| /* |
| * Copyright (C) 2009 Broadcom Corporation |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/sysfs.h> |
| #include <linux/device.h> |
| #include <linux/ctype.h> |
| #include <linux/platform_device.h> |
| |
| #ifdef CONFIG_MIPS |
| #include <asm/cpu-info.h> |
| #include <asm/r4kcache.h> |
| #include <asm/mipsregs.h> |
| #endif |
| |
| #include <linux/brcmstb/brcmstb.h> |
| |
| atomic_t brcm_unaligned_fp_count = ATOMIC_INIT(0); |
| atomic_t brcm_rdhwr_count = ATOMIC_INIT(0); |
| |
| static struct platform_device *brcmstb_pdev; |
| |
| static ssize_t show_unaligned_fp_count(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| atomic_read(&brcm_unaligned_fp_count)); |
| } |
| |
| static ssize_t show_rdhwr_count(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%d\n", |
| atomic_read(&brcm_rdhwr_count)); |
| } |
| |
| static ssize_t show_chip_id(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%04x\n", BRCM_CHIP_ID()); |
| } |
| |
| static ssize_t show_chip_rev(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%02X\n", BRCM_CHIP_REV() + 0xa0); |
| } |
| |
| static ssize_t show_bmem(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int idx = 0; |
| unsigned long addr = 0, size = 0; |
| const char *name = attr->attr.name; |
| |
| while (*name != 0) { |
| if (isdigit(*name)) { |
| idx = simple_strtoul(name, NULL, 10); |
| break; |
| } |
| name++; |
| } |
| bmem_region_info(idx, &addr, &size); |
| |
| return snprintf(buf, PAGE_SIZE, "0x%08lx 0x%08lx\n", addr, size); |
| } |
| |
| static ssize_t show_ocap_partition(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "0x%08lx 0x%08lx\n", |
| brcm_mtd_ocap_start, brcm_mtd_ocap_len); |
| } |
| |
| static ssize_t show_cfe_boardname(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%s\n", brcm_cfe_boardname); |
| } |
| |
| #ifdef CONFIG_MIPS |
| static ssize_t show_cache_max_writeback(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct brcm_cache_info info; |
| brcm_get_cache_info(&info); |
| return snprintf(buf, PAGE_SIZE, "%d\n", info.max_writeback); |
| } |
| |
| static ssize_t show_cache_max_writethrough(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct brcm_cache_info info; |
| brcm_get_cache_info(&info); |
| return snprintf(buf, PAGE_SIZE, "%d\n", info.max_writethrough); |
| } |
| |
| static ssize_t show_cache_prefetch_enabled(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct brcm_cache_info info; |
| brcm_get_cache_info(&info); |
| return snprintf(buf, PAGE_SIZE, "%d\n", info.prefetch_enabled); |
| } |
| |
| static ssize_t show_cpu_name(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%s\n", __cpu_name[0]); |
| } |
| |
| static ssize_t show_cp0_config_regs(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "0x%08x 0x%08x 0x%08x\n", |
| __read_32bit_c0_register($16, 0), |
| __read_32bit_c0_register($16, 1), |
| __read_32bit_c0_register($16, 7)); |
| } |
| |
| static inline ssize_t show_cp0_brcm_regs(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, |
| "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", |
| __read_32bit_c0_register($22, 0), |
| __read_32bit_c0_register($22, 1), |
| __read_32bit_c0_register($22, 2), |
| __read_32bit_c0_register($22, 3), |
| __read_32bit_c0_register($22, 4), |
| __read_32bit_c0_register($22, 5), |
| __read_32bit_c0_register($22, 6), |
| __read_32bit_c0_register($22, 7)); |
| } |
| |
| static ssize_t show_cpu_khz(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, "%ld\n", brcm_adj_cpu_khz); |
| } |
| #endif |
| |
| static inline ssize_t dump_core_regs(unsigned long cbr, |
| const int *regs, int n_regs, char *buf) |
| { |
| int i, bytes = 0; |
| |
| for (i = 0; i < n_regs; i++) |
| bytes += snprintf(&buf[bytes], PAGE_SIZE - bytes, "0x%08lx ", |
| DEV_RD(cbr + regs[i])); |
| buf[bytes - 1] = '\n'; |
| return bytes; |
| } |
| |
| #ifdef CONFIG_CPU_BMIPS3300 |
| static ssize_t show_bmips3300_core_regs(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const int regs[] = { BMIPS_RAC_CONFIG, BMIPS_RAC_ADDRESS_RANGE }; |
| |
| return dump_core_regs(__BMIPS_GET_CBR(), regs, ARRAY_SIZE(regs), buf); |
| } |
| #endif |
| |
| #ifdef CONFIG_CPU_BMIPS4380 |
| static ssize_t show_bmips4380_core_regs(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| const int regs[] = { |
| BMIPS_RAC_CONFIG, BMIPS_RAC_ADDRESS_RANGE, BMIPS_RAC_CONFIG_1, |
| BMIPS_L2_CONFIG, BMIPS_LMB_CONTROL, BMIPS_SYSTEM_BASE, |
| BMIPS_PERF_GLOBAL_CONTROL, BMIPS_PERF_CONTROL_0, |
| BMIPS_PERF_CONTROL_1, BMIPS_PERF_COUNTER_0, |
| BMIPS_PERF_COUNTER_1, BMIPS_PERF_COUNTER_2, |
| BMIPS_PERF_COUNTER_3, BMIPS_RELO_VECTOR_CONTROL_0, |
| BMIPS_RELO_VECTOR_CONTROL_1 }; |
| |
| return dump_core_regs(__BMIPS_GET_CBR(), regs, ARRAY_SIZE(regs), buf); |
| } |
| #endif |
| |
| /* Display secondary cache module settings */ |
| |
| #if defined(CONFIG_BRCM_ZSCM_L2) |
| |
| static ssize_t show_zscm_regs(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return snprintf(buf, PAGE_SIZE, |
| "0x%08lx 0x%08lx 0x%08lx 0x%08lx 0x%08lx " |
| "0x%08lx 0x%08lx 0x%08lx 0x%08lx 0x%08lx\n", |
| bmips_read_zscm_reg(0x00), bmips_read_zscm_reg(0x10), |
| bmips_read_zscm_reg(0x20), bmips_read_zscm_reg(0x30), |
| bmips_read_zscm_reg(0x40), bmips_read_zscm_reg(0x50), |
| bmips_read_zscm_reg(0x60), bmips_read_zscm_reg(0x70), |
| bmips_read_zscm_reg(0x80), bmips_read_zscm_reg(0x90)); |
| } |
| #endif |
| |
| static struct device_attribute brcmstb_attr_list[] = { |
| __ATTR(unaligned_fp_count, 0444, show_unaligned_fp_count, NULL), |
| __ATTR(rdhwr_count, 0444, show_rdhwr_count, NULL), |
| __ATTR(chip_id, 0444, show_chip_id, NULL), |
| __ATTR(chip_rev, 0444, show_chip_rev, NULL), |
| __ATTR(ocap_partition, 0444, show_ocap_partition, NULL), |
| __ATTR(cfe_boardname, 0444, show_cfe_boardname, NULL), |
| #if defined(CONFIG_MIPS) |
| __ATTR(cache_max_writeback, 0444, show_cache_max_writeback, NULL), |
| __ATTR(cache_max_writethrough, 0444, show_cache_max_writethrough, NULL), |
| __ATTR(cache_prefetch_enabled, 0444, show_cache_prefetch_enabled, NULL), |
| __ATTR(cpu_name, 0444, show_cpu_name, NULL), |
| __ATTR(cp0_config_regs, 0444, show_cp0_config_regs, NULL), |
| __ATTR(cpu_khz, 0444, show_cpu_khz, NULL), |
| #endif |
| #if defined(CONFIG_CPU_BMIPS3300) |
| __ATTR(cp0_brcm_regs, 0444, show_cp0_brcm_regs, NULL), |
| __ATTR(bmips3300_core_regs, 0444, show_bmips3300_core_regs, NULL), |
| #elif defined(CONFIG_CPU_BMIPS4380) |
| __ATTR(cp0_brcm_regs, 0444, show_cp0_brcm_regs, NULL), |
| __ATTR(bmips4380_core_regs, 0444, show_bmips4380_core_regs, NULL), |
| #elif defined(CONFIG_CPU_BMIPS5000) |
| __ATTR(cp0_brcm_regs, 0444, show_cp0_brcm_regs, NULL), |
| #endif |
| #if defined(CONFIG_BRCM_ZSCM_L2) |
| __ATTR(zscm_regs, 0444, show_zscm_regs, NULL), |
| #endif |
| #if defined(CONFIG_BRCM_CPU_DIV) |
| __ATTR(cpu_div, 0644, brcm_pm_show_cpu_div, brcm_pm_store_cpu_div), |
| #endif |
| #if defined(CONFIG_BRCM_CPU_PLL) |
| __ATTR(cpu_pll, 0644, brcm_pm_show_cpu_pll, brcm_pm_store_cpu_pll), |
| #endif |
| __ATTR(sata_power, 0644, brcm_pm_show_sata_power, |
| brcm_pm_store_sata_power), |
| __ATTR(ddr_timeout, 0644, brcm_pm_show_ddr_timeout, |
| brcm_pm_store_ddr_timeout), |
| __ATTR(standby_flags, 0644, brcm_pm_show_standby_flags, |
| brcm_pm_store_standby_flags), |
| __ATTR(standby_timeout, 0644, brcm_pm_show_standby_timeout, |
| brcm_pm_store_standby_timeout), |
| __ATTR(time_at_wakeup, 0444, brcm_pm_show_time_at_wakeup, NULL), |
| #if defined(CONFIG_BRCM_HAS_1GB_MEMC1) |
| __ATTR(memc1_power, 0644, brcm_pm_show_memc1_power, |
| brcm_pm_store_memc1_power), |
| #endif |
| __ATTR(halt_mode, 0644, brcm_pm_show_halt_mode, |
| brcm_pm_store_halt_mode), |
| __ATTR_NULL, |
| }; |
| |
| static int __init brcm_pdev_init(void) |
| { |
| struct device *dev; |
| int i; |
| struct device_attribute *attr; |
| |
| brcmstb_pdev = platform_device_alloc("brcmstb", -1); |
| if (brcmstb_pdev == NULL) { |
| printk(KERN_WARNING "%s: can't allocate device\n", |
| __func__); |
| return -ENODEV; |
| } |
| platform_device_add(brcmstb_pdev); |
| dev = &brcmstb_pdev->dev; |
| |
| for (attr = brcmstb_attr_list; attr->attr.name != NULL; attr++) |
| if (device_create_file(dev, attr) != 0) |
| WARN(1, "Can't create sysfs file\n"); |
| |
| /* create an attribute for each bmem region */ |
| for (i = 0; ; i++) { |
| unsigned long addr, size; |
| struct device_attribute *attr; |
| char *name; |
| |
| if (bmem_region_info(i, &addr, &size) < 0) |
| break; |
| attr = kzalloc(sizeof(*attr), GFP_KERNEL); |
| if (attr == NULL) |
| break; |
| |
| name = kzalloc(16, GFP_KERNEL); |
| if (name == NULL) |
| break; |
| snprintf(name, 16, "bmem.%d", i); |
| |
| sysfs_attr_init(&attr->attr); |
| attr->attr.name = name; |
| attr->attr.mode = 0444; |
| attr->show = show_bmem; |
| |
| if (device_create_file(dev, attr) != 0) |
| WARN(1, "Can't create sysfs file\n"); |
| } |
| |
| return 0; |
| } |
| |
| arch_initcall(brcm_pdev_init); |