| /********************************************************************* |
| * |
| * Filename: toshoboe.h |
| * Version: 2.16 |
| * Description: Driver for the Toshiba OBOE (or type-O or 701) |
| * FIR Chipset, also supports the DONAUOBOE (type-DO |
| * or d01) FIR chipset which as far as I know is |
| * register compatible. |
| * Status: Experimental. |
| * Author: James McKenzie <james@fishsoup.dhs.org> |
| * Created at: Sat May 8 12:35:27 1999 |
| * Modified: 2.16 Martin Lucina <mato@kotelna.sk> |
| * Modified: 2.16 Sat Jun 22 18:54:29 2002 (sync headers) |
| * Modified: 2.17 Christian Gennerat <christian.gennerat@polytechnique.org> |
| * Modified: 2.17 jeu sep 12 08:50:20 2002 (add lock to be used by spinlocks) |
| * |
| * Copyright (c) 1999 James McKenzie, All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * Neither James McKenzie nor Cambridge University admit liability nor |
| * provide warranty for any of this software. This material is |
| * provided "AS-IS" and at no charge. |
| * |
| * Applicable Models : Libretto 100/110CT and many more. |
| * Toshiba refers to this chip as the type-O IR port, |
| * or the type-DO IR port. |
| * |
| * IrDA chip set list from Toshiba Computer Engineering Corp. |
| * model method maker controler Version |
| * Portege 320CT FIR,SIR Toshiba Oboe(Triangle) |
| * Portege 3010CT FIR,SIR Toshiba Oboe(Sydney) |
| * Portege 3015CT FIR,SIR Toshiba Oboe(Sydney) |
| * Portege 3020CT FIR,SIR Toshiba Oboe(Sydney) |
| * Portege 7020CT FIR,SIR ? ? |
| * |
| * Satell. 4090XCDT FIR,SIR ? ? |
| * |
| * Libretto 100CT FIR,SIR Toshiba Oboe |
| * Libretto 1000CT FIR,SIR Toshiba Oboe |
| * |
| * TECRA750DVD FIR,SIR Toshiba Oboe(Triangle) REV ID=14h |
| * TECRA780 FIR,SIR Toshiba Oboe(Sandlot) REV ID=32h,33h |
| * TECRA750CDT FIR,SIR Toshiba Oboe(Triangle) REV ID=13h,14h |
| * TECRA8000 FIR,SIR Toshiba Oboe(ISKUR) REV ID=23h |
| * |
| ********************************************************************/ |
| |
| /* The documentation for this chip is allegedly released */ |
| /* However I have not seen it, not have I managed to contact */ |
| /* anyone who has. HOWEVER the chip bears a striking resemblence */ |
| /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ |
| /* the documentation for this is freely available at */ |
| /* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ |
| /* The mapping between the registers in that document and the */ |
| /* Registers in the 701 oboe chip are as follows */ |
| |
| |
| /* 3922 reg 701 regs, by bit numbers */ |
| /* 7- 0 15- 8 24-16 31-25 */ |
| /* $28 0x0 0x1 */ |
| /* $2c SEE NOTE 1 */ |
| /* $30 0x6 0x7 */ |
| /* $34 0x8 0x9 SEE NOTE 2 */ |
| /* $38 0x10 0x11 */ |
| /* $3C 0xe SEE NOTE 3 */ |
| /* $40 0x12 0x13 */ |
| /* $44 0x14 0x15 */ |
| /* $48 0x16 0x17 */ |
| /* $4c 0x18 0x19 */ |
| /* $50 0x1a 0x1b */ |
| |
| /* FIXME: could be 0x1b 0x1a here */ |
| |
| /* $54 0x1d 0x1c */ |
| /* $5C 0xf SEE NOTE 4 */ |
| /* $130 SEE NOTE 5 */ |
| /* $134 SEE NOTE 6 */ |
| /* */ |
| /* NOTES: */ |
| /* 1. The pointer to ring is packed in most unceremoniusly */ |
| /* 701 Register Address bits (A9-A0 must be zero) */ |
| /* 0x4: A17 A16 A15 A14 A13 A12 A11 A10 */ |
| /* 0x5: A25 A24 A23 A22 A21 A20 A19 A18 */ |
| /* 0x2: 0 0 A31 A30 A29 A28 A27 A26 */ |
| /* */ |
| /* 2. The M$ drivers do a write 0x1 to 0x9, however the 3922 */ |
| /* documentation would suggest that a write of 0x1 to 0x8 */ |
| /* would be more appropriate. */ |
| /* */ |
| /* 3. This assignment is tenuous at best, register 0xe seems to */ |
| /* have bits arranged 0 0 0 R/W R/W R/W R/W R/W */ |
| /* if either of the lower two bits are set the chip seems to */ |
| /* switch off */ |
| /* */ |
| /* 4. Bits 7-4 seem to be different 4 seems just to be generic */ |
| /* receiver busy flag */ |
| /* */ |
| /* 5. and 6. The IER and ISR have a different bit assignment */ |
| /* The lower three bits of both read back as ones */ |
| /* ISR is register 0xc, IER is register 0xd */ |
| /* 7 6 5 4 3 2 1 0 */ |
| /* 0xc: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */ |
| /* 0xd: TxDone RxDone TxUndr RxOver SipRcv 1 1 1 */ |
| /* TxDone xmitt done (generated only if generate interrupt bit */ |
| /* is set in the ring) */ |
| /* RxDone recv completed (or other recv condition if you set it */ |
| /* up */ |
| /* TxUnder underflow in Transmit FIFO */ |
| /* RxOver overflow in Recv FIFO */ |
| /* SipRcv received serial gap (or other condition you set) */ |
| /* Interrupts are enabled by writing a one to the IER register */ |
| /* Interrupts are cleared by writing a one to the ISR register */ |
| /* */ |
| /* 6. The remaining registers: 0x6 and 0x3 appear to be */ |
| /* reserved parts of 16 or 32 bit registersthe remainder */ |
| /* 0xa 0xb 0x1e 0x1f could possibly be (by their behaviour) */ |
| /* the Unicast Filter register at $58. */ |
| /* */ |
| /* 7. While the core obviously expects 32 bit accesses all the */ |
| /* M$ drivers do 8 bit accesses, infact the Miniport ones */ |
| /* write and read back the byte serveral times (why?) */ |
| |
| |
| #ifndef TOSHOBOE_H |
| #define TOSHOBOE_H |
| |
| /* Registers */ |
| |
| #define OBOE_IO_EXTENT 0x1f |
| |
| /*Receive and transmit slot pointers */ |
| #define OBOE_REG(i) (i+(self->base)) |
| #define OBOE_RXSLOT OBOE_REG(0x0) |
| #define OBOE_TXSLOT OBOE_REG(0x1) |
| #define OBOE_SLOT_MASK 0x3f |
| |
| #define OBOE_TXRING_OFFSET 0x200 |
| #define OBOE_TXRING_OFFSET_IN_SLOTS 0x40 |
| |
| /*pointer to the ring */ |
| #define OBOE_RING_BASE0 OBOE_REG(0x4) |
| #define OBOE_RING_BASE1 OBOE_REG(0x5) |
| #define OBOE_RING_BASE2 OBOE_REG(0x2) |
| #define OBOE_RING_BASE3 OBOE_REG(0x3) |
| |
| /*Number of slots in the ring */ |
| #define OBOE_RING_SIZE OBOE_REG(0x7) |
| #define OBOE_RING_SIZE_RX4 0x00 |
| #define OBOE_RING_SIZE_RX8 0x01 |
| #define OBOE_RING_SIZE_RX16 0x03 |
| #define OBOE_RING_SIZE_RX32 0x07 |
| #define OBOE_RING_SIZE_RX64 0x0f |
| #define OBOE_RING_SIZE_TX4 0x00 |
| #define OBOE_RING_SIZE_TX8 0x10 |
| #define OBOE_RING_SIZE_TX16 0x30 |
| #define OBOE_RING_SIZE_TX32 0x70 |
| #define OBOE_RING_SIZE_TX64 0xf0 |
| |
| #define OBOE_RING_MAX_SIZE 64 |
| |
| /*Causes the gubbins to re-examine the ring */ |
| #define OBOE_PROMPT OBOE_REG(0x9) |
| #define OBOE_PROMPT_BIT 0x1 |
| |
| /* Interrupt Status Register */ |
| #define OBOE_ISR OBOE_REG(0xc) |
| /* Interrupt Enable Register */ |
| #define OBOE_IER OBOE_REG(0xd) |
| /* Interrupt bits for IER and ISR */ |
| #define OBOE_INT_TXDONE 0x80 |
| #define OBOE_INT_RXDONE 0x40 |
| #define OBOE_INT_TXUNDER 0x20 |
| #define OBOE_INT_RXOVER 0x10 |
| #define OBOE_INT_SIP 0x08 |
| #define OBOE_INT_MASK 0xf8 |
| |
| /*Reset Register */ |
| #define OBOE_CONFIG1 OBOE_REG(0xe) |
| #define OBOE_CONFIG1_RST 0x01 |
| #define OBOE_CONFIG1_DISABLE 0x02 |
| #define OBOE_CONFIG1_4 0x08 |
| #define OBOE_CONFIG1_8 0x08 |
| |
| #define OBOE_CONFIG1_ON 0x8 |
| #define OBOE_CONFIG1_RESET 0xf |
| #define OBOE_CONFIG1_OFF 0xe |
| |
| #define OBOE_STATUS OBOE_REG(0xf) |
| #define OBOE_STATUS_RXBUSY 0x10 |
| #define OBOE_STATUS_FIRRX 0x04 |
| #define OBOE_STATUS_MIRRX 0x02 |
| #define OBOE_STATUS_SIRRX 0x01 |
| |
| |
| /*Speed control registers */ |
| #define OBOE_CONFIG0L OBOE_REG(0x10) |
| #define OBOE_CONFIG0H OBOE_REG(0x11) |
| |
| #define OBOE_CONFIG0H_TXONLOOP 0x80 /*Transmit when looping (dangerous) */ |
| #define OBOE_CONFIG0H_LOOP 0x40 /*Loopback Tx->Rx */ |
| #define OBOE_CONFIG0H_ENTX 0x10 /*Enable Tx */ |
| #define OBOE_CONFIG0H_ENRX 0x08 /*Enable Rx */ |
| #define OBOE_CONFIG0H_ENDMAC 0x04 /*Enable/reset* the DMA controller */ |
| #define OBOE_CONFIG0H_RCVANY 0x02 /*DMA mode 1=bytes, 0=dwords */ |
| |
| #define OBOE_CONFIG0L_CRC16 0x80 /*CRC 1=16 bit 0=32 bit */ |
| #define OBOE_CONFIG0L_ENFIR 0x40 /*Enable FIR */ |
| #define OBOE_CONFIG0L_ENMIR 0x20 /*Enable MIR */ |
| #define OBOE_CONFIG0L_ENSIR 0x10 /*Enable SIR */ |
| #define OBOE_CONFIG0L_ENSIRF 0x08 /*Enable SIR framer */ |
| #define OBOE_CONFIG0L_SIRTEST 0x04 /*Enable SIR framer in MIR and FIR */ |
| #define OBOE_CONFIG0L_INVERTTX 0x02 /*Invert Tx Line */ |
| #define OBOE_CONFIG0L_INVERTRX 0x01 /*Invert Rx Line */ |
| |
| #define OBOE_BOF OBOE_REG(0x12) |
| #define OBOE_EOF OBOE_REG(0x13) |
| |
| #define OBOE_ENABLEL OBOE_REG(0x14) |
| #define OBOE_ENABLEH OBOE_REG(0x15) |
| |
| #define OBOE_ENABLEH_PHYANDCLOCK 0x80 /*Toggle low to copy config in */ |
| #define OBOE_ENABLEH_CONFIGERR 0x40 |
| #define OBOE_ENABLEH_FIRON 0x20 |
| #define OBOE_ENABLEH_MIRON 0x10 |
| #define OBOE_ENABLEH_SIRON 0x08 |
| #define OBOE_ENABLEH_ENTX 0x04 |
| #define OBOE_ENABLEH_ENRX 0x02 |
| #define OBOE_ENABLEH_CRC16 0x01 |
| |
| #define OBOE_ENABLEL_BROADCAST 0x01 |
| |
| #define OBOE_CURR_PCONFIGL OBOE_REG(0x16) /*Current config */ |
| #define OBOE_CURR_PCONFIGH OBOE_REG(0x17) |
| |
| #define OBOE_NEW_PCONFIGL OBOE_REG(0x18) |
| #define OBOE_NEW_PCONFIGH OBOE_REG(0x19) |
| |
| #define OBOE_PCONFIGH_BAUDMASK 0xfc |
| #define OBOE_PCONFIGH_WIDTHMASK 0x04 |
| #define OBOE_PCONFIGL_WIDTHMASK 0xe0 |
| #define OBOE_PCONFIGL_PREAMBLEMASK 0x1f |
| |
| #define OBOE_PCONFIG_BAUDMASK 0xfc00 |
| #define OBOE_PCONFIG_BAUDSHIFT 10 |
| #define OBOE_PCONFIG_WIDTHMASK 0x04e0 |
| #define OBOE_PCONFIG_WIDTHSHIFT 5 |
| #define OBOE_PCONFIG_PREAMBLEMASK 0x001f |
| #define OBOE_PCONFIG_PREAMBLESHIFT 0 |
| |
| #define OBOE_MAXLENL OBOE_REG(0x1a) |
| #define OBOE_MAXLENH OBOE_REG(0x1b) |
| |
| #define OBOE_RXCOUNTH OBOE_REG(0x1c) /*Reset on recipt */ |
| #define OBOE_RXCOUNTL OBOE_REG(0x1d) /*of whole packet */ |
| |
| /* The PCI ID of the OBOE chip */ |
| #ifndef PCI_DEVICE_ID_FIR701 |
| #define PCI_DEVICE_ID_FIR701 0x0701 |
| #endif |
| |
| #ifndef PCI_DEVICE_ID_FIRD01 |
| #define PCI_DEVICE_ID_FIRD01 0x0d01 |
| #endif |
| |
| struct OboeSlot |
| { |
| __u16 len; /*Tweleve bits of packet length */ |
| __u8 unused; |
| __u8 control; /*Slot control/status see below */ |
| __u32 address; /*Slot buffer address */ |
| } |
| __packed; |
| |
| #define OBOE_NTASKS OBOE_TXRING_OFFSET_IN_SLOTS |
| |
| struct OboeRing |
| { |
| struct OboeSlot rx[OBOE_NTASKS]; |
| struct OboeSlot tx[OBOE_NTASKS]; |
| }; |
| |
| #define OBOE_RING_LEN (sizeof(struct OboeRing)) |
| |
| |
| #define OBOE_CTL_TX_HW_OWNS 0x80 /*W/R This slot owned by the hardware */ |
| #define OBOE_CTL_TX_DISTX_CRC 0x40 /*W Disable CRC generation for [FM]IR */ |
| #define OBOE_CTL_TX_BAD_CRC 0x20 /*W Generate bad CRC */ |
| #define OBOE_CTL_TX_SIP 0x10 /*W Generate an SIP after xmittion */ |
| #define OBOE_CTL_TX_MKUNDER 0x08 /*W Generate an underrun error */ |
| #define OBOE_CTL_TX_RTCENTX 0x04 /*W Enable receiver and generate TXdone */ |
| /* After this slot is processed */ |
| #define OBOE_CTL_TX_UNDER 0x01 /*R Set by hardware to indicate underrun */ |
| |
| |
| #define OBOE_CTL_RX_HW_OWNS 0x80 /*W/R This slot owned by hardware */ |
| #define OBOE_CTL_RX_PHYERR 0x40 /*R Decoder error on receiption */ |
| #define OBOE_CTL_RX_CRCERR 0x20 /*R CRC error only set for [FM]IR */ |
| #define OBOE_CTL_RX_LENGTH 0x10 /*R Packet > max Rx length */ |
| #define OBOE_CTL_RX_OVER 0x08 /*R set to indicate an overflow */ |
| #define OBOE_CTL_RX_SIRBAD 0x04 /*R SIR had BOF in packet or ABORT sequence */ |
| #define OBOE_CTL_RX_RXEOF 0x02 /*R Finished receiving on this slot */ |
| |
| |
| struct toshoboe_cb |
| { |
| struct net_device *netdev; /* Yes! we are some kind of netdevice */ |
| struct tty_driver ttydev; |
| |
| struct irlap_cb *irlap; /* The link layer we are binded to */ |
| |
| chipio_t io; /* IrDA controller information */ |
| struct qos_info qos; /* QoS capabilities for this device */ |
| |
| __u32 flags; /* Interface flags */ |
| |
| struct pci_dev *pdev; /*PCI device */ |
| int base; /*IO base */ |
| |
| |
| int txpending; /*how many tx's are pending */ |
| int txs, rxs; /*Which slots are we at */ |
| |
| int irdad; /*Driver under control of netdev end */ |
| int async; /*Driver under control of async end */ |
| |
| |
| int stopped; /*Stopped by some or other APM stuff */ |
| |
| int filter; /*In SIR mode do we want to receive |
| frames or byte ranges */ |
| |
| void *ringbuf; /*The ring buffer */ |
| struct OboeRing *ring; /*The ring */ |
| |
| void *tx_bufs[OBOE_RING_MAX_SIZE]; /*The buffers */ |
| void *rx_bufs[OBOE_RING_MAX_SIZE]; |
| |
| |
| int speed; /*Current setting of the speed */ |
| int new_speed; /*Set to request a speed change */ |
| |
| /* The spinlock protect critical parts of the driver. |
| * Locking is done like this : |
| * spin_lock_irqsave(&self->spinlock, flags); |
| * Releasing the lock : |
| * spin_unlock_irqrestore(&self->spinlock, flags); |
| */ |
| spinlock_t spinlock; |
| /* Used for the probe and diagnostics code */ |
| int int_rx; |
| int int_tx; |
| int int_txunder; |
| int int_rxover; |
| int int_sip; |
| }; |
| |
| |
| #endif |
