_priv->regmap, true); |
| regcache_mark_dirty(asrc_priv->regmap); |
| |
| return 0; |
| } |
| |
| static int fsl_asrc_resume(struct device *dev) |
| { |
| struct fsl_asrc *asrc_priv = dev_get_drvdata(dev); |
| u32 asrctr; |
| |
| /* Stop all pairs provisionally */ |
| regmap_read(asrc_priv->regmap, REG_ASRCTR, &asrctr); |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_ASRCEi_ALL_MASK, 0); |
| |
| /* Restore all registers */ |
| regcache_cache_only(asrc_priv->regmap, false); |
| regcache_sync(asrc_priv->regmap); |
| |
| /* Restart enabled pairs */ |
| regmap_update_bits(asrc_priv->regmap, REG_ASRCTR, |
| ASRCTR_ASRCEi_ALL_MASK, asrctr); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static const struct dev_pm_ops fsl_asrc_pm = { |
| SET_RUNTIME_PM_OPS(fsl_asrc_runtime_suspend, fsl_asrc_runtime_resume, NULL) |
| SET_SYSTEM_SLEEP_PM_OPS(fsl_asrc_suspend, fsl_asrc_resume) |
| }; |
| |
| static const struct of_device_id fsl_asrc_ids[] = { |
| { .compatible = "fsl,imx35-asrc", }, |
| { .compatible = "fsl,imx53-asrc", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, fsl_asrc_ids); |
| |
| static struct platform_driver fsl_asrc_driver = { |
| .probe = fsl_asrc_probe, |
| .driver = { |
| .name = "fsl-asrc", |
| .of_match_table = fsl_asrc_ids, |
| .pm = &fsl_asrc_pm, |
| }, |
| }; |
| module_platform_driver(fsl_asrc_driver); |
| |
| MODULE_DESCRIPTION("Freescale ASRC ASoC driver"); |
| MODULE_AUTHOR("Nicolin Chen <nicoleotsuka@gmail.com>"); |
| MODULE_ALIAS("platform:fsl-asrc"); |
| MODULE_LICENSE("GPL v2"); |