| /* |
| * GPR board platform device registration |
| * |
| * Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/leds.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/i2c-gpio.h> |
| |
| #include <asm/mach-au1x00/au1000.h> |
| |
| /* |
| * Watchdog |
| */ |
| static struct resource gpr_wdt_resource[] = { |
| [0] = { |
| .start = 1, |
| .end = 1, |
| .name = "gpr-adm6320-wdt", |
| .flags = IORESOURCE_IRQ, |
| } |
| }; |
| |
| static struct platform_device gpr_wdt_device = { |
| .name = "adm6320-wdt", |
| .id = 0, |
| .num_resources = ARRAY_SIZE(gpr_wdt_resource), |
| .resource = gpr_wdt_resource, |
| }; |
| |
| /* |
| * FLASH |
| * |
| * 0x00000000-0x00200000 : "kernel" |
| * 0x00200000-0x00a00000 : "rootfs" |
| * 0x01d00000-0x01f00000 : "config" |
| * 0x01c00000-0x01d00000 : "yamon" |
| * 0x01d00000-0x01d40000 : "yamon env vars" |
| * 0x00000000-0x00a00000 : "kernel+rootfs" |
| */ |
| static struct mtd_partition gpr_mtd_partitions[] = { |
| { |
| .name = "kernel", |
| .size = 0x00200000, |
| .offset = 0, |
| }, |
| { |
| .name = "rootfs", |
| .size = 0x00800000, |
| .offset = MTDPART_OFS_APPEND, |
| .mask_flags = MTD_WRITEABLE, |
| }, |
| { |
| .name = "config", |
| .size = 0x00200000, |
| .offset = 0x01d00000, |
| }, |
| { |
| .name = "yamon", |
| .size = 0x00100000, |
| .offset = 0x01c00000, |
| }, |
| { |
| .name = "yamon env vars", |
| .size = 0x00040000, |
| .offset = MTDPART_OFS_APPEND, |
| }, |
| { |
| .name = "kernel+rootfs", |
| .size = 0x00a00000, |
| .offset = 0, |
| }, |
| }; |
| |
| static struct physmap_flash_data gpr_flash_data = { |
| .width = 4, |
| .nr_parts = ARRAY_SIZE(gpr_mtd_partitions), |
| .parts = gpr_mtd_partitions, |
| }; |
| |
| static struct resource gpr_mtd_resource = { |
| .start = 0x1e000000, |
| .end = 0x1fffffff, |
| .flags = IORESOURCE_MEM, |
| }; |
| |
| static struct platform_device gpr_mtd_device = { |
| .name = "physmap-flash", |
| .dev = { |
| .platform_data = &gpr_flash_data, |
| }, |
| .num_resources = 1, |
| .resource = &gpr_mtd_resource, |
| }; |
| |
| /* |
| * LEDs |
| */ |
| static struct gpio_led gpr_gpio_leds[] = { |
| { /* green */ |
| .name = "gpr:green", |
| .gpio = 4, |
| .active_low = 1, |
| }, |
| { /* red */ |
| .name = "gpr:red", |
| .gpio = 5, |
| .active_low = 1, |
| } |
| }; |
| |
| static struct gpio_led_platform_data gpr_led_data = { |
| .num_leds = ARRAY_SIZE(gpr_gpio_leds), |
| .leds = gpr_gpio_leds, |
| }; |
| |
| static struct platform_device gpr_led_devices = { |
| .name = "leds-gpio", |
| .id = -1, |
| .dev = { |
| .platform_data = &gpr_led_data, |
| } |
| }; |
| |
| /* |
| * I2C |
| */ |
| static struct i2c_gpio_platform_data gpr_i2c_data = { |
| .sda_pin = 209, |
| .sda_is_open_drain = 1, |
| .scl_pin = 210, |
| .scl_is_open_drain = 1, |
| .udelay = 2, /* ~100 kHz */ |
| .timeout = HZ, |
| }; |
| |
| static struct platform_device gpr_i2c_device = { |
| .name = "i2c-gpio", |
| .id = -1, |
| .dev.platform_data = &gpr_i2c_data, |
| }; |
| |
| static struct i2c_board_info gpr_i2c_info[] __initdata = { |
| { |
| I2C_BOARD_INFO("lm83", 0x18), |
| .type = "lm83" |
| } |
| }; |
| |
| static struct platform_device *gpr_devices[] __initdata = { |
| &gpr_wdt_device, |
| &gpr_mtd_device, |
| &gpr_i2c_device, |
| &gpr_led_devices, |
| }; |
| |
| static int __init gpr_dev_init(void) |
| { |
| i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info)); |
| |
| return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices)); |
| } |
| device_initcall(gpr_dev_init); |