arch/arm/mach-at91/pm_suspend.S - kernel/bruno - Git at Google

 /*
  * arch/arm/mach-at91/pm_slow_clock.S
  *
  *  Copyright (C) 2006 Savin Zlobec
  *
  * AT91SAM9 support:
  *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  */
 #include <linux/linkage.h>
 #include <linux/clk/at91_pmc.h>
 #include "pm.h"

 #define	SRAMC_SELF_FRESH_ACTIVE		0x01
 #define	SRAMC_SELF_FRESH_EXIT		0x00

 pmc	.req	r0
 tmp1	.req	r4
 tmp2	.req	r5

 /*
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
 1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
 	.endm

 /*
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
 1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
 	.endm

 /*
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
 1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
 	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
 	.endm

 /*
  * Put the processor to enter the idle state
  */
 	.macro at91_cpu_idle

 #if defined(CONFIG_CPU_V7)
 	mov	tmp1, #AT91_PMC_PCK
 	str	tmp1, [pmc, #AT91_PMC_SCDR]

 	dsb

 	wfi		@ Wait For Interrupt
 #else
 	mcr	p15, 0, tmp1, c7, c0, 4
 #endif

 	.endm

 	.text

 	.arm

 /*
  * void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *sdramc,
  *			void __iomem *ramc1, int memctrl)
  * @input param:
  * 	@r0: base address of AT91_PMC
  *  	@r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
  *	@r2: base address of second SDRAM Controller or 0 if not present
  *	@r3: pm information
  */
 /* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
 	.align 3
 ENTRY(at91_pm_suspend_in_sram)
 	/* Save registers on stack */
 	stmfd	sp!, {r4 - r12, lr}

 	/* Drain write buffer */
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4

 	str	r0, .pmc_base
 	str	r1, .sramc_base
 	str	r2, .sramc1_base

 	and	r0, r3, #AT91_PM_MEMTYPE_MASK
 	str	r0, .memtype

 	lsr	r0, r3, #AT91_PM_MODE_OFFSET
 	and	r0, r0, #AT91_PM_MODE_MASK
 	str	r0, .pm_mode

 	/* Active the self-refresh mode */
 	mov	r0, #SRAMC_SELF_FRESH_ACTIVE
 	bl	at91_sramc_self_refresh

 	ldr	r0, .pm_mode
 	tst	r0, #AT91_PM_SLOW_CLOCK
 	beq	skip_disable_main_clock

 	ldr	pmc, .pmc_base

 	/* Save Master clock setting */
 	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
 	str	tmp1, .saved_mckr

 	/*
 	 * Set the Master clock source to slow clock
 	 */
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	str	tmp1, [pmc, #AT91_PMC_MCKR]

 	wait_mckrdy

 	/* Save PLLA setting and disable it */
 	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
 	str	tmp1, .saved_pllar

 	mov	tmp1, #AT91_PMC_PLLCOUNT
 	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]

 	/* Turn off the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
 	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]

 skip_disable_main_clock:
 	ldr	pmc, .pmc_base

 	/* Wait for interrupt */
 	at91_cpu_idle

 	ldr	r0, .pm_mode
 	tst	r0, #AT91_PM_SLOW_CLOCK
 	beq	skip_enable_main_clock

 	ldr	pmc, .pmc_base

 	/* Turn on the main oscillator */
 	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
 	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
 	orr	tmp1, tmp1, #AT91_PMC_KEY
 	str	tmp1, [pmc, #AT91_CKGR_MOR]

 	wait_moscrdy

 	/* Restore PLLA setting */
 	ldr	tmp1, .saved_pllar
 	str	tmp1, [pmc, #AT91_CKGR_PLLAR]

 	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
 	bne	3f
 	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
 	beq	4f
 3:
 	wait_pllalock
 4:

 	/*
 	 * Restore master clock setting
 	 */
 	ldr	tmp1, .saved_mckr
 	str	tmp1, [pmc, #AT91_PMC_MCKR]

 	wait_mckrdy

 skip_enable_main_clock:
 	/* Exit the self-refresh mode */
 	mov	r0, #SRAMC_SELF_FRESH_EXIT
 	bl	at91_sramc_self_refresh

 	/* Restore registers, and return */
 	ldmfd	sp!, {r4 - r12, pc}
 ENDPROC(at91_pm_suspend_in_sram)

 /*
  * void at91_sramc_self_refresh(unsigned int is_active)
  *
  * @input param:
  *	@r0: 1 - active self-refresh mode
  *	     0 - exit self-refresh mode
  * register usage:
  * 	@r1: memory type
  *	@r2: base address of the sram controller
  */

 ENTRY(at91_sramc_self_refresh)
 	ldr	r1, .memtype
 	ldr	r2, .sramc_base

 	cmp	r1, #AT91_MEMCTRL_MC
 	bne	ddrc_sf

 	/*
 	 * at91rm9200 Memory controller
 	 */

 	 /*
 	  * For exiting the self-refresh mode, do nothing,
 	  * automatically exit the self-refresh mode.
 	  */
 	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
 	beq	exit_sramc_sf

 	/* Active SDRAM self-refresh mode */
 	mov	r3, #1
 	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
 	b	exit_sramc_sf

 ddrc_sf:
 	cmp	r1, #AT91_MEMCTRL_DDRSDR
 	bne	sdramc_sf

 	/*
 	 * DDR Memory controller
 	 */
 	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
 	beq	ddrc_exit_sf

 	/* LPDDR1 --> force DDR2 mode during self-refresh */
 	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
 	str	r3, .saved_sam9_mdr
 	bic	r3, r3, #~AT91_DDRSDRC_MD
 	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
 	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
 	biceq	r3, r3, #AT91_DDRSDRC_MD
 	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
 	streq	r3, [r2, #AT91_DDRSDRC_MDR]

 	/* Active DDRC self-refresh mode */
 	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
 	str	r3, .saved_sam9_lpr
 	bic	r3, r3, #AT91_DDRSDRC_LPCB
 	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
 	str	r3, [r2, #AT91_DDRSDRC_LPR]

 	/* If using the 2nd ddr controller */
 	ldr	r2, .sramc1_base
 	cmp	r2, #0
 	beq	no_2nd_ddrc

 	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
 	str	r3, .saved_sam9_mdr1
 	bic	r3, r3, #~AT91_DDRSDRC_MD
 	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
 	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
 	biceq	r3, r3, #AT91_DDRSDRC_MD
 	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
 	streq	r3, [r2, #AT91_DDRSDRC_MDR]

 	/* Active DDRC self-refresh mode */
 	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
 	str	r3, .saved_sam9_lpr1
 	bic	r3, r3, #AT91_DDRSDRC_LPCB
 	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
 	str	r3, [r2, #AT91_DDRSDRC_LPR]

 no_2nd_ddrc:
 	b	exit_sramc_sf

 ddrc_exit_sf:
 	/* Restore MDR in case of LPDDR1 */
 	ldr	r3, .saved_sam9_mdr
 	str	r3, [r2, #AT91_DDRSDRC_MDR]
 	/* Restore LPR on AT91 with DDRAM */
 	ldr	r3, .saved_sam9_lpr
 	str	r3, [r2, #AT91_DDRSDRC_LPR]

 	/* If using the 2nd ddr controller */
 	ldr	r2, .sramc1_base
 	cmp	r2, #0
 	ldrne	r3, .saved_sam9_mdr1
 	strne	r3, [r2, #AT91_DDRSDRC_MDR]
 	ldrne	r3, .saved_sam9_lpr1
 	strne	r3, [r2, #AT91_DDRSDRC_LPR]

 	b	exit_sramc_sf

 	/*
 	 * SDRAMC Memory controller
 	 */
 sdramc_sf:
 	tst	r0, #SRAMC_SELF_FRESH_ACTIVE
 	beq	sdramc_exit_sf

 	/* Active SDRAMC self-refresh mode */
 	ldr	r3, [r2, #AT91_SDRAMC_LPR]
 	str	r3, .saved_sam9_lpr
 	bic	r3, r3, #AT91_SDRAMC_LPCB
 	orr	r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
 	str	r3, [r2, #AT91_SDRAMC_LPR]

 sdramc_exit_sf:
 	ldr	r3, .saved_sam9_lpr
 	str	r3, [r2, #AT91_SDRAMC_LPR]

 exit_sramc_sf:
 	mov	pc, lr
 ENDPROC(at91_sramc_self_refresh)

 .pmc_base:
 	.word 0
 .sramc_base:
 	.word 0
 .sramc1_base:
 	.word 0
 .memtype:
 	.word 0
 .pm_mode:
 	.word 0
 .saved_mckr:
 	.word 0
 .saved_pllar:
 	.word 0
 .saved_sam9_lpr:
 	.word 0
 .saved_sam9_lpr1:
 	.word 0
 .saved_sam9_mdr:
 	.word 0
 .saved_sam9_mdr1:
 	.word 0

 ENTRY(at91_pm_suspend_in_sram_sz)
 	.word .-at91_pm_suspend_in_sram
	/*
	* arch/arm/mach-at91/pm_slow_clock.S
	*
	* Copyright (C) 2006 Savin Zlobec
	*
	* AT91SAM9 support:
	* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	*/
	#include <linux/linkage.h>
	#include <linux/clk/at91_pmc.h>
	#include "pm.h"

	#define SRAMC_SELF_FRESH_ACTIVE 0x01
	#define SRAMC_SELF_FRESH_EXIT 0x00

	pmc .req r0
	tmp1 .req r4
	tmp2 .req r5

	/*
	* Wait until master clock is ready (after switching master clock source)
	*/
	.macro wait_mckrdy
	1: ldr tmp1, [pmc, #AT91_PMC_SR]
	tst tmp1, #AT91_PMC_MCKRDY
	beq 1b
	.endm

	/*
	* Wait until master oscillator has stabilized.
	*/
	.macro wait_moscrdy
	1: ldr tmp1, [pmc, #AT91_PMC_SR]
	tst tmp1, #AT91_PMC_MOSCS
	beq 1b
	.endm

	/*
	* Wait until PLLA has locked.
	*/
	.macro wait_pllalock
	1: ldr tmp1, [pmc, #AT91_PMC_SR]
	tst tmp1, #AT91_PMC_LOCKA
	beq 1b
	.endm

	/*
	* Put the processor to enter the idle state
	*/
	.macro at91_cpu_idle

	#if defined(CONFIG_CPU_V7)
	mov tmp1, #AT91_PMC_PCK
	str tmp1, [pmc, #AT91_PMC_SCDR]

	dsb

	wfi @ Wait For Interrupt
	#else
	mcr p15, 0, tmp1, c7, c0, 4
	#endif

	.endm

	.text

	.arm

	/*
	* void at91_pm_suspend_in_sram(void __iomem pmc, void __iomem sdramc,
	* void __iomem *ramc1, int memctrl)
	* @input param:
	* @r0: base address of AT91_PMC
	* @r1: base address of SDRAM Controller (SDRAM, DDRSDR, or AT91_SYS)
	* @r2: base address of second SDRAM Controller or 0 if not present
	* @r3: pm information
	*/
	/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
	.align 3
	ENTRY(at91_pm_suspend_in_sram)
	/* Save registers on stack */
	stmfd sp!, {r4 - r12, lr}

	/* Drain write buffer */
	mov tmp1, #0
	mcr p15, 0, tmp1, c7, c10, 4

	str r0, .pmc_base
	str r1, .sramc_base
	str r2, .sramc1_base

	and r0, r3, #AT91_PM_MEMTYPE_MASK
	str r0, .memtype

	lsr r0, r3, #AT91_PM_MODE_OFFSET
	and r0, r0, #AT91_PM_MODE_MASK
	str r0, .pm_mode

	/* Active the self-refresh mode */
	mov r0, #SRAMC_SELF_FRESH_ACTIVE
	bl at91_sramc_self_refresh

	ldr r0, .pm_mode
	tst r0, #AT91_PM_SLOW_CLOCK
	beq skip_disable_main_clock

	ldr pmc, .pmc_base

	/* Save Master clock setting */
	ldr tmp1, [pmc, #AT91_PMC_MCKR]
	str tmp1, .saved_mckr

	/*
	* Set the Master clock source to slow clock
	*/
	bic tmp1, tmp1, #AT91_PMC_CSS
	str tmp1, [pmc, #AT91_PMC_MCKR]

	wait_mckrdy

	/* Save PLLA setting and disable it */
	ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
	str tmp1, .saved_pllar

	mov tmp1, #AT91_PMC_PLLCOUNT
	orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
	str tmp1, [pmc, #AT91_CKGR_PLLAR]

	/* Turn off the main oscillator */
	ldr tmp1, [pmc, #AT91_CKGR_MOR]
	bic tmp1, tmp1, #AT91_PMC_MOSCEN
	orr tmp1, tmp1, #AT91_PMC_KEY
	str tmp1, [pmc, #AT91_CKGR_MOR]

	skip_disable_main_clock:
	ldr pmc, .pmc_base

	/* Wait for interrupt */
	at91_cpu_idle

	ldr r0, .pm_mode
	tst r0, #AT91_PM_SLOW_CLOCK
	beq skip_enable_main_clock

	ldr pmc, .pmc_base

	/* Turn on the main oscillator */
	ldr tmp1, [pmc, #AT91_CKGR_MOR]
	orr tmp1, tmp1, #AT91_PMC_MOSCEN
	orr tmp1, tmp1, #AT91_PMC_KEY
	str tmp1, [pmc, #AT91_CKGR_MOR]

	wait_moscrdy

	/* Restore PLLA setting */
	ldr tmp1, .saved_pllar
	str tmp1, [pmc, #AT91_CKGR_PLLAR]

	tst tmp1, #(AT91_PMC_MUL & 0xff0000)
	bne 3f
	tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
	beq 4f
	3:
	wait_pllalock
	4:

	/*
	* Restore master clock setting
	*/
	ldr tmp1, .saved_mckr
	str tmp1, [pmc, #AT91_PMC_MCKR]

	wait_mckrdy

	skip_enable_main_clock:
	/* Exit the self-refresh mode */
	mov r0, #SRAMC_SELF_FRESH_EXIT
	bl at91_sramc_self_refresh

	/* Restore registers, and return */
	ldmfd sp!, {r4 - r12, pc}
	ENDPROC(at91_pm_suspend_in_sram)

	/*
	* void at91_sramc_self_refresh(unsigned int is_active)
	*
	* @input param:
	* @r0: 1 - active self-refresh mode
	* 0 - exit self-refresh mode
	* register usage:
	* @r1: memory type
	* @r2: base address of the sram controller
	*/

	ENTRY(at91_sramc_self_refresh)
	ldr r1, .memtype
	ldr r2, .sramc_base

	cmp r1, #AT91_MEMCTRL_MC
	bne ddrc_sf

	/*
	* at91rm9200 Memory controller
	*/

	/*
	* For exiting the self-refresh mode, do nothing,
	* automatically exit the self-refresh mode.
	*/
	tst r0, #SRAMC_SELF_FRESH_ACTIVE
	beq exit_sramc_sf

	/* Active SDRAM self-refresh mode */
	mov r3, #1
	str r3, [r2, #AT91_MC_SDRAMC_SRR]
	b exit_sramc_sf

	ddrc_sf:
	cmp r1, #AT91_MEMCTRL_DDRSDR
	bne sdramc_sf

	/*
	* DDR Memory controller
	*/
	tst r0, #SRAMC_SELF_FRESH_ACTIVE
	beq ddrc_exit_sf

	/* LPDDR1 --> force DDR2 mode during self-refresh */
	ldr r3, [r2, #AT91_DDRSDRC_MDR]
	str r3, .saved_sam9_mdr
	bic r3, r3, #~AT91_DDRSDRC_MD
	cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
	ldreq r3, [r2, #AT91_DDRSDRC_MDR]
	biceq r3, r3, #AT91_DDRSDRC_MD
	orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
	streq r3, [r2, #AT91_DDRSDRC_MDR]

	/* Active DDRC self-refresh mode */
	ldr r3, [r2, #AT91_DDRSDRC_LPR]
	str r3, .saved_sam9_lpr
	bic r3, r3, #AT91_DDRSDRC_LPCB
	orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
	str r3, [r2, #AT91_DDRSDRC_LPR]

	/* If using the 2nd ddr controller */
	ldr r2, .sramc1_base
	cmp r2, #0
	beq no_2nd_ddrc

	ldr r3, [r2, #AT91_DDRSDRC_MDR]
	str r3, .saved_sam9_mdr1
	bic r3, r3, #~AT91_DDRSDRC_MD
	cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
	ldreq r3, [r2, #AT91_DDRSDRC_MDR]
	biceq r3, r3, #AT91_DDRSDRC_MD
	orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
	streq r3, [r2, #AT91_DDRSDRC_MDR]

	/* Active DDRC self-refresh mode */
	ldr r3, [r2, #AT91_DDRSDRC_LPR]
	str r3, .saved_sam9_lpr1
	bic r3, r3, #AT91_DDRSDRC_LPCB
	orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
	str r3, [r2, #AT91_DDRSDRC_LPR]

	no_2nd_ddrc:
	b exit_sramc_sf

	ddrc_exit_sf:
	/* Restore MDR in case of LPDDR1 */
	ldr r3, .saved_sam9_mdr
	str r3, [r2, #AT91_DDRSDRC_MDR]
	/* Restore LPR on AT91 with DDRAM */
	ldr r3, .saved_sam9_lpr
	str r3, [r2, #AT91_DDRSDRC_LPR]

	/* If using the 2nd ddr controller */
	ldr r2, .sramc1_base
	cmp r2, #0
	ldrne r3, .saved_sam9_mdr1
	strne r3, [r2, #AT91_DDRSDRC_MDR]
	ldrne r3, .saved_sam9_lpr1
	strne r3, [r2, #AT91_DDRSDRC_LPR]

	b exit_sramc_sf

	/*
	* SDRAMC Memory controller
	*/
	sdramc_sf:
	tst r0, #SRAMC_SELF_FRESH_ACTIVE
	beq sdramc_exit_sf

	/* Active SDRAMC self-refresh mode */
	ldr r3, [r2, #AT91_SDRAMC_LPR]
	str r3, .saved_sam9_lpr
	bic r3, r3, #AT91_SDRAMC_LPCB
	orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
	str r3, [r2, #AT91_SDRAMC_LPR]

	sdramc_exit_sf:
	ldr r3, .saved_sam9_lpr
	str r3, [r2, #AT91_SDRAMC_LPR]

	exit_sramc_sf:
	mov pc, lr
	ENDPROC(at91_sramc_self_refresh)

	.pmc_base:
	.word 0
	.sramc_base:
	.word 0
	.sramc1_base:
	.word 0
	.memtype:
	.word 0
	.pm_mode:
	.word 0
	.saved_mckr:
	.word 0
	.saved_pllar:
	.word 0
	.saved_sam9_lpr:
	.word 0
	.saved_sam9_lpr1:
	.word 0
	.saved_sam9_mdr:
	.word 0
	.saved_sam9_mdr1:
	.word 0

	ENTRY(at91_pm_suspend_in_sram_sz)
	.word .-at91_pm_suspend_in_sram