| /* |
| * Copyright (C) 2015 Imagination Technologies |
| * Author: Alex Smith <alex.smith@imgtec.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include "vdso.h" |
| |
| #include <linux/compiler.h> |
| #include <linux/irqchip/mips-gic.h> |
| #include <linux/time.h> |
| |
| #include <asm/clocksource.h> |
| #include <asm/io.h> |
| #include <asm/mips-cm.h> |
| #include <asm/unistd.h> |
| #include <asm/vdso.h> |
| |
| static __always_inline int do_realtime_coarse(struct timespec *ts, |
| const union mips_vdso_data *data) |
| { |
| u32 start_seq; |
| |
| do { |
| start_seq = vdso_data_read_begin(data); |
| |
| ts->tv_sec = data->xtime_sec; |
| ts->tv_nsec = data->xtime_nsec >> data->cs_shift; |
| } while (vdso_data_read_retry(data, start_seq)); |
| |
| return 0; |
| } |
| |
| static __always_inline int do_monotonic_coarse(struct timespec *ts, |
| const union mips_vdso_data *data) |
| { |
| u32 start_seq; |
| u32 to_mono_sec; |
| u32 to_mono_nsec; |
| |
| do { |
| start_seq = vdso_data_read_begin(data); |
| |
| ts->tv_sec = data->xtime_sec; |
| ts->tv_nsec = data->xtime_nsec >> data->cs_shift; |
| |
| to_mono_sec = data->wall_to_mono_sec; |
| to_mono_nsec = data->wall_to_mono_nsec; |
| } while (vdso_data_read_retry(data, start_seq)); |
| |
| ts->tv_sec += to_mono_sec; |
| timespec_add_ns(ts, to_mono_nsec); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_CSRC_R4K |
| |
| static __always_inline u64 read_r4k_count(void) |
| { |
| unsigned int count; |
| |
| __asm__ __volatile__( |
| " .set push\n" |
| " .set mips32r2\n" |
| " rdhwr %0, $2\n" |
| " .set pop\n" |
| : "=r" (count)); |
| |
| return count; |
| } |
| |
| #endif |
| |
| #ifdef CONFIG_CLKSRC_MIPS_GIC |
| |
| static __always_inline u64 read_gic_count(const union mips_vdso_data *data) |
| { |
| void __iomem *gic = get_gic(data); |
| u32 hi, hi2, lo; |
| |
| do { |
| hi = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS); |
| lo = __raw_readl(gic + GIC_UMV_SH_COUNTER_31_00_OFS); |
| hi2 = __raw_readl(gic + GIC_UMV_SH_COUNTER_63_32_OFS); |
| } while (hi2 != hi); |
| |
| return (((u64)hi) << 32) + lo; |
| } |
| |
| #endif |
| |
| static __always_inline u64 get_ns(const union mips_vdso_data *data) |
| { |
| u64 cycle_now, delta, nsec; |
| |
| switch (data->clock_mode) { |
| #ifdef CONFIG_CSRC_R4K |
| case VDSO_CLOCK_R4K: |
| cycle_now = read_r4k_count(); |
| break; |
| #endif |
| #ifdef CONFIG_CLKSRC_MIPS_GIC |
| case VDSO_CLOCK_GIC: |
| cycle_now = read_gic_count(data); |
| break; |
| #endif |
| default: |
| return 0; |
| } |
| |
| delta = (cycle_now - data->cs_cycle_last) & data->cs_mask; |
| |
| nsec = (delta * data->cs_mult) + data->xtime_nsec; |
| nsec >>= data->cs_shift; |
| |
| return nsec; |
| } |
| |
| static __always_inline int do_realtime(struct timespec *ts, |
| const union mips_vdso_data *data) |
| { |
| u32 start_seq; |
| u64 ns; |
| |
| do { |
| start_seq = vdso_data_read_begin(data); |
| |
| if (data->clock_mode == VDSO_CLOCK_NONE) |
| return -ENOSYS; |
| |
| ts->tv_sec = data->xtime_sec; |
| ns = get_ns(data); |
| } while (vdso_data_read_retry(data, start_seq)); |
| |
| ts->tv_nsec = 0; |
| timespec_add_ns(ts, ns); |
| |
| return 0; |
| } |
| |
| static __always_inline int do_monotonic(struct timespec *ts, |
| const union mips_vdso_data *data) |
| { |
| u32 start_seq; |
| u64 ns; |
| u32 to_mono_sec; |
| u32 to_mono_nsec; |
| |
| do { |
| start_seq = vdso_data_read_begin(data); |
| |
| if (data->clock_mode == VDSO_CLOCK_NONE) |
| return -ENOSYS; |
| |
| ts->tv_sec = data->xtime_sec; |
| ns = get_ns(data); |
| |
| to_mono_sec = data->wall_to_mono_sec; |
| to_mono_nsec = data->wall_to_mono_nsec; |
| } while (vdso_data_read_retry(data, start_seq)); |
| |
| ts->tv_sec += to_mono_sec; |
| ts->tv_nsec = 0; |
| timespec_add_ns(ts, ns + to_mono_nsec); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_MIPS_CLOCK_VSYSCALL |
| |
| /* |
| * This is behind the ifdef so that we don't provide the symbol when there's no |
| * possibility of there being a usable clocksource, because there's nothing we |
| * can do without it. When libc fails the symbol lookup it should fall back on |
| * the standard syscall path. |
| */ |
| int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) |
| { |
| const union mips_vdso_data *data = get_vdso_data(); |
| struct timespec ts; |
| int ret; |
| |
| ret = do_realtime(&ts, data); |
| if (ret) |
| return ret; |
| |
| if (tv) { |
| tv->tv_sec = ts.tv_sec; |
| tv->tv_usec = ts.tv_nsec / 1000; |
| } |
| |
| if (tz) { |
| tz->tz_minuteswest = data->tz_minuteswest; |
| tz->tz_dsttime = data->tz_dsttime; |
| } |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_CLKSRC_MIPS_GIC */ |
| |
| int __vdso_clock_gettime(clockid_t clkid, struct timespec *ts) |
| { |
| const union mips_vdso_data *data = get_vdso_data(); |
| int ret; |
| |
| switch (clkid) { |
| case CLOCK_REALTIME_COARSE: |
| ret = do_realtime_coarse(ts, data); |
| break; |
| case CLOCK_MONOTONIC_COARSE: |
| ret = do_monotonic_coarse(ts, data); |
| break; |
| case CLOCK_REALTIME: |
| ret = do_realtime(ts, data); |
| break; |
| case CLOCK_MONOTONIC: |
| ret = do_monotonic(ts, data); |
| break; |
| default: |
| ret = -ENOSYS; |
| break; |
| } |
| |
| /* If we return -ENOSYS libc should fall back to a syscall. */ |
| return ret; |
| } |