| * Renesas R-Car DMA Controller Device Tree bindings |
| |
| Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA |
| controller instances named DMAC capable of serving multiple clients. Channels |
| can be dedicated to specific clients or shared between a large number of |
| clients. |
| |
| DMA clients are connected to the DMAC ports referenced by an 8-bit identifier |
| called MID/RID. |
| |
| Each DMA client is connected to one dedicated port of the DMAC, identified by |
| an 8-bit port number called the MID/RID. A DMA controller can thus serve up to |
| 256 clients in total. When the number of hardware channels is lower than the |
| number of clients to be served, channels must be shared between multiple DMA |
| clients. The association of DMA clients to DMAC channels is fully dynamic and |
| not described in these device tree bindings. |
| |
| Required Properties: |
| |
| - compatible: must contain "renesas,rcar-dmac" |
| |
| - reg: base address and length of the registers block for the DMAC |
| |
| - interrupts: interrupt specifiers for the DMAC, one for each entry in |
| interrupt-names. |
| - interrupt-names: one entry per channel, named "ch%u", where %u is the |
| channel number ranging from zero to the number of channels minus one. |
| |
| - clock-names: "fck" for the functional clock |
| - clocks: a list of phandle + clock-specifier pairs, one for each entry |
| in clock-names. |
| - clock-names: must contain "fck" for the functional clock. |
| |
| - #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port |
| connected to the DMA client |
| - dma-channels: number of DMA channels |
| |
| Example: R8A7790 (R-Car H2) SYS-DMACs |
| |
| dmac0: dma-controller@e6700000 { |
| compatible = "renesas,rcar-dmac"; |
| reg = <0 0xe6700000 0 0x20000>; |
| interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH |
| 0 200 IRQ_TYPE_LEVEL_HIGH |
| 0 201 IRQ_TYPE_LEVEL_HIGH |
| 0 202 IRQ_TYPE_LEVEL_HIGH |
| 0 203 IRQ_TYPE_LEVEL_HIGH |
| 0 204 IRQ_TYPE_LEVEL_HIGH |
| 0 205 IRQ_TYPE_LEVEL_HIGH |
| 0 206 IRQ_TYPE_LEVEL_HIGH |
| 0 207 IRQ_TYPE_LEVEL_HIGH |
| 0 208 IRQ_TYPE_LEVEL_HIGH |
| 0 209 IRQ_TYPE_LEVEL_HIGH |
| 0 210 IRQ_TYPE_LEVEL_HIGH |
| 0 211 IRQ_TYPE_LEVEL_HIGH |
| 0 212 IRQ_TYPE_LEVEL_HIGH |
| 0 213 IRQ_TYPE_LEVEL_HIGH |
| 0 214 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "error", |
| "ch0", "ch1", "ch2", "ch3", |
| "ch4", "ch5", "ch6", "ch7", |
| "ch8", "ch9", "ch10", "ch11", |
| "ch12", "ch13", "ch14"; |
| clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; |
| clock-names = "fck"; |
| #dma-cells = <1>; |
| dma-channels = <15>; |
| }; |
| |
| dmac1: dma-controller@e6720000 { |
| compatible = "renesas,rcar-dmac"; |
| reg = <0 0xe6720000 0 0x20000>; |
| interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH |
| 0 216 IRQ_TYPE_LEVEL_HIGH |
| 0 217 IRQ_TYPE_LEVEL_HIGH |
| 0 218 IRQ_TYPE_LEVEL_HIGH |
| 0 219 IRQ_TYPE_LEVEL_HIGH |
| 0 308 IRQ_TYPE_LEVEL_HIGH |
| 0 309 IRQ_TYPE_LEVEL_HIGH |
| 0 310 IRQ_TYPE_LEVEL_HIGH |
| 0 311 IRQ_TYPE_LEVEL_HIGH |
| 0 312 IRQ_TYPE_LEVEL_HIGH |
| 0 313 IRQ_TYPE_LEVEL_HIGH |
| 0 314 IRQ_TYPE_LEVEL_HIGH |
| 0 315 IRQ_TYPE_LEVEL_HIGH |
| 0 316 IRQ_TYPE_LEVEL_HIGH |
| 0 317 IRQ_TYPE_LEVEL_HIGH |
| 0 318 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "error", |
| "ch0", "ch1", "ch2", "ch3", |
| "ch4", "ch5", "ch6", "ch7", |
| "ch8", "ch9", "ch10", "ch11", |
| "ch12", "ch13", "ch14"; |
| clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; |
| clock-names = "fck"; |
| #dma-cells = <1>; |
| dma-channels = <15>; |
| }; |