| /* |
| * Wondermedia I2C Master Mode Driver |
| * |
| * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> |
| * |
| * Derived from GPLv2+ licensed source: |
| * - Copyright (C) 2008 WonderMedia Technologies, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2, or |
| * (at your option) any later version. as published by the Free Software |
| * Foundation |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| |
| #define REG_CR 0x00 |
| #define REG_TCR 0x02 |
| #define REG_CSR 0x04 |
| #define REG_ISR 0x06 |
| #define REG_IMR 0x08 |
| #define REG_CDR 0x0A |
| #define REG_TR 0x0C |
| #define REG_MCR 0x0E |
| #define REG_SLAVE_CR 0x10 |
| #define REG_SLAVE_SR 0x12 |
| #define REG_SLAVE_ISR 0x14 |
| #define REG_SLAVE_IMR 0x16 |
| #define REG_SLAVE_DR 0x18 |
| #define REG_SLAVE_TR 0x1A |
| |
| /* REG_CR Bit fields */ |
| #define CR_TX_NEXT_ACK 0x0000 |
| #define CR_ENABLE 0x0001 |
| #define CR_TX_NEXT_NO_ACK 0x0002 |
| #define CR_TX_END 0x0004 |
| #define CR_CPU_RDY 0x0008 |
| #define SLAV_MODE_SEL 0x8000 |
| |
| /* REG_TCR Bit fields */ |
| #define TCR_STANDARD_MODE 0x0000 |
| #define TCR_MASTER_WRITE 0x0000 |
| #define TCR_HS_MODE 0x2000 |
| #define TCR_MASTER_READ 0x4000 |
| #define TCR_FAST_MODE 0x8000 |
| #define TCR_SLAVE_ADDR_MASK 0x007F |
| |
| /* REG_ISR Bit fields */ |
| #define ISR_NACK_ADDR 0x0001 |
| #define ISR_BYTE_END 0x0002 |
| #define ISR_SCL_TIMEOUT 0x0004 |
| #define ISR_WRITE_ALL 0x0007 |
| |
| /* REG_IMR Bit fields */ |
| #define IMR_ENABLE_ALL 0x0007 |
| |
| /* REG_CSR Bit fields */ |
| #define CSR_RCV_NOT_ACK 0x0001 |
| #define CSR_RCV_ACK_MASK 0x0001 |
| #define CSR_READY_MASK 0x0002 |
| |
| /* REG_TR */ |
| #define SCL_TIMEOUT(x) (((x) & 0xFF) << 8) |
| #define TR_STD 0x0064 |
| #define TR_HS 0x0019 |
| |
| /* REG_MCR */ |
| #define MCR_APB_96M 7 |
| #define MCR_APB_166M 12 |
| |
| #define I2C_MODE_STANDARD 0 |
| #define I2C_MODE_FAST 1 |
| |
| #define WMT_I2C_TIMEOUT (msecs_to_jiffies(1000)) |
| |
| struct wmt_i2c_dev { |
| struct i2c_adapter adapter; |
| struct completion complete; |
| struct device *dev; |
| void __iomem *base; |
| struct clk *clk; |
| int mode; |
| int irq; |
| u16 cmd_status; |
| }; |
| |
| static int wmt_i2c_wait_bus_not_busy(struct wmt_i2c_dev *i2c_dev) |
| { |
| unsigned long timeout; |
| |
| timeout = jiffies + WMT_I2C_TIMEOUT; |
| while (!(readw(i2c_dev->base + REG_CSR) & CSR_READY_MASK)) { |
| if (time_after(jiffies, timeout)) { |
| dev_warn(i2c_dev->dev, "timeout waiting for bus ready\n"); |
| return -EBUSY; |
| } |
| msleep(20); |
| } |
| |
| return 0; |
| } |
| |
| static int wmt_check_status(struct wmt_i2c_dev *i2c_dev) |
| { |
| int ret = 0; |
| |
| if (i2c_dev->cmd_status & ISR_NACK_ADDR) |
| ret = -EIO; |
| |
| if (i2c_dev->cmd_status & ISR_SCL_TIMEOUT) |
| ret = -ETIMEDOUT; |
| |
| return ret; |
| } |
| |
| static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg, |
| int last) |
| { |
| struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap); |
| u16 val, tcr_val; |
| int ret; |
| unsigned long wait_result; |
| int xfer_len = 0; |
| |
| if (!(pmsg->flags & I2C_M_NOSTART)) { |
| ret = wmt_i2c_wait_bus_not_busy(i2c_dev); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (pmsg->len == 0) { |
| /* |
| * We still need to run through the while (..) once, so |
| * start at -1 and break out early from the loop |
| */ |
| xfer_len = -1; |
| writew(0, i2c_dev->base + REG_CDR); |
| } else { |
| writew(pmsg->buf[0] & 0xFF, i2c_dev->base + REG_CDR); |
| } |
| |
| if (!(pmsg->flags & I2C_M_NOSTART)) { |
| val = readw(i2c_dev->base + REG_CR); |
| val &= ~CR_TX_END; |
| writew(val, i2c_dev->base + REG_CR); |
| |
| val = readw(i2c_dev->base + REG_CR); |
| val |= CR_CPU_RDY; |
| writew(val, i2c_dev->base + REG_CR); |
| } |
| |
| reinit_completion(&i2c_dev->complete); |
| |
| if (i2c_dev->mode == I2C_MODE_STANDARD) |
| tcr_val = TCR_STANDARD_MODE; |
| else |
| tcr_val = TCR_FAST_MODE; |
| |
| tcr_val |= (TCR_MASTER_WRITE | (pmsg->addr & TCR_SLAVE_ADDR_MASK)); |
| |
| writew(tcr_val, i2c_dev->base + REG_TCR); |
| |
| if (pmsg->flags & I2C_M_NOSTART) { |
| val = readw(i2c_dev->base + REG_CR); |
| val |= CR_CPU_RDY; |
| writew(val, i2c_dev->base + REG_CR); |
| } |
| |
| while (xfer_len < pmsg->len) { |
| wait_result = wait_for_completion_timeout(&i2c_dev->complete, |
| msecs_to_jiffies(500)); |
| |
| if (wait_result == 0) |
| return -ETIMEDOUT; |
| |
| ret = wmt_check_status(i2c_dev); |
| if (ret) |
| return ret; |
| |
| xfer_len++; |
| |
| val = readw(i2c_dev->base + REG_CSR); |
| if ((val & CSR_RCV_ACK_MASK) == CSR_RCV_NOT_ACK) { |
| dev_dbg(i2c_dev->dev, "write RCV NACK error\n"); |
| return -EIO; |
| } |
| |
| if (pmsg->len == 0) { |
| val = CR_TX_END | CR_CPU_RDY | CR_ENABLE; |
| writew(val, i2c_dev->base + REG_CR); |
| break; |
| } |
| |
| if (xfer_len == pmsg->len) { |
| if (last != 1) |
| writew(CR_ENABLE, i2c_dev->base + REG_CR); |
| } else { |
| writew(pmsg->buf[xfer_len] & 0xFF, i2c_dev->base + |
| REG_CDR); |
| writew(CR_CPU_RDY | CR_ENABLE, i2c_dev->base + REG_CR); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg, |
| int last) |
| { |
| struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap); |
| u16 val, tcr_val; |
| int ret; |
| unsigned long wait_result; |
| u32 xfer_len = 0; |
| |
| if (!(pmsg->flags & I2C_M_NOSTART)) { |
| ret = wmt_i2c_wait_bus_not_busy(i2c_dev); |
| if (ret < 0) |
| return ret; |
| } |
| |
| val = readw(i2c_dev->base + REG_CR); |
| val &= ~CR_TX_END; |
| writew(val, i2c_dev->base + REG_CR); |
| |
| val = readw(i2c_dev->base + REG_CR); |
| val &= ~CR_TX_NEXT_NO_ACK; |
| writew(val, i2c_dev->base + REG_CR); |
| |
| if (!(pmsg->flags & I2C_M_NOSTART)) { |
| val = readw(i2c_dev->base + REG_CR); |
| val |= CR_CPU_RDY; |
| writew(val, i2c_dev->base + REG_CR); |
| } |
| |
| if (pmsg->len == 1) { |
| val = readw(i2c_dev->base + REG_CR); |
| val |= CR_TX_NEXT_NO_ACK; |
| writew(val, i2c_dev->base + REG_CR); |
| } |
| |
| reinit_completion(&i2c_dev->complete); |
| |
| if (i2c_dev->mode == I2C_MODE_STANDARD) |
| tcr_val = TCR_STANDARD_MODE; |
| else |
| tcr_val = TCR_FAST_MODE; |
| |
| tcr_val |= TCR_MASTER_READ | (pmsg->addr & TCR_SLAVE_ADDR_MASK); |
| |
| writew(tcr_val, i2c_dev->base + REG_TCR); |
| |
| if (pmsg->flags & I2C_M_NOSTART) { |
| val = readw(i2c_dev->base + REG_CR); |
| val |= CR_CPU_RDY; |
| writew(val, i2c_dev->base + REG_CR); |
| } |
| |
| while (xfer_len < pmsg->len) { |
| wait_result = wait_for_completion_timeout(&i2c_dev->complete, |
| msecs_to_jiffies(500)); |
| |
| if (!wait_result) |
| return -ETIMEDOUT; |
| |
| ret = wmt_check_status(i2c_dev); |
| if (ret) |
| return ret; |
| |
| pmsg->buf[xfer_len] = readw(i2c_dev->base + REG_CDR) >> 8; |
| xfer_len++; |
| |
| if (xfer_len == pmsg->len - 1) { |
| val = readw(i2c_dev->base + REG_CR); |
| val |= (CR_TX_NEXT_NO_ACK | CR_CPU_RDY); |
| writew(val, i2c_dev->base + REG_CR); |
| } else { |
| val = readw(i2c_dev->base + REG_CR); |
| val |= CR_CPU_RDY; |
| writew(val, i2c_dev->base + REG_CR); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int wmt_i2c_xfer(struct i2c_adapter *adap, |
| struct i2c_msg msgs[], |
| int num) |
| { |
| struct i2c_msg *pmsg; |
| int i, is_last; |
| int ret = 0; |
| |
| for (i = 0; ret >= 0 && i < num; i++) { |
| is_last = ((i + 1) == num); |
| |
| pmsg = &msgs[i]; |
| if (pmsg->flags & I2C_M_RD) |
| ret = wmt_i2c_read(adap, pmsg, is_last); |
| else |
| ret = wmt_i2c_write(adap, pmsg, is_last); |
| } |
| |
| return (ret < 0) ? ret : i; |
| } |
| |
| static u32 wmt_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART; |
| } |
| |
| static const struct i2c_algorithm wmt_i2c_algo = { |
| .master_xfer = wmt_i2c_xfer, |
| .functionality = wmt_i2c_func, |
| }; |
| |
| static irqreturn_t wmt_i2c_isr(int irq, void *data) |
| { |
| struct wmt_i2c_dev *i2c_dev = data; |
| |
| /* save the status and write-clear it */ |
| i2c_dev->cmd_status = readw(i2c_dev->base + REG_ISR); |
| writew(i2c_dev->cmd_status, i2c_dev->base + REG_ISR); |
| |
| complete(&i2c_dev->complete); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int wmt_i2c_reset_hardware(struct wmt_i2c_dev *i2c_dev) |
| { |
| int err; |
| |
| err = clk_prepare_enable(i2c_dev->clk); |
| if (err) { |
| dev_err(i2c_dev->dev, "failed to enable clock\n"); |
| return err; |
| } |
| |
| err = clk_set_rate(i2c_dev->clk, 20000000); |
| if (err) { |
| dev_err(i2c_dev->dev, "failed to set clock = 20Mhz\n"); |
| clk_disable_unprepare(i2c_dev->clk); |
| return err; |
| } |
| |
| writew(0, i2c_dev->base + REG_CR); |
| writew(MCR_APB_166M, i2c_dev->base + REG_MCR); |
| writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR); |
| writew(IMR_ENABLE_ALL, i2c_dev->base + REG_IMR); |
| writew(CR_ENABLE, i2c_dev->base + REG_CR); |
| readw(i2c_dev->base + REG_CSR); /* read clear */ |
| writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR); |
| |
| if (i2c_dev->mode == I2C_MODE_STANDARD) |
| writew(SCL_TIMEOUT(128) | TR_STD, i2c_dev->base + REG_TR); |
| else |
| writew(SCL_TIMEOUT(128) | TR_HS, i2c_dev->base + REG_TR); |
| |
| return 0; |
| } |
| |
| static int wmt_i2c_probe(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct wmt_i2c_dev *i2c_dev; |
| struct i2c_adapter *adap; |
| struct resource *res; |
| int err; |
| u32 clk_rate; |
| |
| i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL); |
| if (!i2c_dev) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| i2c_dev->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(i2c_dev->base)) |
| return PTR_ERR(i2c_dev->base); |
| |
| i2c_dev->irq = irq_of_parse_and_map(np, 0); |
| if (!i2c_dev->irq) { |
| dev_err(&pdev->dev, "irq missing or invalid\n"); |
| return -EINVAL; |
| } |
| |
| i2c_dev->clk = of_clk_get(np, 0); |
| if (IS_ERR(i2c_dev->clk)) { |
| dev_err(&pdev->dev, "unable to request clock\n"); |
| return PTR_ERR(i2c_dev->clk); |
| } |
| |
| i2c_dev->mode = I2C_MODE_STANDARD; |
| err = of_property_read_u32(np, "clock-frequency", &clk_rate); |
| if ((!err) && (clk_rate == 400000)) |
| i2c_dev->mode = I2C_MODE_FAST; |
| |
| i2c_dev->dev = &pdev->dev; |
| |
| err = devm_request_irq(&pdev->dev, i2c_dev->irq, wmt_i2c_isr, 0, |
| "i2c", i2c_dev); |
| if (err) { |
| dev_err(&pdev->dev, "failed to request irq %i\n", i2c_dev->irq); |
| return err; |
| } |
| |
| adap = &i2c_dev->adapter; |
| i2c_set_adapdata(adap, i2c_dev); |
| strlcpy(adap->name, "WMT I2C adapter", sizeof(adap->name)); |
| adap->owner = THIS_MODULE; |
| adap->algo = &wmt_i2c_algo; |
| adap->dev.parent = &pdev->dev; |
| adap->dev.of_node = pdev->dev.of_node; |
| |
| init_completion(&i2c_dev->complete); |
| |
| err = wmt_i2c_reset_hardware(i2c_dev); |
| if (err) { |
| dev_err(&pdev->dev, "error initializing hardware\n"); |
| return err; |
| } |
| |
| err = i2c_add_adapter(adap); |
| if (err) { |
| dev_err(&pdev->dev, "failed to add adapter\n"); |
| return err; |
| } |
| |
| platform_set_drvdata(pdev, i2c_dev); |
| |
| return 0; |
| } |
| |
| static int wmt_i2c_remove(struct platform_device *pdev) |
| { |
| struct wmt_i2c_dev *i2c_dev = platform_get_drvdata(pdev); |
| |
| /* Disable interrupts, clock and delete adapter */ |
| writew(0, i2c_dev->base + REG_IMR); |
| clk_disable_unprepare(i2c_dev->clk); |
| i2c_del_adapter(&i2c_dev->adapter); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id wmt_i2c_dt_ids[] = { |
| { .compatible = "wm,wm8505-i2c" }, |
| { /* Sentinel */ }, |
| }; |
| |
| static struct platform_driver wmt_i2c_driver = { |
| .probe = wmt_i2c_probe, |
| .remove = wmt_i2c_remove, |
| .driver = { |
| .name = "wmt-i2c", |
| .of_match_table = wmt_i2c_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(wmt_i2c_driver); |
| |
| MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter"); |
| MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids); |