| /* |
| * Copyright 2014 Hans de Goede <hdegoede@redhat.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public |
| * License along with this file; if not, write to the Free |
| * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| /include/ "sun6i-a31.dtsi" |
| /include/ "sunxi-common-regulators.dtsi" |
| |
| / { |
| model = "Mele M9 / A1000G Quad top set box"; |
| compatible = "mele,m9", "allwinner,sun6i-a31"; |
| |
| chosen { |
| bootargs = "earlyprintk console=ttyS0,115200"; |
| }; |
| |
| soc@01c00000 { |
| mmc0: mmc@01c0f000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; |
| vmmc-supply = <®_vcc3v3>; |
| bus-width = <4>; |
| cd-gpios = <&pio 7 22 0>; /* PH22 */ |
| cd-inverted; |
| status = "okay"; |
| }; |
| |
| usbphy: phy@01c19400 { |
| usb1_vbus-supply = <®_usb1_vbus>; |
| status = "okay"; |
| }; |
| |
| ehci0: usb@01c1a000 { |
| status = "okay"; |
| }; |
| |
| ehci1: usb@01c1b000 { |
| status = "okay"; |
| }; |
| |
| pio: pinctrl@01c20800 { |
| led_pins_m9: led_pins@0 { |
| allwinner,pins = "PH13"; |
| allwinner,function = "gpio_out"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| |
| mmc0_cd_pin_m9: mmc0_cd_pin@0 { |
| allwinner,pins = "PH22"; |
| allwinner,function = "gpio_in"; |
| allwinner,drive = <0>; |
| allwinner,pull = <1>; |
| }; |
| |
| usb1_vbus_pin_m9: usb1_vbus_pin@0 { |
| allwinner,pins = "PC27"; |
| allwinner,function = "gpio_out"; |
| allwinner,drive = <0>; |
| allwinner,pull = <0>; |
| }; |
| }; |
| |
| uart0: serial@01c28000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_pins_a>; |
| status = "okay"; |
| }; |
| |
| gmac: ethernet@01c30000 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gmac_pins_mii_a>; |
| phy = <&phy1>; |
| phy-mode = "mii"; |
| status = "okay"; |
| |
| phy1: ethernet-phy@1 { |
| reg = <1>; |
| }; |
| }; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&led_pins_m9>; |
| |
| blue { |
| label = "m9:blue:usr"; |
| gpios = <&pio 7 13 0>; |
| }; |
| }; |
| |
| reg_usb1_vbus: usb1-vbus { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&usb1_vbus_pin_m9>; |
| gpio = <&pio 2 27 0>; |
| status = "okay"; |
| }; |
| }; |